KDM ignoring locales
Hello.
I have problem with locales after switching from manual loggin and starting X to KDM. It simply ignores exported locales from /etc/profile
and sets all to POSIX. In other words I have in /etc/profile:
export LANG="pl_PL.utf8"
export LC_CTYPE="pl_PL.utf8"
export LC_NUMERIC="pl_PL.utf8"
export LC_TIME="en_GB.utf8"
export LC_COLLATE="pl_PL.utf8"
export LC_MONETARY="pl_PL.utf8"
export LC_MESSAGES="en_GB.utf8"
export LC_PAPER="pl_PL.utf8"
export LC_NAME="pl_PL.utf8"
export LC_ADDRESS="pl_PL.utf8"
export LC_TELEPHONE="pl_PL.utf8"
export LC_MEASUREMENT="pl_PL.utf8"
export LC_IDENTIFICATION="pl_PL.utf8"
unset LC_ALL
and I end up with:
[zergu]> locale
LANG=
LC_CTYPE="POSIX"
LC_NUMERIC="POSIX"
LC_TIME="POSIX"
LC_COLLATE="POSIX"
LC_MONETARY="POSIX"
LC_MESSAGES="POSIX"
LC_PAPER="POSIX"
LC_NAME="POSIX"
LC_ADDRESS="POSIX"
LC_TELEPHONE="POSIX"
LC_MEASUREMENT="POSIX"
LC_IDENTIFICATION="POSIX"
LC_ALL=
I know I can add this exports in some-kde/kdm-file, but it changes every KDE update so it is not a good solution. Any ideas?
KDE locale settings
In .kde/share/config/kdeglobals
[Locale]
Country=in
Language=hi
have per lang files & link runtime.
taken from
http://www.indlinux.org/wiki/index.php/RangoliDevLog
there is settings for locale in
~.kde/share/config/kdeglobals
Similar Messages
-
System ignores locale/language setting [solved?]
Hi
I updated my system a few days ago and since then all gtk2/3 applications ignores language settings. I have set correct locale in /etc/locale.conf, /etc/locale.gen (I haven't changed it since installation), locale command also returns correct values. Even if I force locale from command line (by changing LANG or LC_ALL), apps are still in english.
When the problem appears I had Cinnamon desktop, but i tried also Gnome and Kde - same effect (in Kde problem affects gtk apps), I also tried to change login manager (lxdm, lightdm, gdm, kdm), also without positive result. Clearing user config also doesn't help. Any ideas?
Thanks in advance.
UPDATE: It seems whole system ignores locale (in kde I just can manually select custom locale and then it works in kde/qt apps), including console apps (I just didn't notice that before). Strange thing is that Thunderbird has also correct language settings although it is not kde/qt app (in contrast to e.g firefox, which even ignores general.useragent.locale variable).
Last edited by Noctivivans (2013-09-16 23:24:36)locale-gen
Generating locales...
pl_PL.UTF-8... done
Generation complete.
locale
LANG=pl_PL.UTF8
LC_CTYPE="pl_PL.UTF8"
LC_NUMERIC="pl_PL.UTF8"
LC_TIME="pl_PL.UTF8"
LC_COLLATE="pl_PL.UTF8"
LC_MONETARY="pl_PL.UTF8"
LC_MESSAGES="pl_PL.UTF8"
LC_PAPER="pl_PL.UTF8"
LC_NAME="pl_PL.UTF8"
LC_ADDRESS="pl_PL.UTF8"
LC_TELEPHONE="pl_PL.UTF8"
LC_MEASUREMENT="pl_PL.UTF8"
LC_IDENTIFICATION="pl_PL.UTF8"
LC_ALL=
locale -a
C
pl_PL.utf8
POSIX
I tried e.g. invoke
LANG=pl_PL.UTF8 galculator
from command line.
Last edited by Noctivivans (2013-09-15 23:00:47) -
hi to everybody,
I have a very annoying problem:
setting up LANG via /etc/locale.conf (because I want system-wide configuration) is ignored
while setting up via ~/.bashrc works ...
this is what I get, without
export LANG=en_GB.UTF-8
in the ~/.bashrc, but with
LANG="en_GB.UTF-8"
in my /etc/locale.conf
[mattia@arch-dekstop ~]$ locale -a
C
POSIX
en_GB.utf8
[mattia@arch-dekstop ~]$ locale
LANG=
LC_CTYPE="POSIX"
LC_NUMERIC="POSIX"
LC_TIME="POSIX"
LC_COLLATE="POSIX"
LC_MONETARY="POSIX"
LC_MESSAGES="POSIX"
LC_PAPER="POSIX"
LC_NAME="POSIX"
LC_ADDRESS="POSIX"
LC_TELEPHONE="POSIX"
LC_MEASUREMENT="POSIX"
LC_IDENTIFICATION="POSIX"
LC_ALL=
instead with it in my ~/.bashrc, I get:
[mattia@arch-dekstop ~]$ locale -a
C
en_GB.utf8
POSIX
[mattia@arch-dekstop ~]$ locale
LANG=en_GB.UTF-8
LC_CTYPE="en_GB.UTF-8"
LC_NUMERIC="en_GB.UTF-8"
LC_TIME="en_GB.UTF-8"
LC_COLLATE="en_GB.UTF-8"
LC_MONETARY="en_GB.UTF-8"
LC_MESSAGES="en_GB.UTF-8"
LC_PAPER="en_GB.UTF-8"
LC_NAME="en_GB.UTF-8"
LC_ADDRESS="en_GB.UTF-8"
LC_TELEPHONE="en_GB.UTF-8"
LC_MEASUREMENT="en_GB.UTF-8"
LC_IDENTIFICATION="en_GB.UTF-8"
LC_ALL=I found two similar threads:
https://bbs.archlinux.org/viewtopic.php … 1#p1252841
https://bbs.archlinux.org/viewtopic.php … 5#p1153155
Both blame incorrect sourcing /etc/profile
What's the output of 'localectl list-locales' and 'localectl status'? -
Encfs ignoring locale settings?
During the process of creating the root directory and the related mount point through encfs in a non-English environment, it seems the program is ignoring the locale when creating these.
That is, when the program detects that neither the former nor the latter do exist it asks the user to create them. But despite featuring the related options (y,n) in the locale set (s,n) as expected the only working options are still (y,n).
In the end the program aborts when the locale set is used.
Any non-English user has encountered this problem? It would help in case a bug report is needed to be filled. Thanks in advance.Hi Jiri,
Thanks for that speedy tip - that has solved it for Chrome.
I followed a similar path to get it fixed for Firefox - Settings / Content / Languages / add English/Australia [en-au] / Move Up to top spot.
Mike -
Spamassassin Ignores Local Host Aliases?
wacondatrader.com is the primary domain for my server. I also have local host aliases for beloit-kansas.com, kvsvradio.com and plainstrader.com. My ISP has pointed his DNS records to my server and my user account "joe" receives email to all of these domains, as do all of my user accounts setup to use mail services.
I am running MacOS X 10.4.4 Server (just upgraded from 10.3.9).
I have Spamassassin and ClamAV running. Junk mail is being scored and filtered, but for wacondatrader.com ONLY. For email sent to any of the other domains, I am not getting any X-SPAM headers in the email to show that Spamassassin has been there. However, I am getting X-VIRUS headers on email to all of the domains. What do I have to do to get my Server's Spamassassin to process email for all of the domains, and not just the primary one?If above fix works, none Did you try?
If not, the output of postconf -n would be a start.
Plus the settings you chose for content-filtering
(amavisd.conf is to big to post)
Also, did you have spamassassin on your Panther
install already or only since you updated to Tiger?
I tried your suggestion, but no success. Here is what I wrote on the MacOS X Server mailing list:
I have wacondatrader.com setup as my primary mail server in the general Mail Services settings pane. I also have several other domains that resolve to my server that I have setup in the Virtual Host Aliases in the Advanced Settings/Hosting panes. I recently upgraded from Server 10.3.9 to Server 10.4.4 and I did NOT have an existing Spamassassin/ClamAV installation. What is there is what the 10.4 installer placed there.
Is it the default install behavior for only the default domain to be tagged with the X-SPAM tags? I have in the amavisd log, compared an email to the default domain and one to a virtual hosted alias domain, and the log shows that amavis is scanning both for viruses (the X-Virus tags show up in all emails), and it even shows that all emails are being scanned for spam. The ONLY difference is that the log entry that says "SPAM-TAG . . ." is missing from the virtual host alias domains. The virtual host aliases domains even show that a hit count is being generated, so it looks like everything is being processed except the part that adds the spam tag headers to the email. The default domain emails are the only one that the spam tag headers are added to.
Do I need to assume that I need to modify the amavisd.conf file some how, or should Spamassassin be expected to scan the default domain and virtual host aliases in a default Tiger server install?
I tried the following advice from the Server discussions board at Apple's support area of their website (and also from similar instructions from this mailing list from about a month ago, that I found by searching the archives):
In a text editor open /etc/amavisd.conf
Search for the section that reads:
@localdomainsacl = ( ".$mydomain" );
below it add this line:
@localdomainsmaps = ( 1 );
Save.
Stop and Start Mail Services
I logged into my server locally with the root account, followed the above instructions, opened amavisd.conf in TextEdit, but the desired change did not happen.
Joe -
I have a server running SSRS 2012 SP2, in Native / Report Manager mode. The server, reports, desktop etc are all set to en-AU.
Using IE, date parameters show as expected in DD/MM/YYYY format. However using Chrome or Firefox, they show in US format MM/DD/YYYY.
Does anyone know how to fix this?Hi Jiri,
Thanks for that speedy tip - that has solved it for Chrome.
I followed a similar path to get it fixed for Firefox - Settings / Content / Languages / add English/Australia [en-au] / Move Up to top spot.
Mike -
How to ignore browser 's local setting ?
I use ADF to implement JSP Application ?
I am in Thailand .
Thai year = english year + 543 .
ADF display date according to locale that is set in browser .
I want to ignore locale setting in browser and always use Locale.ENGLISH
What should I do ?
and another question ?
if I customize ADF to display in THAI year by customize setter and getter method in EntityImpl . Can I know what is locale that is set in client 's browser in those setter and getter method , because ADF dose not pass request object to EntityImpl ?
thanks in advanceYou can change ADF Model tier in the application Module :
getSession().setLocale(Locale.ENGLISH);
The default value of the locale is the JVM Locale
Don't code view problematic in EntityImpl. Entity are only for binding ViewObject attributes and persistence tier. you can code it in viewRow classes (you can generate it checking ¨the check box in the java menu editing the viewObject.
Regards
Rafael.
rrimbert -
How to use different (not local) user for NTLM auth in Authenticator?
Hi All,
I use custom authenticator to provide user / passwords to connect to .NET Web Services. I overloaded function getPasswordAuthentication() that returns right user / password combination for the requested URL. It all works perfectly for many kinds of HTTP connections: basic, ntlm, ntlm-v2, through proxy, ssl, etc.
My problem is that during NTLM authentication from Windows computers JVM uses credentials of the currently logged in domain user instead of calling Authenticator to get other user / password provided by the user. In case when local user credentials fail to authenticate, JVM calls my Authenticator but in case authentication is successful it does uses local domain user and never calls my Authenticator. The issue is when this local domain user does not have enough permissions but authenticated correctly there is no way to supply JVM with another user to begin with.
What can I do to force JVM to ignore local domain user and to use Authenticator to collect credentials during NTLM authentication requested by the server in case the software runs on a Windows box with currently logged in domain user?
I am looking for the answer for a long time already but found only questions and suggestions to switch server from NTLM authentication which is not an option for me. From the developer's view it has to be pretty simple change for Sun to do in Java networking API. Is there any way to escalate it to Sun support? Maybe there is some property in some JRE patch level that allows to do this?
Thank you very much!
MarkThank you for the reply. I have kind of an opposite problem. I can perfectly connect from Linux computers to Microsoft IIS servers using NTLM or even NTLMv2 authentication. My problem is connecting from Windows client computer joined to the same domain as IIS server with the domain user logged in to this computer. In this case this user account will be used in any HTTP connections I initiate to this IIS server instead of the one that I want to supply in my custom Authenticator.
I have graphical interactive application that connects to IIS Server. When user runs it and connects to IIS server I want to prompt for the user/password regardless whether JRE may correctly authenticate using current user account credentials. The current user may not have enough permissions in IIS application so I want to use different user to login to IIS application.
Thank you anyway,
Mark -
JBoss and local interfaces (JNDI)
I'm trying to do simple example involving local interfaces on JBoss.
There is Bar remote interface, which uses Foo, local interface. And the problem is - i cant locate Foo within Bar:
ejb-jar.xml:
<session>
<ejb-name>BarEjb</ejb-name>
</session>
<entity>
<ejb-name>FooEjb</ejb-name>
</entity>To make FooEjb accessible for Bar via local interface, as manual says, i have to put additional reference in ejb-jar.xml for Bar:
<ejb-local-ref>
<ejb-ref-name>LocalFooEjb</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<local-home>beans.FooHome</local-home>
<local>beans.Foo</local>
<ejb-link>FooEjb</ejb-link>
</ejb-local-ref>But it doesnt change anything, JBoss maps Foo like this: "Bound EJB LocalHome 'FooEjb' to jndi 'local/FooEjb@13595063'", and
public class Bar ... {
Object ref = context.lookup("LocalFooEjb");
}resuluts in exception:
"java.lang.RuntimeException: LocalFooEjb not bound ..."
Question: how do i map local interfaces within JBoss to some human-readable and predictable name?
Thanks for help.
update:
specifying JNDI names in jboss.xml does the trick, but i still dont understand why JBoss ignores local-ref element. So anyone who can explain is welcome.
jboss.xml
...xml declaration..
<jboss>
<enterprise-beans>
<session>
<ejb-name>StockListEjb</ejb-name>
<jndi-name>remote/StockListEjb</jndi-name>
</session>
<entity>
<ejb-name>StockEjb</ejb-name>
<local-jndi-name>local/StockEjb</local-jndi-name>
</entity>
</enterprise-beans>
</jboss>Edited by: anykeyN on Jun 29, 2008 7:06 AM[skipped]
-
Hello,
I would compile PHP with the oci interface. PHP needs shared libraries. Where can I get the libraries.
GreetingsYou are using -instlib correctly.
It appears we have a bug in the -instlib implementation. Apparently it does not ignore local symbols, as it should do.
If you have a service contract with Oracle, please report this problem via your support channel to ensure the bug gets some attention. -
I am not good at English. But but... please hear my JSF Problem.
<h:form>
<h:inputText id="input1" required="#{true}"/>
<h:message for="input1"/>
<h:inputText id="input2" value="#{testBean.value}">
<f:convertNumber integerOnly="true"/>
</h:inputText>
<h:message for="input2"/>
<h:commandButton/>
</h:form>From browser:
1.Input empty string at input1. (this cause validation error.)
2.Input empty string at input2. (convet to null.)
3.Click commandButton.
I hope:
Display value at input2 is empty string. (My input value is keeped.)
But result is:
Display value at input2 is "#{testBean.value}". (My input value is forgotten...)
In my research:
1.converter converts empty string to null.
2."local value" is set to null.
3.Go to Rnder Response Phase By Input1 validation error.
4.getValue ignore "local value" if it is null and see VE.
Uhh... Why getValue method doesn't see isLocalValueSet?
I can't understand... Please Help me...Unfortunately I've had no luck with this solution. In my case I am performing a search using a session scope bean. My results are listed in a dataTable and I have an actionListener on a request scoped bean. All of that works fine.
faces-config.xml
<managed-bean>
<managed-bean-name>searchBean</managed-bean-name>
<managed-bean-class>com.package.SearchBean</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<managed-bean>
<managed-bean-name>detailBean</managed-bean-name>
<managed-bean-class>com.package.DetailBean</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
public class DetailBean
private String field1;
private String field2;
//Bind the dataTable component to the controller
protected transient UIData dataTable;
//The object used to populate the row in the table that was selected
protected transient Object row;
public DetailBean()
super();
FacesContext facesContext = FacesContext.getCurrentInstance();
Boolean isPostback = facesContext.getRenderKit().getResponseStateManager().isPostback(facesContext);
if(!isPostback) //always seems to be true
if(dataTable != null)
row = dataTable.getRowData();
public void detail(ActionEvent event)
row = dataTable.getRowData();
if(row != null)
Map<String,String> record = (Map<String,String>)row;
setField1(record.get("field1"));
setField2(record.get("field2"));
public String edit()
//do the edit
return "success";
<h:inputText id="field1" value="#{detailBean.field1}" required="true"/>
<h:inputText id="field2Input" value="#{detailBean.field2}"/>
<h:outputText id="field2Text" value="#{detailBean.field2}"/>
<h:inputText id="field2Hidden" value="#{detailBean.field2}"/>
<h:commandLink id="edit" action="#{detailBean.edit}" value="edit"/>
<h:messages errorStyle="color:red" showSummary="true"/> The values from the table are successfully populated and the page is shown with the values:
field1=test1
field2Input=test2
field2Text=test2
field2Hidden=test2when I clear field1 (required) and submit I have the following:
field1=
field2Input=test2
field2Text=
field2Hidden=test2
message about field1 being requiredI would expect field2Text to still retain the value.
Furthermore if I set the field2Text to readonly="true", it, too, does not retain its value. However in both cases once the required field has a value and is submitted, all values show as expected.
My only workaround for this is to set my detailBean session scope, but that avoids the problem. -
ISG Debug - IP configuration missing for radius proxy session initiation
Folks,
We are trying to configure the ISG as a Radius-Proxy for EAP Authentication. I have configured aaa server radius proxy, clients and aaa auth radius-proxy group as per the guide. I have my interface config as follows:
interface TenGigabitEthernet0/2/0.205
encapsulation dot1Q 205
ip vrf forwarding CS
ip address 10.20.0.1 255.255.224.0
ip helper-address global 172.X.X.X
no ip redirects
no ip proxy-arp
ip tcp adjust-mss 1420
service-policy type control DEFAULT_RULES
ip subscriber l2-connected
initiator dhcp
initiator radius-proxy
arp ignore local
When I try to connect a wifi client to an AP, I can see that the AP is forwarding the Access-Request to the ISG but the ISG does not forward it to the AAA. In the ISG debug I see the following message:
RADIUS: IP configuration missing for radius proxy session initiation
Can any one help to identify what is missing here pls?
Thank You in advance!Kiran,
Did you follow this guide? It looks like the interface configuration is there but you didnt include the actual radius configuration does it follow the guide here -
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_radius_proxy.html#wp1055053
Thanks,
Tarik Admani -
BO 4.1 SP2 Date Input controls
Hello,
We have made a BO upgrade from BO 4.0 sp7 patch level 3 to BO 4.1 sp2
After testing some reports we have realized that input controls with date dimensions are showing as timestamp and not in the correct date format (see attached), and are not filtering correctly, this was tested with different sources(bw,oracle,sql server) with the same result.
Is this a known issue, a bug? Anyone had this kind of problem?
Thanks on advance.
Santiago.If there's a difference between the viewers, it could likely be a defect. I would recommend that you open an incident with WebI Support to take a futher look.
I just did a quick search and don't see any ADAPTs open for the date format in input controls, other than one fixed in SP05 for Input Controls ignoring locale preferences (ADAPT01645726), which looks to have forwarded into BI 4.1 SP01, so you shouldn't see it in SP02:
http://service.sap.com/sap/support/notes/1748056
Though, if you change your viewing locale preferences and the format changes, I'd definitely recommend mentioning this in your incident.
I hope that helps!
Carly -
I got iLife 08 on my new mac but as I wanted to continue using iMovie HD I downloaded the free version available on the Apple site. The program is very unstable and crashes frequently, especially when trying to drag/amend clip lengths in the timeline, or adjust/delete transitions.
I tried a fresh download of iMovie HD and have even completely totally reloaded the machine's OS (on advice of Apple help desk) but still have the same problem. Any advice anybody? Thanks.Hi many thanks !!!
I found now that Czech Apple has also localized iMovie6 HD, I'm sure that this will solve the problem and will be installable.
Seams is better to check local pages rather then seek in US pages anyway it would be nice if Apple will not ignore localized versions of software a let users know also through official pages.
So if somebody else has this kind of problem localized version of iMovieHD 6 is available here:
http://apple.lokalizace.com/downloads/cs_iMovieHD6.dmg
This link contains all other localized software:
http://lokalizace.apple.cz/
Thank you again!!! -
Issues using 887 when authenticating with MER on a Fibre connection
Hello All
I've been battling for a week now to get the config correct for Cisco 887VA.
I understand Sky use MER to authenticate, however, in order to create the PPP connection, I am using PPPoE without passing any authentication, other than the username|password through option 61 (and vendor information on option 60).
I have Wiresharked the provided Sky router SR102 to obtain DHCP option 60 and 61 information and have entered these as hex values in the dialer interface.
I have also spoofed the SR102 MAC address on the dialer interface.
I have created a sub interface on e0, using dot1q to tag traffic to VLAN 101
I can indeed see traffic on interface e0.101 but the dialer receives NO ip address.
I can also see the modem is connected and in sync.
Am I correct in assuming the e0.101 interface is equivalent to the WAN connection on a seperate modem?
Config is below - please ignore local IPs, etc
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ******-ADSL
boot-start-marker
boot-end-marker
no logging buffered
enable secret 5 *********
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
memory-size iomem 10
clock timezone BST 0 0
clock summer-time BST recurring last Sun Mar 2:00 last Sun Oct 3:00
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1112313640
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1112313640
revocation-check none
rsakeypair TP-self-signed-1112313640
crypto pki certificate chain TP-self-signed-1112313640
certificate self-signed 01 nvram:IOS-Self-Sig#1.cer
ip source-route
ip cef
ip domain name vdsl.******.net
ip name-server 8.8.8.8
no ipv6 cef
multilink bundle-name authenticated
archive
log config
hidekeys
username admin privilege 15 secret 5 *********
controller VDSL 0
no ip ftp passive
ip ssh authentication-retries 5
ip ssh version 2
interface Ethernet0
no ip address
interface Ethernet0.101
encapsulation dot1Q 101
pppoe-client dial-pool-number 1
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
ip address 1.1.1.1 255.255.0.0
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly in
interface Dialer1
mac-address ****.****.**38
mtu 1492
ip dhcp client request classless-static-route
ip dhcp client client-id hex <<HEX STRING>>
ip dhcp client class-id hex <<HEX STRING>>
ip address dhcp
no ip redirects
no ip proxy-arp
ip flow ingress
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
ip route-cache policy
dialer pool 1
dialer-group 1
ppp ipcp dns request accept
ppp ipcp route default
ppp ipcp address accept
no cdp enable
router ospf 1
router-id 1.1.0.1
network 1.1.0.1 0.0.0.0 area 0
default-information originate
ip forward-protocol nd
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
ip flow-cache timeout inactive 10
ip flow-cache timeout active 5
ip flow-export version 9
ip flow-export destination 1.1.1.1 9991
ip flow-export destination 1.1.1.1 9991
ip nat inside source list NATACL interface Dialer1 overload
ip access-list standard NATACL
permit 1.0.0.0 0.255.255.255
logging esm config
access-list 1 permit 1.0.0.0 0.255.255.255
dialer-list 1 protocol ip permit
control-plane
banner motd ^CCCCCCCCC
*****************AUTHORISED USERS ONLY*****************
^C
line con 0
password 7 ***************
line aux 0
password 7 ***************
line vty 0 4
session-timeout 10
exec-timeout 0 0
timeout login response 300
transport input ssh
scheduler max-task-time 5000
end
Many thanksChris,
Just wondering if you managed to get anywhere with this, or just gave up? I'm a Sky Fibre user, sadly using the bundled "Sky Hub" (aptly named, as I consider "Layer 1 Network Hubs" to be just as gash as this ), and have battled with the MER DHCP-based authentication before.
Previously, I was experimenting using a Cisco Linksys E2400 (or E4200, I forget) running Tomato USB Firmware and was getting frustrated with the hex settings.
I notice in your configs you posted the following strings, which look like they are trying to send the DHCP Vendor ID/Options that MER needs:
ip dhcp client client-id hex <<HEX STRING>>
ip dhcp client class-id hex <<HEX STRING>>
For your specified <<HEX STRING>> were you also appending the necessary "0x3d" (61) to your custom-generated User+Pass hex (i.e. full string reads "0x3d<<USER+PASS HEX>>")?
Sources as below, but curious if this could fix it?
Sources
http://www.skyuser.co.uk/forum/technical-discussion/46464-skys-mer-why-does-not-work-other-routers-22.html
https://www.cm9.net/skypass/index.cgi
Maybe you are looking for
-
Hello Everyone, Here is my situation. I have one vi that is reading an AI task of 8 channels AI0 --> AI7 (one sample on demand) and also has control of all of the digital outputs on the board. My problem is that I want to run another vi that will u
-
How to get internet connection from Airport Express to a PC?
I recently bought an Airport Express to get internet connection from my new MAC COMPUTER TO ANOTHER PC which is located in another room. For unknown reason, I could not get the other PC to work. Any idea how to fix it so that I can get internet conne
-
Ant - Create Connection Pool on WebLogic 10.1.3
Hi, I have created the following build.xml file to create a Datasource on weblogic using ANT . The file is as follows: <?xml version="1.0" encoding="windows-1252" ?> <project name="deploy" default="all" basedir="."> <property file="build.properties
-
Where can I obtain a replacement key?
I have a satellite 3000-400 with a function [Fn] key top which is broken. Where can I obtain a replacement key top?
-
Hiding Text Fields Outwith a Repeating Frame
Hi I have a set up where a row of data fields are within a repeating frame but the text headings are outwith the R frame because I do not want the headings to repeat. How can I set this up so that if the main data fields is null then return false for