K9AG Neo2 Digital - power but no post 7750+(BE)

Having a problem with my K9AG Neo2 Digital, Tried booting up after my system build and nothing happens. Power comes on but there is no one home, fans spin but screen does not turn on and no beeps of any kind.
I have tried booting the system with diferent PSU, Ram, and after clearing the Cmos and with a diferent battery also.
Board is a K9AG Neo2 Digital
AMD 7750+ (Black edition)
PNY 2X2 gigs of ram installed in slots 1 and 2 (have tryed ram in all combonations of all slots)
650W PSU used
onboard vid used with everything but the PC speaker and power button disconnected to rule that stuff out
Jbat 1 is also on the correct pins 1&2
Have tried different components for everything but the CPU
Any insight as to what I need to do to get this thing running would be very helpfull.

Quote from: Addly82 on 30-May-09, 01:31:23
OK, i didnt realilize they had made bios chips that small now.... (First PC build in several years)
numbers are A7368
second line AMS150
and is there any way of flashing the updated bios without installing a CPU that this current bios supports?
Quote
numbers are A7368
second line AMS150
It means that has BIOS ver. 1.50, you need 1.70 or above with this CPU.
Quote
and is there any way of flashing the updated bios without installing a CPU that this current bios supports?
Nop, install supported CPU[borrow from friends] by current BIOS version and update the BIOS.
Or send mainboard back to reseller to update the BIOS for you

Similar Messages

K9AG Neo2-Digital Dead? Not Posting but all powered up

Hmm.
have just plugged back in my machine after decorating my flat, Vista fired up and went to desktop, I went in the kitchen to grab a drink, came back, and the monitor is on powersaving mode as if it blanked out for the screensaver. Wiggled the mouse, nothing. Hit some keys, nothing. Pressed the power button, nothing. Held the power button down for an eternity - didnt even shut down. No HDD activity, but all fans whirring away and seemingly 'on'.
Spec:
600W OCZ PSU
XFX 260GTX GFX
4x 1GB 633mhz DDR2
Phenom II 945 x 4 CPU
Vista 32 Bit
Now, the only way to shut down my pc was to turn the power off from the PSU. I switched back on. No post screen, nothing on the display. Sat in sleep mode. However, all fans on, DVD-R light gives a flash, HDD spins up, but no HDD light, nothing. Again, only way to turn off was to turn the PSU off.
So I go about taking the components out, cleaning, reseating, even took the CPU out and replaced with my original Athlon x 2. Still nothing.
Anyway, I'm at a loss. Im guessing the motherboard must be fried? Is there anything I can do without having to take it to a specialist to charge me the same money as a new mobo will cost me?

Is your CPU the 95W or 125W version?
I suspect that CPU VRM MOSFET(s) may be fried. None of the 125W AM2/AM2+ were supported and then along comes AM3 and they show support for those 125W CPU's. Doesn't make a bit of sense to me, I've seen it on other similar MB's also. Look at the MOSFET's to the left of the CPU and see if any look overheated or burned.
This is a different MB but is an example of what to look for:

K9AG Neo2 Digital and USB

System specs:
AMD 64 X2 6000 (125w)
K9AG Neo2 Digital (bios 1.5)
2x Kingston 1G DDR2 667
MSI Ge force 7800GT
Western Digital 500GB IDE HD
Windows XP Home SP2
Thermaltake 700w PSU
Please excuse any naivety on my part. I recently purchased the CPU/mainboard mentioned above and am not able to install USB 2.0 from the included CD. All other drivers (ATI installed first) installed with no problem. This was a clean install of Windows XP SP1 with SP2 installed immediately after. BIOS indicates that USB is enabled. I've tried uninstalling the USB drivers with no change after reboot. With that, I'm at the end of my comfort zone for any other proceedings and come to the forum for help. In searching the forums, I found this post https://forum-en.msi.com/index.php?topic=112724.0 which I tried to emulate and failed. I'd appreciate further insight and assistance. I have another question as well. The CPU/board was purchased locally at a point when I didn't have access to review or investigate the products on line. I was told the 6000 125w would work with no problems with the K9AG Neo2 board. Is this the case and am I risking damage to system? Thanks for your time.

The 125w version of AMD X2 cpus should not be used with your motherboard. These cpus overload the power regulation circuit on the motherboard and can cause the motherboard's power regulation circuit to fail. This may be the cause of the USB problem since the USB controller draws power from the motherboard to run any USB devices.
Check this link for supported cpu.
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1241&maincat_no=1&cat2_no=171&cat3_no=#menu
IMHO, exchange your cpu for the 89w version and see if that cures your problem.

K9AG Neo2-DIgital: AMI BIOS v1.7 has no AHCI setting

Hi folks,
I recently upgraded my K9AG Neo2-Digital AMI BIOS from its original version (I don't remember what exactly) to v1.7 (the latest available on the MSI website). Before the upgrade I had three choices for the SATA mode: IDE, ACHI, and RAID. Now the setting is called "RAID Mode" and the only choices are: IDE, RAID.
What happened to the AHCI setting? I've been doing a lot of reading lately, and there doesn't seem to be a shortage of people having problems with AHCI and this board. Perhaps the latest BIOS simply disables it because of issues?
Anyway, it's a bit of a bummer because I finally got the latest Vista x64 AHCI drivers from both Microsoft (msahci.sys) and MSI (ahcix64s.sys) slipstreamed into my Vista setup DVD so I could try to do a repair install and get Vista to work in AHCI mode. I had originally installed it in IDE mode, and thought, hey why not try AHCI (or RAID in the future). Now I can't even choose AHCI mode in the BIOS. The original Vista install DVD wouldn't even load if I enabled AHCI in the BIOS - presumably due to the older msahci.sys drivers not supporting the SB600 at all.
I tried RAID mode, and the RAID BIOS detected my existing Vista drive as 1+0 JBOD, and the Vista install DVD detected the Vista installation on the drive (after loading the ahcix64s.sys driver), but I don't see any Vista repair installation option. This is off topic, but is there even such a thing in Vista? I know XP has a repair install that will fix the OS but leave all your apps and settings in tact.
I get the feeling that Vista and AHCI/RAID were just never meant to work with the SB600 :(
Any thoughts?
-Paul

sharfe, no need to hijack a 2 year old topic. Please start you're own new topic.
>> Please read and comply with the Forum Rules <<
>> Posting Guide <<

Does the K9AG Neo2-Digital supports AMD's virtualization extensions ?

I want to build a home server based on the K9AG Neo2-Digital.
This machine should run several XEN Vitual Hardware Machines.
For this I need a BIOS that supports the AMD's virtualization extensions AMD-V (a.k.a. Pacifica, SVM).
Thanks
Martin

CPU hardware virtualization only got really worthwhile with Nested Pages in Barcelona (and with ESX 3.5)
If not Barcelona then I would not depend the choice of a motherboard based on CPU hardware virtualization support.
Up till Barcelona CPU hardware virtualization is actually slower. It's not. ESX in Workstation shows great impovement WITH AMD-V.
When more budget is available see if there's a Xen compatiblity list like with ESX. And base your choices around that.
BTW Running ESX 3.0.2 on "cheap" HP ML115 (DC Opteron) bought @ebay for about 250Euro.
With 200Euro upgrade to 6GB Kingoston DDR2-800 non-ECC it's running 6VM's including Exchange2007
I ran XenServer yesterday on the ML115 and runs great out of the box
Edit: 2 mofifications

Power but no post or boot

See the config below. It's been working great since I built it several months ago - until last night, that is.
It powers up (fans whirring, LEDs flashing, etc.), but doesn't post, doesn't beep and nothing comes up on the monitor (which stays in standby mode).
I haven't done any overclocking. I tried resetting the CMOS. I tried the 2 512mb RAM chips separately. I tried disabling the DVDRW drives. All connections are secure.
I'd love to at least get to the CMOS, but it won't go there. Any suggestions (including buying a new mobo)? Let me know if you need more info.
Thanks!

I'd try reseating the video card and if that does not work, I'll try another card.
BTW you need to add your power supply voltage & amps to your signature - just like mine. You also need to specify the brand name of your RAM and its voltage. Also include any other information such as overclocking, .., etc.

K9Ag Neo2-Digital--) HDMI doesn't work nor sound!!

Hi there!! I thought I posted a message about 2 hours ago. However, it seems to have disappeared. My apologies if I found the wrong forum for my Motherboard.
I wonder if anyone had any advice about my above mentioned motherboard.
I cleanly installed Windows XP SP3 recently and the audio card won't install, though it does work on another, older windows installation which didn't have the SP packs built in.
The second issue is the dual video inputs don't seem to work. I've tried both the DVI out and the HDMI out to my HD Viewsonic TV.
Any tips? If this is the wrong forum, could you please direct to the right one??
thanks!

Hi there!! I just had an interesting idea and I wonder if this solve the Realtek Audio problem.
As I stated above, i have two XP instalations on one computer in two different partitions. One of them was an older build which i manually upgraded to sp3. On this version the audio installed properly. On the second XP, SP3 pack was built in, however, the realtek audio won't instal, no matter how hard i try.
The idea I have is, is it possible to copy part of the windows files, possibly, the system 32 files and paste them into the Windows folder?
Do you think anything like that might work?
thanks

MOVED: K9AG Neo2-Digital - Vista Cool 'n Quiet Doesn't Work

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=109905.0

Hold fire m8
I'm in the same boat. I have the Neo2 with 3200 Venice and after applying all correct settings it doesn't work. CnQ is not yet working with the Venice or San Diego chips. There should be a new official BIOS update coming out any day that will rectify it, or if you're impatient you could try the 1.9 build 5 (Beta) that enables CnQ to work with Venice chips.
I would personally recommend waiting for the official update though, because you take your MB's life into your own hands with a Beta.
Here is a CnQ FAQ outlining the correct steps to take in setting up CnQ (steps you've already taken!)
C'n'Q FAQ
DBM

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

Macbook wont power on with AC power but Will with Battery

when i try to power on my Macbook it shuts off immediatly if i use AC Power but if i unplug the Ac Cord and use the Battery it does power on
Battery has an X on the display
i took it to the genius bar a few days ago and the tech took off the battery,held down the power button for 30 seconds then re-installed the battery
this corrected the X on the display for ONE DAYthen it came back
any idea what the problem is
and are both of the above things related?

sorry wrong post, please ignore. too many threads with similar issues.
Message was edited by: drupii

I am in China. When I plug in my powerblock i get a green light for 10-15 seconds then it turns orange. It seems to feed power but not charge the battery. i have a message that says the battery is not charging.

I am in China. When I plug in my powerblock i get a green light for 10-15 seconds then it turns orange. It seems to feed power but not charge the battery. i have a message that says the battery is not charging.

Do these
https://support.apple.com/kb/HT3964
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
https://support.apple.com/kb/TS1713
https://support.apple.com/kb/ht1509
could be the power isn't sufficient, use another location
make a note of any results you get and post them

I downloaded adobe digital editions but I cannot authorised my computer, they say I should connect to internet first but I am connected????

please help me thank you!!!
I downloaded adobe digital editions but I cannot authorised my computer, they say I should connect to internet first but I am connected????

Thank you for your help, it is now fix.
Envoyé de mon iPad
Le 2014-11-15 à 15:45, kglad <[email protected]> a écrit :
I downloaded adobe digital editions but I cannot authorised my computer, they say I should connect to internet first but I am connected????
created by kglad in Downloading, Installing, Setting Up - View the full discussion
attaching a screenshot of the exact error message would help, if the link below does not.
Sign in, activation, or connection errors | CS5.5 and later
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6932977#6932977 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6932977#6932977
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

Hi,
Any one have this issue?
HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
This issue was found in my replacement motherboard. the original mother do not have this issue.
The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
Appreciate any one can provide clue for resolving the problem.
I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50)

@wheng
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HT1349 there is power, but the screen just went black

i have a mac pro that has power, but the screen went black. has anyone else had this problem?

Hello Gail,
It sounds like you can hear your Mac start up, but you do not see anything on the screen. I definitely understand your concern with this.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays. I wasn't sure if you were using a Mac Pro or MacBook Pro from your post. If you are using a Mac Pro, follow the steps for external displays, but if you're using a MacBook Pro, follow the steps for internal displays. I recommend reviewing the full article, but this step specifically stands out to me for the issue you described:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the full article here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I successfully installed Adobe Digital Edition but the application will not open

I installed Adobe Digital Edition for Windows on a Windows 7 PC. It successfully installed, but the application will not open. I double click on the icon and it gives the borders, but never opens. I have waited 30 minutes and still nothing.

It is on Windows 8.
From: shreya <[email protected]>
To: Marilyn Kelly <[email protected]>
Sent: Thursday, March 26, 2015 1:06 AM
Subject: I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
I see Adobe Digital Editions on desktop but when I click on it it will not open. I have uninstalled and re-installed Adobe Digital Editions but it still will not work. I used it a few days ago and it worked but won't now.
created by shreya in Adobe Digital Editions - View the full discussionYou are facing this problem on Windows or Mac ? and which version? Please let us know. Thanks If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7351396#7351396 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7351396#7351396 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Digital Editions by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

K9AG Neo2 Digital - power but no post 7750+(BE)

Similar Messages

Maybe you are looking for