K7N2 System Reboot During Application

Ive Been reading threads to figure this out and I am sure I will see same responces! But here it goes, I have the " k7N2 Delta " and I have retail 3200 XP,
Kingston Value ram PC3200 184 DIMM 512MB, All 3 ram slots filled 1.5 Gig ram, i have geforce FX5600 256MB card, its places in AGP slot! I have 3 Hard drives, Primary maxtor 60 gig ata/133 7200 rpm. secondary maxtor 80 gig ata/133 7200rpm- secondary slave maxtor 250 gig ata/133 7200 rpm I have thermaltake 560 watt silent power supply, my bios is 7.7 my drivers current! I have defaulted CMOS but my problem is, The system randomy locks up (freezes) and during applications or when its thinking, it ill shut down! At 1st i was convinced it was over heating but, I got new case and power supply and still restarts mostly when playing game or installing game
Any Ideas what I can do to stop lock up or stop system from restarting?
Im now thinking its ram but, I want everyone opinon!

Thank You both for helping!
The ram I am using is on the list and will be returned!
Also too the list the " Mushkin PC400 " looked to be good so, Iam going to buy 2 gigs of it!
Also thanks for heads up on mushkin and the help with PSU. Looks as if alot people having issues with this deck and you are right, its picky!
Atleast this problem appears to be fixed thanks

Similar Messages

System rebooting during heavy cpu tasks

I have a K7N2 (MS-6570) board with 1GB ram using 2 mushkin PC2700 ram sticks running win2k with the latest bios and nvidia drivers.
When I try to perform intensive CPU tasks such as running the united devices distributed program or the distributed.net applications, render images or even build large source code modules the system reboots with no warning.
Occasionally I'll play a game and in the middle of it the system hangs and then claims I've executed invalid instructions and windows kernal gets corrupted and then reboots.
During rendering I get random STOP 0x errors, never the same one twice.
The timings are at 166fsb, memory at 1:1 (333mhz) clock at 12x5 CPU speed at 2088 mhz.
If I use auto-defaults memory timings goes to 7-3-3-2.5 but the mushkin website claims the ram should be at 2-2-2 so I set it that way and still I get wierd errors.
This is the 6th memory pair I've tried so far, could I possibly have a bum board or processor instead?
Is there a "safe" memory timing I can try to see if its the ram or my system itself thats bad. I'm close to giving up on this board and going the intel route.

Whew.
I'm glad you had the spare supply; I usually recommend "trying before buying" anything, unless, of course, one has lots of cash to blow.
I also wanted to tell you that, if your 2.03 driver method doesn't work, try this:
Go to Start, Run, type in MSCONFIG, press Enter, press the Services tab, check the Hide All Microsoft Services box, press the Disable All button, select the Startup tab, press the Disable All button, Apply, OK, and Restart.
After the reboot, try your games again, and see what happens. If everything's ok, then go back and enable the startup services one at a time, and try playing again until you find the offending service. If all is ok, do the same with the Services tab, until you find the offending Service.
(I spent hours online with Microsoft on this a couple of months ago, and this method found that the intermittent crashing problem was caused by one of the nVidia services.)
So far, I have had four causes of this type of problem (BSOD, spontaneous reboot, freezing):
1) Corrupted OS/driver
2) Poor power
3) Bad RAM
4) Startup Service
Of course, #1 and #4 don't cost anything but time and effort to fix, and should be tried first, unless anything is grossly wrong, like an underrated supply, and/or ram which won't pass memtest, which one should replace anyway. (I've got a lifetime warranty on the RAM, and only had to return it for replacement.) So the only thing that cost me to repair this problem completely was the replacement of the PSU, and it was the very last thing I did.
Were I to do it over again, I would have replaced the PSU before I actually put the replacement RAM in, because I risked damaging the new RAM (and the old stick too) with my old 300W supply. (However, I was on a severe cost restriction which influenced my decision, making the "free fixes" the priority.)
Hope this helps.

System Crash during Application Termination

I am having a hard time thinking where I should appropriately put this topic because I believe it is not really centered in the "game development" per se... but since I have experienced this problem with all the games I am currently developing and with all the previous games I have developed, I decided to put these topic in this category...
anyway, my problem is whenever I terminate my program, which uses a lot of .GIF or .JPG images (imported via the getToolkit().getImage method) my computer hangs!
this problem happens only in my new desktop computer. when I run my applications in my laptop everything goes smoothly even after i terminate the applications.
my suspicion is that my computer is configured differently. and honestly i dont know the exact configurations of my desktop since I was not present at the time when the installations were made..
here is the rough config/settings/hardware components of my machine:
-running on windows xp professional
-j2sdk1.4.2
-ati radeon 7200 on graphics
-pentium 4 2.3 GHz
-my harddisk is partitioned into two and it seems that the windows system files reside in the secondary partition
does anyone know about this issue with regards to the J2SDK?
is there an issue regarding J2SDK not being compatible with my above settings (in at least one case)?
thanks everyone and have a nice day...

are you also using fullscreen or bufferstrategy? and
are you terminating your app with System.exit().
System.exit() often doesn't properly clean up either
of the above 2 features. (it seems to be dependant on
your gfx drivers)yeah, i forgot to mention that i terminate my applications using System.exit(), and i use a fullscreen, borderless window...
thanks for the info. =) i had a suspicion of the system not having proper cleanup but i didn't have any solid proof.. i always thought System.exit() deals with such operations properly...
is there a better solution to this?
again, thanks a lot!

ZenAgent Reboots During Imaging After Upgrade

Went from 11.2.3a > 11.3 > 11.3.1 > 11.3.1 FRU1
Zenworks is rebooting during application installs during imaging now. Here is the message: "Your system is being restarted to finish applying the Zenworks configuration changes that have occurred."
I found this article, but it doesn't apply to this version: https://www.novell.com/support/kb/doc.php?id=7009609
How can I prevent the restart from happening?

Nzorn,
then I'd say it would be worth opening a Support incident with us at ENGL, then I can take a look at the logs... if it turns out to be a Novell issue, then we can bring the conversation back here...
I'd want a debug zim.log https://www.engl.co.uk/kb/tid-2006018.htm and possiblt with the imaging codes as well https://www.engl.co.uk/kb/tid-2011007.htm
Shaun Pond
newly reminted as a Knowledge Professional

Reboot during lion installation

Hi @all,
i've downloaded lion from the App-Store.
After the download the installer startet automaticly and reboot the System.
The problem is, that the installer starts after the first reboot and failed with no error and shutdown the system.
After restart the MacBook Pro, the system reboots during the installation anymore,
what can i do ?
thx
forti

http://www.apple.com/support/mac/app-store/contact.html?form=account

PT880 Neo-FSR Reboot During Gameplay

First, thanks to all who will read and hopefully reply to this post. Your volunteer tech support is much appreciated.
I recently build my first computer (specs in sig) and am currently having issues with my system rebooting during any gameplay that utilizes my graphics card. After 4-5 minutes of gameplay my game will freeze for 10 seconds or so and then my monitor will lose signal and my system appears to reboot but never actually reboots. In BIOS my cpu temp appears to be running in the low 50s C and case in the high 40s C though Motherboard Monitor shows a steady cpu temp of 44-48 C and a case temp of 34-37 C. While this would appear high to me, I don't believe it is the culprit as I have used fairly cpu intensive apps in XP without any crashes or reboots.
I've read numerous threads on this board and others offering several potential fixes for issues with ATI cards and I have tried the following: set AGP to 4x from 8x, disabled fastwrites, changed AGP frequency from 66.6 to other settings, upped AGP voltage to 1.6, 1.7 and 1.8v, upped DDR voltage to 2.7v, upped Northbridge voltage to 1.68, disabled and enabled hyperthreading, and tried various incarnations of the catalyst drivers.
I also ran memtest86 for one pass tonight and returned 13,538 errors, though this is the same memory I was using in my previous system with this same card and a slower (P4 1.5 ghz) processor and I never received these reboots during games.
I have not attempted to flash my bios to a more current version because as this is my first time building a computer I am not at all confident that I wouldn't screw something up in the process and end up with a dead board; not to mention in all the similar threads I've read, updating the bios hasn't fixed this problem.
I've read that my +12v (16A) may be too low for a prescott 3.2; however, since my system seems to do fine with everything except for games, I'm inclined to believe that this is an ATI/MSI compatibility issue rather than a power supply issue. That being said, I am very much a newbie at this and will take any and all advice given seriously, but would like to avoid shelling out $50-60 for a new PS after I just spent ~$300 for a new CPU/mobo.
Thanks again for reading and responding and I'll do my best to answer any follow up questions to details I'm sure I missed.

Well my problem is now officially more confusing now :(
I installed my new memory and I'm still getting relatively the same number of errors in memtest test #7. I tried numerous different configurations such as single vs. dual channel, 333mhz vs. 400mhz RAM speeds, voltages, etc. with no significant changes. My gaming is a little more stable but it appears this is only true in multiplayer games. Here's a breakdown of the games I tested:
Halflife2 single player: Played for 10 minutes, no crash
Halflife2 multiplayer: Played for 15 minutes, no crash
Doom3 single player: played for 2-3 minutes, game froze and system became non-responsive
Starwars Battlefront single player: crashed 30 seconds in, game froze and monitor signal was lost
Starwars Battlefront multiplayer: played for 10-15 minutes, no crash
Wolfenstein Enemy Territory multiplayer: played for 10-15 minutes, no crash
I would say that my problem occurs whenever I play a game that taxes my system more since the multi settings are generally lower than single player; however, that doesn't explain why halflife 2 single player works. Since my RAM is new I would say the problem is my vid card except I was using this same vid card on my last system with these same games and never got these kinds of crashes.
The only other thing I can think of is that maybe my RAM slots are bad since my brand new RAM generated the same number of errors during the same test in memtest.
Any thoughts or suggestions?

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

The DPM service terminated unexpectedly during completion of the job. The termination may have been caused by a system reboot. (ID 910)

The DPM service terminated unexpectedly during completion of the job. The termination may have been caused by a system reboot. (ID 910)
No idea what happen and how to fix this?

I still got this on full backup to tape, anyone experienced this issue?

Safari hangs and forces a system reboot

This happens more frequently recently. Out of the blue, Safari (v8.0.3) under OS X 10.10.2 freezes OS X completely and the system reboots. It happens on simple HTML only websites that don't require any scripts - e.g. forums. The screen resolution appears to be lowered when logging back in, but once the system has loaded everything seems to be normal (even Safari remembers all the sites).
Aside from the ongoing WiFi issues, Yosemite is the first Apple OS that seems to crash frequently on me...
Who else is experiencing these issues?
2012 MacBook Pro Retina
16 Gb, 512 Gb SSD

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1236 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile CFBundleIdentifier 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:per sec:ms/s:KiB/s:%:total:MB:total' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' '%s %s\n' '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n   ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n   '"${k[22]}"'mod date: %s\n   '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~/P.+ts:/&&$2>'${p[19]}') { print $1" "int($2);} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp].+|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n   "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n   "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n   "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n   "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+5;i++)u[i]=u[2];split("'"${k[28]}"'",l,":");for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n   '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[20]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): ./d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' BEGIN{ FS=": "} /^C/ { getline t;if(a[split(t,a)]) print $2;} ' ' 1s/^/\'$'\n''/;3,4d;$d;/^ +D|Of|Fu| [0B]/d;s/^ {4}|:$//g;p;' ' BEGIN { FS=":";} NR==1 { print "\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;sub(/,.+/,"");L[i]=l$2;if(i=='${p[24]}') nextfile;} END { for(j=0;j<i;j++) print L[i-j];} ' ' /services =/,/[\}]/!d;/[=\}]/!p ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(mplet|nabl)ed|ry HD|safe b' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA|pagin|Purg|error|Refus|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} dump-trust-settings\ {-s,} '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[20]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[20]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "^[ }]|deprec|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[20]}'=*"' -m\ / print\ system );N1=${#c2[@]};for j in {0..19};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM Bundles{,' (new)'} 'Trusted certs ('{system,user}\) );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99; for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 42 70 101 25;D2 65 6 76 13;D2 45 20 52 66;D4 66 7 37 14;D4 17 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 37 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 25 22 20 32;D2 33 0 N1+14 51;D4 69 29 35 104 75 96;D4 70 29 36 104 75 96;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 32 31 43;B2&&D4 59 4 65 76 91;D4 63 4 19 44 75 95 96;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 12;D4 15 5 72 12;C4;};D4 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 18 77 107 94 74||{ B2&&A1 18 26 94 74;}&&{ B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D4 60 14 66 92;D4 58 14 67 93;D4 26 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 105; A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 106;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Message sending during application processing

Hi Experts,
I want to send a message via IDOC marked as "to be processed immediate"(4) during application saving. In USEREXIT_SAVE_DOCUMENT a message is inserted into NAST. Transaction is VA11. The message should be processed during saving of document. But it is not sent. If it is marked as to be processed by job (1) and RSNAST00 is used it works. Other messages found by condition during VA11 processing are processed immediately.
Thanks in advance

Hi,
It's single server installation.
I got the following suggestions from SAP from a message i sent them, i.e. "An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full"
1. took /3GB switch out of boot.ini
2. Configured Analysis Services memory from:
LowMemoryLimit - 1835008000 - 1750 MB
TotalMemoryLimit - 2831155200 - 2700 MB
to
LowMemoryLimit - 1218445312 - 1162 MB
TotalMemoryLimit - 1835008000 - 1750 MB
3. Rebooted Server.
Appreciate it if you have any comments about this.
Regards,
Lip Chean

Unexpected reboot during simulation using multisim on AMD dual core processor

We are using NI-multisim 10 in a classroom environment and are experiencing sudden reboots during simulation without giving any error or warning. This happens on multiple machines, all being Dell Optiplex 740 with AMD DC 2Ghz as processor. Since these problems happen so frequently, making teaching quite impossible, we have shifted PC-room and are now using older machines. On these machines - Dell GX280 using intell P4HT-2,8 Ghz - we experience no more problems.
Is this reboot problem related to the article : Unexpected Errors with DAQ Device on AMD Dual Core Machine (http://digital.ni.com/public.nsf/allkb/9CE22FE099AFB8BF862572FF007A5D45) and what do we have to do to fix this problem?

Nic
Can you verify your driver versions? Make sure that you are running the latest versions of NI drivers to ensure proper compatibility. If possible, you might try upgrading to multisim 11. If this does not solve the issue, try the single processor workaround in outlined in the following KB:
http://digital.ni.com/public.nsf/allkb/D0FC3BE7D9F331398625731A005D76B8?OpenDocument
Altough it is surely decreasing the performance of the system, certain cases have shown that there is no other possible workaround unfortunately.
Best Regards
Michiel
Applications Engineer
NI Belgium
http://www.ni.com/ask

IDVD encoding causes system failure during burn process

I have iDVD 5 on my work computer (dual 2.7Ghz G5 / 2.5 G RAM), and have burned successfully before my current project.
My current project has a 28:45 movie and I have tried two different themes with different combinations of drop zones (one with the movie as the drop zone and one with stills only) and everything previews okay, but when I start the burn process it will get to a certain point in the encoding and then the whole system crashes. I come back to check on the process, and my screen is filled with black squares with error info in it... (looks like a DOS screen or something) and it says something about system failure and that I need to restart my computer.
I'm so stubborn that I keep trying different combinations of possibilities but I'm having no luck. The movie that it's hangin up on was captured in Final Cut Pro from a VHS, edited in Final Cut to trim the excess black, and exported as a Final Cut Movie that I imported into iDVD.
As I said above, I have burned successfully on this computer and this iDVD, so the fact that this one project refuses to burn is perplexing.
any thoughts?

A gap in video would be a space between one clip and another. This is a problem when you are editing your footage, not capturing it. In other words, it is a user introduced problem.
In FCP when you say "Ignore Timecode Breaks" it just means to continue capturing video even if there is a timecode break. If you do not select this option, FCP would immediately stop catpturing whenever it hit a timecode break. A timecode break is not the same thing as a gap you create during editing. A timecode break could be as simple as rewinding your camera footage and then recording over it... the timecode now has a break because it is not continuous timecode, it jumps from one timecode to another.
Depending on what device you are capturing from, your audio may come in a few frames before or after the video. This would be especially true for a non-controllable device. It is a simple fix to adjust this as you would have noticed any sync issues right in the timeline during playback.
A system reboot in the middle of encoding is a serious crash... I doubt if it is the footage per se that is causing this to happen. Footage has been known to force an application to abort a process (or stay in an infinite loop), but an actual system shutdown would be extremely rare.
Consider recapturing the footage into a new FCP project and then creating a new iDVD project for it, this will eliminate either a corrupted FCP file or an iDVD project from the equation. Also, are you burning directly to disc or are you preparing a disc image? I'd go with the disc image approach because you can test your final build that way.

Reboots during a call

my iphone 3Gs will reboot during a call some times after five minutes or it will go for twenty minutes with no problem.
had a standered3G iphone no one could help me. all was good untill i updated the firmware i said and they added do a system restore ,did that but nothing changed.got rid of that one got a 3Gs conacted it to itunes it requested i update the iso so thinking all would be good made my first phone call after that and it rebooted im fed up with this i hope you understand im tired of searching the internet for help going to phone shops talking to un trained people who only know how totake your money.im looking a samsung now hopfully i can make aphone call stress free.amimaking the right choice ?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

System reboot itself randomely and black sreen

I have this MB (Bios 7.6, Msi K7N2 DELTA ILSR (M6570)) since Dec 2003 without problems, very stable.Last week i decide to upgrade Bios (7.8) and at that point pc was booting itself randomely also geting some blackscreen....
I re-install Xp, i re-flash Bios back to 7.6 and still getting the same problems.
If someone have some advice or any hint. Please let me know. Thanks....

System reboots might be attributed to various factors like Memory, PSU and software crashes.
Well to start off disable the system restart option in Startup & recovery option in system properties. To reach there :
Right Click My Computer->Advanced->startup and recovery
Uncheck restart computer on error
Now After doing the above step will come to know if any application or drivers are causing a reboot. You will usually get a memory dump and name of the file causing the dump.
Secondly check for system temps, are any of the fans noisy?? not working???
Check the idle and load temps
feel the air coming out of the PSU exhasut, is it mild warm or really cooked up??
Last but not the least check whether this occurs in any particular application/game or whether you can reproduce the crash/reboot. This will provide insight to resolving the problem quickly and effectively.
hope this helps
Thanks
Rajiv

Message bean does not start automatically during application server startup

I have a message bean that does not start up during application server startup. I am able to successfully start the application manually using the visual admin tool.I searched the logs and found the following error. The error references the "QueueConnectionFactory" is not deployed or is not started. I have check and the "QueueConnectiopnFactory" is deployed. Is this a problem with the application trying to start before the "QueueConnectionFactory"? Is thier a way to define a dependency on my application not to start until the "QueueConnectionFactory" has been started, if so can how would I define this dependency. Please provide and example.
Thanks,
Bill
#1.5 #001CC4695AD8001A000000100000079C00045DB6C93D4DAD#1228939548538#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Connecting Model Repository ...#
#1.5 #001CC4695AD8001A000000110000079C00045DB6C93D4E1D#1228939548538#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Checking source path: halliburton.com/hal~usrgrpap#
#1.5 #001CC4695AD8001A000000120000079C00045DB6C93D4EAC#1228939548538#System.err##System.err#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Error##Plain###[RunTask] The source file/path doesn't exist: halliburton.com/hal~usrgrpap#
#1.5 #001CC4695AD8001A000000130000079C00045DB6C93D4EF5#1228939548538#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Opening connection to MMR ...#
#1.5 #001CC4695AD8001A000000140000079C00045DB6C93D69D0#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Start local transaction ...#
#1.5 #001CC4695AD8001A000000150000079C00045DB6C93D6B5A#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Commit ...#
#1.5 #001CC4695AD8001A000000160000079C00045DB6C93D6C8B#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Running task 'com.sap.ip.mmr.db.tasks.TaskUndeployFromDB' ...#
#1.5 #001CC4695AD8001A000000170000079C00045DB6C93D8E6C#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###Close connection to Model Repository ...#
#1.5 #001CC4695AD8001A000000180000079C00045DB6C93D8EE5#1228939548553#com.sap.ip.mmr.tools.RunTask##com.sap.ip.mmr.tools.RunTask#Administrator#79423####d7c673d0c6f411dd92de001cc4695ad8#SAPEngine_Application_Thread[impl:3]_33##0#0#Info##Plain###done.#
#1.5 #001CC4695AD80018000000000000171400045DBBE9BCCED0#1228961568691#com.sap.engine.services.connector##com.sap.engine.services.connector######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error##Plain###ResourceObjectFactory.getObjectInstance(), Error: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
#1.5 #001CC4695AD80018000000010000171400045DBBE9BCE3CD#1228961568691#com.sap.engine.services.jndi##com.sap.engine.services.jndi######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Warning#1#/System/Audit#Java###Exception #1#com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name ejbContainer/mdb/halliburton.com/hal~usrgrpap/QueueConnectionFactory, cannot resolve object reference. [Root exception is com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.]
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:529)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                ... 24 more
#1.5 #001CC4695AD80018000000030000171400045DBBE9BDBF4A#1228961568753#com.sap.engine.services.deploy##com.sap.engine.services.deploy######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Server#Java#deploy_5029##Exception in operation startApp with application halliburton.com/halusrgrpap.#2#startApp#halliburton.com/halusrgrpap#
#1.5 #001CC4695AD80018000000040000171400045DBBE9BDC46C#1228961568753#com.sap.engine.services.deploy##com.sap.engine.services.deploy######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception in operation startApp with application halliburton.com/hal~usrgrpap.
                at com.sap.engine.services.deploy.server.application.ApplicationTransaction.rollbackPart(ApplicationTransaction.java:394)
                at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:367)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.engine.services.ejb.exceptions.deployment.EJBDeploymentException: Exception during the initialization of container boot class com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP.
                at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1013)
                at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                ... 12 more
Caused by: com.sap.engine.services.ejb.ContainerInitializationException: Cannot initialize message system bridge com.sap.engine.services.ejb.message.JMSBridgeFP.
                at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:451)
                at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                ... 16 more
Caused by: com.sap.engine.services.ejb.message.JMSBridgeException: Destination name PortalUserGroupProcessingQueue not found in the naming.
                at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:129)
                at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                ... 19 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name ejbContainer/mdb/halliburton.com/hal~usrgrpap/QueueConnectionFactory, cannot resolve object reference. [Root exception is com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.]
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:529)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                ... 20 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                ... 24 more
#1.5 #001CC4695AD80018000000060000171400045DBBE9BE0AF5#1228961568769#com.sap.engine.services.deploy##com.sap.engine.services.deploy######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Server#Plain###
Operation startApp over application halliburton.com/hal~usrgrpap finished with errors on server 105677750. For more detailed information see traces of Deploy Service.#
#1.5 #001CC4695AD80018000000080000171400045DBBE9BE27D1#1228961568769#com.sap.engine.services.ejb##com.sap.engine.services.ejb######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Server#Java#ejb_2119##Exception during the initialization of container boot class com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP.#1#com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP#
#1.5 #001CC4695AD80018000000090000171400045DBBE9BE2842#1228961568769#com.sap.engine.services.ejb##com.sap.engine.services.ejb######27cee540c72911ddb4ee001cc4695ad8#SAPEngine_System_Thread[impl:5]_25##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.ejb.exceptions.deployment.EJBDeploymentException: Exception during the initialization of container boot class com.halliburton.esg.eas.sec.prtusrgrpprocessing.MDBPrtUsrGrpProcBean0_0ContainerFP.
                at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1013)
                at com.sap.engine.services.ejb.EJBAdmin.prepareStart(EJBAdmin.java:2443)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:223)
                at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:176)
                at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:132)
                at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:250)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4450)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2610)
                at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2464)
                at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:42)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:144)
                at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
                at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
                at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
                at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
                at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
Caused by: com.sap.engine.services.ejb.ContainerInitializationException: Cannot initialize message system bridge com.sap.engine.services.ejb.message.JMSBridgeFP.
                at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:451)
                at com.sap.engine.services.ejb.message.MessageContainer.init(MessageContainer.java:153)
                at com.sap.engine.services.ejb.message.MessageContainerFP.init(MessageContainerFP.java:53)
                at com.sap.engine.services.ejb.EJBAdmin.prepareLoad(EJBAdmin.java:1007)
                ... 16 more
Caused by: com.sap.engine.services.ejb.message.JMSBridgeException: Destination name PortalUserGroupProcessingQueue not found in the naming.
                at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:129)
                at com.sap.engine.services.ejb.message.MessageContainer.load(MessageContainer.java:449)
                ... 19 more
Caused by: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name ejbContainer/mdb/halliburton.com/hal~usrgrpap/QueueConnectionFactory, cannot resolve object reference. [Root exception is com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.]
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:529)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:639)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at javax.naming.InitialContext.lookup(InitialContext.java:347)
                at com.sap.engine.services.ejb.message.JMSBridge.registerListener(JMSBridge.java:115)
                ... 20 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: ConnectionFactory "QueueConnectionFactory" does not exist. Possible reasons: the connector in which ConnectionFactory "QueueConnectionFactory" is defined is not deployed or not started.
                at com.sap.engine.services.connector.ResourceObjectFactory.getObjectInstance(ResourceObjectFactory.java:207)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:72)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:31)
                at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:210)
                at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:280)
                at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:414)
                ... 24 more
#1.5 #001CC4695AD80019000000000000171400045DBBEB38B908#1228961593581#com.sap.jpe.engine.impl.common.AnalyzerModel#sap.com/com.sapportals.supportplatform#com.sap.jpe.engine.impl.common.AnalyzerModel#Administrator#67####43c8e9d0c72911ddcedd001cc4695ad8#SAPEngine_Application_Thread[impl:3]_38##0#0#Error##Plain###Exception while loading class: com.sapportals.supportplatform.plugins.portal.connectors.ConnectorGatewayServiceCheck
java.lang.NoClassDefFoundError: com/sapportals/portal/prt/resource/ResourceException
                at java.lang.Class.getDeclaredConstructors0(Native Method)
                at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
                at java.lang.Class.getConstructor0(Class.java:1930)
                at java.lang.Class.newInstance0(Class.java:278)
                at java.lang.Class.newInstance(Class.java:261)
                at com.sap.jpe.engine.impl.pluginloading.PluginCollector.loadClass(PluginCollector.java:881)
                at com.sap.jpe.engine.impl.pluginloading.PluginCollector.getPluginDescFromXMLFile(PluginCollector.java:387)
                at com.sap.jpe.engine.impl.pluginloading.PluginCollector.getPluginDescFromXMLFile(PluginCollector.java:274)
                at com.sap.jpe.engine.impl.pluginloading.PluginCollector.loadPluginsFromJarFile(PluginCollector.java:169)
                at com.sap.jpe.engine.impl.pluginloading.PluginCollector.loadFromExtDirectory(PluginCollector.java:121)
                at com.sap.jpe.engine.impl.common.AnalyzerModel.loadPlugins(AnalyzerModel.java:411)
                at com.sap.jpe.engine.impl.common.AnalyzerModel.loadPlugins(AnalyzerModel.java:399)
                at com.sapportals.supportplatform.SupportPlatform.init(SupportPlatform.java:81)
                at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:59)
                at java.security.AccessController.doPrivileged(Native Method)
                at javax.security.auth.Subject.doAs(Subject.java:379)
                at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:141)
                at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
                at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
                at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                at java.security.AccessController.doPrivileged(Native Method)
                at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
                at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

I though the same thing, but XE LISTENER is running on localhost and port 1522. On the other hand XE have local_listener explicitly set to the very same connection descriptor. Even XE installation was second on this server.
I've could change that yes, but the startup script doesn't seemed to have this mind.
Regards,
Sve

K7N2 System Reboot During Application

Similar Messages

Maybe you are looking for