JVM execution engine

Hi,
I have Java 1.6 installed on my machine and would like to find out the type of execution engine (i.e just-in-time, adaptive optimizer etc) that the installation uses. Is there a way of doing that?
Thanks in advance for your help,

cer-albastru wrote:
I have Java 1.6 installed on my machine and would like to find out the type of execution engine (i.e just-in-time, adaptive optimizer etc) that the installation uses. Is there a way of doing that?Per the VM itself? What makes you think that it will only use one? And what difference would it make even if you knew?

Similar Messages

Difference between JIT compiler and Execution engine...

where does bytecode get generated???is is in the JIT compiler or in the execution engine???What actually is the process happening inside JVM???can anybody help me in knowing this???

where does bytecode get generated?Bytecode is the output of javac, the j2se sdk java source compiler.
is it in the JIT compiler or in the execution engine?No, and No.
What actually is the process happening inside JVM?The bytecode of the classes to be used
is loaded and verified
For an application the main() method of the primary class is launched.
can anybody help me in knowing this?Unknown.
We can tell you the answers to the questions you seem to be asking.
It would help if you could be a bit more specific.

Process execution engine execution error. from the latest HF in BPM Ent.

Hi All,
After applying the latest hotfix, I'm now getting this error when trying to launch any of the application.
My setup is AquaLogic BPM Enterprise 6.0.4 for Weblogic.
I've tried redeploying all the deployments within Weblogic and also the Admin Center. Nothing has worked.
Any idea what's causing this?
Process execution engine execution error.
Caused by: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
fuego.papi.impl.EngineExecutionException: Process execution engine execution error.
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:158)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
at $Proxy154.runGlobalActivity(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.JavaObject.invoke(JavaObject.java:227)
at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3368)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2117)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2023)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: java.lang.NoSuchMethodError: fuego.io.ObjectSerialization.customWriteObject(Ljava/lang/Object;Ljava/io/ObjectOutputStream;Ljava/lang/Class;)V
at BT_QW.MyProcess.Default_1_0.Instance.writeObject(Instance.xcdl)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:890)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1333)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1284)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1073)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:291)
at fuego.server.ProcInst.getComponentData(ProcInst.java:780)
at fuego.server.ProcInst.mustStoreComponent(ProcInst.java:2793)
at fuego.server.persistence.jdbc.JdbcProcessInstancePersMgr.createInstance(JdbcProcessInstancePersMgr.java:1018)
at fuego.server.persistence.Persistence.createProcessInstance(Persistence.java:669)
at fuego.server.execution.EngineExecutionContext.persistInstances(EngineExecutionContext.java:1810)
at fuego.server.execution.EngineExecutionContext.persist(EngineExecutionContext.java:1109)
at fuego.transaction.TransactionAction.beforeCompletion(TransactionAction.java:132)
at fuego.connector.ConnectorTransaction.beforeCompletion(ConnectorTransaction.java:685)
at fuego.connector.ConnectorTransaction.commit(ConnectorTransaction.java:368)
at fuego.transaction.TransactionAction.commit(TransactionAction.java:302)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:481)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2708)
at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:1036)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.runGlobalActivity(EJBProcessControl_1zamnl_EOImpl.java:3450)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_1000_WLStub.runGlobalActivity(Unknown Source)
at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runGlobalActivity(EJBProcessControlInterfaceWrapper.java:2033)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
... 39 more

I ended up rebuilding my ALBPMDir and ALBPMEngine schemas and WebLogic server domains from scratch. When executing the process that was giving me a headache, all of a sudden I got the following error:
fuego.server.exception.MaxInstanceSizeRuntimeException: Max instance size exceeded.
Current size is 16538, whereas the maximum size is 16384. This occurs with instance '
Anyway, the sizes were not terribly far off, but I doubled the process instance size from 16k to 32k and the error went away.
Something to try on your end, perhaps.
Chris

"fatal execution engine" error when launching labview--I just installed it?

I just installed Labview (I still have the CD in my computer) but when I double click the icon to start the program it starts the splash screen, but then issues an "internal execution engine fatal error." The only option to enter is into the JIT debugger. I have XP/SP2 and I have uninstalled my C/C++ compiler and my Ada Compiler, but I am still receiving the error. I have uninstalled Labview twice and reinstalled it, but still the same. The disk that I am installing is labeled 7.1, so I went to the website and downloaded 7.1.1 and installed it but still the same error. I tried to install Labview barebones (without drivers, CVI, etc...) but this didn't fix my problem either. I am out of ideas.
Ronnie_b

Hey Ronnie,
I know Marni personally, and I'm sure she's done her homework on this one. Unfortunately with this being an issue specific to your PC, it does sound like it might be one of those issues that is unidentifiable and seemingly "incurable" without reformatting. However, I'll double check with Marni tomorrow to make sure we've exhausted all possibilities before having you reformat.
I'll get back with you via this post.
Take care,
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments

XI = BPEL execution engine?

Hi,
XI allows to import and export business processes as BPEL. Does anybody know if XI hosts a reals BPEL execution engine under the hood (i.e. when I define a process in the repository, are BPEL files generated ready to be executed)?
Kind regards,
Heiko

Hi Heiko,
currently XI translates every ccBPM created in Integration Builder to a SAP Workflow on the ABAP side, so i guess, there are no BPEL files created and then executed.
Best regards
Christine

Starting OBPM 10g Execution Engine the first time

After upgrading to OBPM10g from ALBPM5.7, I'm getting this error in the webconsole.log when I try starting the execution engine. It is complaining about the "looknfeel" not being valid but I'm wondering if that is the problem. Any help is appreciated.
[<D> 0805 12:14:46.333] Main (<8> http-8686-Processor21): title:Start
[<D> 0805 12:14:46.333] Main (<8> http-8686-Processor21): title:Stop
[<D> 0805 12:14:46.334] Main (<8> http-8686-Processor21): title:Thread Dump
[<D> 0805 12:14:46.334] Main (<8> http-8686-Processor21): title:Startup Log
[<D> 0805 12:14:46.335] Main (<8> http-8686-Processor21): title:Start
[<D> 0805 12:14:46.335] Main (<8> http-8686-Processor21): title:Stop
[<D> 0805 12:14:46.335] Main (<8> http-8686-Processor21): title:Thread Dump
[<D> 0805 12:14:46.335] Main (<8> http-8686-Processor21): title:Startup Log
[<D> 0805 12:15:10.353] Main (<8> http-8686-Processor21): UIListComponentBase.broadcast. Calling method:com.sun.faces.el.MethodBindingImpl@8d41f2
[<D> 0805 12:15:10.354] Main (<8> http-8686-Processor21): starting engineId = odlbpm2
[ 0805 12:15:10.354] Main (<9> odlbpm2): (stdout) Message written by the process execution engine: Loading process execution engine properties ....
[ 0805 12:15:11.395] Main (<10> Thread-46): (stderr) Message written by the process execution engine : Directory service: default.
[ 0805 12:15:11.395] Main (<10> Thread-46): (stderr) Message written by the process execution engine : Directory service: default
[ (cont) ] Main: .
[ 0805 12:15:11.597] Main (<10> Thread-46): (stderr) Message written by the process execution engine : Directory service: default
[ (cont) ] Main: Creating connector [fuego:SQL]
[ (cont) ] Main: .
[ 0805 12:15:12.248] Main (<10> Thread-46): (stderr) Message written by the process execution engine : Directory service: default
[ (cont) ] Main: Creating connector [fuego:SQL]
[ (cont) ] Main: Common Preference looknfeel not valid
[ (cont) ] Main: .
[ 0805 12:15:12.383] Main (<10> Thread-46): (stderr) Message written by the process execution engine : Directory service: default
[ (cont) ] Main: Creating connector [fuego:SQL]
[ (cont) ] Main: Common Preference looknfeel not valid
[ (cont) ] Main: SERVER STARTUP aborted. Server not configured or
[ (cont) ] Main: not able to run in host: 'odlbpm2.octanner.com'
[ (cont) ] Main: .
[ 0805 12:15:12.384] Main (<10> Thread-46): (stderr) Message written by the process execution engine : Directory service: default
[ (cont) ] Main: Creating connector [fuego:SQL]
[ (cont) ] Main: Common Preference looknfeel not valid
[ (cont) ] Main: SERVER STARTUP aborted. Server not configured or
[ (cont) ] Main: not able to run in host: 'odlbpm2.octanner.com'
[ (cont) ] Main: ProcessServer not configured to run in local host.
[ (cont) ] Main: .
[ 0805 12:15:13.387] Main (<10> Thread-46): (stderr) Message written by the process execution engine : Directory service: default
[ (cont) ] Main: Creating connector [fuego:SQL]
[ (cont) ] Main: Common Preference looknfeel not valid
[ (cont) ] Main: SERVER STARTUP aborted. Server not configured or
[ (cont) ] Main: not able to run in host: 'odlbpm2.octanner.com'
[ (cont) ] Main: ProcessServer not configured to run in local host.
[ (cont) ] Main: FAILED
[ (cont) ] Main: .
[<D> 0805 12:15:13.388] Main (<8> http-8686-Processor21): Directory service: default
[ (cont) ] Main: Creating connector [fuego:SQL]
[ (cont) ] Main: Common Preference looknfeel not valid
[ (cont) ] Main: SERVER STARTUP aborted. Server not configured or
[ (cont) ] Main: not able to run in host: 'odlbpm2.octanner.com'
[ (cont) ] Main: ProcessServer not configured to run in local host.
[ (cont) ] Main: FAILED
[ (cont) ] Main:
[ (cont) ] Main: java.lang.Exception: Directory service: default
[ (cont) ] Main: Creating connector [fuego:SQL]
[ (cont) ] Main: Common Preference looknfeel not valid
[ (cont) ] Main: SERVER STARTUP aborted. Server not configured or
[ (cont) ] Main: not able to run in host: 'odlbpm2.octanner.com'
[ (cont) ] Main: ProcessServer not configured to run in local host.
[ (cont) ] Main: FAILED
[ (cont) ] Main:
[ (cont) ] Main: at fuego.util.CommandExecutionThread.executeDaemon(CommandExecutionThread.java:170)
[ (cont) ] Main: at fuego.mami.Engine.startLocal(Engine.java:1170)
[ (cont) ] Main: at fuego.mami.Engine.startLocal(Engine.java:1121)
[ (cont) ] Main: at fuego.webconsole.model.JSFEngine.startAction(JSFEngine.java:1572)
[ (cont) ] Main: at fuego.webconsole.model.JSFEngine.startAction(JSFEngine.java:1565)
[ (cont) ] Main: at fuego.webconsole.model.EnginePaginateHandler.startEngines(EnginePaginateHandler.java:318)
[ (cont) ] Main: at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ (cont) ] Main: at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[ (cont) ] Main: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[ (cont) ] Main: at java.lang.reflect.Method.invoke(Method.java:585)
[ (cont) ] Main: at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
[ (cont) ] Main: at fuego.jsfcomponents.ui.UIListComponentBase.broadcast(UIListComponentBase.java:61)
[ (cont) ] Main: at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
[ (cont) ] Main: at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:307)
[ (cont) ] Main: at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79)
[ (cont) ] Main: at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
[ (cont) ] Main: at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
[ (cont) ] Main: at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[ (cont) ] Main: at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
[ (cont) ] Main: at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[ (cont) ] Main: at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
[ (cont) ] Main: at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
[ (cont) ] Main: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
[ (cont) ] Main: at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
[ (cont) ] Main: at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
[ (cont) ] Main: at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
[ (cont) ] Main: at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
[ (cont) ] Main: at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
[ (cont) ] Main: at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
[ (cont) ] Main: at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
[ (cont) ] Main: at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
[ (cont) ] Main: at java.lang.Thread.run(Thread.java:595)
[ (cont) ] Main:
[<D> 0805 12:15:13.390] Main (<8> http-8686-Processor21): UIListComponentBase.broadcast. forward action:
[<D> 0805 12:15:13.393] Main (<8> http-8686-Processor21): JspLocationStatus:fuego.jsfcomponents.ui.JspLocationStatus@3fc47c
[<D> 0805 12:15:13.393] Main (<8> http-8686-Processor21): ---------------------- UILocation ------------------------------------
[<D> 0805 12:15:13.393] Main (<8> http-8686-Processor21): Action:The node already exists->[id:engineListId;jspPath:/webconsole/faces/jsf/engineList.jsp;label:Engines]
[<D> 0805 12:15:13.393] Main (<8> http-8686-Processor21): HelpRenderer.encodeEnd
[<D> 0805 12:15:13.393] Main (<8> http-8686-Processor21): 1. rendered = null
[<D> 0805 12:15:13.393] Main (<8> http-8686-Processor21): 2. renderedObj = true
[<D> 0805 12:15:13.393] Main (<8> http-8686-Processor21): href = http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/admin_guide/index.html?t=modules/proc_adm_ref/c_Engines.html
[<D> 0805 12:15:13.394] Main (<8> http-8686-Processor21): getPresentables >>>>>>>>>
[<D> 0805 12:15:13.394] Main (<8> http-8686-Processor21): engines >>>>>>>>= 2
[<D> 0805 12:15:13.395] Main (<8> http-8686-Processor21): rendered = null
[<W> 0805 12:15:13.396] Main (<8> http-8686-Processor21): Error BPM-1249512562229
[ (cont) ] Main: Cannot start engine. Check the startup and engine logs for more information.
[ (cont) ] Main: fuego.mami.exception.CannotStartEngineException: Cannot start engine. Check the startup and engine logs for more information.
[ (cont) ] Main: at fuego.mami.Engine.startLocal(Engine.java:1190)
[ (cont) ] Main: at fuego.mami.Engine.startLocal(Engine.java:1121)
[ (cont) ] Main: at fuego.webconsole.model.JSFEngine.startAction(JSFEngine.java:1572)
[ (cont) ] Main: at fuego.webconsole.model.JSFEngine.startAction(JSFEngine.java:1565)
[ (cont) ] Main: at fuego.webconsole.model.EnginePaginateHandler.startEngines(EnginePaginateHandler.java:318)
[ (cont) ] Main: at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ (cont) ] Main: at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[ (cont) ] Main: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[ (cont) ] Main: at java.lang.reflect.Method.invoke(Method.java:585)
[ (cont) ] Main: at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
[ (cont) ] Main: at fuego.jsfcomponents.ui.UIListComponentBase.broadcast(UIListComponentBase.java:61)
[ (cont) ] Main: at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
[ (cont) ] Main: at javax.faces.component.UIViewRoot.processDecodes(UIViewRoot.java:307)
[ (cont) ] Main: at com.sun.faces.lifecycle.ApplyRequestValuesPhase.execute(ApplyRequestValuesPhase.java:79)
[ (cont) ] Main: at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
[ (cont) ] Main: at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
[ (cont) ] Main: at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[ (cont) ] Main: at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
[ (cont) ] Main: at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
[ (cont) ] Main: at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
[ (cont) ] Main: at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
[ (cont) ] Main: at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
[ (cont) ] Main: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
[ (cont) ] Main: at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
[ (cont) ] Main: at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
[ (cont) ] Main: at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
[ (cont) ] Main: at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
[ (cont) ] Main: at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
[ (cont) ] Main: at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
[ (cont) ] Main: at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
[ (cont) ] Main: at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
[ (cont) ] Main: at java.lang.Thread.run(Thread.java:595)
[ (cont) ] Main:

Hi,
I am sure you might have followed these steps. However, Could you please verify whether you had migrated the code by following the steps as mentioned in the docs posted below:
http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/upgradeguide/index.html
It seems like the properties are causing some issues. the properties files have been upgraded from .properties to .xml files in OBPM.
Hope this helps
Rudraksh

Intel Trusted Execution Engine Interface has a Code 10 error.

When I open Device Manager I get a yellow triangle on the Intel Trusted Execution Engine Interface. I open it and it says
This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE. I have tried uninstalling it and updated all drivers. I don't know what else to do so it will be awesome if anyone can help me out here.

You're very welcome.
OK...
Let's try manually installing the driver.
First, go to the Intel TXE driver folder you unzipped and open that folder.
Inside that folder there is another zipped driver folder (KMDF whatever). Unzip that one. Let it extract inside the other folder.
Go to the device manager and click on the problem TXE device.
Then click on the driver tab.
Click on Update Driver.
Select the browse my computer for driver software option and then at the bottom of that window, select the Let me pick from a list of device drivers on my computer.
Select Have Disk and browse to: unzipped Intel TXE driver folder\unzipped inner folder\KMDF_NO_RTD3_DRIVER\KMDF_NO_RTD3_DRIVER\NO_RTD3_DRIVER\release\x64\TXEI, and select the Intel(R) Trusted Execution Engine Interface device from the list and see if the driver installs that way.

Post JVM Execution removal of java.exe

I need to implement a way to delete java.exe (and accopanying files) from a process that uses the same java.exe.
So, a launcher copies a JVM and some other stuff to a temp directory to execute the java program. From inside the java program, the user can click exit. After the programs exits, ideally a process is alive to delete the java.exe that was used, plus other temporary files.
I've been trying to work out clever ways to use Thread.sleep, wait(), or javax.swing.Timer but nothing seems all that clean. What is the best way for me to go about doing this?

The biggest problem presented is the CD swapping. This eliminates being able to count on the CD as a reliable place to put any .bat or .exe files.
Similarly with the launcher. Once the CD is changed, the launcher is no longer present anywhere in the equation. This kills the hope to have the launcher wait for the process to end before doing any clean up. However there is still the possibility to open a process in memory that will listen for the application to complete. The launcher is C++, and I'm not to familiar with that.
Also, just because the installation app is run, does not mean that our core software is put on the box. The user could just as easily open the "Launchpad" and close it without doing anything. We cant assume a java.exe will be present.

Satellite P100: Fatal Execution Engine Error code Ox7927e03e

The above error message (code Ox7927e03e) appears every time I restart my Satellite P100.
Various suggestions on the Microsoft XP website to update/repair Net.Framework don't work.
Any ideas? The computer works normally except for Media Centre which generates the same message.

You could firstly use the Windows own system restore tool. This tool will turn back the OS to the early point. If it does not work you could use the Toshiba recovery CD. On this CD everything was preinstalled and this installation will set the notebook back to the factory settings

Cannot load script for execution.

hi
iam creating the sisi package with in script task . script task was build successful . but when i was executive the ssis packages vs 2012.
it get error :Cannot load script for execution..
the code is
Microsoft SQL Server Integration Services Script Task
Write scripts using Microsoft Visual C# 2008.
The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
using System.IO;
namespace ST_8cdbf584a74b48abb384d8f03cf42f4d.csproj
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
The execution engine calls this method when the task executes.
To access the object model, use the Dts property. Connections, variables, events,
and logging features are available as members of the Dts property as shown in the following examples.
To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
To post a log entry, call Dts.Log("This is my log text", 999, null);
To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
To use the connections collection use something like the following:
ConnectionManager cm = Dts.Connections.Add("OLEDB");
cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
To open Help, press F1.
public void Main()
byte[] dataByte = null; String errInfo = "";
try
String sDirectory = Dts.Variables["User::Directory"].Value.ToString();
String CreatePartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
String ProcessPartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
// Create XMLA Script
Dts.Variables["User::CreatePartitions"].Value = ReadFile(CreatePartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
//Process XMLA Script
Dts.Variables["User::ProcessPartitions"].Value = ReadFile(ProcessPartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
Dts.TaskResult = (int)ScriptResults.Success;
catch (Exception ex)
Dts.Log("Error Message: " + ex.Message, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
public String ReadFile(String FilePath, String ErrInfo)
String strContents;
StreamReader sReader;
try
sReader = File.OpenText(FilePath);
strContents = sReader.ReadToEnd();
sReader.Close();
return strContents;
catch (Exception e)
MessageBox.Show(ErrInfo);
ErrInfo = e.Message;
return "";
how to solve this issue
pleasse help me..

Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Possible to spin off independant JVM?

I have a program (MyProgram) that displays a bunch of buttons that are associated with other Java programs. When a button is pressed, the classes needed to run that application are loaded (using URLClassLoader) and an invoke() is called on the main class of that application. This executes the selected application on the same JVM that MyProgram is running on.
Same-JVM execution is like one huge memory "leak": when one program on the JVM quits, not all of it's resources are reclaimed.
One proposed solution to this problem was to have MyProgram create a new JVM (different from the one it's running on) for the programs it launches to run on. Every 3rd program it would release the previous JVM (leaving it to run on it's own) and create a new one to run the next 3 launched programs on.
Is this possible? (If I'm not making sense, please let me know). Is there a better way to accomplish this task?

Do you want to run in one VM or not?I want to do exactly what I said in my post.
Originally we wanted everything running on one. Now,
faced with memory problems, we're looking into running
only 3-4 apps on one VM. The memory savings are
reduced, but the potential for leakage is reduced,
too.I have to apologize. Rereading your original post I realize that I kind of skimmed right over the third paragraph.
No matter how
you start another VM you will not save any memory.Running one VM for multiple apps will save memory, and
tests have borne this out: each VM requires an
incredible amount of overhead to run, so if you can
get more than one app onto a VM you've saved the
memory that would have been used to run the VM for
each app.Actually, this goes to the same careless reading. I thought you were imagining that starting one VM from another somehow consumed less resources than starting it from a shell. Guess I was tired.
In the world of Smalltalk that I come from, we did everything on a given machine in one VM, unless we were working on distributed aspects of our apps and we didn't want to use several machines. Every app was developed with that taken for granted, so we never had problems with apps conflicting. schapel's point was pretty good, and not something that would have occurred to me.
Your problems with
unreleased resources are very likely problems with
your own code, as Sun has fixed most of theresource
leaks in Swing.Actually, Sun informs us that they're working on the
same problem we are.Do you have even a rough idea where it is? I'd love to know to avoid it. But I guess if you knew you'd be avoiding it too - as it'd probably be less work than the pain you're going through now!
I recommend that you check out
http://www.ddj.com/documents/s=888/ddj0002l/0002l.htm
Will do!Good luck,
Ian

Unable to deploy ALBPM Engine EAR

Hello,
We were using ALBPM Version: 6.0.3 build 86775; after upgrading to Version: 6.0.4 build 92179 added an engine with all the required configuration (in process administrator) and created the engine EAR. But I am unable to install the engine EAR to the WebLogic Server. The installation goes on (the progress bar in process administrator continues to move). In the WLS console the status of the engine EAR appears as "Running Deployment" And in the server log the following <Error> message keeps appearing every 10 mins:
<Oct 23, 2008 4:05:30 PM EDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "639" seconds working on the request "Http Request: /fuego/deployer/servlet/worker", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-14 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, sleeping, priority=1, DAEMON> {
java.lang.Thread.sleep(Thread.java:???)
fuego.j2eedeployer.weblogic.WLDeployerExecutor.installApplication(WLDeployerExecutor.java:81)
fuego.j2eedeployer.weblogic.WLDeployer.installEar(WLDeployer.java:145)
fuego.j2eedeployer.weblogic.WLDeployer.installEngine(WLDeployer.java:97)
fuego.j2eedeployer.basedeployer.BaseDeployerServlet.doPost(BaseDeployerServlet.java:73)
javax.servlet.http.HttpServlet.service(HttpServlet.java:736)
javax.servlet.http.HttpServlet.service(HttpServlet.java:851)
weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:224)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:308)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:117)
weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:108)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:198)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3214)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:308)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:117)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1946)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1868)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1331)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:206)
weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
After some more time the Deploy fails with the following exception in the WLS log:
<Oct 23, 2008 4:25:27 PM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application '01-eng-albpmengine'.>
<Oct 23, 2008 4:25:27 PM EDT> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: [HTTP:101216]Servlet: "engineStartup" failed to preload on startup in Web application: "/albpmServices/albpmengine".
fuego.server.exception.EngineRuntimeException: Server runtime exception. Process execution engine execution error.
 at fuego.ejbengine.service.EJBParticipantService.initializeImpl(EJBParticipantService.java:48)
 at fuego.ejbengine.cluster.DistributedEJBParticipantService.initialize(DistributedEJBParticipantService.java:27)
 at fuego.ejbengine.cluster.ClusterObjectFactory.initializeParticipantService(ClusterObjectFactory.java:58)
 at fuego.ejbengine.Engine.startServices(Engine.java:435)
 at fuego.ejbengine.Engine.start(Engine.java:132)
Environment: OS: Win NT Server 2003 Standard Edn
Database: Oracle 10g (10.2.0.3)
Product Name: ALBPM
Version: 6.0.4 build 92179

Hi,
I'm still using 6.03 release but I did have a lot of problems initially with cross platform version compatibility. You might need to check the Release notes for the R4 release to see if it is still compatible with the release of WebLogic you are using.
TP

Migration Oracle BPM Engine

Hi everyone,
I am trying to migrate an existing Oracle BPM Enterprise instance installation (Service Directory and Process Execution Engine) to another physical machine (including its databases). I have already installed all system requeriments and I have created the Weblogic domain required, but when I try to configure the new instance, I do not clear about the how to restore de service directory and engine, because internally the service directory database saved local references to the engine and the current local machine. In addition, how must be migrate the engine to restore all instaces and relationships with the participants?
Anyone knows how do that or knows about a guide for this procedure.
Thanks in advance for your comments or any guide to me.
César

Have a look at this post. Oracle BPM 11g: Instance migration with the ant Script

Incomplete Client Install OSD - Failed to create instance if Software Execution Request Managerr. 0x80070005

I am using an imaging task sequence and getting a
0x80070005 error. IT seems that the SCCM client
doesn’t complete correctly and actions are missing from the client.
Below is the log information. I am not sure if a reboot is causing the issue?
<![LOG[Path variable _SMSTSBootStagePath converted from C:\_SMSTaskSequence\WinPE to F05092C70000100000000000:\_SMSTaskSequence\WinPE]LOG]!><time="09:40:56.205+300" date="04-07-2014" component="TSManager" context=""
type="1" thread="2244" file="resolvesource.cpp:1597">
<![LOG[Updated security on object C:\_SMSTaskSequence.]LOG]!><time="09:40:56.237+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244" file="utils.cpp:1704">
<![LOG[Set a global environment variable _SMSTSNextInstructionPointer=12]LOG]!><time="09:40:56.237+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSNextInstructionPointer=12]LOG]!><time="09:40:56.237+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244"
file="executionenv.cxx:386">
<![LOG[Set a global environment variable _SMSTSInstructionStackString=8]LOG]!><time="09:40:56.237+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="executionenv.cxx:668">
<![LOG[Set a TS execution environment variable _SMSTSInstructionStackString=8]LOG]!><time="09:40:56.237+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="executionenv.cxx:414">
<![LOG[Save the current environment block]LOG]!><time="09:40:56.237+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="executionenv.cxx:833">
<![LOG[Expand a string: %_SMSTSMDataPath%\Logs]LOG]!><time="09:40:56.268+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="executionenv.cxx:782">
<![LOG[_SMSTSReturnToGINA variable set to true]LOG]!><time="09:41:56.381+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244" file="engine.cxx:936">
<![LOG[Skipped Reboot System]LOG]!><time="09:41:56.381+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244" file="engine.cxx:940">
<![LOG[The action (Restart Computer) initiated a reboot request]LOG]!><time="09:41:56.381+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244" file="engine.cxx:277">
<![LOG[MP server http://XXXXXXXXXXX. Ports 80,443. CRL=false.]LOG]!><time="09:41:56.381+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244"
file="utils.cpp:5881">
<![LOG[Setting authenticator]LOG]!><time="09:41:56.396+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244" file="utils.cpp:5903">
<![LOG[Set authenticator in transport]LOG]!><time="09:41:56.396+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="libsmsmessaging.cpp:7734">
<![LOG[Sending StatusMessage]LOG]!><time="09:41:56.428+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="09:41:56.443+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="09:41:56.443+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXXX:80 CCM_POST /ccm_system/request]LOG]!><time="09:41:56.443+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244"
file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="09:41:56.474+300" date="04-07-2014" component="TSManager" context="" type="0" thread="2244" file="libsmsmessaging.cpp:8939">
<![LOG[****************************************************************************]LOG]!><time="09:41:56.490+300" date="04-07-2014" component="TSManager" context="" type="1" thread="2244"
file="tsmanager.cpp:925">
<![LOG[Execution engine result code: Reboot (2)]LOG]!><time="09:41:56.490+300" date="04-07-2014" component="TSManager" context="" type="2" thread="2244" file="tsmanager.cpp:931">
<![LOG[Process completed with exit code 2147945410]LOG]!><time="09:41:56.521+300" date="04-07-2014" component="TSMBootstrap" context="" type="1" thread="2352" file="commandline.cpp:1123">
<![LOG[Exiting with return code 0x80070BC2]LOG]!><time="09:41:56.521+300" date="04-07-2014" component="TSMBootstrap" context="" type="1" thread="2352" file="tsmbootstrap.cpp:1238">
<![LOG[Process completed with exit code 2147945410]LOG]!><time="09:41:56.537+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="2144" file="commandline.cpp:1123">
<![LOG[Task sequence requested a reboot]LOG]!><time="09:41:56.537+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="2144" file="basesetuphook.cpp:1580">
<![LOG[Terminating system message loop.]LOG]!><time="09:41:56.553+300" date="04-07-2014" component="OSDSetupHook" context="" type="0" thread="2168" file="debugwindow.cpp:222">
<![LOG[Restoring original desktop wallpaper.]LOG]!><time="09:41:56.568+300" date="04-07-2014" component="OSDSetupHook" context="" type="0" thread="2144" file="wallpaperselector.cpp:139">
<![LOG[::SystemParametersInfoW( 0x0014, 0, (LPVOID)m_sOriginalWallpaper.c_str(), 0x0002 | 0x0001 ), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\osdgina\wallpaperselector.cpp,162)]LOG]!><time="09:41:56.568+300" date="04-07-2014"
component="OSDSetupHook" context="" type="0" thread="2144" file="wallpaperselector.cpp:162">
<![LOG[Failed to set log directory. Some execution history may be lost.
The system cannot find the file specified. (Error: 80070002; Source: Windows)]LOG]!><time="09:43:40.359+300" date="04-07-2014" component="OSDSetupHook" context="" type="3" thread="840" file="osdsetuphook.cpp:192">
<![LOG[Executing task sequence]LOG]!><time="09:43:40.375+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="osdsetuphook.cpp:279">
<![LOG[Task Sequence environment not found.]LOG]!><time="09:43:40.390+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:1450">
<![LOG[Attempting to get active request.]LOG]!><time="09:43:40.390+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:48">
<![LOG[Failed to create instance if Software Execution Request Managerr. 0x80070005]LOG]!><time="09:43:40.437+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840"
file="basesetuphook.cpp:57">
<![LOG[Waiting for ccmexec process to start.]LOG]!><time="09:43:40.437+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:58">
<![LOG[Failed to create instance if Software Execution Request Managerr. 0x80070005]LOG]!><time="09:43:46.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840"
file="basesetuphook.cpp:57">
<![LOG[Waiting for ccmexec process to start.]LOG]!><time="09:43:46.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:58">
<![LOG[Failed to create instance if Software Execution Request Managerr. 0x80070005]LOG]!><time="09:43:51.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840"
file="basesetuphook.cpp:57">
<![LOG[Waiting for ccmexec process to start.]LOG]!><time="09:43:51.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:58">
<![LOG[Failed to create instance if Software Execution Request Managerr. 0x80070005]LOG]!><time="09:43:56.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840"
file="basesetuphook.cpp:57">
<![LOG[Waiting for ccmexec process to start.]LOG]!><time="09:43:56.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:58">
<![LOG[Failed to create instance if Software Execution Request Managerr. 0x80070005]LOG]!><time="09:44:01.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840"
file="basesetuphook.cpp:57">
<![LOG[Waiting for ccmexec process to start.]LOG]!><time="09:44:01.257+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:58">
<![LOG[GetActiveRequest failed with error code 0x87d01012]LOG]!><time="09:44:07.804+300" date="04-07-2014" component="OSDSetupHook" context="" type="3" thread="840" file="basesetuphook.cpp:66">
<![LOG[GetActiveRequest failed. 0x87D01012.]LOG]!><time="09:44:07.804+300" date="04-07-2014" component="OSDSetupHook" context="" type="3" thread="840" file="basesetuphook.cpp:83">
<![LOG[ReleaseActiveRequest failed. 0x87d01012.]LOG]!><time="09:44:07.804+300" date="04-07-2014" component="OSDSetupHook" context="" type="3" thread="840" file="basesetuphook.cpp:122">
<![LOG[Deleting SMS_MaintenanceTaskRequests istance: SMS_MaintenanceTaskRequests.TaskID="{11EB4952-7CDD-45D5-BD6F-DA65E193E04F}".]LOG]!><time="09:44:07.835+300" date="04-07-2014" component="OSDSetupHook"
context="" type="1" thread="840" file="basesetuphook.cpp:144">
<![LOG[Removed 1 instance of SMS_MaintenanceTaskRequests for tasksequence.]LOG]!><time="09:44:07.835+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:155">
<![LOG[Uninstalling Setup Hook]LOG]!><time="09:44:07.835+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:1628">
<![LOG[Removing setup hook from registry.]LOG]!><time="09:44:07.835+300" date="04-07-2014" component="OSDSetupHook" context="" type="0" thread="840" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="09:44:07.835+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:1321">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="09:44:07.835+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:1321">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="09:44:07.835+300" date="04-07-2014" component="OSDSetupHook" context="" type="1" thread="840" file="basesetuphook.cpp:1358">

You are starting the OSD from Full OS? Is there Bitlocker enabled on the machine you're trying to re-install? Could you post a screenshot of your Task Sequence?

Regarding Engine Run state using PAPI Client

Is there anyway to find if ALBPM Execution engine is running using PAPI Client?
Thank you.
Regards,
Ravi.

Hi,
IMHO the best way to find if the engine is up or down is by connecting through JMX,
Hope this helps,
Ariel

JVM execution engine

Similar Messages

Maybe you are looking for