[KDE] Failed to properly resume session after tty switch or suspend.

Hello!
I have problem with resuming my X session after i switched console with ctrl+alt+F.., or after wake up from suspend/hibernate. In the first situation i can see my cursor and parts (triangles) of desktop which dynamically changes while moving my mouse. I can control my pc - its just a display issue. In second case are usually some static artefacts, for example affecting conky, but rest of desktop behaves normally. The only way for me to solve it is to change tty once again and kill X server, then it brings me automatically to kdm and then work fine, but it makes suspend/hibernate and changing ttys useless.
Edit: I found this error in /var/log/Xorg.0.log:
[ 13476.840] (EE) systemd-logind: failed to get session: PID 1699 does not belong to any known session
Return of ps -ef:
root 1699 290 3 12:37 tty7 Ss+ 0:20 /usr/bin/Xorg.bin -br -novtswitch -quiet :0 vt7 -nolisten tcp -auth /var/run/xauth/A:0-IWmbl
Versions:
[cr3h@archlinux ~]$ kde4-config -v
Qt: 4.8.6
KDE: 4.14.3
kde4-config: 1.0
[cr3h@archlinux ~]$ X -version
X.Org X Server 1.16.3
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.18.1-1-ARCH x86_64
Current Operating System: Linux archlinux 3.18.2-2-ARCH #1 SMP PREEMPT Fri Jan 9 07:37:51 CET 2015 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=79d42580-4069-42e7-84ce-db999184bf6f rw resume=/dev/sda4
Build Date: 29 December 2014 01:09:58PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[cr3h@archlinux ~]$ lspci | grep VGA
02:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
Last edited by cr3h (2015-01-22 11:56:28)

Solved in another (Hebrew) forum.
pacman -Syu

Similar Messages

Sync session failed to start in iTunes after updated to iOS 7

Sync session failed to start in iTunes after updated to iOS 7

Restart your computer
While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
After you are done doing that, restart your phone.
Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

[Solved]KDE fails to load

I just ran an update a few minutes ago, involving a bunch of kde-related stuff. After the update I noticed I couldn't open kwrite (via the menu), so I tried alt+f2 to open the klauncher. That didn't open either, so I hit reboot (on the menu). Instead of showing the usual reboot dialog, with different options, the screen just went black. So I hit the power button, and booted back up, but starting KDE failed and I was dumped into a terminal. I'm posting this in Firefox running under an X session. Not a ton I can do with that.
I noticed that while shutting down, I get a message seemingly about fam not being found in /etc/rc.d. Could this be the problem? Any ideas on how I can fix this?
Thanks.
Edit: I looked in /etc/rc.d, and fam is most definitely not there. Although now I think of it, I was unable to find and start fam when I first installed kdemod4 and Arch a while ago, so I don't think the missing fam is the problem... installed it via pacman, though, and it starts fine, however I can't start hal now. KDE still won't start, using XFCE for now.
Update: Ended up reinstalling, works fine now.
Last edited by vertimyst (2008-08-17 23:33:16)

Hi,
I have sort of the same problem myself as I did a fresh install of Arch yesterday and went with KDE. I remember not even having a fam daemon so I had to pacman it, even after getting it I used the whole:
/etc/rc.d/fam start
/etc/rc.d/hal start
And while that sort of worked I remember getting some missing message beforehand.
Basically, I am able to get into KDE using:
sudo /etc/rc.d/kdm start
Hope that helps, not sure if its a long term solution or not, I'm very new to Arch/Linux, I don't really like KDE anyways, so I might switch to Gnome but best of luck.

Statement in resumable session 'SYS.SYS_IMPORT_FULL_01.1' was timed out

I am working on Oracle 10.2.0.2 database on Solaris 10.
I am trying to import a schema into the database but the datapump job was hanging due to resumable timeout. Temp tablespace ran out of space.
Alert log
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
Wed Sep 22 07:38:24 2010
statement in resumable session 'SYS.SYS_IMPORT_FULL_01.1' was timed out
Wed Sep 22 08:00:52 2010
alter database tempfile '/u01/oradata/DATA/temp01.dbf' autoextend on next 400M maxsize 16G
Wed Sep 22 08:00:53 2010
Completed: alter database tempfile '/u01/oradata/DATA/temp01.dbf' autoextend on next 400M maxsize 16G
Import log
Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
The status of the job is executing.
Worker 1 Status:
State: EXECUTING
Object Schema: TAINT
Object Name: AALTAINT_IDX0
Object Type: SCHEMA_EXPORT/TABLE/INDEX/INDEX
Completed Objects: 160
Worker Parallelism: 1
Now I have increased the size of the temp file and want the datapump job to continue. Will I be able to force it or should I wait for the datapump job to retry after the timeout period?
Edited by: user11971085 on 22-Sep-2010 00:18

Hi,
1) After resumable timeout , it will be resumed
2) You can use one more option
impdp>help
impdp> start_job jobname
It will resume the paused job
Hope this answers your question
Kind Regards,
Rakesh jayappa

Failed to Open a Session on the Device - scanning from Mac OSX 10.9.3 - M1217nfw

Hello,
I'm running into some issues scanning wirelessly from our HP LaserJet M1217nfw MFP from any Mac running 10.9.3. I've tried to "Reset Printing System" and re-adding the printer with no success. Each time I open either Preview/Printers & Scanners/Image Capture, I receive the following error message: "Failed to Open a Session on the Device." When I add the printer, I do so by selecting the "+" icon, and selecting "Add Printer or Scanner..." selecting the printer from the list listed via bonjour, and "Select the software" but my model printer is not listed. The closest printer listed is HP LaserJet Professional M1210nf MPF Series, but it doesn't work. Any ideas here?
This question was solved.
View Solution.

Welcome to the HP Forums jpuebla,
I see by your post that you are having issues scanning, you aren't able find the drivers to add the printer.
I can help you with this issue.
The drivers for Maverick are the Apple Update drivers.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign, then select the printer from the list and click on the Add button.
(make sure it shows the printer name beside Use, not the Airprint driver)
You might have to run the Apple Updates again with USB cable connected to get the drivers installed.
Then try and add the bonjour printer again.
Test the printer again.
If you are having network issues, then add the printer through the IPProtocal.
After clicking the + button, select the IP icon across the top, type in the printer's IP address, select jet direct below and then Apply.
Test the printer.
I have seen the HP Printer Drivers v.2.16.1 for OS X drivers work successfully, if the issue persists.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Auto-Start Resumable Session upon TTA restart

We use TTA on our administrative servers and we were wondering if there was
a way to start a resumable application session we defined in the object
manager upon restarting the Tarantella server.
Basically we have a monitoring utility that our admins can view using TTA by
logging into our "Monitor User's" (monuser) webtop. It takes a while for
the app to start up and it also graphs some recent historical data, like
"Windows Task Manager/Performance Tab".
The Ideal Sequence of events:
Tarantella Server gets started (or restarted)
monuser's "monitor_app" gets started in the background somewhere and then
goes into TTA's Object "Suspended" mode
Any Admin user logs in as "monuser" and click's on the resumable session
Admin users can go in and view the suspended monitor_app session
Any ideas?
Cyrus

Rob wrote:
CM wrote:
We use TTA on our administrative servers and we were wondering if there was
a way to start a resumable application session we defined in the object
manager upon restarting the Tarantella server.
Basically we have a monitoring utility that our admins can view using TTA by
logging into our "Monitor User's" (monuser) webtop. It takes a while for
the app to start up and it also graphs some recent historical data, like
"Windows Task Manager/Performance Tab".
The Ideal Sequence of events:
Tarantella Server gets started (or restarted)
monuser's "monitor_app" gets started in the background somewhere and then
goes into TTA's Object "Suspended" mode
Any Admin user logs in as "monuser" and click's on the resumable session
Admin users can go in and view the suspended monitor_app session
Any ideas?
Cyrus
Cyrus,
As fas as I know, I don't think you can accomplish the above by just
using Tarantella alone.
One idea could be the following (never tried it personally); after the
Tarantella services get restarted, you could write a script which fires
up the Unix/Linux native client (which can be customized via command
line parameters) as to log in using a predetermined account (eg,
monuser) and start your application.
After a certain amount of time, assuming the application is resumable
you could "kill" the script (and the native client itself) so that
Tarantella can suspend your application.
Thus making, as soon as your admins log in using the monuser account,
they __should__ have "presto" access to the suspended application.
More info about customizing the Unix/Linux native client here:
http://docs.sun.com/source/819-4309-10/en-us/base/indepth/unix_nc_customising.html
Sorry, this is the right URL:
http://docs.sun.com/source/819-4309-10/en-us/base/indepth/nc_running_cmdline.html
Roberto Zini - r.zini<@AT@>strhold.it
"Has anybody around here seen an aircraft carrier?"
(Pete "Maverick" Mitchell - Top Gun)

How do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?

Hello Kwastfamily,
It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Delete session after error 023 and WP has reached abap/heaplimit = 40000000

Hello,
I had upgraded my system's kernel to 7.21 401 last weekend and started getting below errors.
     "Delete session after error 023" and "WP has reached abap/heaplimit = 40000000"
When I change the abap/heaplimit parameter to 6000000000 program runs without error.
This parameter value is out of max value of this parameter.
I donot want to give the parameter over max allowed value.
I also changed dbsl patch to 7.21 418 but no solution.
I searched through sap notes and scn but could not find an answer to my problem.
What could be the relation between kernel upgrade and this parameter?
Why the program was working with Kernel 7.21 316 and not working with 7.21 401?
I inserted SM21 and developer trace file below.
Can you help about the issue, please?
Thanks and Regards,
Yuksel AKCINAR
SM21:
     11:56:52 DIA 010 200 USER1 TX01          R4 7 Delete session 004 after error 023
dev_wx:
L Fri Mar 13 11:52:31 2015
L EVTSDL: Begin of FORM PROCESS_EVENT_TRIGGERED_JOBS
L EVTSDL:    Event raised: SAP_END_OF_JOB
L EVTSDL:    Event parameters: SLCA_LCK_SYNCHOWNERS            10523100
L EVTSDL:    Begin of FORM SELECT_EVENT_TRIGGERED_JOBS
L EVTSDL:      Eventhistory > There are no active profiles of criteria type 'EVTHIS'
L EVTSDL:    End of FORM SELECT_EVENT_TRIGGERED_JOBS
L EVTSDL: End of FORM PROCESS_EVENT_TRIGGERED_JOBS
L TIMESDL: CLEANUP_MUTEX try to grasp for server:
L TIMESDL: arq01_ARQ_10
L TIMESDL: CLEANUP_MUTEX not grasped (is busy)
A
A Fri Mar 13 11:56:35 2015
A WP has reached abap/heaplimit = 40000000 bytes
A
A Fri Mar 13 11:56:39 2015
A SelMemClass: heap quota (DIA) exceeded 2000000000 2000030480
A
A Fri Mar 13 11:56:40 2015
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE entered.
A ** RABAX: level LEV_RX_HOTSPOT_TRACE completed.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered.
A ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
C Call to DbSlRollback96 while DBIF already active in DbSlExeRead96
B ***LOG BZY=> unexpected return code 1 calling DbSlRollback [dbcon        3820]
B ***LOG BYJ=> database function ROLLBACK for connection R/3 failed [dbcon        3823]
B *** ERROR => DISTRIBUTED_TA_FAILED:
[dbcon.c      2029]
B {root-id=0050569300301EE4B2AC40086FE743BF}_{conn-id=00000000000000000000000000000000}_0
B 00: name=R/3, con_id=000000000, state=ACTIVE      , tx=NO , bc=NO , hc=NO , perm=YES, reco=NO , info=NO ,
B      timeout=000, con_max=255, con_opt=255, occ=NO , prog=
M ***LOG R39=> ThIRollBack, db_rollback ( 016384) [thxxhead.c   14956]
M in_ThErrHandle: 1
M *** ERROR => ThIRollBack: db_rollback (step 4, th_errno 18, action 2, level 1) [thxxhead.c   11560]
M {root-id=0050569300301EE4B2AC40086FE743BF}_{conn-id=00000000000000000000000000000000}_0

Hi Yuksel ,
From the trace file it seems it is a parallel processing Jobs . Has anything changed ( In terms of number of parallel background work process ) in this Job .
If this relates to only one job dont think this increased memory could be because of the kernel patching .
The only thing i could think of is the following ( 1713986 - Installation of kernel 721 (EXT) ) - The note is valid for 721 als
5.6 Dynamic work processes (NetWeaver 7.00/7.01)
The 720 and 721 kernel versions support the dynamic increase of the number of work processes at runtime. However, this function is not fully compatible with NW 7.00 and NW 7.01. To prevent errors from occurring, deactivate it by setting the following parameters:
rdisp/wp_no_restricted = 0
rdisp/configurable_wp_no = 0
rdisp/dynamic_wp_check = FALSE
rdisp/wp_max_no = Sum of:( rdisp/wp_no_dia + rdisp/wp_no_vb2 + rdisp/wp_no_btc + rdisp/wp_no_vb + rdisp/wp_no_spo + rdisp/wp_no_enq ).
Mind that rdisp/wp_max_no has the default value DEFAULT, which will add two unwanted dynamic processes if not set the number of configured, classical wp types.
Check the parameters and try again after a restart .
Believe have seen in many projects functional consultants complaining the issue is after the patch upgrade . Does this fall in that category
Thanks ,
Manu

AuthD failed to get auth session

I have a new installation of portal, but something is not working properly (probably our changes to authentication service schemas and organization-level changes).
The message ("AuthD failed to get auth session") shows up in the amAuth log:
ERROR: AuthD init()
com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
at com.sun.identity.authentication.service.AuthD.initAuthSessions(AuthD.java:617)
at com.sun.identity.authentication.service.AuthD.<init>(AuthD.java:203)
at com.sun.identity.authentication.service.AuthD.getAuth(AuthD.java:368)
at com.sun.identity.authentication.service.AuthUtils.<init>(AuthUtils.java:101)
at com.sun.identity.authentication.UI.AuthViewBeanBase.<init>(AuthViewBeanBase.java:67)
at com.sun.identity.authentication.UI.AuthExceptionViewBean.<init>(AuthExceptionViewBean.java:61)

There are many reasons to get this error, following may be one of them
Scenario 1: Your directory server is not running
Scenario 2: The naming service not initialized because it could not find the server entry in the platform list, especially if you are running SSL enabled server makes sure you have added the correcsoponding platfrom entry with correct protocol. IF you have forgot to add , you can add it from Directory adminconsole
Scenario 3: In a multiserver installation sharing the same DS, you need to make sure you supply the correct encryption key of the server 1 while installing the second server. To quickly check both are matching check the serverconfig.xml of both servers should be identical
Scenario 4: You have installed the Identity against existing provisoned DIT and selected NO for question 'You want to load IS comapliant DIT' during isntallation. In this case you need to go through the postinstallation steps before accessing the adminconsole

No Remote session after disconnect

We have the problem that AFTER a disconnect of a remote session we get the message:
"Failed to connect to server (DNShostName~50)" - actually in German it reads "Fehler beim Herstellen einer Verbindung mit dem Server (DNShostName~50)"
The initial remote session works, only if it breaks a reconnect is only possible after a reboot of the remote host. In addition the client does not lock the screen if the connection is lost.
I noticed that the listening IP stack does not listen any longer. Before the problem, when doing a "netstat -a -b" I can see 2 entries for nzrWinVNC.exe:
Proto Lokale Adresse Remoteadresse Status
TCP 0.0.0.0:5950 LWS71127:0 ABHREN
[nzrWinVNC.exe]
TCP [::]:5950 LWS71127:0 ABHREN
[nzrWinVNC.exe]
But both listening ports are gone after I have lost the remote session.
We have ZCM 10.3.3 on Win7 64bit with an internal CA and MS-SQL DB. Problem exists at least since 10.3.0
Most important policy settings:
Remote Control Settings
x Allow managed device to be controlled remotely
x Ask permission from user on managed device before starting Remote Control
x Give visible signal to the user on the managed device during Remote Control
_ Give audible beep to the user on the managed device every seconds during Remote Control
x Allow managed device screen to be blanked during Remote Control
x Allow managed device mouse and keyboard to be locked during Remote Control
x Allow screen saver to be automatically unlocked during Remote Control
x Automatically terminate Remote Control session after inactivity of "30" minutes
Password Authentication
x Enable password based authentication
Minimum password length "7"
Password type
_ Session
x Persistent
x Allow user to override default passwords on managed device
Default ZENworks password:
_ Clear password (if any)
x Set password
Default VNC password:
_ Clear password (if any)
x Set password (password should not exceed 8 characters)
Intruder Detection
x Enable Intruder Detection
Suspend accepting connections after "5" successive invalid attempts
Automatically start accepting connections after "10" minutes
Session security
_ Enable Session Encryption
x Allow connection when Remote Management Console does not have SSL certificate
Allow up to "2" levels in Viewer certificate chain
Abnormal termination
x Upon abnormal termination of remote sessions, "Lock Device"

BachmannK,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

VBoxManage: error: Failed to create a session object!

When I run
vagrant up
I get the following output:
Bringing machine 'default' up with 'virtualbox' provider...
There was an error while executing `VBoxManage`, a CLI used by Vagrant
for controlling VirtualBox. The command and stderr is shown below.
Command: ["list", "hostonlyifs"]
Stderr: VBoxManage: error: Failed to create a session object!
VBoxManage: error: Code NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154) - Class not registered (extended info not available)
VBoxManage: error: Most likely, the VirtualBox COM server is not running or failed to start.
I tried directly running
VBoxManage list
and I get this output:
VBoxManage: error: Failed to create a session object!
VBoxManage: error: Code NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154) - Class not registered (extended info not available)
VBoxManage: error: Most likely, the VirtualBox COM server is not running or failed to start.
VirtualBox (and vagrant) were both working earlier today, but I updated a bunch of packages via
yaourt -Syua
which I suspect is what caused the problem. Here's (what I think are) the relevant part of
/var/logs/pacman.log
[2013-10-22 15:53] [PACMAN] starting full system upgrade
[2013-10-22 15:55] [PACMAN] upgraded libpng (1.6.5-1 -> 1.6.6-1)
[2013-10-22 15:55] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2013-10-22 15:55] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Starting build: 3.11.6-1-ARCH
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Starting build: 3.11.6-1-ARCH
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2013-10-22 15:55] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-10-22 15:55] [ALPM-SCRIPTLET] ==> Image generation successful
[2013-10-22 15:55] [PACMAN] upgraded linux (3.11.5-1 -> 3.11.6-1)
[2013-10-22 15:56] [ALPM] warning: /boot/syslinux/syslinux.cfg installed as /boot/syslinux/syslinux.cfg.pacnew
[2013-10-22 15:56] [ALPM-SCRIPTLET] Syslinux BIOS update successful
[2013-10-22 15:56] [ALPM-SCRIPTLET] If you used syslinux-install_update to install syslinux:
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> If you want to use syslinux with menu and all modules please rerun
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> # /usr/bin/syslinux-install_update -i -a -m
[2013-10-22 15:56] [ALPM-SCRIPTLET]
[2013-10-22 15:56] [ALPM-SCRIPTLET] If you manually installed syslinux:
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> Please copy or symlink all .c32 modules to your /boot/syslinux directory.
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> If (/ and /boot on seperate fs):
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> # cp /usr/lib/syslinux/bios/*.c32 /boot/syslinux
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> If (/ and /boot on same fs):
[2013-10-22 15:56] [ALPM-SCRIPTLET] ==> # ln -s /usr/lib/syslinux/bios/*.c32 /boot/syslinux
[2013-10-22 15:56] [PACMAN] upgraded syslinux (4.07-1 -> 6.02-3)
[2013-10-22 15:56] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2013-10-22 15:56] [PACMAN] upgraded virtualbox-host-modules (4.2.18-7 -> 4.3.0-1)
[2013-10-22 15:56] [PACMAN] upgraded virtualbox (4.2.18-2 -> 4.3.0-1)
After merging in the changes from
/boot/syslinux/syslinux.cfg.pacnew
, I ran
/usr/bin/syslinux-install_update -i -a -m
, and then rebooted the system, and that's when I first discovered VirtualBox was no longer working.
I tried
sudo modprobe vboxdrv
sudo modprobe vboxnetadp
sudo modprobe vboxnetflt
and
sudo modprobe vobxpci
based on what I saw from https://bbs.archlinux.org/viewtopic.php?id=130317
I tried
chown root.root /tmp; chmod ug-s /tmp; chmod 1777 /tmp
based on what I saw from https://www.virtualbox.org/ticket/2335#comment:4
The output of
/bin/ls -ld /tmp
is
drwxrwxrwt 4 root root 80 Oct 22 16:46 /tmp
Not sure what to try next.
Last edited by Nebu (2013-10-22 21:33:35)

I also can confirm the same issue as with previous posters, tried all stuff found on the net that seems related to this issue.
Nothing so far as solved it for me, I also had to downgrade to 4.2.18. Not optimal but atleasat i can work until this has been sorted out.
Last edited by loxan (2013-10-24 09:02:19)

OCZ Vertex 2 fails to fully resume from suspend to RAM

I have installed an OCZ Vertex 2 60GB SSD in my laptop and I cannot resume normally from S3 using pm-suspend or any other method. It looks like / isn't remounting, however it does seem that home is remounting.
I have flashed the firmware to the latest. I tested suspend after a base install, with only acpi and hal (pm-utils being a dep for hal) and it failed.
Here is fstab, mtab, and fdisk -l. If any other information is needed let me know.
Disk /dev/sda: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xb8372fcd
Device Boot Start End Blocks Id System
/dev/sda1 2048 206847 102400 83 Linux
/dev/sda2 206848 21178367 10485760 83 Linux
/dev/sda3 21178368 117231407 48026520 83 Linux
proc /proc proc rw,relatime
sys /sys sysfs rw,relatime
udev /dev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=502347,mode=755
/dev/disk/by-uuid/fd40337d-ed8a-4e76-be3f-aa09f5558998 / ext4 rw,noatime,barrier=1,data=ordered,discard
devpts /dev/pts devpts rw 0 0
shm /dev/shm tmpfs rw,nosuid,nodev 0 0
/dev/sda3 /home ext4 rw,noatime,discard 0 0
/dev/sda1 /boot ext2 rw 0 0
none /tmp tmpfs rw,nosuid,nodev,noatime,size=1000M,mode=1777 0 0
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=8f046367-0eec-410f-b3b5-0e298e065c5e /home ext4 defaults,noatime,discard 0 1
UUID=a6f6aa9a-e5d8-4763-ad75-0b0b6c549929 /boot ext2 defaults 0 1
UUID=fd40337d-ed8a-4e76-be3f-aa09f5558998 / ext4 defaults,noatime,discard 0 1
none /tmp tmpfs nodev,nosuid,noatime,size=1000M,mode=1777 0 0
Here are some errors after suspend:
http://img180.imageshack.us/f/fserror.jpg/
http://yfrog.com/izfserror2j
I've also been advised to try enter S1, however I'm not sure how to do that since power states don't seem to work like this anymore (since kernel 2.6):
#echo 1 > sleep
I'm very frustrated at this point and I will be extremely gracious for any advice on this problem

I just successfully suspended to RAM. I was redirecting the log file to text file to make sure it kept it.....here it is. I'm going to check it out further to see if a package update fixed it, or if it was simply dumb luck.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Mon Nov 1 19:35:30 CDT 2010: performing suspend
Initial commandline parameters:
Thu Nov 4 00:54:33 CDT 2010: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux l33tpc 2.6.36-ARCH #1 SMP PREEMPT Sun Oct 31 09:29:11 CET 2010 x86_64 Genuine Intel(R) CPU U7300 @ 1.30GHz GenuineIntel GNU/Linux
Module Size Used by
cryptd 6262 0
aes_x86_64 7412 1
aes_generic 26170 1 aes_x86_64
ipv6 281961 14
ext2 63599 1
usb_storage 42540 0
uvcvideo 61404 0
videodev 64318 1 uvcvideo
v4l1_compat 15578 2 uvcvideo,videodev
v4l2_compat_ioctl32 10212 1 videodev
arc4 1378 2
ecb 2041 2
snd_hda_codec_intelhdmi 10645 1
snd_hda_codec_realtek 275631 1
i915 320893 2
snd_seq_dummy 1431 0
ath9k 79976 0
snd_seq_oss 28760 0
joydev 10055 0
snd_seq_midi_event 5436 1 snd_seq_oss
snd_hda_intel 22253 0
snd_seq 50082 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5297 3 snd_seq_dummy,snd_seq_oss,snd_seq
uhci_hcd 21926 0
snd_hda_codec 79192 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
mac80211 195924 1 ath9k
drm_kms_helper 25963 1 i915
snd_pcm_oss 39157 0
snd_mixer_oss 17106 1 snd_pcm_oss
ath9k_common 3496 1 ath9k
snd_hwdep 6110 1 snd_hda_codec
drm 175314 2 i915,drm_kms_helper
ath9k_hw 289341 2 ath9k,ath9k_common
snd_pcm 71921 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ath 8822 2 ath9k,ath9k_hw
ehci_hcd 36860 0
i2c_algo_bit 4911 1 i915
asus_laptop 14243 0
i2c_core 18726 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
sparse_keymap 2563 1 asus_laptop
snd_timer 19265 2 snd_seq,snd_pcm
ac 3105 0
vboxdrv 1740411 0
battery 10039 0
cfg80211 142886 3 ath9k,mac80211,ath
snd 57562 11 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_hda_intel,snd_seq_device,snd_pcm_oss,snd_hda_codec,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
atl1c 31532 0
video 19305 1 i915
iTCO_wdt 10669 0
sg 25652 0
processor 25936 2
rfkill 15882 2 asus_laptop,cfg80211
soundcore 5969 1 snd
psmouse 52592 0
output 1940 1 video
iTCO_vendor_support 1801 1 iTCO_wdt
thermal 12242 0
button 4834 1 i915
usbcore 137506 5 usb_storage,uvcvideo,uhci_hcd,ehci_hcd
evdev 8519 7
serio_raw 4486 0
intel_agp 29427 2 i915
led_class 2331 2 ath9k,asus_laptop
pcspkr 1819 0
snd_page_alloc 7249 2 snd_hda_intel,snd_pcm
ext4 313574 2
mbcache 5722 2 ext2,ext4
jbd2 69002 1 ext4
crc16 1297 1 ext4
sd_mod 25824 4
ahci 20353 3
libahci 17886 1 ahci
libata 156316 2 ahci,libahci
scsi_mod 124859 4 usb_storage,sg,sd_mod,libata
total used free shared buffers cached
Mem: 4020904 219844 3801060 0 22892 53336
-/+ buffers/cache: 143616 3877288
Swap: 0 0 0
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Done.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd suspend suspend:
/usr/lib/pm-utils/sleep.d/91wicd suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Nov 4 00:54:34 CDT 2010: performing suspend
Thu Nov 4 00:57:50 CDT 2010: Awake.
Thu Nov 4 00:57:50 CDT 2010: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/91wicd resume suspend:
/usr/lib/pm-utils/sleep.d/91wicd resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Done.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg resume suspend:
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Thu Nov 4 00:57:52 CDT 2010: Finished.
It failed again. I have compared the logs and the last entry is :
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Nov 4 01:24:45 CDT 2010: performing suspend
Last edited by DarksideEE7 (2010-11-04 07:29:06)

Failed to open the connection after changing the connection in CMC

Hi
Below are our environment details:
BOXI 3.1 SP3
Solaris Sparc 10
Crystal Reports 2008 Sp3
Weblogic 11g
Our team is facing the problem as described below:
We have created Crystal Reports using JDBC connection and it works fine
in an environment(SIT).
When we migrate these reports to the another environment(UAT) we get
the error "Failed to open the connection"
After migrating we indeed change the connection to Custom Database
Login Information in CMC.
So to troubleshoot we installed Crystal Reports in UAT environment and
had to perform Set DataLocation after which
the reports starting working fine.
Now when we are migrating reports to Production we have the same issue.
We cannot install Crystal Reports on Production this time and hence we
are stuck.
Please let us know if any known workaround or solution for the same.
Thanks
Kamal
Edited by: Kamalaksha Shetty on Nov 15, 2011 4:18 AM

Hi Meenal,
I am not 100% sure I understood the workaround of having Crystal Designer on the server. Can you connect from UAT designer to production and perform the same operation?
Check this KBA that describes this problem and a solution:
https://service.sap.com/sap/support/notes/1445067
Regards,
Julian

I downloaded Firefox 4 and now Firefox doesn't offer to restore my session after I've rebooted. I really liked that feature of Firefox. How do I get it back?

I was happy with Firefox as it was. I had the latest version and it worked perfectly. Then I was notified by Firefox that I should update to Firefox 4. If I'd known it would wipe out my cookies and would not include my "restore session" button that I liked so much, I would not have downloaded Firefox 4. It doesn't offer to restore my browsing session after I reboot and I can't find a way to tell it to do that. Please fix this ASAP and tell me how to make it work on my computer! Thanks.

'''rweeks''':
One of the changes in Firefox 4: '''''by default''''' Firefox 4 does not display the "Save Tabs and Exit" warning message when closing multiple tabs, but it can be turned back on by changing some preferences.
*<u>Saving tabs was not removed from Firefox 4</u>, but it works a bit differently.
**By default, Firefox 4 will not ask to save tabs, but instead it will always save your tabs on exit. You can restore them next time by choosing "Restore Previous Session" from the History menu, or pressing the restore button on Firefox's default home page.
**''<u>Note: This was a decision by the developers. On this forum, we are all '''uncompensated volunteers''' here to help other users. The developes/employees of Mozilla/Firefox rarely, if ever visit here.</u>''
Also make sure you do not clear "Browsing History" when using Clear Recent History:
*https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
To display the "Save Tabs and Exit" message when closing multiple tabs, you can do the following:
#Type '''''about:config''''' in the URL/Location/Address bar and press the Enter key
#Accept the warning message (promise to be careful)
#The preferences page/list will open
#Filter = '''''browser.tabs.warnOnClose'''''
#If its value is set to false, double-click on it (in the lower panel) to toggle its value to true
#Repeat steps 4 and 5 for these following 3 preferences also:
#*'''''browser.warnOnQuit'''''
#*'''''browser.warnOnRestart'''''
#*'''''browser.showQuitWarning'''''
#**Note: last pref is new in Firefox 4b12, may need to add (boolean)
#**Info/Instruction for using '''''about:config''''': http://kb.mozillazine.org/About:config
#See:
#*https://support.mozilla.com/en-US/questions/785169
#*http://forums.mozillazine.org/viewtopic.php?f=23&t=2105039&p=10434467&sid=fd2a35945bb2c633687f7b50d8c53989
#*http://blog.zpao.com/post/3174360617/about-that-quit-dialog

I can't scan with my HP Photosmart Plus B210a, I get a "Failed to open a session on the device" message everytime I attempt to scan to the computer. I'm using the most current driver off the HP website for Mac OSX Lion 10.7

I can't scan to my computer with my HP Photosmart Plus B2010a, I get a "Failed to open a session on the device" message everytime. I'm using the most current driver for OS X Lion 10.7 off the HP website.

I get the same "Failed to open a session on the device" message with Apple Image Capture as I do with the HP Utility software.

[KDE] Failed to properly resume session after tty switch or suspend.

Similar Messages

Maybe you are looking for