JVC GZ-HD7U MPEG Streamclip export settings for use with FCP

There are a number of compression options in the free MPEG Streamclip 1.9.2 and it's unclear what's best or how I would figure that info out. My guess is Apple HDV 1080i50, Apple HDV 1080i60, Apple DVCPRO HD 1080i50, or Apple DVCPRO HD 1080i60. The default setting was Apple Motion JPEG A, but this produced a huge file and doesn't seem right anyway. I think the desired frame size is 1920 x 1080, but I'm uncertain if I need to end up with an interlaced or progressive .mov file. My selectable options for progressive/interlaced are: "Interlaced Scaling," "Reinterlace Chroma," and "Deinterlace Video." Selecting "Deinterlace Video" excludes use of the other two options.
These clips will eventually be edited in FCP and I'm guessing that the appropriate settings will match whatever is selected at the export stage.
I'm using the JVC Everio GZ-DH7U HD Hard disk camcorder...I'm not sure if JVC uses the same setting across the board for it's HD cameras or maybe just the Everio cameras are similarly designed??
Thanks to all!!

the output should match the source file, generally speaking. So if you camera is making HD files then using a HD sized coded would suffice.
HDV (IIRC) is 1440x1080. I often find that using the default settings for a particular file type in Streamclip often work quite well.
As a test, take a small file. if it works, great batch process away, if not, tweak it and then try the same small file until you get a desirable result. Rinse and repeat.

Similar Messages

  • Full-quality export settings for use with Xbox 360

    Greetings, all.
    I use Rivet to stream video from my Mac to my Xbox 360. Recently I purchased a Sony HDR-HC5 HDV camera, and I want to see that video on my TV at full quality. I don't have an HDMI cable or a DVI-to-HDMI cable, so my only option is to stream this video to the 360 via Rivet.
    To accomplish this, I have been trying to export my video at full quality from iMovie HD 6, but one of a couple things happens: 1- the resolution is intolerably low (I want 1080i), 2- the 360 complains about an unsupported format. I've tried exporting in QT format with expert settings, but no matter what I try, I have been unable to find a combination that produces 1080i that can be viewed on the 360.
    Surely somebody else on here has gone through this exercise and has figured out what works. If you have any info on this, please share! I searched through the archives and didn't find anything useful. I've also searched on Google and the answer is still elusive.
    Thanks!

    Thanks for the reply, but the Xbox will in fact view MPEG-4, which iMovie can export. The only problem I'm having is with the quality of the output. The quality is in the movie that is exported, not in the Xbox's viewing of the movie - the movie looks just as bad on my Mac mini as it does thru my Xbox...
    With experimentation, I think I'm getting closer to my goal...

  • Saving Settings for use with Export using Quicktime Conversion

    Dear All,
    Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
    All the best, Sean

    Well, you can create a droplet from Compressor that would do what you'd like...
    Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
    Jerry

  • External Hard Drive for PowerMac G5 for use with FCP Studio

    Hello,
    I'd greatly appreciate any recommendation for an external hard drive for a PowerMac G5 for use with FCP Studio.
    Thanks.
    -graziemile

    We see alot of Lacie issues here and elsewhere.
    Drives fail... period. I believe you hear more about Lacie drives failing because they sell a ton more of them than many other suppliers. I've got 8 of em sitting right here on the desk and two more at the second station. I've lost one since I started using them years ago (and it had problems right out of the box) and I use them pretty heavy.
    I understand that they use several different brands of drives in their enclosures, but from my experience they must have pretty good QC standards for what they package.
    The guy said the G Techs were a little overkill for his needs. Lacie doesn't pay me. But if someone asks "how are Lacies?" I'll tell them they've been great for me and many others I know, especially if your requirements are capturing DV.
    In five years, I ain't heard anybody say anything about it.
    As for FCP. I love it! In 20 years of business, it's probably the purchase that's given me the most bang for my buck. But if you haven't heard people knock it, you've never met an Avid zelot, bruhhhhh, just the thought gives me shivers.
    The drives X mentioned are designed for video work.
    What Studio said, well he gives out some of the best advice on this board
    (and maybe the most! ) and my reply to his post... that's why I used the little smiley face. No offence intended X.
    I only meant to say that, in a world where software like FCP can do what it does at the price it does it, and drives like Lacie and G Tech can give you the storage they do for the price they do, the line between consumer and professional products is easily blurred.
    rh

  • Mpeg Streamclip DVD settings for FCP...trying to preserve quality

    I'm very new at editing, so please bear with me!
    I am creating a director's reel for myself using footage on DVD. I'm ripping the DVDs with MPEG Streamclip to DV NTSC then importing to FCP and finally exporting to DVD.
    My problem is--there is an egregious quality loss through this process. Basically is there a better codec than DV NTSC to use in MPEG Streamclip?
    I'm having to render my clips in Final Cut which leads me to believe I'm adding an unnecessary step of compression/de-compression. Also, the DV NTSC quicktime doesn't look so bad until I put it in Final Cut...then it looks awful. Am I messing up an import setting?
    Finally-- When I load my clip in final cut it loads it anamorphic and I'm having to right click my clip after I load it to the bin, search it's video settings, and de-click "anamorphic" in order to get the right aspect ratio (16:9)...am I doing something wrong there?? Is that messing with the quality?
    I realize that this is a basic question, but I literally have spent 3 hours searching for an answer and haven't found one, so please forgive me if it's repetitive! And obviously I'm stuck using the DVDs...I have no option to get the uncompressed original footage. Thanks!!

    razini wrote:
    I'm very new at editing, so please bear with me!
    No problem, we all were at one time. Welcome to the family.
    razini wrote:
    I'm ripping the DVDs with MPEG Streamclip to DV NTSC then importing to FCP and finally exporting to DVD.
    My problem is--there is an egregious quality loss through this process. Basically is there a better codec than DV NTSC to use in MPEG Streamclip?
    Shouldn't be. But transcoding form MPEG2 to DV can get messy. I use DVDxDV for unwrapping MPEG2 form DVDs.
    razini wrote:
    I'm having to render my clips in Final Cut which leads me to believe I'm adding an unnecessary step of compression/de-compression. Also, the DV NTSC quicktime doesn't look so bad until I put it in Final Cut...then it looks awful. Am I messing up an import setting?
    You should not be rendering in FCP, this suggests your sequence is not set to be plain ol' DV.
    razini wrote:
    Finally-- When I load my clip in final cut it loads it anamorphic and I'm having to right click my clip after I load it to the bin, search it's video settings, and de-click "anamorphic" in order to get the right aspect ratio (16:9)...am I doing something wrong there?? Is that messing with the quality?
    If your clips are not anamorphic, your sequence is set incorrectly. Start with a new sequence and make sure it is set to DV.
    razini wrote:
    I realize that this is a basic question, but I literally have spent 3 hours searching for an answer and haven't found one...
    Yeah, video is like that.
    bogiesan

  • MPEG streamclip export settings

    I realize this is not an MPEG streamclip forum, but there is a FCE question embedded in my post somewhere. I'm converting M2T HDV files in MPEG Streamclip to edit in Final Cut Express. I've used several different export options in MPEG Streamclip, but all of them are requiring rendering in FCE. What is an export format in MPEG Streamclip that I can edit natively in FCE?
    Any help would be greatly appreciated!
    Katie

    When I select export to Quicktime there isn't a 720x480 Anamorphic frame size. There's 854x480 in both the 16:9 and unscaled options, and there's a 720x480 DV-NTSC frame size, but there isn't one that says both. Also, the default compression is Apple Motion JPEG A: I don't see a DV-NTSC codec in the drop down menu for compression. Is there something I'm missing?
    Thanks for enduring!
    Katie

  • CS4 MPEG 2 export settings for video captured by sony cybershot dsc-w35

    Hi,
    I am trying to export a project (which contains video captured by my sony cybershot dsc-w35 digital camera) in MPEG 2 format (not sure if there is a better format I should be using, but I tried to do it in AVI before and the resulting file was way too large), and the resulting exported file always comes out with choppy video. The video capture settings for my cybershot camera (and thus the source video in my project) are:
         - VGA (640 x 480)
         - framerate: 25 fps
    At the outset, I am using DV (only other option is HDV) as capture format, and I selected DV-PAL: Standard: 48 kHz as my Sequence preset. I have no idea if thi is the appropriate preset for me to be using, but it seems logical since its timebase is 25 fps and it says a 4:3 video ratio in the description, and almost every other preset seems to be intended for HD video and higher framrates or ratios, etc.
    At the export stage, I select MPEG 2 format, and other than that I really have no idea what settings I should be using. I set the preset to Custom and under the Video section I switch the framerate to 25 and the pixel aspect ratio to 4:3. Everything else I pretty much leave the same.
    Can anyone tell me why the export file always comes out choppy? (it is not choppy when I watch it in Premiere itself). I must be either using the wrong preset at the beginning or in the export stage (or both). The VGA capture setting of my camera seems like it might be an issue as none of the presets in Premiere appear to accomodate it. Any help is sincerely appreciated!

    Thanks for the prompt response, Hunt.
    The spec sheet you referred to is actually for the Sony cybershot dsc-w350, whereas my camera is the sony cybershot dsc-w35. that's probably the reason for the discrepancy. When looking at the properties of the source video I am using it says 25 fps, so does this mean I should be using a PAL preset in the export stage? I see what you mean about using a Desktop (custom) preset for the sequence preset, and for this I set the framerate to 25, frame width to 640 and height to 480 (to match my camera settings), but what should I set the pixel width to?
    In the export stage, I select custom preset again, but within this there are lots of options (mostly under the Video tab) I am unsure about. Should I be using PAL instead of NTSC since I'm using a 25 fps framerate? I can also scroll video quality anywhere from 1 to 5, any ideas? I can also choose various pixel aspect ratios here and then there are a bunch of bitrate settings I am totally cluseless about. Also, under the Multiplexer tab, there is an option between constant and variable bitrate types, which should I use? Thanks again

  • Export settings for sequence from FCP to Avid PC

    Hi,
    Please can someone give me the best export settings/codecs to use if I need to export a FCP sequence with clips shot on XDCam EX1, 1920x1080i, 35 mbs at the least quality loss possible so that it can be imported into an Avid on PC for titling, effects and other bits added? My on-line editor is on Avid PC.
    Many thanks
    Belinda

    Hee....missed that final sentence somehow.
    So...offlining imported footage on FCP that you will online in Avid? What is there to online? You imported at full resolution. Must be color correction.
    OK then...you edit in FCP from imported XDCAM EX footage...and you intend to go to Avid for the final color correct and titling. Did you plan for this? Test this? because I am pretty sure that the QT files that were created when you imported with the transfer tool won't work on a PC. Unless you tested and they did. But it appears that they don't as you are asking how to get them there.
    Did you not ask this question when you started this show? That is ALWAYS something you do. If you plan on doing a certain workflow, you have to make sure that the workflow in question will work. Offline and online from tape is fairly simple, as you can recapture from the tape...timecode being the big thing there. But this is IMPORTED footage. Full clips, and I don't see how you can import only what is used in a sequence.
    This issue, coupled with FCP to Avid...and Avid on a PC no less. Well. Find a codec you can export from FCP that the Avid can read (this will require testing), then MEDIA MANAGE the footage to that codec. Hmm....but then how will the Avid read the FCP project file to reconnect to the footage?
    Nope...I stand by my original answer. Output to XDCAM disk and recapture, or to HDCAM or HDCAM SR tape and recapture.
    Shane

  • Exporting files for use in FCP 7

    I'm working on an animated project right now where I draw individual images in Photoshop, save them as PNGs, and then bring them into AE CS4 as image sequences. I now have a bunch of individual scenes that I want to trim and edit in FCP 7, but I keep having problems trying to open the .mov files in Final Cut. I've been using the Animation codec to maintain quality, but FCP can't seem to open all of the files.
    Oddly, it can import some of these scenes (seemingly at random, I use the same settings for each) but others get the error message: File Error: 1 file(s) recognized, 0 access denied, 1 unknown. I know this question should maybe be posted at an FCP forum, but I was wondering if I would have better results using different settings to export out of AE? Perhaps 10 bit uncompressed or just PNG sequences? There is no sound to worry about as of yet...
    Thanks in advance!

    Midnighttrain wrote:
    …  MPEG Streamclip, & something about needing to separately download an MPG2 converter for it w/ Lion or Mountain Lion - the process sounded confusing …
    MpegStremclip is THE Swiss Army Knife, when it comes to conversion, a 100% reliable, it IS absolutely free (any download a dollar = Stefano would be a millionaire!), I dare to say it is THE most recommended 3d party tool in the editor community ....
    How & why you need to install the mp2 plug-in does Signore Cinque explain in simple words on his website:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html

  • Lazy Nezumi - settings for use with CC

    I am finding it hard to find my way round way this software - the incomprehensible (to me) manual doesn't help - and I'd be grateful for a steer on what are good default settings for smoothing curves in freehand drawing.  None of the settings seem to help or have a simple and useful effect for freehand work.
    Can I assume that it only works with the brush tool and not with other tools like the Art History Brush?
    I know Trevor D has mentioned this software a couple of times.
    Thanks.

    David, you had me wondering there.  I don't think I have ever used the Art History brush.  I did try though, and initially thought LNP did not work with that tool, but with high settings I could see that it does.
    For smooth lines use the Massive Smooth preset with mode set to Moving Average.  The default values are good for the Brush tool, but seem to work better with much higher 'Amount' setting for the Art History brush.  But I have no experience with the Art history brush, and don't even have a clear idea how it works.
    Lazy Mouse with the Pulled string mode, are used for smooth lines with abrupt changes of direction.  You have to stop and move the cursor back a touch to take the tension out of the pulled string. Then move in the new direction and when the pulled string becomes taut the line will follow the cursor again. 
    Actually, the animated gifs on the site explain it better than my words
    Pulled String:
    Moving Average
    Moving Average + Catch Up
    I don't think that Guilaume ever sleeps.  He has never taken more than 30 minutes to reply to an email, even on Christmas day!  He is super helpful, and tends to respond immediately if you use the LNP Chat facility.
    If you check out the Feedback page, you'll find lots of LNP users that do 'similar' work to you, although I have to say none that were quite like your beautiful painterly type artworks.  You'll possibly recognize some of the names, and maybe swap some ideas with them.  It's quite a little community, but there isn't a forum unfortunately.
    I am not sure how relevant they will be to your work, but do check out the Constraint presets.  For line drawing I find they are really useful.
    Lazy Nezumi Pro - User Testimonials
    Having spoken nicely about your work David, it's only fair we let other users take a look
    New Artwork photoart,digital painting,drawing,sketches,
    But bottom line is to not hesitate to contact Guilaume if you need help.  He will definitely get back to you.
    [email protected]

  • Buying used G4s for use with FCP

    How well does FCP take advantage of dual-processor capabilities? I'm debating getting a G4 dual 533 vs. a G4 1.0 GHz machine. Which would work faster? Or are they both too painfully slow to even be worth it?
    Thanks for helping the new guy!

    My G4/400 is now 5 years old (I upgraded the processor last year to 1.5 Ghz). It works extremely well with FCP 5.0.4 with my particular setup - certainly very very usable and not at all painfully slow. But I'm not editing Hollywood blockbusters.
    The only limitation is that I can't install Motion, but I knew that before I bought FCStudio.
    Don't know anything about comparable performance of old dual-processor G4's.
    Reagrds
    Robert
    How well does FCP take advantage of dual-processor
    capabilities? I'm debating getting a G4 dual 533 vs.
    a G4 1.0 GHz machine. Which would work faster? Or are
    they both too painfully slow to even be worth it?
    Thanks for helping the new guy!

  • Best Macbook Pro for use with FCP X for the money?

    I am on a budget, but don't want to be frustrated with FCP X being slow or crashing. What Macbook pro configuration would you recommend? I'm currently considering 4 15" configurations that are below, but am open to any suggestions. I figure I can always get an external drive to upgrade the RAM, so I'm keeping that low to save. What processors, HD and video cards does everyone recommend? Thank you!
    #1
    2.2GHz Quad-core Intel Core i7
    4G
    500GB Serial ATA Drive @ 5400 rpm
    AMD Radeon HD 6750M with 512MB GDDR5
    #2
    2.2GHz Quad-core Intel Core i7
    4G
    750GB Serial ATA Drive @ 7200 rpm
    AMD Radeon HD 6750M with 512MB GDDR5
    #3
    2.4GHz Quad-core Intel Core i7
    4G
    750GB Serial ATA Drive @ 7200 rpm
    AMD Radeon HD 6770M with 1GB GDDR5
    #4
    2.4GHz Quad-core Intel Core i7
    4G
    500GB Serial ATA Drive @ 5400 rpm
    AMD Radeon HD 6770M with 1GB GDDR5

    Don't skimp on memory.
    I personally use OWC for almost all of my Mac upgrades, especially memory and SSDs.
    I'd highly recomend getting 16GB. You only have two slots, so it's not like you can add memory, you have to replace memory. I've seen many users post issues with FCP X who simply don't have enough memory.
    http://eshop.macsales.com/item/Other%20World%20Computing/1333DDR3S16P/

  • What are the best export settings for video with small text?

    I am making videos of lectures (where slides show up next to a small video of a person talking). I would like the text to show up as legibly as possible, all while maintaining a small file size (smallest possible) and still maintaining quality. What would you recommend? The slides change every couple minutes or so, but I don't wnat to reduce the frame rate becuase I do have that small video in the corner. Which settings and format are best? Also, I'll be uploading this to Youtube.
    THANKS!

    Keep in mind that the small video in the corner does not require as high a data rate as a full screen video. So, if a full screen video requires, let's say 5Mb/s for a talking head, you might be able to get away with 2Mb/s or less for the entire frame with a little video and a lot of static slide. Also remember that the less motion in the video, the lower the bit rate can be.
    Try it out.
    Use the H.264 preset for YouTube at the same frame size as what you are editing, and then reduce the data rate to half normal. Export and check out the quality. Then halve it again and check the quality. Keep going until the quality is unacceptable then go up a little. Find your sweet spot.
    It is subjective. You have to decide the lowest bit rate you personally can accept and still be confident that the client will be OK with it.

  • Garage Band Preference settings for use with Reason

    i am trying to get my settings right in both GB and Reason so that i can record my reason samples into GB . So far i finally learned from you folks how to play the samples in either GB or R using of course my Keyboard and ii know to start GB first so it is master ,, Having done that , i can see that GB does recognize that i am pressing the keys even when playing the Reason sounds but the reason sounds are not showing up as a signal on the GB volume controls ,, all that shows is that little dot when i press a key next to the tempo .. So far i am thinking that i need my Generator setting in GB set to : AU NET RECEIVE ( ??? ) The Reason preference's under advanced MIDI are also ??? but under External Control in Reason , i need to know for Bus A , B , C , D which to have set at my : Kontrol 49 MIDI IN and which of the A,B,C,D BUS's to have set for : KONTROL 49 PORT A and/or KONTROL 49 PORT B . Thankyou much and i hope you all have a great rest of the day : ) Steve

    Well, you can create a droplet from Compressor that would do what you'd like...
    Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
    Jerry

  • Export options for use with Windows Media Player

    In Captivate 5, what formats can be exported to (now that AVI is no longer a choice) that will work with Windows Media Player? Unfortunately a Flash based file is not an option in this instance.

    Hi there
    You could publish from Captivate as FLV or F4V, then use a conversion utility to convert to AVI if you want.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

Maybe you are looking for