JWS to browser communication?

Can I exchange information between JavaScript and a JWS application lauched from the same browser session? Scenario would be as follows:
1) Enter URL of web page from browse.
2) Web page displays in browser with a button which will lauch a JWS application. Would like to pass parameter data to JWS application when lauched.
3) Upon existing JWS application, any return values are passed back to browser (hoping JavaScript could read return values).
4) Display return values within browser page (same page if possible).
Please let me know if this is possible or at least some variation (JSP, servlets, etc). Also, please don't ask me about using applets. Just assume I can't use them.
Thanks for any help,
SLS

since javaws is launched as a helper application, this is not possible.
when javaws is invoked it has no knowledge of the browser that invoked it (if one did).
/Dietz

Similar Messages

Inexplicable delays in browser-to-servlet-to-browser communication

We are seeing some inexplicable "pauses" in the round-trip from
browser-to-servlet-to-browser communication. The browser and Weblogic
instance are on different machines, so correlating absolute times has
been difficult. So at this point it's hard to tell whether the browser
request is not being received immediately by the servlet, or the servlet
response is not being received immediately by the browser... or perhaps
it is, but maybe the response stream isn't "closing" properly, causing
the browser to think there's still more to come.
If the browser request is not being received immediately by the servlet,
it could be because the execute thread count is so low that the request
is being blocked until a thread is availble to service it. But our
thread count is set to 30 and this is with just a single user hitting
the servlet.
If the servlet response is not being received immediately by the
browser, or is not being closed properly, what could cause that?
Occassionally, I have been able to account for some of the "delay"
time. Our servlet does the usual stuff: writes out to the response
writer and then closes the writer:
PrintWriter writer = response.getWriter();
writer.write( htmlString );
writer.close();
I have seen the writer.close() method taking a long time - over 5
seconds on one occassion! What could it be doing?
Could some type of TCP_NO_DELAY network setting account for all of
this? Any and all help/experiences are appreciated.
mg
Mike Gorman, Director of Architecture
YOUcentric, Inc.
Charlotte, NC
704-643-1000 x518
http://www.youcentric.com

If you are using 5.1 and you have ELF turned on (see docs).
You can specify "time" as an ELF header and this gives you the time of
processing and the write.
mbg
In article <[email protected]>, [email protected] says...
Here are a few top of the head suggestions:
1. You can log the time when the request is received by the servlet and
when the output stream is closed. That should give you a fair idea of
what percentage of delay happens on the servlet side.
2. Try flush() to send stuff to the browser after every few lines of
write(). It helps.
3. IE does wait for the whole HTML to come in before it displays unlike
Netscape which shows the streaming data. So switch browser and check.
4. Make sure you are not using the SingleThread model even though that
does not explain the delay encountered by a single user.
If these do not help, you would need to give more insight into the code.
- Anshum
Mike Gorman wrote:
We are seeing some inexplicable "pauses" in the round-trip from
browser-to-servlet-to-browser communication. The browser and Weblogic
instance are on different machines, so correlating absolute times has
been difficult. So at this point it's hard to tell whether the browser
request is not being received immediately by the servlet, or the servlet
response is not being received immediately by the browser... or perhaps
it is, but maybe the response stream isn't "closing" properly, causing
the browser to think there's still more to come.
If the browser request is not being received immediately by the servlet,
it could be because the execute thread count is so low that the request
is being blocked until a thread is availble to service it. But our
thread count is set to 30 and this is with just a single user hitting
the servlet.
If the servlet response is not being received immediately by the
browser, or is not being closed properly, what could cause that?
Occassionally, I have been able to account for some of the "delay"
time. Our servlet does the usual stuff: writes out to the response
writer and then closes the writer:
PrintWriter writer = response.getWriter();
writer.write( htmlString );
writer.close();
I have seen the writer.close() method taking a long time - over 5
seconds on one occassion! What could it be doing?
==================================================
NewsGroup Rant
==================================================
Rant 1.
The less info you provide about your problem means
the less we can help you. Try to look at the
problem from an external perspective and provide
all the data necessary to put your problem in
perspective.

HotSpot JVM error running JWS Test Browser

While when running the JWS Test Browser I get the attached JVM exception. It's
intermittent. When it happens, I’m stuck. I have to remove my WebService and rebuild
it to get past the problem.
OS - XP SP1
WL 8.1 SP2
JVM – java version "1.4.1_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_05-b01)
Java HotSpot(TM) Client VM (build 1.4.1_05-b01, mixed mode)
[jvm_errror.txt]

Michael -
JDK 1.4.1_05 has TONS of bugs. I would strongly recommend upgrading to JDK
1.4.2 early in your project, to save you a lot of potential problems.
Kunal
"Michael Moran" <[email protected]> wrote in message
news:40c0b1f7$1@mktnews1...
Okay, it appears I don't have to rebuild the WebService, I can alsoshutdown
Workshop and recompile before starting the server and it fixes the problem
most of the time. However, I have to try a few times before it works.
Any ideas?
"Michael Moran" <[email protected]> wrote in message
news:40c0a614$1@mktnews1...
While when running the JWS Test Browser I get the attached JVM
exception.
It's
intermittent. When it happens, I'm stuck. I have to remove my WebServiceand rebuild
it to get past the problem.
OS - XP SP1
WL 8.1 SP2
JVM - java version "1.4.1_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_05-b01)
Java HotSpot(TM) Client VM (build 1.4.1_05-b01, mixed mode)

MacBook Pro Safari Browser Community Toolbar Problem

Everytime I open Safari on my MacBook Pro the following message appears:
'We’re sorry, but the Safari browser version you are currently using does not support the community toolbar.'
I have to acknowledge it before I can go online, very annoying!!
Any fixes for this would be appreciated

Follow the paths...
/Library/Application Support/ Move the Conduit file to the Trash.
/Library/Application Support/ Move all of these files to the Trash: SIMBL/Plugins/CT2285220.bundle
/Library/InputManagers/ Move CTLoader to the Trash.
/Library/ScriptingAdditions/ Move any Conduit / CTLoader related files in that folder to the Trash.
/Users/<User name>/Library/Application Support/ Move Conduit to the Trash.
Restart your Mac, empty the Trash, try Safari.

Unattended Browser Communicating More than Expected

FireFox 23.0 is communicating over the Internet while my computer is unattended and the browser is open to just one ordinary Web site (a single satellite image from http://www.ssec.wisc.edu). The following data come from the LAN Connection Status on my XP SP3 computer with the assumption that one "packet" = 1500 bytes:
Overall data rates are about 3.23 MB/hr up and 4.58 MB/hr down (averaged over 2 hr 17 min) with Firefox open. With Firefox closed I'm showing only about 0.12 MB/hr up and 0.050 MB/hr down (averaged over 4 hr 22 min), which I presume can be attributed to Windows.
Question: Is this level of "chatter" reasonable, given FireFox's desire to update itself, it's databases, and its plugins (I have read https://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections?esab=a&s=automatic+reload&r=3&as=s; no live bookmarks, newsfeeds, etc. are set up), or is this in itself a cause for concern? I have no other obvious symptoms of infection. The above data result solely from my own curiosity about how much bandwidth I was using.

OK, Thanks. I have a log. Now I just have to learn how to read and make sense out of it! Any suggested references? --JCW2

Flash Player and Browser Communication

According to this article:
http://blog.dannypatterson.com/?p=133
Compressed data (gzip files) being sent from the server are
unzipped by the browser before being passed to Flash Player -
therefore there is no need to write separate action script classes
to deal with the data.
I am getting conflicting reports from other developers saying
that the Flash player communicates directly with data coming from
the server with no stop at the browser level. According to them,
you must write actionscript classes to decompress the data.
Who is right?

If you want to report Flash Player bug, right location is here. If you report ActionScrit bug, JIRA is right place though.
By the way I belive this is not bug but expected behavior. I'll follow up more info in Flash Player forum: http://forums.adobe.com/thread/920682?tstart=0
thanks,
Hitomi

Applet-Browser communication

I have an applet that runs inside one frame of a two frame browser window. As far as I can tell from the JDK documentation, the only way an applet can interact with the browser is the requests for displaying particular pages e.g.using the showDocument() method in the AppletContext interface class.
What I want to be able to do is to highlight particular text in the browser frame from the applet. Is this possible? Does anyone know of anyone free libraries that have implemented such functionality?
Any ideas appreciated.

I don't think that's possible.
but if the HTML-pages are simple (no scripting, no frames etc..) you
can use JEditorPane to show the HTML-pages instead of the browser and you have all the control you wish.

Java and native browser communication

Hello all,
I am working on a project that parses an HTML document and retrieves specified data. This module of the app is complete. The app can easily read a URL specified by the user, but the contents of some URLs will of course be different when viewed through a browser due to cookies etc.
Thus, I am trying to access the same HTML doc that a native browser is displaying (ie the same data that is shown upon "view source"). Does anyone know of a way to do this? Thanks in advance!
derek

DrClap wrote:
derekn wrote:
Thanks Chuck!
I presently have a similar implementation which reads the HTML at a URL just fine. However, I essentially want to synchronize my app with the actual HTML that is displayed in a native browser. The reasoning behind this is that the browser will of course do redirects, automatic logins etc. at certain URLs due to cookies and such. It is impractical to attempt to mimick these actions in my app and hope to get the same HTML that the native browser is displaying, so instead I am trying to access the same data. Any thoughts?Okay. So you know what has to be done. If your question is then how to hack into the browser instead, and get it to disgorge its data, good luck to you. It isn't really impractical to handle cookies and redirects and basic authentication logins, though.After researching, I think the best thing to do will be to just embed a fully functional browser in my app using JDIC or a similar technology. Microsoft and Mozilla provide embeddable versions of their browsers. Because you're right, I would essentially have to hack a browser to access that data.

2 different JWS app's communication, it's possible?

Hello friends
I need a way to communicate a Java application launched by JWS, and another different Java application launched by JWS, in the same computer.
It's possible to do this??? Some efficient sample???
Thanks a lot!!

JosBravo wrote: I need a way to communicate a Java application launched by JWS, and another different Java application launched by JWS, in the same computer.
It's possible to do this???
If the question is that important to you that it needs 3 question marks, maybe you should offer some Dukes, which is a better way to show your interest.
But yes, there are a number of ways. Some might be done in sandboxed apps. using the help of an active server (the codebase of the app.).
Here is a different way using sockets, that does not need an active server.
<http://www.physci.org/jws/#kk>
JosBravo wrote: ..Some efficient sample???
What is an 'inefficient sample'? Large download? Obfuscated code? Bad design?

Did you know about Flash Cookies?

I know about regular cookies, and delete them... but had no idea there was such a thing as a Flash Cookie
Read about 1/2 way down here http://windowssecrets.com/comp/100805

Rod,
Since you're a confessed geek with some actual coding chops, I'm sure you'll understand the hair I'm about to split here. Hang on a moment while I grab my axe...
Even with your page jumps, the cookie isn't doing anything. It's just a text file named after a snack. What's causing your page to jump, browsers to redirect, and the moon to shift its gravitational field three degrees to the north is the code in the web page that's being loaded. True, it may look in the text file to see what IP address to report to, but the connection, handshaking, transfer of data and powering up of lasers are all on your web page (or the server side code being executed on its behalf). The cookie is little more than a poorly dressed informant hanging out on the street corner waiting to pass along tidbits of information when the right person asks. Doesn't exactly make it a savory character (name notwithstanding), but it's a harmless one nonetheless. If it's evil you seek, you'll find it in the web site, not the cookie. And that's why I never understood the religious fervor against cookies.
Now, if you want a truly dangerous leave behind, at least on Windows, ActiveX controls are your guys. They're really just glorified COM objects, and thus have complete access to the entire Windows API. Give me permission to install an ActiveX control on your machine and I can rewrite your file system, start and stop services, reboot your computer, or just turn the screen a hyperintelligent shade of the color blue because it amuses me. Anything that can be done in Windows programming is essentially available to the ActiveX control.
Of course, browsers got hip to this years ago, and now the default security settings for ActiveX are to not install automatically, or at least to query the user first. Or, as it's configured on my machine, feel free to install if you can make it past this shotgun pointed at your head. Maybe that's why there's not as much of a flap about ActiveX as there is about cookies. Because they're truly dangerous, the browser community took it seriously.and now only someone with a death wish allows a web page to install an ActiveX component.
And overall, this is kinda my point. The much maligned cookie gets a bad rap while in truth it's the web page staring you right in the face that's preparing to rob, rape and pillage. But then, misdirection has always been a classic tactic in warfare.

Ffplay doesn't play video after using chromium

Primarily my VLC stops playing movies after a while of using PC (and I think it stops working after first youtube video in chrome... I have chromium with gtalk and google talk plugin, stackoverflow.com and youtube opened... and the only one that seems to me to be related to video is youtube).
This is what I get trying to use ffplay:
[vyktor@machine ~]$ ffplay file.mp4 -loglevel debug
ffplay version 2.5 Copyright (c) 2003-2014 the FFmpeg developers
built on Dec 4 2014 21:09:42 with gcc 4.9.2 (GCC)
configuration: --prefix=/usr --disable-debug --disable-static --disable-stripping --enable-avisynth --enable-avresample --enable-fontconfig --enable-gnutls --enable-gpl --enable-libass --enable-libbluray --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopencore_amrnb --enable-libopencore_amrwb --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libv4l2 --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265 --enable-libxvid --enable-runtime-cpudetect --enable-shared --enable-swresample --enable-vdpau --enable-version3 --enable-x11grab
libavutil 54. 15.100 / 54. 15.100
libavcodec 56. 13.100 / 56. 13.100
libavformat 56. 15.102 / 56. 15.102
libavdevice 56. 3.100 / 56. 3.100
libavfilter 5. 2.103 / 5. 2.103
libavresample 2. 1. 0 / 2. 1. 0
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 1.100 / 1. 1.100
libpostproc 53. 3.100 / 53. 3.100
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x7f05e8000920] Format mov,mp4,m4a,3gp,3g2,mj2 probed with size=2048 and score=100
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x7f05e8000920] ISO: File Type Major Brand: isom
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x7f05e8000920] Before avformat_find_stream_info() pos: 599402532 bytes read:2866001 seeks:1
[h264 @ 0x7f05e80022e0] no picture
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x7f05e8000920] All info found
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x7f05e8000920] After avformat_find_stream_info() pos: 2852731 bytes read:2898769 seeks:2 frames:13
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'file.mp4':
Metadata:
major_brand : isom
minor_version : 1
compatible_brands: isomavc1
creation_time : 2014-10-06 03:51:25
Duration: 01:37:26.93, start: 0.000000, bitrate: 820 kb/s
Stream #0:0(und), 12, 1/24000: Video: h264 (High) (avc1 / 0x31637661), yuv420p(tv, bt709/unknown/unknown, left), 720x404 (720x416) [SAR 1:1 DAR 180:101], 1001/48000, 694 kb/s, 23.98 fps, 23.98 tbr, 24k tbn, 47.95 tbc (default)
Metadata:
creation_time : 2014-10-06 03:51:25
Stream #0:1(und), 1, 1/48000: Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 121 kb/s (default)
Metadata:
creation_time : 2014-10-06 03:51:30
handler_name : GPAC ISO Audio Handler
detected 2 logical cores
[ffplay_abuffer @ 0x7f05e8288d20] Setting 'sample_rate' to value '48000'
[ffplay_abuffer @ 0x7f05e8288d20] Setting 'sample_fmt' to value 'fltp'
[ffplay_abuffer @ 0x7f05e8288d20] Setting 'channels' to value '2'
[ffplay_abuffer @ 0x7f05e8288d20] Setting 'time_base' to value '1/48000'
[ffplay_abuffer @ 0x7f05e8288d20] Setting 'channel_layout' to value '0x3'
[ffplay_abuffer @ 0x7f05e8288d20] tb:1/48000 samplefmt:fltp samplerate:48000 chlayout:0x3
[ffplay_abuffersink @ 0x7f05e8289b60] auto-inserting filter 'auto-inserted resampler 0' between the filter 'ffplay_abuffer' and the filter 'ffplay_abuffersink'
[AVFilterGraph @ 0x7f05e8009200] query_formats: 2 queried, 0 merged, 3 already done, 0 delayed
[auto-inserted resampler 0 @ 0x7f05e828ab80] ch:2 chl:stereo fmt:fltp r:48000Hz -> ch:2 chl:stereo fmt:s16 r:48000Hz
Audio frame changed from rate:48000 ch:2 fmt:fltp layout:stereo serial:-1 to rate:48000 ch:2 fmt:fltp layout:stereo serial:1
[ffplay_abuffer @ 0x7f05dc005240] Setting 'sample_rate' to value '48000'
[ffplay_abuffer @ 0x7f05dc005240] Setting 'sample_fmt' to value 'fltp'
[ffplay_abuffer @ 0x7f05dc005240] Setting 'channels' to value '2'
[ffplay_abuffer @ 0x7f05dc005240] Setting 'time_base' to value '1/48000'
[ffplay_abuffer @ 0x7f05dc005240] Setting 'channel_layout' to value '0x3'
[ffplay_abuffer @ 0x7f05dc005240] tb:1/48000 samplefmt:fltp samplerate:48000 chlayout:0x3
[ffplay_abuffersink @ 0x7f05dc0063c0] auto-inserting filter 'auto-inserted resampler 0' between the filter 'ffplay_abuffer' and the filter 'ffplay_abuffersink'
[AVFilterGraph @ 0x7f05dc004f40] query_formats: 2 queried, 0 merged, 3 already done, 0 delayed
[auto-inserted resampler 0 @ 0x7f05dc0076e0] ch:2 chl:stereo fmt:fltp r:48000Hz -> ch:2 chl:stereo fmt:s16 r:48000Hz
[h264 @ 0x7f05e828f4e0] no picture
[h264 @ 0x7f05e8296680] no picture
Video frame changed from size:0x0 format:none serial:-1 to size:720x404 format:yuv420p serial:1
[ffplay_buffer @ 0x7f05d406c160] Setting 'video_size' to value '720x404'
[ffplay_buffer @ 0x7f05d406c160] Setting 'pix_fmt' to value '0'
[ffplay_buffer @ 0x7f05d406c160] Setting 'time_base' to value '1/24000'
[ffplay_buffer @ 0x7f05d406c160] Setting 'pixel_aspect' to value '1/1'
[ffplay_buffer @ 0x7f05d406c160] Setting 'frame_rate' to value '24000/1001'
[ffplay_buffer @ 0x7f05d406c160] w:720 h:404 pixfmt:yuv420p tb:1/24000 fr:24000/1001 sar:1/1 sws_param:
[ffplay_crop @ 0x7f05d406cb20] Setting 'out_w' to value 'floor(in_w/2)*2'
[ffplay_crop @ 0x7f05d406cb20] Setting 'out_h' to value 'floor(in_h/2)*2'
[AVFilterGraph @ 0x7f05d4000b80] query_formats: 3 queried, 2 merged, 0 already done, 0 delayed
[ffplay_crop @ 0x7f05d406cb20] w:720 h:404 sar:1/1 -> w:720 h:404 sar:1/1
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 151 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 25
Current serial number in output stream: 26
I was unable to google Major opcode of failed request: 151 (XVideo) for a few hours. I'm running:
[vyktor@machine ~]$ uname -a
Linux machine 3.17.4-1-ARCH #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014 x86_64 GNU/Linux
[vyktor@machine ~]$ pacman -Ss vlc
extra/phonon-qt4-vlc 0.8.2-1
Phonon VLC backend for Qt4
extra/phonon-qt5-vlc 0.8.2-1
Phonon VLC backend for Qt5
extra/vlc 2.1.5-5 [installed]
A multi-platform MPEG, VCD/DVD, and DivX player
[vyktor@machine ~]$ pacman -Ss ffmpeg
extra/ffmpeg 1:2.5-1 [installed]
Complete and free Internet live audio and video broadcasting solution
extra/ffmpeg-compat 1:0.10.15-1 [installed]
Complete and free Internet live audio and video broadcasting solution
extra/ffmpegthumbnailer 2.0.9-2 [installed]
Lightweight video thumbnailer that can be used by file managers.
extra/gst-libav 1.4.4-1 [installed]
Gstreamer libav Plugin
extra/gstreamer0.10-ffmpeg 0.10.13-2 (gstreamer0.10-plugins) [installed]
Gstreamer FFMpeg Plugin
extra/kdemultimedia-ffmpegthumbs 4.14.3-1 (kde kdemultimedia)
FFmpeg-based thumbnail creator for video files
community/ffmpeg2theora 0.29-6
Simple converter to create Ogg Theora files
community/ffms2 2.20-2
A libav/ffmpeg based source library and Avisynth plugin for easy frame accurate access
community/winff 1.5.3-2
GUI for ffmpeg
[vyktor@machine ~]$ pacman -Ss chromium
extra/chromium 39.0.2171.95-1 [installed]
The open-source project behind Google Chrome, an attempt at creating a safer, faster, and more stable browser
community/chromium-bsu 0.9.15.1-1
A fast paced top scrolling shooter
community/fcitx-mozc 1.15.1917.102-1
Fcitx Module of A Japanese Input Method for Chromium OS, Windows, Mac and Linux (the Open Source Edition of Google Japanese Input)
VLC opens and runs audio but with no video.
In chromium, video runs just fine.
I think (I'm not sure) that first youtube video stops vlc/ffplay from working properly.
Further more, after setting video output to X11 instead of "Default" in VLC videos start playing again, but still no luck with ffplay.
Output device set to X11 works (although with some errors):
[vyktor@machine ~]$ vlc --vout X11 file.mp4 -v
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1344118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libvcdx_plugin.so' (libvcdinfo.so.0: cannot open shared object file: No such file or directory)
[0x1344118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libprojectm_plugin.so' (libprojectM.so.2: cannot open shared object file: No such file or directory)
[0x1344118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libgoom_plugin.so' (libgoom2.so.0: cannot open shared object file: No such file or directory)
[0x1344118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/codec/libtwolame_plugin.so' (libtwolame.so.0: cannot open shared object file: No such file or directory)
[0x1414c38] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1344118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[0x7f4c80c01598] mp4 stream warning: unknown box type btrt (incompletely loaded)
[0x7f4c80c01828] mp4 demux warning: CTTS table
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f4c81601b08] faad decoder warning: decoded zero sample
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f4c8155a5f8] avcodec decoder warning: disabling direct rendering
[0x7f4c64001248] main vout display warning: VoutDisplayEvent 'pictures invalid'
[0x7f4c64001248] main vout display warning: VoutDisplayEvent 'pictures invalid'
[0x7f4c64001248] main vout display error: Failed to resize display
[0x1414c38] alsa audio output warning: device cannot be paused
With XVideo:
[vyktor@machine ~]vlc --vout XVideo file.mp4 -v
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bd9118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libvcdx_plugin.so' (libvcdinfo.so.0: cannot open shared object file: No such file or directory)
[0x1bd9118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libprojectm_plugin.so' (libprojectM.so.2: cannot open shared object file: No such file or directory)
[0x1bd9118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libgoom_plugin.so' (libgoom2.so.0: cannot open shared object file: No such file or directory)
[0x1bd9118] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/codec/libtwolame_plugin.so' (libtwolame.so.0: cannot open shared object file: No such file or directory)
[0x1ca9c38] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1bd9118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[0x7f2f98c01598] mp4 stream warning: unknown box type btrt (incompletely loaded)
[0x7f2f98c01808] mp4 demux warning: CTTS table
[0x7f2f99601908] faad decoder warning: decoded zero sample
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f2f9955a668] avcodec decoder warning: disabling direct rendering
[0x7f2f78001248] main vout display error: Failed to resize display
[0x1ca9c38] alsa audio output warning: device cannot be paused
With -vv:
[0x7f7a30001248] xcb_xv vout display debug: cannot put image: X11 error 1
[0x7f7a30001248] xcb_xv vout display debug: cannot put image: X11 error 1
[0x7f7a30001248] xcb_xv vout display debug: cannot put image: X11 error 1
[0x7f7a30001248] xcb_xv vout display debug: cannot put image: X11 error 1
[0x7f7a30001248] xcb_xv vout display debug: cannot put image: X11 error 1
[0x7f7a30001248] xcb_xv vout display debug: cannot put image: X11 error 1
Last edited by vyktor (2014-12-11 11:33:12)

I have few mkv files and the result is the same.
ffplay -vn works, with video I get Major opcode of failed request: 151 (XVideo)
I've added output from VLC to original post with output out of different VLCs --vouts...

Open multiple pdfs in one acrobat window

There are many things annoying about Acrobat, but the one that really gets me is that the option to open multiple pdfs in the same window, rather than splattering them all over the toolbar, apparently has been removed in the latest versions. I have been using Foxit for pdfs for the past few years and am only now returning to acrobat because we've purchased a piece of software that requires a plugin that works only in acrobat.
Tabs are the proper solution. How long ago did Firefox shake up the browser community with tabs, 15 years ago? Where was Acrobat? For a while, they bodged together a preference that would keep them all in the same window (no tabs however), but even that is gone.

You can make a feature request here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
On Thu, Sep 4, 2014 at 8:15 PM, whatsamattau <[email protected]>

Monodevelop DEBUG Crash.

Hi guys.
here is the problem:
Monodevelop make a CRASH each time i use it to DEBUG and application.
Mdb from console works correctly.
Here is the output of monodevelogp debugger:
Module TestNew, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null loaded.
Thread 1 received signal 11.
Stacktrace:
Native stacktrace:
/usr/bin/mono [0x4a8fb0]
/usr/bin/mono [0x4db6cd]
/lib/libpthread.so.0 [0x7fdccab82920]
[0x7fffd387fb41]
=================================================================
Got a SIGSEGV while executing native code. This usually indicates
a fatal error in the mono runtime or one of the native libraries
used by your application.
=================================================================
Thread 1 received signal 6.
Thread 3 exited.
Thread 2 exited.
Thread 1 exited.
Process 1 exited.
Target exited.
Usings:
extra/mono 2.2-1
Free implementation of the .NET platform including runtime and compiler
extra/mono-addins 0.4-1
a generic framework for creating extensible applications and for creating
libraries which extend those applications
extra/mono-debugger 2.2-2
The Mono Debugger
extra/mono-tools 2.2-1
collection of testing and development tools for use with mono (including
monodoc browser)
community/monodevelop 1.9.3-1
A Mono port of SharpDevelop, a .NET Integrated Development Tool [MD 2.0
beta]
local/monodevelop-debugger-mdb 1.9.3-1
Mono Debugger support
local/webkit-sharp 0.2-1
WebKit bindings for Mono
extra/xsp 2.2-1
A simple webserver based on mono - provides ASP.NET support
PS: local packages are downloaded from aur.
I'm on Arch64.
anyone has the same problem?
or..
anyone can help me?
thx in advance.

k.. i'll wait...

Mono-debugger CRASH on arch_86_x64

Hi at all, guys!
Someone had tried mono-debugger on x64?
i just try this:
# pacman -Sy mono-debugger
(all completed succesfully)
and then:
$ mdb
Unhandled Exception: System.TypeInitializationException: An exception was thrown by the type initializer for Mono.Debugger.Frontend.GnuReadLine ---> System.DllNotFoundException: libmonodebuggerreadline
at (wrapper managed-to-native) Mono.Debugger.Frontend.GnuReadLine:mono_debugger_readline_static_init ()
at Mono.Debugger.Frontend.GnuReadLine..cctor () [0x00000]
--- End of inner exception stack trace ---
at Mono.Debugger.Frontend.CommandLineInterpreter.Main (System.String[] args) [0x00000]
i've tried on others 2 instance of Archx64 and the error is the same.
Someone can say me hot to solve this damn problem?
I NEED IT!!!
PS: sorry for my poor eanglish (i'm italian).
Thanks in advance.
Poor Magius
Last edited by magiusche (2009-03-20 13:08:41)

that's the problem.
i've installed following package too:
pacman -S mono-addins mono mono-debugger mono-tools monodevelop
as results i have:
extra/mono 2.2-1
Free implementation of the .NET platform including runtime and compiler
extra/mono-addins 0.4-1
a generic framework for creating extensible applications and for creating
libraries which extend those applications
extra/mono-debugger 2.2-1
The Mono Debugger
extra/mono-tools 2.2-1
collection of testing and development tools for use with mono (including
monodoc browser)
community/monodevelop 1.9.3-1
A Mono port of SharpDevelop, a .NET Integrated Development Tool [MD 2.0
beta]
but... the error is the same...
$ mdb
Unhandled Exception: System.TypeInitializationException: An exception was thrown by the type initializer for Mono.Debugger.Frontend.GnuReadLine ---> System.DllNotFoundException: libmonodebuggerreadline
at (wrapper managed-to-native) Mono.Debugger.Frontend.GnuReadLine:mono_debugger_readline_static_init ()
at Mono.Debugger.Frontend.GnuReadLine..cctor () [0x00000]
--- End of inner exception stack trace ---
at Mono.Debugger.Frontend.CommandLineInterpreter.Main (System.String[] args) [0x00000]
it seems that there is a missing library "libmonodebuggerreadline"
but with this command: # ls /usr/lib/libmono* -l
-rw-r--r-- 1 root root 5512 23 gen 16:30 /usr/lib/libmono-profiler-aot.a
lrwxrwxrwx 1 root root 29 23 gen 16:28 /usr/lib/libmono-profiler-aot.so -> libmono-profiler-aot.so.0.0.0
lrwxrwxrwx 1 root root 29 23 gen 16:28 /usr/lib/libmono-profiler-aot.so.0 -> libmono-profiler-aot.so.0.0.0
-rwxr-xr-x 1 root root 11171 23 gen 16:30 /usr/lib/libmono-profiler-aot.so.0.0.0
-rw-r--r-- 1 root root 5438 23 gen 16:30 /usr/lib/libmono-profiler-cov.a
lrwxrwxrwx 1 root root 29 23 gen 16:28 /usr/lib/libmono-profiler-cov.so -> libmono-profiler-cov.so.0.0.0
lrwxrwxrwx 1 root root 29 23 gen 16:28 /usr/lib/libmono-profiler-cov.so.0 -> libmono-profiler-cov.so.0.0.0
-rwxr-xr-x 1 root root 11280 23 gen 16:30 /usr/lib/libmono-profiler-cov.so.0.0.0
-rw-r--r-- 1 root root 79430 23 gen 16:30 /usr/lib/libmono-profiler-logging.a
lrwxrwxrwx 1 root root 33 23 gen 16:28 /usr/lib/libmono-profiler-logging.so -> libmono-profiler-logging.so.0.0.0
lrwxrwxrwx 1 root root 33 23 gen 16:28 /usr/lib/libmono-profiler-logging.so.0 -> libmono-profiler-logging.so.0.0.0
-rwxr-xr-x 1 root root 69356 23 gen 16:30 /usr/lib/libmono-profiler-logging.so.0.0.0
-rw-r--r-- 1 root root 5724460 23 gen 16:30 /usr/lib/libmono.a
lrwxrwxrwx 1 root root 16 23 gen 16:28 /usr/lib/libmono.so -> libmono.so.0.0.0
lrwxrwxrwx 1 root root 16 23 gen 16:28 /usr/lib/libmono.so.0 -> libmono.so.0.0.0
-rwxr-xr-x 1 root root 3231368 23 gen 16:30 /usr/lib/libmono.so.0.0.0
-rw-r--r-- 1 root root 323618 23 gen 16:39 /usr/lib/libmonodebuggerreadline.a
-rwxr-xr-x 1 root root 919 23 gen 16:39 /usr/lib/libmonodebuggerreadline.la
lrwxrwxrwx 1 root root 32 23 gen 16:39 /usr/lib/libmonodebuggerreadline.so -> libmonodebuggerreadline.so.0.0.0
lrwxrwxrwx 1 root root 32 23 gen 16:39 /usr/lib/libmonodebuggerreadline.so.0 -> libmonodebuggerreadline.so.0.0.0
-rwxr-xr-x 1 root root 207385 23 gen 16:39 /usr/lib/libmonodebuggerreadline.so.0.0.0
-rw-r--r-- 1 root root 1601982 23 gen 16:39 /usr/lib/libmonodebuggerserver.a
-rwxr-xr-x 1 root root 983 23 gen 16:39 /usr/lib/libmonodebuggerserver.la
lrwxrwxrwx 1 root root 30 23 gen 16:39 /usr/lib/libmonodebuggerserver.so -> libmonodebuggerserver.so.0.0.0
lrwxrwxrwx 1 root root 30 23 gen 16:39 /usr/lib/libmonodebuggerserver.so.0 -> libmonodebuggerserver.so.0.0.0
-rwxr-xr-x 1 root root 1190641 23 gen 16:39 /usr/lib/libmonodebuggerserver.so.0.0.0
all seems corrects...
i have tried to remove completly MONO and all it's references bbut there is same result.
ive tried to install into other 3 machines (with arch x64) ad there is same results.
so...
anyone have same ideas?
thx again.

Call Server not coming up

ICM 7.5
CVP 7.0
The call server is not coming up.
here is the log from voice browser.
13:15:08 Initializing Event Management System (EMS) Library.
13:15:08 Trace: EMS Server pipe Customer\Voice Browser\VBEMSPipe enabled for Customer\Voice Browser\VB
13:15:08 Trace: Release 7.0.1, Build 1190
13:15:08 Trace: INFO: Registry base = CVP\Customer\Voice Browser
13:15:08 Trace: INFO: Process Name = VB
13:15:08 Trace: INFO: ICRRoot = C:\Cisco\CVP\bin
13:15:08 Initializing Node Manager Library.
13:15:08 Trace: INFO: Voice Browser Reading Registry...
13:15:08 Trace: Monitor Server pipe Customer\Voice Browser\VBCmdPipe enabled for Customer\Voice Browser\VB
13:15:08 Trace: Monitor Server pipe Customer\Voice Browser\VBReadOnlyCmdPipe enabled for Customer\Voice Browser\VBReadOnly
13:15:08 Trace: INFO: Voice Browser initializing globals...
13:15:08 Trace: INFO: VBRegistry::SetRegNotify Setting Registry trace
13:15:08 Trace: INFO: Voice Browser starting threads...
13:15:10 Trace: INFO: Resolving IP address for ICMGRPCVP1
13:15:12 Trace: INFO: IP address for ICMGRPCVP1 is 10.20.20.60
13:15:12 Trace: INFO: Gatekeeper configured is 10.20.61.92;SIDEA;1719. Registration attempts will start with first GK in this list until a successful registration occurs
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: maxCalls(defined in radvision config as Q931.maxCalls) = 1400
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: maxIVRPorts = 130
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: maxTotalCalls = 555
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: takebackPercentage = 0
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: startingRtpPort = 16384
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: radConfigPath = C:\Cisco\CVP\VoiceBrowser\Config.val
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: pktInterval = 20
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: adminMode = 1
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: RaiMaxThreshold = 90
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: RaiMinThreshold = 80
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: Codec = g711Ulaw64k
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuMaxThreshold = 99
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuMinThreshold = 94
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuHealthCheck = 0
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuSustainedTime = 15
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: CpuOverloadReject = 0
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: PerfmonIntervalTimer = 5000
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: MemMaxThreshold = 80
13:15:12 Trace: INFO: H323CallMgr::getRegistrySettings: MemMinThreshold = 60
13:15:12 Trace: INFO: Voice Browser Main Thread Active...
13:15:12 Trace: INFO: H.225 Call signalling address of Voice Browser is 10.20.20.60:1720
13:15:12 Trace: INFO: Voice Browser Trace Mask is 0x101083
13:15:12 Trace: INFO: Initial registration with gatekeeper
13:15:12 Voice Browser communication to the Gatekeeper successful, alarm cleared.
13:15:12 Trace: SYSLOG: Server: STATUS=2, Port: =H323,NAME=H.323Ser?+wSTATUS=2
13:15:12 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability
13:15:12 Trace: INFO: LongPoll Failed -- Got OUT_OF_SERVICE from Call Server
13:15:13 Trace: INFO: Starting HEALTH long poller to Call server localhost:8000/cvp/VBServlet
13:15:13 Voice Browser to Call Server localhost:8000 connection unsuccessful.
13:15:13 Voice Browser cannot access any Call Servers and is no longer accepting calls.
13:15:13 Voice Browser ICMGRPCVP1 is out of service.
13:15:13 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability

Dear Geoff;
I am facing the same thing, but in the OAMP is shown to be down and not able to get any statistics on this CVP Call Server.
Actually the PG01, PG02 and PG03 are enabled in the router registry (while PG01 for CUCM PG, PG02 for CVP Call Server PG and PG03 for the Media Routing PG).
It was working before and I was receiving calls on it, but suddenly this happened.
Actually, an upgrade happened from version 7 to version 8 and we imported new licenses for the VXML Server but did not import new licenses for the CVP Call Server. Could be a license issue because we have to import the new license to change from version 7 to version 8?
Thanks in advance for the help.
Regards
Bilal

JWS to browser communication?

Similar Messages

Maybe you are looking for