Kernel Panic - Mid 2011 iMac
The last few days I've been returning to my iMac in the morning (I leave it asleep at night) to a KP report. Any suggestions?
Thanks!!
Interval Since Last Panic Report: 666992 sec
Panics Since Last Report: 3
Anonymous UUID: 4E90D635-3912-EC5E-BE2B-A0B8D0A98B2F
Thu Nov 22 05:11:28 2012
panic(cpu 1 caller 0xffffff800a6b7bd5): Kernel trap at 0xffffff7f8bce3032, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000cfff000, CR4: 0x00000000000606e0
RAX: 0xffffff7f8bce3026, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff81d18a3eb0, RBP: 0xffffff81d18a3ec0, RSI: 0x0000000000000000, RDI: 0xffffff802c58c000
R8: 0x0000000000000001, R9: 0xffffff81cb847968, R10: 0x0000000009b49f67, R11: 0x00000000ffffff81
R12: 0x0000000000a6899e, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000001
RFL: 0x0000000000010286, RIP: 0xffffff7f8bce3032, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff81d18a3b50 : 0xffffff800a61d626
0xffffff81d18a3bc0 : 0xffffff800a6b7bd5
0xffffff81d18a3d90 : 0xffffff800a6ce4ed
0xffffff81d18a3db0 : 0xffffff7f8bce3032
0xffffff81d18a3ec0 : 0xffffff7f8c445cea
0xffffff81d18a3ef0 : 0xffffff800aa472a8
0xffffff81d18a3f30 : 0xffffff800aa45daa
0xffffff81d18a3f80 : 0xffffff800aa45ed9
0xffffff81d18a3fb0 : 0xffffff800a6b26b7
Kernel Extensions in backtrace:
com.apple.AMDRadeonAccelerator(1.0)[D89E4100-9C89-3C99-B34B-F7790E1A0B8B]@0xfff fff7f8c43f000->0xffffff7f8c80cfff
dependency: com.apple.iokit.IOAcceleratorFamily(19.0.26)[409C5206-05B3-301D-995E-5B269A4EEF 5E]@0xffffff7f8c3ed000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8ad1b000
dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8b202000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8b1bf000
com.apple.kext.AMDFramebuffer(8.0)[4CD59A3C-4442-36CB-8026-2095FE6B032A]@0xffff ff7f8bcdb000->0xffffff7f8bcedfff
dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f8b12e000
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8ad1b000
dependency: com.apple.kext.AMDSupport(8.0.0)[7B2EC6D1-101A-3928-919E-337D6724752A]@0xffffff 7f8baf1000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8b1bf000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000a400000
Kernel text base: 0xffffff800a600000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 33040122477404
last loaded kext at 14553927151: com.apple.driver.AppleBluetoothHIDKeyboard 165.5 (addr 0xffffff7f8c104000, size 24576)
last unloaded kext at 193334052272: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f8af64000, size 65536)
loaded kexts:
com.avatron.AVExFramebuffer 1.7
com.avatron.AVExVideo 1.7
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleUSBAudio 2.9.0f6
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 2.7 GHz, 16 GB, SMC 1.72f2
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: Corsair Force 3 SSD, 120.03 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: FiiO USB DAC-E17, 0x1852, 0x50d0, 0xfd140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd130000 / 4
USB Device: Datacolor Spyder3, 0x085c, 0x0300, 0xfd131000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: PTZ-930, 0x056a (WACOM Co., Ltd.), 0x00b2, 0xfa130000 / 6
USB Device: AS2105, 0x174c (ASMedia Technology Inc.), 0x55aa, 0xfa120000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
Edward,
When you uninstalled
com.avatron.AVExFramebuffer 1.7
com.avatron.AVExVideo 1.7
Exactly what method did you follow to uninstall. Please be descriptive, remember we aren't there to see what you do or what you are doing.
My guess is you did not uninstall correctly and left trace amounts of these apps behind. You also haven't restarted in Safe Mode to reset some of the caches.
Similar Messages
-
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
-
Re-Installing Snow Leopard on a mid 2011 iMac
I have accidentally wiped the hard drive of a mid 2011 imac 27" there was no install DVD provided for this machine and a retail Snow Leopard disk will not boot, apparently I need 10.6.8 and the retail disk is only 10.6.3 is there any solution to this dilemma?
The machines (we have more then one) all came with SL but no install disks. When I boot with cmd-R it comes up with a globe icon and message - apple.com/support - 6002F. I am now convinced that these machines were so close to the Lion release and were probably intended for Lion but were shipped with SL. I have now tried everthing including Lion install from USB recovery stick created an another SL to Lion machine and this works to the point where after downloading all 3GB of Lion it just goes back to the beginning again! I tried 3 times - good thing we have fast broadband and it failed every time! I then tried restoring a SL and even a Lion clone from another similar Mac but kernel panic every time, tomorrow I will try the retail "Lion on USB" option but it looks like its off for repair as far as this MAC is concerned.
-
Sudden restarts while using bootable USB installer (mid-2011 iMac) - evidence of hardware problem?
Greetings:
For a couple of years I've been suffering from an issue reported in many threads: seemingly random shutdowns and restarts of my mid-2011 iMac. These can happen several times a day, or there can be a gap of weeks between occurences. I've searched the web and discussions.apple.com endlessly, and tried every conceivable solution. I've observed no consistent pre-restart pattern in Console. I've tried removing all unnecessary extensions and start-up programs. Fixed permissions, repaired HDD, many of the diagnostic procedures described by LINC (superuser on this forum). I would sometimes get temporary relief from periodic restart loops, by unplugging the computer and resetting PRAM, but this would not last long. I couldn't discern whether it is a software/conflict issue, or a hardware issue. Have run AHT in extended looping mode, several times, and found nothing wrong. Which caused me to keep thinking it must be a software issue. The last thing I've tried is a clean install of Yosemite, with full HDD erase, from bootable USB.
I did this successfully, restored files from Time Machine...but then a few hours later, a series of sudden restarts began, with 4 or 5 within a couple of hours. I decided to shutdown and restart using the bootable USB installer again, and run Disk Utility from it to check the HDD for errors.
But then, while booted up from the USB (and after running Disk Utility with a normal result): the computer suddenly turned off and restarted! And then it rebooted again into installer mode (i.e. running off the bootable USB), and I ran Disk Utility again and ...it happened again!
So what does this tell me? I am asking all of you for confirmation please. I am thinking this is a strong indication that whatever the issue is causing the restarts, it is hardware based, as the system was running off the bootable USB at the time, NOT using installed operating system or software. AND this reminded me of one other instance where the system had rebooted randomly, while I was in SAFE mode.
Would you agree that this is likely now pointing to a hardware issue? Is power supply the likely culprit? Or?? (and recalling that repeated AHT have showed nothing...). Is it worth trying to fix (out of warranty)?
thanks for any insights,
WarrenThese instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there. -
I have a 27in mid 2011 iMac and a 2006 mac mini
i have a 27in mid 2011 iMac and i have been given a 2006 mac mini i have no screen to see whats going on on the mini and there is no os onboard how do i get OS X on to the mini so i can get to use this with a tv with hdmi i have the mini dvi to vga connector and a vga to hdmi lead into a samsung 32in led tv, tv keeps saying not connected???
- You said "Apple dvi to via converter with a via to hdmi cable . What is a "via"? I think you mean VGA.
Just what VGA to HDMI cable to you have? VGA is analogue while HDMI is digital. The Mini DVi out is both analogue and digital (DVI-AD). You would need a converter to convert the analogue VGA to digital.
- Yes, when you boot up you should get a chime if the Mac is functional. The chime The sound indicates that diagnostic tests run immediately at startup have found no hardware or fundamental software problems.[1]
http://en.wikipedia.org/wiki/Macintosh_startup
Thus it appears the Mini also has a hardware problem.
Make an appointment at the Genius Bar of an Apple store. It is free.
Apple Retail Store - Genius Bar -
Is there a way to run a 2005 PreSonus Firebox(with the firewire) to a mid-2011 iMac 0SX 10.7.2? It says its no longer supporting Power PC? Anything I can do without spending more money on new equipment or a new computer? Please help me.
Nevermind, I got it working.
I ended up extracting the new vob within MPEG Streamclip, which gave me an m2v and an aiff audio. I multiplexed those two back together in FFMpegX which gave me a complete VIDEO_TS folder with BUP and IFO files I needed. -
is there a way to run a external ssd with my mid 2011 iMac hdd in a raid configuration and basically have a fusion drive
A Fusion Drive is not a RAID; it's a CoreStorage logical volume group. While it's technically possible to do as you suggest, there would be little or no benefit from it.
-
The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.
Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check. -
How do I restore my 27" mid-2011 iMac EXACTLY the way it was after hard disk replacement?
Hi all.
Recently received an email from Apple saying that the 1TB Seagate hard drive in my 27" mid-2011 iMac is apt to fail anytime. Apparently they used some bad hard drives in the mid-2011 27" iMacs which are problematic so they're offering me a free replacement to a brand new hard drive. I'll be sending in my iMac for the replacement sometime in the next few days.
In preparation for it, I've backed up my entire system using Time Machine into an external harddrive. The backup is up to date & includes all system files. I've also made a Lion install disk on an 8GB USB flash/pen drive using Carbon Copy Cloner.
My question is: When I get my iMac back after the hard disk replacement, will I be able to restore my iMac to EXACTLY the way it was before the replacement using the Time Machine backup & the Lion install disk that I've prepared? When I mean EXACTLY, I do mean EXACTLY, e.g I don't have to re-install all the programs I have, my settings for the programs I have will stay intact, everything is where it should be etc...i.e EXACTLY the way my iMac is right now.
If yes, how do I do it? I've read Pondini's guide: http://pondini.org/TM/14.html
However it is less than clear on certain points, e.g in my case, which one do I have to use to restore my system to the way it was...the Time Machine backups I have on the external HDD or the Lion install disk that I made using Carbon Copy Cloner? And how do I go about doing the restore?
I'd appreciate any & all help given. Thanks in advance!daniirwan wrote:
baltwo: Thanks for your input! I didn't think of wiping the old HDD before sending it in for the replacement..all those sensitive user data! One question: What's a FWHD?
Already answered. Just note that FW is much faster than USB. See http://help.bombich.com/kb/troubleshooting/how-long-should-the-clone-or-backup-t ake for details.
I already have CCC installed so I'll probably try it out. Are the steps outline here the one that I should do to restore the CCC clone when I get my Mac with the new HDD back? See: http://help.bombich.com/kb/overview/restoring-data-from-your-backup#full_volume_ restore
Yes.
Another question: while I'm booted on the backup/clone, and just after I've wiped the old HDD, how do I reinstall the OS to create a generic user account? Will I have to use a Lion install USB disk?
No. IIRC (if I remember correctly), you can either use a saved Lion installer (hopefully it exists on your backup/clone) or use the Recovery HD. If you have the USB stick w/Lion installer on it, use that. -
Mid-2011 iMac won't boot Win 8.1 (BC) w/ ACD 30 attached
I have a 27" mid-2011 iMac Core i7 with two external displays, an ACD 30" and a 20" HP. I spent a great deal of time watching Win 8.1 in a reboot loop after install (Apple Drivers installed fine), sometimes with vertical lines down the ACD 30 (nothing on the HP). (I didnt expect Win to notice the more than one DisplayPort screen.) Finally I disconnected the displays and I booted into 8.1 fine.
IS this a thing? Others share this experience?
Thats not the end of my Boot Camp woes, but that's all tied to this issue.
BPCan you provide details on how each these displays are connected?
From iMac (27-inch, Mid 2011) - Technical Specifications, you have two TB ports, which can support DP connections.
Please also see
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ) - Apple Support
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support (this not directly related). -
How do I migrate data from my 2003 iMac to my mid-2011 iMac?
Hi All,
I have a 2003 iMac and I want to migrate the iTunes, iPhoto, etc DBs to my new mid-2011 iMac. The 2003 iMac is the last one before they switched to the intel chip. It's Mac OS is version 10.5.4. That's as late as I can get it as they quit supporting the old chip after that.
I found a vid on mac-to-mac file migration online. It said to connect the two computers via firewire cable (done), start the new computer (done), start the old computer while holding down the T-key (done), and the old computer's hard drive will show up on the new computer finder window (did happen). Then it says to start Migration Assistant on the new computer (done), and follow directions. That's where I run into a problem. The Migration Assistant says "Looking for other computers" and it never finds the old iMac even though the old iMac's hard drive is visible in the new iMac's finder window. Note that I can click down through directories on the old iMac in the new iMac's finder window.
Any suggestions you can offer would be greatly appreciated.
Thanks much!Your old machine may too old for Migration Assistant to work. In that case your best bet is to set up the old machine in Target Disk Mode and then drag and drop your files to the new machine. You should only migrate data files, if you have applications on the old machine these should be manually installed on the new machine. If any of the old machine's apps are PPC (Power PC) based these will not run in Lion and will need to be upgraded or replaced prior to installing on the new machine. You can check what apps are PPC based by opening System Profiler (Applications - Utilities - System Profiler), click Applications on the left and then look in the Kind column. Applications that will run in Lion OK are Intel & Universal apps.
-
PC Games and peripherals on Windows 7 on Lion on mid-2011 iMac. Possible?
Sorry for the long marquee, but I want to get anecdotal-experience answers on this convoluted subject before I waste a couple months of my fairly-rapidly-closing life --carpe diem. all y'all -- on something that's doomed from the very start.
For reasons I can't quite fathom (relative installed population, maybe), there are very few racing sims -- none, as far as I'm concerned -- for the Mac. That's most def not true for the PC -- I've been a Mac-only user since 1989, but the PC has always been -- when working -- a pretty good gaming platform (ALL it's good for AFAIC), with tons of titles, and the ability to accomodate multi, MULTI-axis controllers, like force-feedback steering wheels with gas, brake, and clutch pedals, and gearshift. I know of nothing like that for the Mac, even if there were racing sims that would run on a Mac.
So here's what I need to know: if I had a Boot Camp partition on my home drive (Macintosh HD), with a 32-bit or 64-bit (full version) of Windows 7 Home Premium, Windows 7 Professional, or Windows 7 Ultimate (necessary for my Mid-2011 27" iMac running Lion or above) installed on that partition, could I then install PC racing sims on that Boot Camp Windows 7-whatever Platform, and be able to use multi-axis controllers, like a Thrustmaster wheel, pedal, and shifter set?
Please, if anyone has been able to do this, by whatever means, on a mid-2011 iMac running OS X 10.7.x or above, I'd be eternally grateful if you could share your experience.
Thanks!
BartSeeing as how there are about 117 different versions of 64-bit Windows 7 out there, is there any particular version that is more advantageous -- in the case of Microsoft products, that means less bug-ridden -- for use on Boot Camp? I've seen reasonably priced ($66) versions like this:
"Microsoft Windows 7 Home Premium 64-bit FULL - BRANDED"
But then the description consists of this mangled English:
"This product will be branded HP, Dell, etc. but will do a FULL install on any brand computer and includes a DVD and COA. This is only unique to branded? [sic -- BB] OEM Windows products and not to non branded OEM Windows products. If you are the person people always seem to ask for help when their computer isnt right you should be fine with this. If you are not that kind of user you may want to stick to a non branded oem. Once again this only applies to Mac users [really sic -- BB]."
This is the only part of the description on this product page that even mentions "Mac users," and I'm left wondering if this "FULL - BRANDED" 64-bit version of Windows 7 will work OK on a Boot Camp partition on an OS X 10.7.x -- 10.8.x iMac.
Knowing all too well what a rat's-nest Windows has been since it was first foisted upon an unsuspecting public in 1985, with security problems that, after nearly 30 years, have still not been addressed, I want a 64-bit version of Win 7 that's going to give me the least amount of grief on my Boot Camp partition.
As this thread seems to be pretty much a dead letter, as many discussion threads become after an answer is provided, should I create a new question titled:
"Which 64-bit version of Windows 7 will work best on a Boot Camp partition on an OS X 10.7.x -- 10.8.x iMac?"
Thanks again!
Bart -
Mid-2011 imac and original apogee duet. . .no likey each other?
So I recently got a mid-2011 Imac with Mountain Lion. Years ago I got an Apogee duet, a mac-specific firewire (400)-based audio interface for audio recording. I'd been using it with my 2008 imac just fine. When I hooked it up to this new one (today was the first time), I discovered that at reasonable input recording levels, I was getting some very nasty static-y/interference sounding mess. It's got to be the imac/apogee combo because I had all the audio stuff turned off and unplugged. I was simply monitoring the input signal via Adobe Audition. If you think it was noisy BECAUSE nothing was plugged in, it was just as noisy with a Sennheiser G2 wireless lav hooked up. I have tried going directly from the duet to the computer with a firewire 400 to 800 cable. I have the newest update for the Apogee/Maestro software for Mountain Lion. Anyone have experience with this stuff? Thanks.
Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. -
HT201343 I have a mid 2011 iMac and i do not see a AirPlay option on my device. Why?
I have a mid 2011 iMac and i do not see a AirPlay option on my device. Why?
Hi Fid
Your mac is fine but you need OS X 10.8 Mountain Lion or newer and your profile says you have OS X 10.7.5 Lion. You need to get ML as a purchase from the app store as mirror is a new feature with that OS.
The alternative is a third party app called airparrot.
Jules -
Using a Mid 2011 iMac as an external display.
Hello, I was wondering if it would be possible to use my Mid 2011 iMac as a external display for a PC.
In the interest of gaming I am looking for a new gaming PC and I would really like to use my iMac as the display because I still want to use the iMac.Yes, if it's a 27" model.
Target Display Mode 2011 & Later iMacs
iMac- How to use your iMac as a Target Display Mode display
Maybe you are looking for
-
I am trying to add my dad to my shared photo folder and every time he get's the invite and clicks the subscribe button it tells him the photo stream is no longer shared. Apple support says that if you get that message that the owner (me) must have re
-
I am using interop acrobat dll in one of my client , when trying to open a pdf file in acrobat X the following message appears : ''To view the flash technology content in this PDF, please install the version of flash player that supports Adobe reader
-
Synced Photos don't appear on my 2G iPod touch
Hi, Here is my problem. I own since 3 years an iPod touch 2G which I use a lot. I use to sync 4-5 recent photo albums from my iPhoto Library on it but since few days, photos don't appear on the Photos App in the iPod neither the bottom bar to navigat
-
I am having problems with the Shutting or restart option it wont take either command. What can I do to fix the problem?
-
Why system log information is displaying on bottom of device screen?
Hi All, I have 8220 device. OS is 4.6.0.293. Platform 4.1.0.100. It always display the system log information on device screen. is this RIM know issue? Thanks.