Print to Video Error msg: audio and vide devices may not match

When I attempt to print to video (using a Sony DV deck that has werved me well for years) I receive the message:
"The selected audio and video devices may not match:
-Apple FireWire NTSC (720 X 480)
Please verify that the audio and video outputs are externally routed to the intended device(s).
Do you want to proceed?"
I tried proceeding, and the video images output to the tape but without a sound track.
What to do? I must deliver a tape to my client!
I recently did a software update to 10.4.6. Could that be part of the problem?
Of did some setting change somewhere without my knowing it, and I need to reset it, if so what?
Thanks in advance

Hello!
Thank you for this. I did check the audio playback settings and it was NOT set to audio follows video. I then CHANGED it as you have kindly instructed. The audio video settings box you mention was NOT checked, so I didn't need to do anything there.
I then tried o launch Print to Video (not Edit to Tape) and sadly, the same error message occurred. Any suggestions would be much appreciated.
I am running FCP 4.5, recently upgraded to OS 10.4.6
Thanks in advance.
Hey Pamela,
Have you been monitoring externally this whole time?
If you have, and you've been getting external audio
and video, then this is probably a case of a
setting being off somewhere.
First, check your View > Audio Playback
setting. It should be set to Audio follows
Video.
Second, press Option-Command-Q to bring up the
Audio/Video Settings dialog. Click on the right-most
tab (A/V Devices) then confirm that the box for 'Use
Different output for Edit To Tape/Print To Video' is
not checked.
And please confirm that you're doing a Print to Video
and not an Edit To Tape. I ask because the only time
that I can remember getting this message is when I've
tried to do an Edit To Tape and didn't drag the
correct sequence from the browser (if I remember
correctly, I accidently dragged a sequence that was
also open in timeline).

Similar Messages

Selected audio and video devices may not match

Hello - I was able to Print to Video w/no problem, from my Mac Book Pro, to my Panasonic PV-GS320 w/no problem. Now, all of a sudden, when trying to do this, I get this msg.:
'The selected audio and video devices may not match. Please verify that the a/v outputs are externally routed to the intended device(s).'
Not sure what happened, or what changed, but here is my setup:
Sequence & Capture Presets are both: DV NTSC 48 kHz
Device control preset: FireWire Basic
Video Playback: Apple Firewire NYSC (720 x 480)
Audio Playback: Default
Like I said, I don't know what got changed, but, it was working before - hope someone can help, thanks so much!!
Kristina

I think I found the problem...I had forgotten to switch my Device Control Preset back to FireWire, from the previous non-controllable - thanks so much!
Message was edited by: Kristina Latour
Message was edited by: Kristina Latour

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

ERROR: Your password and confirmation password do not match. [******] - has been ignored.

In IE8m 7, 6, this error occurs. Instead of allowing the registrant to correct the mis-matched password, BC submits the form and places this in the submission report: ERROR: Your password and confirmation password do not match. [******] - has been ignored.
The user doesn't get logged in (obviously), however BC creates a record for this user, but without a password.
Has anyone else received this error?
The process happens like this, user completes form, which includes password|confirm password in which the confirm password is mistyped, when "submit" is pressed, the modal window appears indicating a mismatched password. The user clicks "okay" and then the page redirects to the submission page (or to a login screen if the form is set to redirect to a specific page).
This occured during the test phase and has been replicated!

Can you please insert that form onto a blank page with no template around it and test it? There seems to be a problem in javascript validation.
It's this line:
if(why != ""){alert(why);return false;}
So, when you click submit, the JS pops the alert if "why" varaible is not an empty string and then returns false, which means the form should not get submitted. However, on your form the browser goes on to this line and submits the form:
if(submitcount50254 == 0){submitcount50254++;theForm.submit();return false;}
I can't exactly pinpoint the problem, but it's in that code or some code interfering with that code.
Cheers,
-mario

Processor type of the file and the device does not match

We ve the following problem with Zfh 7 sp1. When trying to distribute a
application we receive the message failed. When i open the log is see the
below message.
The processor type of the file and the device does not match.
I ve searched on the message and i ve seen that it is a know error and it
should be fixed in SP1
10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
> GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
file and the device does not match.?
The processortype of the device is StrongARM and also from the
applications. Also when i put it on ALL/CEF it won't distribute.
Does some other people also have this problem.

Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Error: Contract object and business agreement do not match

Dear Friends,
I get this error on the service order.
Contract object and business agreement do not match
Any assistance would be appreciated.
Thanks and regards,
Aershid

Thanks Experts...
Sany.

I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match. How do I correct this?

I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match. How do I fix this?

I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.

The sample rates of the audio input and output devices do not match.

I am trying to record line-in audio and keep getting this error. have a realtek sound card. I have tried everything I know but cannot record. please help if you can, thanks.

Setting the Sample Rate in Windows Vista and 7

When creating application: SYS and SYSTEM users may not create applications

Dear all,
When i am performing the below mentioned operations
1) Importing Application
2) Create Application
3) Create from Spreadsheet
4) Demonstration Application
am getting this error message
"SYS and SYSTEM users may not create applications"
Please do the needfull

Create application using SYS or SYSTEM user is not good idea. Your objects will be created in SYSTEM tablespace, it's fatal option. Create new Workspace and create there your app.

Help with "Error syncing Audio and Midi" message. How to fix?

Hi,
I'm running Logic Pro 7.1 on a G5 Dual 2.5 PowerMac. My audio interface is a Digidisign Digi002R, and my MIDI interface is a MOTU Fastlane. Up until a few days ago everything was working fine. I didn't install any new software or anything.
All of a sudden in any Logic session I open (new or saved) I get all kinds of artifacts that sound like they're associated with sample rate problems.
True to form, on playback after 4 or 5 seconds a message comes up telling me that there is an error syncing audio and midi. It tells me that a sample rate of 88209, or 88213, or 88207 (each time it's different) was detected, and that there is a conflict between Logic and my external device.
My Digi002R is set to 44.1, and Logic is set to 44.1 as well. I have no idea where this problem came from.
The only thing I do know is that I've been using the Peachtree Press Apple Pro Training Series to study for my Level 1 Logic certification. it comes with a CD with Logic sessions to use with the text. The CD comes with a Logic Epress Demo but I didn't download that as I've already got Logic Pro. I dragged those session files to my desktop, and the problem occured for the first time when iopened up that first session from the CD. After that, every single session has this problem and I have no idea how to fix it.
Sorry for the incredibly long message, but can anybody help?
Thanks
PowerBook G4 15", PowerMac G5 Dual 2.5 Mac OS X (10.4.7)

Hey,
Thanks. I appreciate the help, but I've tried all of that. I just don't get it. I've unplugged everything, I've shut down, powered down, relaunched everything a dozen times and the problem doesn't go away. I know that the problem is with Logic because the interface works perfectly fnie with everything else, from Pro Tools to iTunes.
I'm having Logic Pro 7.2 shipped to me so I'm hoping that installing that will reset everything, but until then I can't do anything in Logic.
Anybody ever encounter anything like this?

File plays fine, then I get "Error Syncing Audio and Midi"

Hi, I just installed my upgrade to Logic 9 from 8. When I play a file , it goes fine at first, then if I save it, a crackling sound takes over and I get a message like "Error syncing Audio and Midi". Saving the file is not the only thing that will cause this to occur but I can't pinpoint exactly what and when these other times happen.
I did some troubleshooting with an Apple Rep by phone the other day and it seemed we had it figured out that the problem was about bringing projects over from Logic 8 and opening them in Logic 9. The suggested solution was to export audio tracks from 8 and import them into 9 as a fresh project.
It then seemed that when I started a project from scratch in Logic 9, I had no problems. This no longer seems to hold water as a theory. The problem I'm having now is with a project I started fresh in Logic 9.
When the crackling sound starts, the play speed seems to slow down as if I were playing an old 78 on the wrong speed or something.
Also I can't bounce to make an Mp3 in Real time - that causes this crackling sound/speed issue to occur as well. When I try to bounce an Mp3 offline, it re-hashes the first Mp3 I did and I don't hear my changes even as I choose to replace the file. This is screwy,...really.
I appreciate any assistance or ideas on this.
Thanks, Frank B.

I was getting the same issue last night with a stereo track and one instance of Addictive Drums with just tom fills and a few crash cymbals in the sequence. I thought it might be a AD issue because I assigned a multi instrument to AD which is not necessary but I forgot that. I deleted the multi instrument and this seems like it solved it for me. I just ran the track and no Midi Audio sync errors or the crackling sound. Do you have any multi instruments in your setup?

Error msg. states: the iPad "iPad" could not be updated. An unknow error occurrred (-1).

error msg. states: the iPad "iPad" could not be updated. An unknown error occurred (-1). My iPad is 16gb series 2 i believe wifi enabled

Hey there charlottefromwilliamsburg,
I see that you are experiencing and issue when attempting to update your iPad. Here is an article for you that may help you address this error:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-kw/TS3694
I would suggest that you particularly pay attention to the information in the following section, which addresses error codes such as the one you have been given:
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

TS3694 trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do?

trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do? - Help cos I've lost my contacts!!!!!

If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

Aftr updating s/w - told to reinstall itunes. Error msg Servie Apple Mobile Device failed to starat. Vertify that you hv suff privileges to start sys services

Aftr updating s/w - told to reinstall itunes. Error msg Service Apple Mobile Device failed to start. Vertify that you have suff privileges to start system services

Please give me some solution on above issue.....

I have error 39 message and my dvd is not showing up in my computer.i have reinstalled many times a

hp pavillion p6000 series
hp dvd rw ad-7251h5 sata cdrom
i have error 39 message and my dvd is not showing up in my computer

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Print to Video Error msg: audio and vide devices may not match

Similar Messages

Maybe you are looking for