Just purchase a camera connection kit for my ipad2 when I hooked it up said it too much power
How do use iPad 2camera connection kit. Just hooked with Kodak camera. The iPad said it was too power to transfer these picture.
Very new for iPad usage.
Thanks. Hugh parsons
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
Then connect your camera and turn on the camera. Does it work then?
Similar Messages
-
How do I get the iPad to read the camera connection plug in
Is the kit fully inserted, and which part of the kit are you using, the SD reader or the cable to camera ? If the SD reader, then how did the photos get on the card - if you copied them on from your computer then you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them.
If you are connecting direct to the camera then does your camera have a menu setting for 'Photo Transfer Protocol' (PTP) and/or Mass Storage Device ? -
How to use the camera connection kit for iPad 3rd generation?
Hi I just bought a new camera connection kit for my iPad 3rd generation. Does anyone have any experience or knows how to use it? I tried to connect a USB to it and nothing happened. Please help...
This is how you use it.
-
Camera Connection Kit for iPad 2?
Can anyone tell me when or if there will be a camera connection kit for the iPad 2? The kits that were release for the iPad do not fit properly in the iPad 2. There is a large gap and I am worried it will eventually cause damage to the port. I could not find much online so I thought I would ask here. Thanks
There is only one connection kit, and do not seem to be any plans for adding an additional kit. Just like the 30 pin sync connector, the connection seems limited, but was never designed to leave the connector in place, especially while carting the device around. I use my original camera kit with my iPad 2, without issues.
-
Camera connection kit for ipad 2. Can this kit be used with ipad air and if so what adapter(s) are required please
You can try the 30 pin to lightning adapter but I'm not sure if that'll work. So if you get it to experiment, make sure you can return it. Apple does sell a SD to lightning adapter for the newer devices. So that should be a sure bet. The main downside is that your 30 pin camera kit came with both USB and SD for 29 and now the USB adapter is 19 and the SD adapter 29, so more expensive.
You may want to look into third party adapters, but make sure you use a reputable manufacturer (ie not a cheap no-name off amazon) because iOS7 brought with it software that looks for a signed chip in the adapter. And a chip is 'signed' when a company gets apple's permission to make accessories. I would suggest sticking with companies like Belkin, Kensington and Targus. They seem to be of a better reputation when making things and would have a signed chip. -
I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?
If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive. -
Camera connection kit for iPod touch
Do they make a camera connection kit or sd card reader for 4th gen touch
No. Neither camera connection kit parts with with an iPod. They are iPad only.
-
Can't find camera connection kit for iPad air
Feel silly asking this but went to apple on-line store and can't find the camera connection kit anywhere? I have the older version for my iPad 2 and use it with HDMI cable to watch downloaded video to our big screen tv. My son has the iPad 4 and I'm going to upgrade to the iPad air so would like to get a new kit with the lightning connector...
Can someone point me in the right direction?
Also, slightly OT, can the new iPhone 5s use the same kit to connectt to the tv to view downloads, etc.?
Many thanks,No, not at all but because that isn't what you asked for. The Camera Connection kit is to connect a digital camera or SD Card for the purpose of importing photos. If you want to connect to a television it requires something completely different.
Lightning Digital AV Adapter
HDMI is essentially DVI plus the audio channels, so yes, video + audio. -
Problems iOS5 + camera connection kit for iPad
My camera connection kit isn't working anymore since I use iOS5 on my iPad 1. What can I do?
Turn on your bluetooth and see if that works.
General
Bluetooth
Turn on
The Camera Connection Kit should show up. -
Camera connection kit for ipad mini
I have a 3 in 1 camera connection kit but it no longer works now that I have installed ios7 and it's fixes on my ipad mini. Any suggestions?
Restart your iPad by holding the power and home button until the Apple logo appears.
-
Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any helpIf you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.
-
I keep getting this error message over and over when all I have plugged in is an Apple USB keyboard and Apple Mouse. Please help...this is crippling the computer!
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
I purchased more storage space(10gb)for my IPAD,but when I attempted to download an app an error message prompted me to purchase more storage.According to my ICloud I have 15gbavailable Any suggestions Help!!!
If you are trying to download an app and get an error about not enough memory, it's talking about memory on your iPad, not in iCloud. I don't know what you mean by purchasing more storage space for your iPad, you can't add more memory to a device. You may have bought more memory in iCloud, but that's not going to fix your current problem. You need to delete songs or video, or some other large files from your iPad to make room for a new download.
-
Camera connection kit for i pad 3
Hi I had a generic camera kit but it has broke while i was trying to figure it out. I am now wanting a genuine apple one. There are some on e bay model MC531ZM/A. It has the correct 30 pin connector, but they tell me it is only suitable for i pad 1 and 2. Does anyone know anything about these thank you, the one on apple site looks just the same but i cannot find a model no for it
It should be fine. I'm not aware of different models beyond whether or not it's a 30 pin or lightning connector.
-
Is camera connection kit slower than MIDI Interface?
I have purchased the camera connection kit for use with the new iPad. I am using it with Yamaha's set list designer.
The keyboard I'm using it with is a Yamaha S 90 XS.
I have it hooked up with the USB cable through the camera connection kit.
This app sends program changes according to a set list over MIDI.
When I connected to the keyboard the iPad says this device is not compatible.
However it shows up as a device and everything works fine except that it's very slow.
I'm wondering if a MIDI interface like the Yamaha or line 6 would give me a better result.
Has anyone out there have experience using the midi interface vs. the camera connection kit?
Is either one more responsive than the other one.
Thanks and best regards,
LpianoI don't know when you used it last, but there was a firmware upgrade in 2011 that reduced the amount of power allocated to the 30 pin port - and with that the ability for the iPad to recognize and work with many USB devices that had worked before (even more confusing, articles are still out there saying such and such will work, but they were written before the upgrade)
the only work around I've seen some suggest is to use a powered USB hub, but if you've already tried that then you may just be out of luck
Maybe you are looking for
-
Problem with Pro*C Precompiler in 10gR2
To test whether my pro*c precompiler was working, I copied a sample program and tried running it through the precompiler. I am running Fedora 6 on Linux X86-64 This was what I got. proc iname=sample1.pc ltype=long Pro*C/C++: Release 10.2.0.1.0 - Prod
-
iPhoto got videos my phone doesn't and that i need. when i synchronize my photos including videos they are still not getting on my phone. i need help...
-
My iBook screen froze as I was scrolling to view selections. Can't unfreeze it. Help!
-
Problems calling a function from another function
Hello all. I am trying to create a function that will loop a few other function. Basically the main function is this private function publish(event:MouseEvent):void if (doPublish.label == 'Publish')
-
Wi Fi Dongle 600 Install 'Where's the NEXT box'?
Purchased a BT600 dongle yesterday. I inserted the DVD and followed the instructions- but when I was prompted to hit the NEXT button, I had a problem, becasue there wasn't one! I have seen another post on this subject but it didn't really help much,