JVM 1.4.2_b28 crash on windows

I am running an application on a windows 2000 server. We recently upgraded from 1.3.1 to 1.4.2_b28 (hotspot server). In 1.3.1 it ran fine, under 1.4.2_b28 it is crashing about every 36 hours. We are running the application as a service and do not get any logging of the error by the jvm, just by dr. watson. So a couple guestions:
1) Is there anyway to get additional logging with out running through a debugger or putting in verbose mode?
2) Any ideas on the following errors or how to get more out of the dr. watson logs:
(14fc.2c00): Access violation - code c0000005 (!!! second chance !!!)
eax=0069007a ebx=00a0a878 ecx=1001fbc8 edx=0069007a esi=1001fbc8 edi=00000004
eip=08043b27 esp=2c2bfc10 ebp=2c2bfc64 iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000202
*** WARNING: Unable to verify checksum for jvm.dll
*** ERROR: Symbol file could not be found. Defaulted to export symbols for jvm.dll -
jvm+0x43b27:
08043b27 8b4230 mov eax,[edx+0x30] ds:0023:006900aa=????????
0:003> u 08043b27
jvm+0x43b27:
08043b27 8b4230 mov eax,[edx+0x30]
08043b2a 85c0 test eax,eax
08043b2c 7f2a jg jvm+0x43b58 (08043b58)
08043b2e 7d20 jge jvm+0x43b50 (08043b50)
08043b30 83c9ff or ecx,0xffffffff
08043b33 2bc8 sub ecx,eax
08043b35 8b4608 mov eax,[esi+0x8]
08043b38 d3e0 shl eax,cl
0:003> r
eax=0069007a ebx=00a0a878 ecx=1001fbc8 edx=0069007a esi=1001fbc8 edi=00000004
eip=08043b27 esp=2c2bfc10 ebp=2c2bfc64 iopl=0 nv up ei pl nz na pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000202
jvm+0x43b27:
08043b27 8b4230 mov eax,[edx+0x30] ds:0023:006900aa=????????

I should have been more specific....we are running an application as a service and there is a wrapper around the jvm. So it is not generating an hs_<err>_,pid_.log....there is also nothing witten to the standard error. Which is where exceptions are normally thrown for us. I am going to try upgrading our prod env to see if it hellps....but just trying to nail down root cause to be sure that it will solve our issue.

Similar Messages

Help: WebLogic 5.1 crashes in WIndows NT

Hi all,
we're having serious problems with WL Crashes in Windows NT
environment. Sometimes the system is running stable for days,
and sometimes it crashes several times within an hour.
Is WL or JDK(jvm) causing this problem? How and where can I
find the solution?
Our System configuration:
JDK 1.3.0 with HotSpot 2.0
Weblogic 5.1
Windows NT 4.0 , MSSQL server 7.0
Thanks in advance.
Best Regards,
Zhou
Here is the output for the thread that crashed (from Dr. Watson program
log):
State Dump for Thread Id 0x97
eax=2d61c6a8 ebx=77f57540 ecx=7ff9c000 edx=2d61c6a8 esi=2d61c698
edi=2d050a48
eip=77f5754b esp=2a86fe14 ebp=2a86fe5c iopl=0 nv up ei pl nz na pe
nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000
efl=00000202
function: RtlEnterCriticalSection
77f57540 648b0d18000000 mov ecx,fs:[00000018]
fs:00000018=????????
77f57547 8b542404 mov edx,[esp+0x4]
ss:2b6be81b=????????
FAULT ->77f5754b 837a1400 cmp dword ptr [edx+0x14],0x0
ds:2e46b0ae=????????
77f5754f 754f jnz RtlEnterCriticalSection+0x60
(77f575a0)
77f57551 90 nop
77f57552 ff4204 inc dword ptr [edx+0x4]
ds:2e46b0ae=????????
77f57555 7519 jnz RtlEnterCriticalSection+0x30
(77f57570)
77f57557 8b4124 mov eax,[ecx+0x24]
ds:80deaa06=????????
77f5755a 89420c mov [edx+0xc],eax
ds:2e46b0ae=????????
77f5755d c7420801000000 mov dword ptr [edx+0x8],0x1
ds:2e46b0ae=????????
77f57564 33c0 xor eax,eax
77f57566 c20400 ret 0x4
77f57569 2e8bc0 mov eax,cs:eax
77f5756c 2e8bc0 mov eax,cs:eax
----> Stack back Trace <---
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
2a86fe5c 503cdf1a 00000000 29cdd0f8 2d069a20 29cdd100
ntdll!RtlEnterCriticalSection
2a86fe80 503a644a 29da1590 50294b63 29cdd0f8 29e305c8 !JVM_FindSignal
2a86feb4 503d51c8 1451faf8 2b0cc51c 00000003 29da1590 !FindStickySystemClass
29cdd0bc 2d069a20 14999f30 00000000 2d069a20 2b0c7310 !JVM_FindSignal

Hi,Even i'm getting the same problem. Have u solved the problem ?if yes, plz. let me know abt it....thanx a lot-radhika

Application crashes in Windows 7 64bit made in Labview 2010 sp1 f2 with Fault module name%3A lvrt.dll%2C version 10.0.0.4033 and exception code c0000005

I build an application exe and then its installer along with run time environment.
The installers instals the application correctly but when I try to execute the application, I get an error that application has crashed and Windows must close it down or search for solutions online with this additional information for the crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: AGMS.exe
Application Version: 1.3.0.0
Application Timestamp: 4c24e8f5
Fault Module Name: lvrt.dll
Fault Module Version: 10.0.0.4033
Fault Module Timestamp: 4c9273f4
Exception Code: c0000005
Exception Offset: 00005310
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I am using labview 2010 sp1 32 bit on a 64-bit machine, with the following specs
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dell System XPS L502X
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (8 CPUs), ~2.0GHz
Memory: 8192MB RAM
Available OS Memory: 8106MB RAM
Page File: 3457MB used, 12753MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
The exe /application runs fine on my PC but when I try to run it on another PC it crashes. The other PC has similar specs as given below
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: HuronRiver Platform
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz (4 CPUs), ~2.2GHz
Memory: 4096MB RAM
Available OS Memory: 4010MB RAM
Page File: 1359MB used, 6658MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
I tried another machine, 64 bit of course, as I want to deploy my application on a 64bit PC, but still got the same problem.
This other machine was from HP, iCore 3 (4 CPUs) 2.2GHz, 4GB RAM and running Windows Professional 64 bit.
Now as I see it, it could be a Run-time environment mis-match error.
For this I tried installing a 64 bit LVRTE from NI, but still no sucess.
I checked DEP, for all 3 PCs and it was set to the following
Turn on DEP for essential Windows programs and services only (first option).
I am confused. I can not find a solution for this and it is really frustrating.

But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error.

Firefox was working fine in the morning, after half a day, it just crashed and now every time i try to start FF it crashes, i reinstalled FF, even tryed FF 4 beta, every time same crash report window, and nothing happens.

After a half day working normally, FF just crashed, and now i reinstall it, even tryed FF 4 beta, and still getting crash report. Cant even start in safe mode, same crash report window pop up.
Checked for viruses, malwares. Nothing helped.

Other applications print okay? If so, try deleting the Preview .plist
You need to look in your user Library/Preferences for the .plist. Hold down the option key while using the Finder "Go To Folder" command. Enter ~`/Library. Delete the .plist(s) for the application.
If you prefer to make your user library permanently visible, use the Terminal command found below. It does work with Mountain Lion:
http://osxdaily.com/2011/07/22/access-user-library-folder-in-os-x-lion/
You might want to bookmark the command. I had to use it again after I installed 10.8.2. I have also been informed that if you drag the user library to Finder it will remain visible.

I'm getting popup notices that Firefox has a problem, and Windows is looking for a solution; then it closes Firefox and says Windows will let me know if it finds a solution. No crash report window comes up.

Firefox is my default browser on my new laptop, with OS Windows 7. I've now had several instances where a Windows popup comes up saying Firefox has developed a problem and may have to close. It also indicates Windows "is looking for a solution to the problem." No solution is found, however, and Firefox is forced to close, with the happy notice that Windows will let me know if it finds a solution to the problem. If there is any tech data on the crash, I'm not sure where to find it, and no Firefox crash report window comes up. I thought it was an anomaly the first time, but this has now occurred at least 4 times in the past several days.

See:
* https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.

Team,
Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.
I have tired.
1. Updating Intel Graphics Card. (unsuccessful)
2. Logging in and out of creative cloud. (unsuccessful)
See log below.
Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
Faulting module name: ntdll.dll, version: 6.3.9600.17278, time stamp: 0x53eebd22
Exception code: 0xc0000005
Fault offset: 0x0000000000024ac8
Faulting process ID: 0x1448
Faulting application start time: 0x01cfe6c7bd37e765
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report ID: 072b7ff9-52bb-11e4-825f-600292e27add
Faulting package full name:
Faulting package-relative application ID:

Well it came installed on my brand new Windows 8 pro w530 I received 4 weeks ago and has never worked. When you try to open power manager it just crashes. If you uninstall it the Lenovo software just keep reinstalling it. If you uninstall the Lenovo PM driver but do not reboot you can then open Power Manager. The minute you reboot the Lenovo software reinstallls the driver.
Why would Lenovo install software on a brand new Windows 8 laptop that is broken and useless? Tech support is absolutely no help they transfer you to the software department which wants to charge you to fix a problem that Lenovo created!!! It is crazy!! I was hoping someone here could solve this problem or maybe someone at Lenovo would see this and get the problem resolved. Tech support has been useless. I reported the problem to them at least 5 times.

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )

Itunes keeps crashing with Windows 8.1 and doesn't recognize my iphone or ipad to syn. Frustrated!!!

After new Itunes update ... it keeps crashing with Windows 8.1 and doesn't recognize my iphone or ipad to syn. Frustrated!!! I have unninstalled it .. installed it, but nothing happens. I even loaded an earlier itunes version, it worked without crashing, but it still did not recognize iphone or ipad.

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

PlayMemories Crashes on Windows 8.1 64 Bit

PlayMemories is crashing on Windows 8.1 64 Bit. It crashes as soon as I start it up, with "Browser Stopped Wiorking".
From Windows Event Log:
Faulting application name: PMBBrowser.exe, version: 9.2.0.2052, time stamp: 0x54d349d3
Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2be1e
Exception code: 0x40000015
Fault offset: 0x0008d6fd
Faulting process id: 0x352c
Faulting application start time: 0x01d051e3319a6d63
Faulting application path: C:\Program Files (x86)\Sony\PlayMemories Home\PMBBrowser.exe
Faulting module path: C:\Windows\SYSTEM32\MSVCR100.dll
Report Id: 70ec99c0-bdd6-11e4-826d-8086f23f5dda
Faulting package full name:
Faulting package-relative application ID:
This is the only application I'm having trouble with. The error occurrs as soon as the software starts up.
How do I fix this?
The problem with using Explorer to copy the files from the camera disc is that the raw files are in a format that
my movie making/DVD burning software doesn't recognize. Using PMB on my older computer isn't really an option, because the files are big and hard to transfer to this computer. Is there any other way to import movies from the camera onto my computer?

Hi,
This particular question pertain to Windows 10 Preview. Please post your question on this link
http://answers.microsoft.com/en-us/windows/forum/windows_tp?auth=1.
So that experts will be able to help you better.
Regards,
Bharath

Adobe acrobat pro 9.2 crashes in windows xp sp3 when closing a pdf

Adobe acrobat pro 9.2 crashes in windows xp sp3 when I close a pdf. This means that if I have multiple files open, all of them close. I get an error message from windows that the problem is due to windows' Data Execution Prevention (DEP). I tried making Adobe an exception to windows' DEP and re-started the computer but this did not help the problem. Any ideas about how to fix this problem?

So.. If we want to control the "hardware graphics acceleration", should it be done inside the Adobe Acrobat Pro ?
If yes, which part of option should we changed ?
If not, can someone tell me which way to setting this one ?
Do anybody have other input ? This problem makes me crazy
Thank you so much in advanced.

Forms Builder 10.1.2.3 Crash in Windows 7

Followed the installation steps mentioned in metalink note: 559067.1 [How to Install Developer Suite 10.1.2.3 on Windows Vista or Windows 7 ].
Followed the installation steps till point 7.
After the installation when I tried opening the forms builder (ORACLE_HOME/BIN\frmbld.exe) it immediately crash after oracle logo with the error message "Oracle Forms Designed had stopped working"
Machine details:
Windows 7 Ultimate 64bit
Macbookpro 2012
This is urgent. Any quick help is highly appreciated.
Thanks
Lakshmanan AK

I've installed Oracle Developer Suite (ODS) 10g R2 on numerous Windows 7 systems and have only encountered an issue with Forms Builder crashing a couple of times. Each time, I've been able to resolve the problem by modifying the OS PATH environment variable to ensure there is not a conflict between Oracle versions. If you only have ODS 10g installed, this should not be a problem, but if you have different versions of Forms installed - this could very well be the problem. My you might want to take a look at the OS PATH and make sure all Windows related directories are listed first. Then list the ODS directories second and lastly, list everything else. Oracle has a bad habit of putting it's program directories before the operating system directories.
It is also possible that your installation media is bad since your install is crashing in Windows XP mode as well. That being the case, you may want to download the installer again.
Craig...

TS1717 iTunes 11 and Windows 7 (32 bit). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed").

iTunes 11.0.1.12 and Windows 7 (32 bit, latest version). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed"). I may be trying to search for an App. or book (or anything else), trying to access iTunes store, checking for updates to Apps., inputting my password, etc. etc. I have uninstalled iTunes several times, reinstalled several times, but the error persists. I tried the iTunes 10 suggested fix of running in safe mode, but iTunes again crashed when I was trying to create a new ID.
Any real help would be gratefully received. Thank you.

Still having this issue

Itunes keeps crashing with windows 7

iTunes 7 keeps crashing on windows 7. please help.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

ITunes crash with windows 8

GOOD NEWS
I have a solution to settle the iTunes \ iStores crash with Windows 8.1, 8.0 or 7 because of a file missing

Hey Captain Kenny,
I would follow the External drive section in this link to transfer the music to your new computer:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Lightroom 4.4 crashed on Windows 7 Laptop, lost catalog info, won't import half my images.

Lightroom 4.4 crashed on Windows 7 Laptop today, lost catalog info, won't import half my images.
Not only is LR messed up, it deleted my day's shooting. Can't believe that.
Now it won't import (i.e. re-import) half my files.
Imported half, but had errors importing rest.
Corrupt catalog?
When I try to import the folders, it recognizes that they are in the catalog (I have "don't import duplicates" turned on).
After running through all the folders, it says, "Nothing to Import."
Any help?
Best,
Peter

Thanks dj_paige.
I installed a plugin, coincidence makes me thinks this might have cause a LR4.4 crash.
After rebooting my windows 7 laptop, LR had lost record of half my directories on the external drive, as seen in Library Module.
In Windows Explorer, the folders and images are still there.
I tried recovering the lost folder references in LR by doing an import on the external hard drive again.
It took about a half hour to run.
There was a report screen at the end of the process that said that LR was unable to import something like 1500 images.
I did not save the report screen. Maybe it is part of a log file somewhere to give you what it exactly said?
I do not profess to understand how catalogues work under the covers.
I only use one catalog at this point.
My guess is at this point I should de-commission the catalog (whatever it takes to do that - delete it, etc.) and just do a new, fresh import on my images.
I don't feel I lose anthing this way - I can't see where I would lose anything important. About 5-10% of the RAW images were processed and exported to jpg, just for web use for casual viewing. The jpg's are all still on the external hard drive.
Any suggestions are appreciated.
Cheers,
Peter

JVM 1.4.2_b28 crash on windows

Similar Messages

Maybe you are looking for