Kernel Errors!!!
Hi All I have a 15" PB Aluminum 1.5ghz with 1GB of ram. Just bought off a friend and when I did a fresh erase and install of OS X 10.4, repaired permissions and rebooted I get the kernel error telling me to hold down the power button and restart. So I did this and when it restarts I get the grey apple background with a load of writing all over it. How do I try and figure out what is causing the problem. Is there a way to get into the system to access the log files as I cannot get OS X to boot into the system. I also ran tech tool pro from the DVD and that says everything has passed such as processor, memory etc....
Help Please
I don't think it's OS X (10.4.11) that's causing the problem as I did erase and install about 3 times, verified the HDD and repaired permissions and no errors.
That should take care of any directory errors. For now we can consider the directory to be in order.
Also the HDD is new so I am guessing it's not that either as the previous owner had kernel errors with the old HDD.
Well, that does not necessarily eliminate the problem. It may be that the issue which the previous owner had was not necessarily the HDD itself. Could be a faulty ATA ribbon cable, or even the ATA Controller on the logic board. If you have a firewire HDD available you could install the OS on it and try booting from it. Indeed, you can pull the HDD, install it in a Firewire Enclosure connect it to the computer via Firewire and see if the problem persists.
the Airport Extreme is factory installed and I have nothing external attached and no applications installed at all yet.
The AE card can become loosened in the socket either from internal heat of the computer, or maybe jostled when the HDD was being replaced, or it may be failing. Pulling it out, cleaning the contacts and reseating it securely may or may not make a difference.
I can only begin to guess that it is the RAM as the original RAM has been removed and replaced with a new 1GB stick (Not Crucial RAM by the way).
That is definitely a possibility, but not a certainty. If you can get ahold of the original RAM and install it just for testing, it should help determine whether the RAM currently installed is the issue.
cornelius
Similar Messages
-
my macbook is four month old and since some days I receive always a kernel error when I want to start up. but the hardware tests are positive. any solutions?
17.02.08 12:43:18 kernel npvhash=4095
17.02.08 12:43:16 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
17.02.08 12:43:16 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
17.02.08 12:43:16 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
17.02.08 12:43:18 kextd[10] 398 cached, 0 uncached personalities to catalog
17.02.08 12:43:20 kernel hi mem tramps at 0xffe00000
17.02.08 12:43:19 DirectoryService[11] Launched version 5.0 (v514)
17.02.08 12:43:20 kernel PAE enabled
17.02.08 12:43:20 kernel 64 bit mode enabled
17.02.08 12:43:20 kernel Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
17.02.08 12:43:20 kernel standard timeslicing quantum is 10000 us
17.02.08 12:43:20 kernel vmpagebootstrap: 509216 free pages and 15072 wired pages
17.02.08 12:43:20 kernel migtable_maxdispl = 79
17.02.08 12:43:20 kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:20 kernel Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:20 kernel devfsmakenode: not ready for devices!
17.02.08 12:43:20 kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
17.02.08 12:43:20 kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
17.02.08 12:43:20 kernel Loading security extension com.apple.security.TMSafetyNet
17.02.08 12:43:20 kernel calling mpopolicyinit for TMSafetyNet
17.02.08 12:43:20 kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
17.02.08 12:43:20 kernel Loading security extension com.apple.nke.applicationfirewall
17.02.08 12:43:20 kernel Loading security extension com.apple.security.seatbelt
17.02.08 12:43:20 kernel calling mpopolicyinit for mb
17.02.08 12:43:20 kernel Seatbelt MACF policy initialized
17.02.08 12:43:20 kernel Security policy loaded: Seatbelt Policy (mb)
17.02.08 12:43:20 kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
17.02.08 12:43:20 kernel The Regents of the University of California. All rights reserved.
17.02.08 12:43:20 kernel MAC Framework successfully initialized
17.02.08 12:43:20 kernel using 10485 buffer headers and 4096 cluster IO buffer headers
17.02.08 12:43:20 kernel IOAPIC: Version 0x20 Vectors 64:87
17.02.08 12:43:20 kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:20 kernel ACPI: System State [S0 S3 S4 S5] (S3)
17.02.08 12:43:20 kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:20 kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:20 kernel mbinit: done
17.02.08 12:43:20 kernel Security auditing service present
17.02.08 12:43:20 kernel BSM auditing present
17.02.08 12:43:20 kernel rooting via boot-uuid from /chosen: 9A54D9E6-2C18-3A51-9F1A-5305A9BE5707
17.02.08 12:43:20 kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
17.02.08 12:43:21 kernel FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001d4ffffe6314f0; max speed s400.
17.02.08 12:43:21 kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/FUJITSU MHW2160BHPL Media/IOGUIDPartitionScheme/Customer@2
17.02.08 12:43:21 configd[14] setting hostname to "hermes-baby.local"
17.02.08 12:43:21 kernel BSD root: disk0s2, major 14, minor 2
17.02.08 12:43:21 kernel CSRHIDTransitionDriver::start []
17.02.08 12:43:21 kernel CSRHIDTransitionDriver::switchToHCIMode legacy
17.02.08 12:43:21 mDNSResponder mDNSResponder-161.1 (Oct 11 2007 00:22:24)[16] starting
17.02.08 12:43:21 kernel USBF: 3. 25 CSRHIDTransitionDriver[0x3f38000](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
17.02.08 12:43:21 kernel CSRHIDTransitionDriver... done
17.02.08 12:43:21 kernel Extension "com.apple.iokit.IOBluetoothFamily" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:21 kernel Extension "com.apple.iokit.IOBluetoothFamily" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:21 kernel Extension "com.apple.iokit.IOBluetoothFamily" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
17.02.08 12:43:21 kernel E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
17.02.08 12:43:21 kernel Jettisoning kernel linker.
17.02.08 12:43:21 kernel Resetting IOCatalogue.
17.02.08 12:43:21 kernel GFX0: family specific matching fails
17.02.08 12:43:21 kernel display: family specific matching fails
17.02.08 12:43:21 kernel Matching service count = 1
17.02.08 12:43:22 kernel Matching service count = 3
17.02.08 12:43:22 kernel Matching service count = 3
17.02.08 12:43:22 kernel Matching service count = 3
17.02.08 12:43:22 kernel Matching service count = 3
17.02.08 12:43:22 kernel Matching service count = 3
17.02.08 12:43:22 kernel display: family specific matching fails
17.02.08 12:43:22 com.apple.SecurityServer[20] Entering service
17.02.08 12:43:22 mDNSResponder[16] SetDomainSecrets: mDNSKeychainGetSecrets failed error 0 CFArrayRef 00000000
17.02.08 12:43:28 fseventsd[35] bumping event counter to: 0x370db (current 0x0) from log file '00000000000232f6'
17.02.08 12:43:31 kernel display: family specific matching fails
17.02.08 12:43:33 kernel Previous Shutdown Cause: 3
17.02.08 12:43:35 kernel ath_attach: devid 0x24
17.02.08 12:43:35 kernel Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
17.02.08 12:43:35 kernel GFX0: family specific matching fails
17.02.08 12:43:35 kernel GFX0: family specific matching fails
17.02.08 12:43:35 kernel display: family specific matching fails
17.02.08 12:43:35 configd[14] Error: No interface name AirPort_Athr5424ab
17.02.08 12:43:35 kernel athdescdmasetup: tx dddescpaddr = 0x5abe000, length 0x46500(288000) bytes
17.02.08 12:43:35 configd[14] Error: ioPublishedDriverCallback() failed to initDeviceFromService()
17.02.08 12:43:35 kernel athdescdmasetup: beacon dddescpaddr = 0x3522000, length 0x90(144) bytes
17.02.08 12:43:35 kernel mac 12.10 phy 8.1 radio 12.0
17.02.08 12:43:36 kernel GFX0: family specific matching fails
17.02.08 12:43:36 kernel display: family specific matching fails
17.02.08 12:43:37 kernel display: family specific matching fails
17.02.08 12:43:37 kernel GFX0: family specific matching fails
17.02.08 12:43:37 kernel GFX0: match category IOFramebuffer exists
17.02.08 12:43:37 kernel display: match category IOFramebuffer exists
17.02.08 12:43:37 kernel yukon: Ethernet address 00:1b:63:34:f8:a1
17.02.08 12:43:37 kernel AirPort_Athr5424ab: Ethernet address 00:1c:b3:c4:23:70
17.02.08 12:43:37 rpc.statd[27] statd.notify - no notifications needed
17.02.08 12:43:39 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[30] Login Window Application Started
17.02.08 12:43:42 org.ntp.ntpd[24] Error : nodename nor servname provided, or not known
17.02.08 12:43:39 bootlog[41] BOOT_TIME: 1203248590 0
17.02.08 12:43:42 ntpdate[77] can't find host time.euro.apple.com
17.02.08 12:43:42 ntpdate[77] no servers can be used, exiting
17.02.08 12:43:43 /usr/sbin/ocspd[81] starting
17.02.08 12:43:46 kernel display: Not usable
17.02.08 12:43:47 kextd[10] writing kernel link data to /var/run/mach.sym
17.02.08 12:43:51 loginwindow[30] Login Window Started Security Agent
17.02.08 12:43:53 SecurityAgent[96] Showing Login Window
17.02.08 12:43:58 SecurityAgent[96] User info context values set
17.02.08 12:43:59 SecurityAgent[96] Login Window done
17.02.08 12:43:59 loginwindow[30] Login Window - Returned from Security Agent
17.02.08 12:43:59 loginwindow[30] USER_PROCESS: 30 console
17.02.08 12:44:00 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[90]) Exited: Terminated
17.02.08 12:44:06 Dock[111] _DESCRegisterDockExtraClient failed 268435459
17.02.08 12:44:08 airportd[71] Error: Apple80211Associate() failed -13
17.02.08 12:44:09 /System/Library/CoreServices/coreservicesd[74] SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Nicola Ruffos öffentlicher Ordner) returned -14135
17.02.08 12:44:11 kernel 11D beacon causing regdomain change to CC 756
17.02.08 12:44:11 kernel en1: 802.11d country code set to 'CH'.
17.02.08 12:44:11 kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
17.02.08 12:44:12 airportd[71] Could not find any preferred networks; trying broadcast requests..
17.02.08 12:44:13 com.apple.launchctl.System[2] BootCacheControl: could not fetch history: Cannot allocate memory
17.02.08 12:44:13 com.apple.launchctl.System[2] BootCacheControl: could not stop cache/fetch history: Cannot allocate memory
17.02.08 12:44:20 mDNSResponder[16] uDNS_CheckCurrentQuestion no DNS server for b.dns-sd.udp.0.1.0.10.in-addr.arpa. (PTR)
17.02.08 12:44:20 mDNSResponder[16] uDNS_CheckCurrentQuestion no DNS server for db.dns-sd.udp.0.1.0.10.in-addr.arpa. (PTR)
17.02.08 12:44:20 mDNSResponder[16] uDNS_CheckCurrentQuestion no DNS server for r.dns-sd.udp.0.1.0.10.in-addr.arpa. (PTR)
17.02.08 12:44:20 mDNSResponder[16] uDNS_CheckCurrentQuestion no DNS server for dr.dns-sd.udp.0.1.0.10.in-addr.arpa. (PTR)
17.02.08 12:44:20 mDNSResponder[16] uDNS_CheckCurrentQuestion no DNS server for lb.dns-sd.udp.0.1.0.10.in-addr.arpa. (PTR)
17.02.08 12:44:28 quicklookd[117] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/nicolaruffo/Desktop/u-ag-20040408-Profil.xls>'
17.02.08 12:44:33 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 13] CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
17.02.08 12:44:33 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 13] CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
17.02.08 12:44:35 mDNSResponder[16] * Keychain Changed * KeychainEvent=3 kSecAddEvent
17.02.08 12:44:36 mDNSResponder[16] Adding registration domain nicolaruffo.members.mac.com.
17.02.08 12:44:36 mDNSResponder[16] Setting up AutoTunnel address FD86:FFEC:5DA2:4B28:021B:63FF:FE34:F8A1
17.02.08 12:44:36 mDNSResponder[16] Double NAT (external NAT gateway address 192.168.0.5 is also a private RFC 1918 address)
17.02.08 12:44:39 mDNSResponder[16] Failed to obtain NAT port mapping from router 10.0.1.1 external address 192.168.0.5 internal port 4500
17.02.08 12:45:13 fseventsd[35] log dir: /Volumes/SCHNAUZE/.fseventsd getting new uuid: F8BB9302-AA96-4A13-9D1F-A49A397A97FD
17.02.08 12:45:13 SystemUIServer[113] Could not find image named 'TMDisk'.
17.02.08 12:45:38 com.apple.dyld[136] updatedyld_sharedcache[136] current cache invalid because /System/Library/QuickTime/QuickTimeComponents.component/Contents/MacOS/QuickTim eComponents has changed
17.02.08 12:47:34 kernel athrxbufinit: no mbuf/cluster
17.02.08 12:47:34 /System/Library/CoreServices/backupd[173] Backup requested by user
17.02.08 12:47:34 /System/Library/CoreServices/backupd[173] Starting standard backup
17.02.08 12:47:34 /System/Library/CoreServices/backupd[173] Backing up to: /Volumes/SCHNAUZE/Backups.backupdb
17.02.08 12:47:35 /System/Library/CoreServices/backupd[173] Ownership is disabled on the backup destination volume. Enabling.
17.02.08 12:47:43 KernelEventAgent[31] tid 00000000 received unknown event (256)
17.02.08 12:47:48 /System/Library/CoreServices/backupd[173] Backup content size: 84.0 GB excluded items size: 2.7 MB for volume Macintosh HD
17.02.08 12:47:48 /System/Library/CoreServices/backupd[173] No pre-backup thinning needed: 100.84 GB requested (including padding), 179.99 GB available
17.02.08 12:47:48 /System/Library/CoreServices/backupd[173] MDBackupBegin() returned result (909) > 0, waiting
17.02.08 12:47:57 authexec[228] executing /System/Library/Frameworks/Carbon.framework/Versions/Current/Support/LaunchCFMA pp
17.02.08 12:48:21 com.apple.dyld[136] updatedyld_sharedcache[136] regenerated cache for arch=ppc
17.02.08 12:48:21 com.apple.launchd[1] (com.apple.dyld) Throttling respawn: Will start in 60 seconds
Message was edited by: nicolaruffoHi
Welcome to Apple discussions
My first iBook suffered from persistent KPs on start up. Eventually I resolved the issue by cleaning the cache files. There are a number of cheap/free share ware apps. My favourite is Tiger (or Leopard) Cache Cleaner from here: http://www.northernsoftworks.com/
For more general info on resolving KPs, try here: http://www.thexlab.com/faqs/kernelpanics.html
Good luck
Bob -
Post Ehp7 upgrade we are facing issue when executing any db related tcodes.
Eg:
When executing DB02 we are getting the below error message and the workprocess are getting restarted.
XXX: SAP System Message:
Work process restarted; session terminated
In ST22 we are getting the below dump:
Category Internal Kernel Error
Runtime Errors SYSTEM_CORE_DUMPED
Date and Time 04/14/2014 23:59:21
|Short Text |
| Process terminated by signal " ". |
|What happened? |
| Error in the SAP kernel |
| |
| The current ABAP program "CL_GUI_HTML_VIEWER============CP" had to be |
| terminated because the ABAP |
| processor detected a system error. |
|What can you do? |
| Note which actions and entries caused the error to occur. |
| |
| Consult your SAP administrator. |
| |
| Using transaction ST22 for ABAP dump analysis, you can view, manage, |
| and retain termination messages for longer periods. |
|Error analysis |
| A process in the SAP system has been terminated by a signal in the |
| operating system. |
| |
| Possible causes are: |
| 1) An internal error in the SAP system |
| 2) Process terminated externally (by the system administrator) with a |
| signal. |
| Last error logged in SAP kernel |
| |
| Component............ Taskhandler |
| Location.......... SAP-Server sap-xxx1_XXX_00 on host sap-xxx1 (wp 4) |
| Version.............. 1 |
| Error code............ 16789511 |
| Error text............ ThSigHandler: Signal |
| Description............ |
| System call.......... |
| Module.............. /bas/740_REL/src/krn/si/th/thxxhead.c |
| Line................ 2343 |
| The error reported by the operating system is: Error number..... |
| Error text....... " " |
|How to correct the error |
| The SAP system work directory (/usr/sap/c11/D00/work for example) often |
| contains a file called 'core'. |
| |
| Save this file under another name. |
| If you cannot solve the problem yourself, please send the following |
| information to SAP: |
| |
| 1. This description of the problem (short dump) |
| To do this, choose System -> List -> Save -> Local File (unconverted) |
| on the screen you are in now. |
| |
| 2. A suitable system log |
| To do this, call the system log in transaction SM21. Restrict the time |
| interval to ten minutes before the short dump and five minutes after |
| it. In the display, choose System -> List -> Save -> Local File |
| (unconverted). |
| |
| 3. If these are programs of your own, or modified SAP programs: Source |
| code of these programs |
| To do this, choose More Utilities -> Upload/Download -> Download in |
| the Editor. |
| |
| 4. Details regarding the conditions under which the error occurred or |
| which actions and input caused the error. |
|System environment |
| SAP Release..... |
| SAP Basis level |
| |
| Application server... |
| Network address...... |
| Operating system... |
| Release.............. |
| Hardware type....... |
| Character length..... " " Bits |
| Pointer length........ " " Bits |
| Work process number... |
| Shortdump setting. |
| |
| Database server... |
| Database type..... |
| Database name..... |
| Database user ID |
| |
| Terminal.......... |
| |
| Character set |
| |
| SAP kernel....... |
| Created on....... |
| Created at....... |
| Database version |
| Patch level....... |
| Patch text....... |
| |
| Database............. |
| SAP database version. |
| Operating system... |
| |
| Memory consumption |
| Roll.... 0 |
| EM...... 12288800 |
| Heap.... 0 |
| Page.... 49152 |
| MM used. 6609472 |
| MM free. 1262576 |
|User and Transaction |
| Client................. |
| User.................. |
| Language key.......... |
| Transaction......... DB6SPACE |
| Transaction ID...... 534C070ABAB10BB0E1008000A7EEAE18 |
| |
| EPP whole context ID...... 534C069FBAB10BB0E1008000A7EEAE18 |
| EPP connection ID........ 00000000000000000000000000000000 |
| EPP call counter......... 0 |
| |
| Program.............. CL_GUI_HTML_VIEWER============CP |
| Screen.............. SAPLSDBACCMS 0042 |
| Screen line.......... 3 |
| Active debugger..... " " |
|Information on where terminated |
| The termination occurred in ABAP program "CL_GUI_HTML_VIEWER============CP", |
| in "ENABLE_SAPSSO". The main program |
| was "SAPLSDB6CCMS2 ". |
| |
| In the source code, the termination point is in line 52 of (Include) |
| program "CL_GUI_HTML_VIEWER============CM015". |
|Source Code Extract |
|Line |SourceCde |
| 22| cl_http_server=>get_location( |
| 23| exporting |
| 24| application = '/sap/public/myssocntl' " #EC NOTEXT constant key if required in conf|
| 25| importing |
| 26| host = host |
| 27| port = service |
| 28| out_protocol = protocol ). |
| 29| m_http_host = host. |
| 30| m_http_service = service. |
| 31| |
| 32|else. |
| 33|*if optional parameter in_protocol is set, we are passing the same to get_location method. |
| 34| cl_http_server=>get_location( |
| 35| exporting |
| 36| application = '/sap/public/myssocntl' " #EC NOTEXT constant key if required in conf|
| 37| protocol = in_protocol |
| 38| importing |
| 39| host = host |
| 40| port = service |
| 41| out_protocol = protocol ). |
| 42| m_http_host = host. |
| 43| m_http_service = service. |
| 44|endif. |
| 45| |
| 46| |
| 47| |
| 48| concatenate protocol '://' m_http_host ':' m_http_service " #EC NOTEXT |
| 49| '/sap/public/myssocntl?sap-client=' sy-mandt into url. " #EC NOTEXT |
| 50| |
| 51| |
|>>>>>| call 'Reentrance_Ticket' id 'OPCODE' field 'C' |
| 53| id 'RETICKET' field sso_ticket. |
| 54|* SY-SUBRC = 0 : everything o.k. (ticket obtained) |
| 55|* -1 : illegal/unknown opcode/parameter (should not occur) |
| 56|* -2 : illegal caller (ABAP callstack) (should not occur) |
| 57|* 1 : login/accept_sso2_ticket = 0 (customizing setting!) |
| 58|* 2 : ticket cannot be created (use note 495911 to analyse) |
| 59| case sy-subrc. |
| 60| when 0. "resume |
| 61| when 1 or 2. message i146(00) raising cntl_error. |
| 62| clear sso_ticket. |
| 63|* RAISE SAPSSO_CONFIG_ERROR. |
| 64| when others. message e191(00) raising cntl_error. |
| 65| endcase. |
| 66| |
| 67| if enabled is not initial and sso_ticket is not initial. |
| 68| i_enabled = 1. |
| 69| endif. |
| 70| |
| 71| call method call_method |
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 5 METHOD CL_DBA_ACTION_WD_DBA_COCKPIT==CP CL_DBA_ACTION_WD_DBA_COCKPIT==CM003 21 |
| CL_DBA_ACTION_WD_DBA_COCKPIT=>IF_DB6_ACTION_CONTROLLER~INIT |
| 4 MODULE (PBO) SAPLSDBACCMS RSDB6NAV 106 |
| HANDLE_PBO |
| 3 FUNCTION SAPLSDBACCMS LSDBACCMSU01 12 |
| DBA_CCMS_CALL_SCREEN |
| 2 METHOD CL_DB6_TREE_NAVIGATOR=========CP CL_DB6_TREE_NAVIGATOR=========CM003 476 |
| CL_DB6_TREE_NAVIGATOR=>CALL_ACTION |
| 1 MODULE (PBO) SAPLSDB6CCMS2 RSDB6NAV 429 |
| PREPARE_OUTPUT_0900 |
|Chosen variables |
|Name |
| Val. |
|No. ??? Ty. ??? |
|Name ??? |
|PROTOCOL |
| |
| 8000 |
| 3333 |
| 8000 |
| 38303030 |
| |
| http |
| 6777 |
| 8440 |
| 68747470 |
|%_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 20202020 |
|ME->M_HTTP_HOST |
| sap-xxx1 |
| 7672767322222222222222222222222222222222222222222222222222222222222222222222222222222222222222|
| 310D318100000000000000000000000000000000000000000000000000000000000000000000000000000000000000|
| 7361702D73617831202020202020202020202020202020202020202020202020202020202020202020202020202020|
|ME->M_HTTP_SERVICE |
| 8000 |
| 33332222222222222222222222222222 |
| 80000000000000000000000000000000 |
| 3830303020202020202020202020202020202020202020202020202020202020 |
|URL |
| http://sap-xxx1:8000/sap/public/myssocntl?sap-client=100 |
| 67773227672767333333276727766662677766676376726666673333 |
| 8440AFF310D3181A8000F310F052C93FD933F3E4CF310D3C95E4D100 |
| 687474703A2F2F7361702D736178313A383030302F7361702F7075626C69632F6D7973736F636E746C3F7361702D63|
|SY-MANDT |
| 100 |
| 333 |
| 100 |
| 313030 |
|SSO_TICKET |
| 100#py³0############pwê######### MON_GET_RTS_RQST M_RSRC######################################|
| 333077B300000000000077E00001000024445445555555555245555400000000000000000000000000000000000000|
| 1000093000000000A01007A0000200000DFEF754F243F21340DF232300060000000000000003000000000000000000|
| 313030007079B33000000000000000000A0001007077EA000000001200000000204D4F4E5F4745545F5254535F5251|
|SY-SUBRC |
| 0 |
| 0000 |
| 0000 |
| 00000000 |
|SY-REPID |
| CL_GUI_HTML_VIEWER============CP |
| 4454545454455445453333333333334522222222 |
| 3CF759F84DCF695752DDDDDDDDDDDD3000000000 |
| 434C5F4755495F48544D4C5F5649455745523D3D3D3D3D3D3D3D3D3D3D3D43502020202020202020 |
|SYST-REPID |
| CL_GUI_HTML_VIEWER============CP |
| 4454545454455445453333333333334522222222 |
| 3CF759F84DCF695752DDDDDDDDDDDD3000000000 |
| 434C5F4755495F48544D4C5F5649455745523D3D3D3D3D3D3D3D3D3D3D3D43502020202020202020 |
|No. 5 Ty. METHOD |
|Name CL_DBA_ACTION_WD_DBA_COCKPIT=>IF_DB6_ACTION_CONTROLLER~INIT |
|%_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 20202020 |
|ME->HTML_CONTAINER |
| {O:1007*\CLASS=CL_GUI_CUSTOM_CONTAINER} |
| 1000000E |
| 0000003F |
| 10000000000003EF |
|ME->HTML_PANEL |
| {O:1006*\CLASS=CL_GUI_HTML_VIEWER} |
| 1000000E |
| 1000003E |
| 11000000000003EE |
|%_SPACE |
| |
| 2 |
| 0 |
| 20 |
|SPACE |
| |
| 2 |
| 0 |
| 20 |
|SY-REPID |
| CL_DBA_ACTION_WD_DBA_COCKPIT==CP |
| 4454445445444554544454444545334522222222 |
| 3CF421F1349FEF74F421F3F3B094DD3000000000 |
| 434C5F4442415F414354494F4E5F57445F4442415F434F434B5049543D3D43502020202020202020 |
|ABAP_TRUE |
| X |
| 5 |
| 8 |
| 58 |
|SY |
| ###############################################################################¸##############|
| 0000000000010000000000000001000000000000000000000000000000000000000000000000000B00000000000000|
| 0000000000020001000000000004000000000000000100060001000000010000000000000000000800000000000000|
| 0000000000000000000000120000000100000000000000000000001400000000000000000000000000000001000000|
|EVENT-EVENTID |
| 0 |
| 0000 |
| 0000 |
| 00000000 |
|CL_GUI_HTML_VIEWER=>M_ID_SAPEVENT |
| 1 |
| 0000 |
| 0001 |
| 00000001 |
|CL_GUI_HTML_VIEWER=>WB_CMDID_PRINT |
| 6 |
| 0000 |
| 0006 |
| 00000006 |
|EVENTS |
| Table[initial] |
| |
|EVENT |
| #### ### |
| 00002000 |
| 00000000 |
| 0000000020000000 |
|No. 4 Ty. MODULE (PBO) |
|Name HANDLE_PBO |
|%_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 20202020 |
|NAVIGATOR |
| {O:1*\CLASS=CL_DB6_TREE_NAVIGATOR} |
| F0000000 |
| E0000001 |
| FE00000000000001 |
|%_FL1*TS_COLL_TPL_DETAIL_TAB |
| <initial> |
| <initial> |
| <initial> |
| <<iinniittiiaall>> |
|%_##TVREG_002 |
| |
| 2 |
| 0 |
| 20 |
|ABAP_TRUE |
| X |
| 5 |
| 8 |
| 58 |
|%_ARCHIVE |
| |
| 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222|
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000|
| 2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020|
|CANCEL_CODES |
| Table[initial]Hi,
it could be the sso issue. please ensure
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
Restart server after changed and retry.
Is problem persist, kindly ensure
1) post upgrade steps are performed
2) no issue with secstore and strustsso2
3) update kernel to latest level
Hope it helps,
Nicholas Chang -
Hi I was on my windows side of my mac when i got the blue-screen-of-death with something saying Critical Kernel Error, weird noises from the speakers and the macbook pro did a hard shut off.
Since then I can no longer boot into the mac or windows side (both are stuck infinitely loading). I ran disk utility on the mac side and I have an "Invalid Node Structure." Which disk utility cannot repair. I do have DiskWarrior on another mac to try and rebuild the mac partition through a firewire connection - i think that is the correct course of action ?
But does this mean my windows partition is likely gone or any idea what went on ? As I am terribly confused that while on my windows side I had an error that messsed up both partitions.
Or what to check for so this hopefully doesnt happen again if it is a hardware problem? My drive smart status is listed as "OK" and I cant seem to run the Apple Hardware test as upon attempting to get into it the laptop just shuts off while loading it, although I read somewhere the Apple Hardware test is no longer preloaded on macbook pros.
The system in question is a 15" macbook pro bought around July 2011.
Thank you,
WesAlright I have both my mac side and windows side repaired and functioning fine. Should I still be concerned ? Linc I know you are saying this is a drive malfunction but is there a way I can be sure ? I still cannot run AHT (restart, hold down D), and my laptop shipped with Lion installed so I believe it should run. It just boots into the mac side when I hold D..
-
Blue screen - Data Inpage Kernel Error on Satellite Pro L
I have had my laptop 6 months now.
Now a blue screen comes and says - Data Inpage Kernel Error.
I reset back to factory settings but it is still happening.Is the hard drive knackered?
If so is it covered by the warranty?
If not which hard drive do i need and where can i get it from.
Many Thanks for your help.Hi mono33,
> I reset back to factory settings but it is still happening.
This would mean its no software malfunction and its serious hardware issue. If your notebook is under warranty, the repair is covered by warranty and ASP will repair the unit for free.
So at first I would check if the notebook is under warranty. If yes give it to an ASP and the gus can repair the notebook. Otherwise you can also ask an ASP for help but its not for free.
Theoretically it could be HDD related but it could be another hardware part as well. -
Hi guys and girls.
Background
I have a MacBook Pro (March 2009 vintage). It was loaded with OS X Leopard on a 250GB HDD. When Snow Leopard was released, I upgraded using a DVD bought from Apple. In time, I added an external USB HDD to use for Time Machine Backups. I am now, however, knocking up against the capacity limit of the original hard drive.
Given the above, plus the fact that I no longer appear to have the Snow Leopard DVD (upgrade version I believe) - what is the recommended way to get back to my old setup (files, OS, settings etc), but with my new, larger HDD?
So far I have tried:
1. Formatting new HDD as Mac OS Extended (journaled), GUID partition having booted using my original (Leopard) installation DVD. I then selected the latest Time Machine (Snow Leopard) backup. After a couple of hours of restoring from that backup, the system restarted, but had kernel errors on bootup.
2. As above, but when formatting, chose to zero all data. This had the same end result.
Questions:
1. Are the kernel errors I'm experiencing due to the mismatch of booting off Leopard and restoring a Snow Leopard backup?
2. Would finding my (or even a) Snow Leopard upgrade DVD help? If so, how?
3. What am I doing wrong generally? I do like to try to understand these things!
4. As above, what is the recommended way of doing what I'm trying to do, given the limitations of release DVDs etc.
Many thanksSimplest thing would be to buy the retail SL installation disc ($20 USD) and use it to do the migration. There might be an issue trying to use a SL TM version with Leopard.
-
Kernel error on startup after trying to backup with Time Machine
Hi there,
So last night I was using time machine to back up my macbook hard drive to my external hard drive. As this was happening, my machine was slowing down and such which I attributed it to having a couple of programs running at the same time as backing up. A little bit into this, I got the spinning pinwheel that would not stop or go away so I decided to let it go all night because maybe it would go away as usual. This morning it was still spinning so I shut down the computer. I didn't know if Time machine had finished or not. I tried restarting it an I got a kernel error. I tried to reset the PRAM and the NVRAM but I still got Kernel errors. I would try to do an archive and install of Leopard, but I left my disc in my dorm and I won't be able to get to it until next month. I do however have my Tiger start up disc that came with the MacBook when I first got it. Now I was thinking of doing an archive and install downgrade to Tiger just until I could reinstall Leopard next month. I don't know if that would be a good idea or not. I just want to make sure my data is ok by hopefully reinstalling Tiger to copy my data to my external HD. Is there a way to do this and not mess anything up? I don't think it's my hard drive because I already replaced it once to a non-Apple hard drive. Is there anything I haven't tried yet or should try again to try and get things going again?
Thanks so much.This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
Error in ABAP Mapping (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION)
Hi ,
Scenario: Manually Purchase Order is created, automatically Sales Order should be created in the Target System through PI,
I have used Message Mapping which is working fine for single Customer and Vendor,
For Multiple Customers and Vendors i am using one ZTABLE, Only Message Mapping is not sufficient to my requirement.
Now i am using both Message Mapping and ABAP Mapping at a time in Interface Mapping. I created the class and done the development., whene i run the scenario i am getting the error as below,
*<SAP:Stack>Error in mapping program ZCL_SD_IDTO_POSO (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference</SAP:Stack>*
*<SAP:Retry>M</SAP:Retry>*
*</SAP:Error>*
Please let me know.
Best Regards
VamsiHave u seen the ABAP mapping guide?
Refer this series to the ABAP mapping section.https:///people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
It will be very handy and useful. -
Random Kernel Errors and need to repair disk
After trying to partition for Bootcamp, the computer locked into a Kernel error. I went to validate the disk and discovered that I need to repair the disk. I have tried booting from my OSX installation disk to access the repair disk functionality. I receive a kernel error each and every time I try to boot from disk. Details as follows - please advise.
Interval Since Last Panic Report: -1127922 sec
Panics Since Last Report: 1
Anonymous UUID: F32AB6E4-83EA-45BF-9186-E23B077676E9
Sun Mar 13 21:26:16 2011
panic(cpu 1 caller 0x2a6ac2): Kernel trap at 0x581571fc, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x19703000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x06f75004
CR2: 0x00000018, EBP: 0x5786bc78, ESI: 0x07f29c00, EDI: 0x07f29c00
EFL: 0x00010246, EIP: 0x581571fc, CS: 0x00000008, DS: 0x00290010
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5786ba88 : 0x21acfa (0x5ce650 0x5786babc 0x223156 0x0)
0x5786bad8 : 0x2a6ac2 (0x590a50 0x581571fc 0xe 0x590c1a)
0x5786bbb8 : 0x29c968 (0x5786bbd0 0x7f16700 0x5786bc78 0x581571fc)
0x5786bbc8 : 0x581571fc (0xe 0x48 0x10 0x57860010)
0x5786bc78 : 0x580fbfb8 (0x0 0x7f16700 0x80deac0 0x810b140)
0x5786bc98 : 0x57d10189 (0x7f29c00 0x57d15304 0x80deac0 0x0)
0x5786bd08 : 0x57d0cb98 (0x7f29c00 0x5786bdcc 0x7501bb8 0x4a7632a3)
0x5786bd38 : 0x5330cf (0x7f29c00 0x7501bb8 0x7501bb8 0x0)
0x5786bd88 : 0x563a86 (0x7f29c00 0x7501bb8 0x7501bb8 0x0)
0x5786bde8 : 0x284883 (0x7f29c00 0x7501bb8 0x0 0x0)
0x5786be58 : 0x21d09c (0x6f00168 0x6f00284 0x6f0016c 0x6f001a4)
0x5786be98 : 0x210234 (0x6f00100 0x5786bedc 0x739bd74 0x5786bed0)
0x5786bef8 : 0x216497 (0x6f00100 0x0 0x0 0x0)
0x5786bf78 : 0x2922ba (0x74407e8 0x0 0x0 0x0)
0x5786bfc8 : 0x29d44d (0x74407e4 0x0 0x10 0x74407e4)
Kernel Extensions in backtrace (with dependencies):
com.apple.NVDAResman(6.0.0)@0x580f8000->0x5838bfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x50e3b000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x57cbd000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x57cff000
com.apple.iokit.IOGraphicsFamily(2.0)@0x57cff000->0x57d1cfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x50e3b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10A432
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 147336336486
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.InternalModemSupport 2.6.0
com.apple.driver.AppleTyMCEDriver 1.0.1d8
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AppleGraphicsControl 2.8.16
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleBacklight 170.0.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.GeForce 6.0.0
com.apple.driver.DiskImages.SparseDiskImage 281
com.apple.driver.DiskImages.ReadWriteDiskImage 281
com.apple.driver.DiskImages.UDIFDiskImage 281
com.apple.driver.DiskImages.RAMBackingStore 281
com.apple.driver.DiskImages.HTTPBackingStore 281
com.apple.driver.DiskImages.FileBackingStore 281
com.apple.driver.AppleUSBTCButtons 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.5.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.nvenet 1.0.58
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleProfileReadCounterAction 17 - last loaded 147290710663
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 73.0
com.apple.driver.AppleHDAPlatformDriver 1.7.4a1
com.apple.iokit.IOBluetoothSerialManager 2.2f18
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.4a1
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.iokit.AppleProfileFamily 40
com.apple.NVDAResman 6.0.0
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.DiskImages.KernelBacked 281
com.apple.driver.AppleUSBMultitouch 200.20
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2f18
com.apple.driver.AppleUSBBluetoothHCIController 2.2f18
com.apple.iokit.IOBluetoothFamily 2.2f18
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.0
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0The installation DVD is from another Mac, but is also Mac OSX 10.6
Is it required that I use the exact disk that shipped with my computer? (Go figure, it's in Minneapolis, I'm in Atlanta...).
The DVD however is in no way scratched or dirty. I will run the hardware test and report back.
Thank you for the leads. -
I recently bought a new MacBook 2 months ago. About a month or so after receiving it I began to receive kernel errors (the gray box with all the different languages in it). I bought the MacBook with 1GB RAM and a friend installed another 1GB for me (now it has 2GB). From things I have been reading, I am wondering if this is the cause of my kernel panics. It seems to happen mostly when I am using iChat. Everything else seems to be working fine. iChat freezes on me quite often. I have reformatted my computer once already and thought that things were going well until 20 minutes ago when I got a kernel error. I reformatted thinking that would solve my kernel error problems. I am not in the US right now and won't be able to take my MacBook into a store for another 6 weeks at the earliest. What should I do in the mean time? Should I reinstall the original RAM and then take the computer in when I get back to the states? Any advice would be appreciated... I am not that computer savvy. Thank you!
As pointed out by J.C., the most likely cause of your problem is the 3rd party RAM you've installed. Try replacing it with the original RAM that came with your system. This is exactly what the Apple techs will do if you take your machine to an Apple store. If the Kernel Panics stop, then this confirms that the 3rd party RAM was the cause. If not, you'll need to explore other options.
-
NT Kernel error 1256 and vturr.exe
Hi everybody!
I'm having troubles with my computer, 'cause when the system starts, shows the following messages:
NT kernel error 1256 KMODE exception not handled.
Then I get another windows and it says windows can not acess the path or file window/system32/vturr.exe
And the last one says error loading windows\system32\ruecxbga.dll.
And as consequences I'm having problems with internet explorer, and messenger. They appear sometimes as not installed, although they are and I have to install them again or they freeze.
Does anybody have any idea of how I should solve the problem??
Thanks a lot
VeroHi
A little bit more feedback can be useful. Which notebook model you have? I can not imagine that this kind of messages occurs without any reason. Have you done something strange last days?
Do you use your own OS installation or maybe is your notebook preinstalled with recovery media (factory settings)?
As Jimi already wrote, try to scan the HDD for possible viruses. -
IMac is rebooting itself after kernel error - Help!
I have no idea what happened. Today, for some reason, I received a kernel error that looks similar to this:
Darwin: Kernel Version 9.2.2
root: xnu-1228.4.31~1/Release _i386
System model name iMac 7.1
I noticed this happened right around the time that I was trying to install a firmware update.
When I start my computer, I hear a sound, the screen is white, and after a few seconds, I hear the sound again (sounds like chimes when you try to start your computer) and it tries to reboot again. It just keeps doing this over and over. I've put the Mac OS X disc in the iMac thinking that it would boot off of it but it doesn't and now I can't get the disc out. When I hold the mouse button down to do a force eject, nothing happens. It's as if the computer doesn't even recognize the keyboard or mouse.
I've tried zapping the pram and nvram earlier before all of this. It did let me to the desktop once but then it started updating and the firmware started updating and my computer got that kernel error again.
This is my first Mac product and I feel helpless and stuck. At least with a PC, I could format and start over. I have no idea what to do. Any suggestions?Hello alestian
Live and learn, over the past couple of years I've read many post were folks have failed to correctly follow the instructions installing a firmware update!
Have a look at: http://docs.info.apple.com/article.html?artnum=303364-en and read down to where it say's:
+In the unlikely case that your computer displays a black screen after starting up, you can restore your computer's firmware back to factory condition. Follow the directions here: to restore your firmware.+
here: http://docs.info.apple.com/article.html?artnum=303469
And then if you still can't get it going, take it to the nearest Apple Store or Apple Service Provider and explain someone fudged up the firmware update.
Dennis -
I can only use macbook pro in safe mode. Kernel Error
Can anyone help me get my MacBook Pro Mid 2009 15" back to normal?
This is the kernel error that keeps apperaing when I try to restart my mac book. My mac book was restarting originally because i was installing xcode. I am now seroiulsy regretting it.
panic(cpu 0 caller 0xffffff80184dc19e): Kernel trap at 0xffffff7f9927125d, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff8000002020, CR3: 0x000000001b366000, CR4: 0x0000000000000660
RAX: 0xffffff80189a4240, RBX: 0xffffff8025b88400, RCX: 0x0000000001510000, RDX: 0xffffff80230c0cf0
RSP: 0xffffff8092a33e00, RBP: 0xffffff8092a33e30, RSI: 0x0000000000010001, RDI: 0xffffff80230c0cf0
R8: 0x0000000000000000, R9: 0x0000000000000003, R10: 0x0000000000002130, R11: 0x0000000000000003
R12: 0xffffff8018b03490, R13: 0xffffff8018979200, R14: 0xffffff80230c7c00, R15: 0xffffff80230c7c01
RFL: 0x0000000000010206, RIP: 0xffffff7f9927125d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8000002020, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8092a33a90 : 0xffffff8018422f69
0xffffff8092a33b10 : 0xffffff80184dc19e
0xffffff8092a33ce0 : 0xffffff80184f3606
0xffffff8092a33d00 : 0xffffff7f9927125d
0xffffff8092a33e30 : 0xffffff7f992711cd
0xffffff8092a33e50 : 0xffffff801889297f
0xffffff8092a33ea0 : 0xffffff801889253f
0xffffff8092a33f30 : 0xffffff801888e119
0xffffff8092a33f70 : 0xffffff8018893093
0xffffff8092a33fb0 : 0xffffff80184d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.CHUDKernLib(365.0)[6564ADBD-4AA4-6317-E283-151737D9C2A7]@0xffff ff7f99270000->0xffffff7f99277fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000018200000
Kernel text base: 0xffffff8018400000
System model name: MacBookPro5,3 (Mac-F22587C8)
System uptime in nanoseconds: 53650245973
last loaded kext at 53207973194: com.apple.iokit.IOUserEthernet 1.0.0d1 (addr 0xffffff7f99b32000, size 40960)
loaded kexts:
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.iokit.CHUDProf 366
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.GeForceTesla 8.1.8
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.AppleBacklight 170.3.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.driver.AppleIRController 325.7
com.apple.BootCache 35
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.nvenet 2.0.21
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.security.quarantine 3
com.apple.nke.applicationfirewall 153
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.iokit.IOSurface 91
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.CHUDKernLib 365
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 7
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.iokit.IOReportFamily 21
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0grey_nathan,
try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does the kernel error still appear? -
I have a white macbook not quite sure of OS think 10.4.2, it was bought mid 2006 so not sure if this matches. Am at work so can't check right now.
The last couple of days keep getting the kernel error and sometimes it turns back on straight away, sometimes if remove battery and replace then it works but generally it just keeps repeating the same error.
I have never added any RAM or anything, the only thing i can think is someone downloaded TVUplayer onto my mac the other day so it came up on the desktop .exe and then couldn't be opened obviously and was put in the trashcan.
Does anyone have any ideas?
Thank youHome from work the computer is Mac OSX 10.4.11 1.83 GHz intel 512 MB 667MHz
Took many attempts to turn on computer with kernel panic message coming on over and over again, finally am on this computer. No panic logs as it happens as it is starting up, please can someone explain what is happening.
Many Thanks -
Kernel error when restructuring
Every time I try to restructure any Essbase database because of I have added or removed dimensions I get a message about an Essbase kernel error.Then I have to kill the esssrv.exe of the application that contains the database because I get a message from it telling 'Client commands are currently not being accepted'.What can I do? I need to add an attribute dimension to my database and I can't.Please help.Thank you.
It might be a good practice to add dimensions after exporting leaf level data out and saving them as a backup, clear the database, add the new dimension, reload and recalculate.Also, it is recommended not to changeany dense dimension members on a fully loaded cube. The restructuring would bevery time consuming and likely to crashthe server.NM
Maybe you are looking for
-
"Invalid Character" error when executing a 13KB query with ADO
Hello I want to execute a query using an ADO Recordset using the Open method. When calling this method, an ORA-911 "Invalid Character" raises. I can say that the SQL runs fine, because using the SQL*Plus utility it works. I have a 11g client installe
-
Dear LiveCycle Users, I desperatly need your help on that one... We are using PDF Forms (created using Adobe LiveCycle), these forms are injected with XML Date using LiveCycle servers. We need to compare to these forms between each other, but the bui
-
IS-Retail:1 step pricing
Hi All, Can anyone explain me what is 1 step pricing.in IS-Retail.tell me with full details the IMG and Easy Access settings.and any other settings required.Explain me clearly. reply soooooon Thanks mahi
-
Business rules execution error
Hi, I am facing an error with business rules and forms. We are having 6 folders and each folder relating to different departments and each department (folder) contains 5 forms. The same environment is in UAT server and Production server. The same UAT
-
Configuration error in PID synthesis step of control design assistant
Hello, I am exploring an evaluation version of NI LabVIEW Control Design Assistant 2011. For getting started with it ; I am using getting started tutorial provided in the labview signal express help. Upto the step of frequency domain analysi