Kernel Panics When sleeping and waking.

I have had so many of these lately. Is this pretty common since 10.4.3? It kinda *****. I think it might have to do with the new safe sleep feature that was added. I have reset nvram, pram, pm, formated and installed tiger. But with 10.4.3 it just keeps kernel panicing. I am almost considering selling my laptop w/ my boxes copy of tiger for ppc, because applecare hasn't been too responsive in this matter.
What do I do? I thought it was probably apple's hardware that isn't solid enough, but I think it might just be the latest patch. So has anyone else ran into this? I have seen a bunch of similar posts, but everyone's experioence seems to be a little different. I always get that "Turn off your computer" kernel panic message in osx (yeah the cute multiligual BSOD, except it is pretty and grey).
Oh yeah, don't post all that "OSX kernel panic troubleshoot guide." I am not a newbie, I know all that stuff, and I have run most of the tests I can. I should try my copy of techtool though. But I just don't think it is hardware, and if it is then I am still sore with apple since they make the hardware too .

Is this pretty common since 10.4.3? It kinda *****. I think it might have to do with the new safe sleep feature that was added.
Time to come clean. Did you enable Safe Sleep following instructions such as these:
http://www.andrewescobar.com/archive/2005/11/11/how-to-safe-sleep-your-mac/
If so, then the most likely reason you're experiencing kernel panics is because you're running it on an unsupported system. Safe Sleep is (currently) only supported on the new 15" and 17" PowerBooks (with the high resolution displays).
If not, please post the latest entry in panic.log.
Matt

Similar Messages

Problems with kernel panics when sleeping since 10.6.8

Hi folks,
I installed 10.6.8 the day it was issued, and since then have had some very odd problems with sleeping my Mac Pro. Intermittently, it goes into a half-sleep state when I request sleep mode; the fans still spin, but the sleep light pulses. It refuses to wake up, requiring a hard reset. The console logs show:
Sleep: Drivers Failure Panic
The specific panic is:
panic(cpu X caller 0xffffff80002251fb): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x101, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-1504.15.3/osfmk/x86_64/pmap.c:2741
where cpu X varies between any one of the 6 cores.
So far, I've tried
Resetting the PRAM and SMC
Disabling a raft of sleep related options (Wake on Bluetooth, etc)
Reinstalling the 10.6.8 update via the Combo updater
Repairing disk permissions
Reinstalling from the factory DVD and re-running the combo updater
And no doubt other things I've forgotten. The only thing that seems to fix it is to not install 10.6.8; when I reinstalled 10.6.4 (the factory OS), it slept and woke fine 10 times. As soon as the combo update was installed, it started sleep crashing again after 4-5 attempts.
I'm assuming this is some rogue driver bug introduced in the .8 release, but I've not seen anyone else suffering the problem. I would roll back onto .7, but will obviously need .8 to install Lion when it arrives.
Does anyone have any suggestions that I've missed, or has anyone else seen this problem?
Thanks,
adamw

Woops, sorry - typo. I meant 5870 (Apple provided). As far as I know, I'm not running any 3rd party drivers. The only non-Apple kernel extensions loaded are Parallels, which I've unloaded (and the problem persisted).
I should also mention, the Apple Hardware Test passes the machine.
I'll check out those two forums and see if I can find anything. Thanks for the advice!
Edit: The whole panic log is...
Sat Jun 25 22:30:09 2011
panic(cpu 2 caller 0xffffff80002251fb): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x101, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-1504.15.3/osfmk/x86_64/pmap.c:2741
Backtrace (CPU 2), Frame : Return Address
0xffffff80db0db8a0 : 0xffffff8000204d15
0xffffff80db0db9a0 : 0xffffff80002251fb
0xffffff80db0dba10 : 0xffffff800022691f
0xffffff80db0dba90 : 0xffffff800021b545
0xffffff80db0dbb00 : 0xffffff80002184b1
0xffffff80db0dbc00 : 0xffffff80002188b3
0xffffff80db0dbc30 : 0xffffff80002a6813
0xffffff80db0dbd40 : 0xffffff800027522f
0xffffff80db0dbe10 : 0xffffff8000292b1b
0xffffff80db0dbe50 : 0xffffff8000205536
0xffffff80db0dbe80 : 0xffffff80002029eb
0xffffff80db0dbef0 : 0xffffff8000274176
0xffffff80db0dbf60 : 0xffffff80002c3095
0xffffff80db0dbfa0 : 0xffffff80002e4894
BSD process name corresponding to current thread: SystemUIServer
Mac OS version:
10K540
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 67602566330
unloaded kexts:
(none)
loaded kexts:
com.parallels.kext.prl_vnic          6.0 12090.660720 - last loaded 6124490875
com.parallels.kext.prl_netbridge          6.0 12090.660720
com.parallels.kext.prl_usb_connect          6.0 12090.660720
com.parallels.kext.prl_hid_hook          6.0 12090.660720
com.parallels.kext.prl_hypervisor          6.0 12090.660720
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleBluetoothMultitouch          54.3
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleHDA          2.0.5f13
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AppleMikeyDriver          2.0.5f13
com.apple.driver.AGPM          100.12.31
com.apple.driver.AudioAUUC          1.57
com.apple.kext.ATIFramebuffer          6.3.6
com.apple.driver.AppleUSBDisplays          289
com.apple.filesystems.msdosfs          1.6.3
com.apple.filesystems.ntfs          3.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleIntelPenrynProfile          9999
com.apple.driver.AppleIntelNehalemProfile          76
com.apple.driver.AppleIntelMeromProfile          76
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.ATIRadeonX3000          6.3.6
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AirPortBrcm43xx          423.91.27
com.apple.driver.AirPortBrcm43224          428.42.4
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.Intel82574L          2.1.8b1
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.12
com.apple.iokit.CHUDUtils          364
com.apple.iokit.CHUDProf          366
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.IOBluetoothHIDDriver          2.4.5f3
com.apple.driver.AppleMultitouchDriver          207.11
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f13
com.apple.driver.DspFuncLib          2.0.5f13
com.apple.driver.AppleProfileReadCounterAction          76
com.apple.driver.AppleProfileTimestampAction          76
com.apple.driver.AppleProfileThreadInfoAction          76
com.apple.driver.AppleUSBHIDKeyboard          141.5
com.apple.driver.AppleHIDKeyboard          141.5
com.apple.driver.AppleProfileRegisterStateAction          76
com.apple.driver.AppleProfileKEventAction          76
com.apple.driver.AppleProfileCallstackAction          76
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleUSBAudio          2.7.6f6
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.0.5f13
com.apple.iokit.IOHDAFamily          2.0.5f13
com.apple.iokit.AppleProfileFamily          76
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.IONDRVSupport          2.2
com.apple.kext.ATI5000Controller          6.3.6
com.apple.kext.ATISupport          6.3.6
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.XsanFilter          402.1
com.apple.driver.AppleUSBMergeNub          4.2.4
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.AppleFileSystemDriver          2.0
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOAHCISerialATAPI          1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.iokit.CHUDKernLib          365
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
It varies slightly (sometimes some extensions are unloaded, sometimes not). The BSD process name changes almost every time; anything from Window Server to Mail.

Kernel panic when waking PowerBook from sleep on a new network

I occasionally take my PowerBook from home to work, and lately there have been several instances of my PB having a kernel panic when I plug in the ethernet cable and wake it from sleep. I have not tested this extensively, but it seems to occur under the following conditions:
1. PB is disconnected from network location 1, and the lid is closed so that it goes to sleep.
2. PB is moved to network location 2, the ethernet cable at that location is plugged in, and then the computer lid is opened, causing the computer to awake from sleep.
3. The computer has a kernel panic immediately on awaking.
I believe, but am not absolutely positive, that this does not occur if I awake the computer first, and then plug in the ethernet cable. Unfortunately that order of doing things is counter-intuitive to me, as I tend to want to plug everything in before waking the computer up.
Possibly a factor: At my home location I have a manually assigned IP address and other location-specific settings, whereas at work I change the network settings to fully automatic once the computer starts up.

Hello DistantThunder
In most cases kernel panics are a result of a hardware error on some cases a software error.
I would suggest you look at an excellent procedure for resolving these issues on Dr Smoke's website.
http://www.thexlab.com/faqs/kernelpanics.html

Kernel Panic when waking from sleep mode., Kernel Panic when waking from sleep mode.

Hi,
I have an Imac 2.8 GHz Intel Core 2 Duo desktop which I have upgraded to lion.
Recently I keep getting kernel panics when waking from sleep mode and I cannot figure out what it is.
I am not very computer savy - I.e. I use a computer but don't know programming etc.
The computer then asks me to shut down and restart.
Any help would be much appreciated as this is driving me crazy.
An example of the latest kernel panic log as as follows:
Fri Jan 6 21:25:02 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff80002936b3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000020, CR3: 0x000000000f636000, CR4: 0x0000000000000660
RAX: 0x000000000006f9d8, RBX: 0xffffff800445d598, RCX: 0x0000000000000020, RDX: 0x0000000000019fd8
RSP: 0xffffff808073b520, RBP: 0xffffff808073b540, RSI: 0x000000002996b2ee, RDI: 0xffffff8003f83ce8
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800bf31788, R11: 0x0000000000009268
R12: 0xffffff800374c000, R13: 0xffffff800445d598, R14: 0x000000000006f9d8, R15: 0xffffff8003f83ce8
RFL: 0x0000000000010202, RIP: 0xffffff80002936b3, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0x0000000000000020, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff808073b1e0 : 0xffffff8000220702
0xffffff808073b260 : 0xffffff80002c266d
0xffffff808073b400 : 0xffffff80002d7a1d
0xffffff808073b420 : 0xffffff80002936b3
0xffffff808073b540 : 0xffffff800029383b
0xffffff808073b560 : 0xffffff800029485b
0xffffff808073b590 : 0xffffff800027e44b
0xffffff808073b5f0 : 0xffffff7f811a44dd
0xffffff808073b630 : 0xffffff7f811a36c4
0xffffff808073b760 : 0xffffff8000328517
0xffffff808073b7b0 : 0xffffff80002e823b
0xffffff808073b8a0 : 0xffffff80003170ce
0xffffff808073b8d0 : 0xffffff80002ec664
0xffffff808073b9e0 : 0xffffff80002f0229
0xffffff808073ba50 : 0xffffff80002f0265
0xffffff808073ba80 : 0xffffff80004e6833
0xffffff808073bb50 : 0xffffff8000316ca3
0xffffff808073bba0 : 0xffffff80005a6e29
0xffffff808073bc30 : 0xffffff8000265675
0xffffff808073bc80 : 0xffffff80002651f3
0xffffff808073bcc0 : 0xffffff800026a62f
0xffffff808073bdc0 : 0xffffff800026cdb4
0xffffff808073bf40 : 0xffffff80002c1f0b
0xffffff808073bfb0 : 0xffffff80002d7941
      Kernel Extensions in backtrace:
         com.apple.BootCache(33.0)[7D74A237-77EF-359F-B1E2-CB1E602E8B9F]@0xffffff7f811a2 000->0xffffff7f811aafff
BSD process name corresponding to current thread: corestoraged
Boot args: 0x0
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 46767492658
last loaded kext at 39979515424: com.apple.driver.AppleTyMCEDriver          1.0.2d2 (addr 0xffffff7f81930000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.1.3f7
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.kext.ATIFramebuffer          7.1.2
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleBacklight          170.1.9
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.ATIRadeonX2000          7.1.2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.1
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.CoreStorageFsck          182.10
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.0.1
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.iokit.AppleYukon2          3.2.2b1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleUSBEHCI          4.5.0
com.apple.driver.AirPortBrcm43224          500.36.11
com.apple.driver.AppleUSBUHCI          4.4.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1
com.apple.driver.AppleIntelCPUPowerManagement          167.0.0
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.AppleHDAHardwareConfigDriver          2.1.3f7
com.apple.driver.DspFuncLib          2.1.3f7
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleHDAController          2.1.3f7
com.apple.iokit.IOHDAFamily          2.1.3f7
com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.kext.ATI2600Controller          7.1.2
com.apple.kext.ATISupport          7.1.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleFileSystemDriver          13
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
com.apple.iokit.IOBluetoothFamily          4.0.1f4
com.apple.driver.CoreStorage          182.10
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOATAPIProtocolTransport          3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOUSBUserClient          4.5.3
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IO80211Family          411.1
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOUSBFamily          4.5.3
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          165.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.7
com.apple.iokit.IOACPIFamily          1.4
This is all double dutch to me.
Would anyone be able to help please???
Thank you very much !!
Dave

Hi, for other peoples information - I finally figured out the problem. It was actually a faulty RAM module which I had bought. I had upgraded from 2 to 4 gb of RAM using an approved type of RAM for my particular computer. Finally I removed one module of RAM (after doing nearly everything else under the sun including trying to reinstall the operating system and wipe the computer etc) and the computer worked fine.
Dave

Kernel panic when waking from sleep

My eMac (1Ghz, 256 Mb RAM, dual boot OS 9.2.2/OS X 10.2.8(upgraded from 10.2.4)) has a recurring but intermittent issue where it suffers from a kernel panic when waking from sleep.
In the past I managed to fix the issue by resetting PRAM and NVRAM, but this doesn't seem to work anymore.
Things I've found out until now:
- Apple Hardware Test and Techtool Deluxe can't find anything wrong (all tests are passed).
- No kernel panic log is written - apparently the kernel panic occurs before the log can be written.
- Crash appears to be network-related. My IP address and network card address are shown at the bottom of the panic window.
- After restarting, Finder windows revert to a state from two or three days ago...
- Login items aren't the problem. I removed them all - this doesn't make any difference.
- no weird things in the startup items folders, AFAIK.
I'm on the verge of reinstalling OS X, but I think I already did this a couple of years ago, and it didn't help.
Please help.
Thomas

Nominally, you'd download the OS X Update Combo 10.2.8 after reinstalling 10.2.4, then use Software Update to identify any additional security and other software updates. There was an issue with early builds of 10.2 failing the 10.2.8 udate if done directly, but working fine if one first updated to an intermediate version such as 10.2.6; I think that problem affected 10.2 through 10.2.3 and your 10.2.4 should be good to go directly to 10.2.8, but if there are any problems, you can go back to 10.2.4, then search the Apple Downloads link for 10.2.6, then 10.2.8
With 10.2.x, it's prudent to run Repair Permissions after each OS and security update before moving on to the next.

PowerBook wake on Sleep-then kernel panic when re-mounting External Drives

Hey all, I found a peculiar behavior with my PowerBook and my Lacie External Hard Drive. If I wake up my PowerBook from sleep, either by shaking the mouse, or opening the lid- the computer sometimes kernel panics when it attempts to re-recognize my partitioned 250 gig external hard drive. This seems to happen 1 out of every 5 times. The external is already mounted that I can tell upon waking; its just that it seems like it panics when it tries to recognize it again. Any one else experienced this? I've had this problem since I've had my external drive, and that probably dates back to 10.4.2. Thanks!

Hi, Zach.
You might want to try a different FireWire cable, a different FireWire port on your Mac (if available), or contact LaCie, the latter as the enclosure may be malfunctioning. Another potential problem area, although this also usually shows up as spontaneous dismounts of the FireWire drive, is the FireWire drive's power supply, i.e. its power brick, but that seems less likely here.
While it certainly seems like you've isolated the cause to the FireWire drive, you may also want to review my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Experiencing Kernel Panic when computer sleeps???

I have a late 2013 MBP... I recently updated my OS to 10.9.2 Immediately after updating my computer began experiencing kernel panics when it would sleep for various amounts of time (couldn't recognize a real pattern). After a few days the problem seemed to happen more frequently and eventually happened everytime the computer went to sleep. I contacted Apple Support and they have deduced that it is a hardware issue (doesn't make sense to me since it only started happening after a software update?). I did install an aftermarket SSD, so I thought perhaps that was the problem, so I installed a new one... to no avail, still experiencing the same problem. I've come up with a temporary solution... I simply have my computers settings adjusted so that my computer does not sleep. This obviously has not solved my problem, but is a temporary fix. Anybody have any ideas as to what is going on???? Thanks in advance!

The version of virtual box I have on my system may not be the most absolute current up to date, but it is certainly the mac os version. Besides, virtual box wasn't running. It's just a freebie alternative to Parallels allowing me to run windows. But again, unless I'm doing something in windows, virtual box isn't even fired up. It wasn't last night when I put the system to sleep.
How do I find the hardware test that came with my system? Is it on the install dvd? What's it called?
THANKS!!

Kernel panics when in sleep mode

I bought a macbook pro about a month ago. It first came with Mountain Lion installed on it. I began having kernel panics when I put the laptop into sleep mode by closing the lid. After some time I would open the lid to find that the laptop had rebooted with a kernel panic. This continued to sporadically happen. I called apple and went to the apple store. The mbp passed their hardware tests so they did a clean Yosemite installation. I am still having the kernel panics. They all look nearly identical. I'm not sure what could be causing this. Any ideas are appreciated.
*** Panic Report ***
panic(cpu 0 caller 0xffffff7faed8bbdb): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000144: CFG 0x0fd510de 0x00100406 0xc0000000, BAR0 0x104000000 0xffffff80ca10b000 0x0e7150a2, D0, P0/3\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.10.22/src/Appl eMuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff809fb8bba0 : 0xffffff802c12bda1
0xffffff809fb8bc20 : 0xffffff7faed8bbdb
0xffffff809fb8bd00 : 0xffffff7faccc8e38
0xffffff809fb8bdc0 : 0xffffff7facd932c6
0xffffff809fb8be00 : 0xffffff7facfc8acc
0xffffff809fb8be20 : 0xffffff7facccf80e
0xffffff809fb8bec0 : 0xffffff7facc7e8c0
0xffffff809fb8bee0 : 0xffffff802c6d95d5
0xffffff809fb8bf10 : 0xffffff7fac93f74d
0xffffff809fb8bf50 : 0xffffff7faee00bf4
0xffffff809fb8bf60 : 0xffffff7faee08cfb
0xffffff809fb8bf80 : 0xffffff802c21708b
0xffffff809fb8bfd0 : 0xffffff802c234d39
0xffffff80c5453d10 : 0xffffff7facd932c6
0xffffff80c5453d50 : 0xffffff7facf65f00
0xffffff80c5453d60 : 0xffffff7facd6758f
0xffffff80c5453d80 : 0xffffff7face0a0b7
0xffffff80c5453e00 : 0xffffff7faccb1612
0xffffff80c5453ec0 : 0xffffff7facc7ebc5
0xffffff80c5453f00 : 0xffffff802c15e759
0xffffff80c5453fb0 : 0xffffff802c2125b7
      Kernel Extensions in backtrace:
         com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000->0xffffff7fac952fff
         com.apple.driver.AppleACPIPlatform(3.1)[97299A71-6EDD-3AD9-AE1D-2F7B61E8AA72]@0 xffffff7faedfa000->0xffffff7faee58fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7facba9000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
         com.apple.driver.AppleMuxControl(3.10.22)[26F693CB-BFE8-33FA-9D1F-3F66FC016768] @0xffffff7faed7d000->0xffffff7faed90fff
            dependency: com.apple.driver.AppleGraphicsControl(3.10.22)[61967104-88AF-3605-82F5-A480A280 0A78]@0xffffff7faed75000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7facba9000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7facc1b000
            dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[65E3187E-949B-36E9-BA33-1B13ABB058 1A]@0xffffff7faed78000
         com.apple.nvidia.driver.NVDAResman(10.0.2)[887AA320-9757-3030-996B-2DA348C9F19A ]@0xffffff7facc78000->0xffffff7faceedfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[C0B8A85D-B32A-3F24-B4FC-B62B3BBF9E57]@0xff ffff7facc62000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7facc1b000
            dependency: com.apple.AppleGraphicsDeviceControl(3.10.22)[44D7223C-9628-3FEA-A3B8-27DE9E1CE 0C3]@0xffffff7facc72000
         com.apple.nvidia.driver.NVDAGK100Hal(10.0.2)[DC43029D-568A-3B7C-976B-E922C17F51 43]@0xffffff7facef9000->0xffffff7fad0a6fff
            dependency: com.apple.nvidia.driver.NVDAResman(10.0.2)[887AA320-9757-3030-996B-2DA348C9F19A ]@0xffffff7facc78000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7fac924000
Apparently the forum software here is preventing my from posting my entire log.

After doing a clean install of Yosemite this same kernel panic continued to happen and I started getting gpuRestarts as well. Finally they replaced my logic board at the apple store and so far no more panics. My google results lead me to believe this was a failing GPU.

Kernel Panic when I use hot corner to put display to sleep (twice)

As the title above says, for the second night in a row, my new iMac (2012) has had a kernel panic when I perform that action. I also turn off my magic mouse to save the batteries but I'm constantly doing both of these actions throughout the day when I know I'm not going to being using my iMac for some time. Both occurences happened on consecutive nights. Any help would be greatly appreciated
Interval Since Last Panic Report: 50222 sec
Panics Since Last Report:          1
Anonymous UUID:                    -
Tue Feb 26 04:19:38 2013
panic(cpu 1 caller 0xffffff800b8156b0): "Spinlock acquisition timed out: lock=0xffffff8034706638, lock owner thread=0xffffff8021d16000, current_thread: 0xffffff8021d16000, lock owner active on CPU 0x1, current owner: 0xffffff8021d16000"@/SourceCache/xnu/xnu-2050.20.9/osfmk/i386/locks_i386.c:363
Backtrace (CPU 1), Frame : Return Address
0xffffff80fd0bbce0 : 0xffffff800b81d626
0xffffff80fd0bbd50 : 0xffffff800b8156b0
0xffffff80fd0bbd70 : 0xffffff800b820b80
0xffffff80fd0bbda0 : 0xffffff800b810448
0xffffff80fd0bbdf0 : 0xffffff800b820df2
0xffffff80fd0bbe20 : 0xffffff800b84f0a1
0xffffff80fd0bbe60 : 0xffffff800b816d00
0xffffff80fd0bbeb0 : 0xffffff800b819f64
0xffffff80fd0bbee0 : 0xffffff800b818c97
0xffffff80fd0bbf00 : 0xffffff800b8a5c5e
0xffffff80fd0bbfb0 : 0xffffff800b8cd9ce
BSD process name corresponding to current thread: USB Print and St
Mac OS version:
12C3103
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 12:13:47 PDT 2012; root:xnu-2050.20.9~1/RELEASE_X86_64
Kernel UUID: 3F93B852-872F-3DF0-BCF8-46D48024C422
Kernel slide:     0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: iMac13,1 (Mac-00BE6ED71E35EB86)
System uptime in nanoseconds: 67275470613942
last loaded kext at 66457127051521: com.apple.driver.AppleProfileTimestampAction          97 (addr 0xffffff7f8dc46000, size 16384)
last unloaded kext at 34782554650228: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f8dbe4000, size 12288)
loaded kexts:
com.silex.driver.sxuptp          1.5.1
com.Cycling74.driver.Soundflower          1.6.3
com.apple.driver.AppleIntelProfile          97
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          75.19
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.2f9
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AGPM          100.12.81
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleHDA          2.3.5fc12
com.apple.driver.AppleMikeyDriver          2.3.5fc12
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.2f9
com.apple.GeForce          8.0.6
com.apple.driver.AppleIntelHD4000Graphics          8.0.6
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.13
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleIntelFramebufferCapri          8.0.6
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleSDXC          1.4.0
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBHub          5.5.0
com.apple.iokit.AppleBCM5701Ethernet          3.5.0b9
com.apple.driver.AirPort.Brcm4331          612.20.15
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBXHCI          1.5.1
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleProfileTimestampAction          97
com.apple.driver.AppleProfileThreadInfoAction          97
com.apple.driver.AppleProfileRegisterStateAction          97
com.apple.driver.AppleProfileReadCounterAction          97
com.apple.driver.AppleProfileKEventAction          97
com.apple.driver.AppleProfileCallstackAction          97
com.apple.iokit.AppleProfileFamily          97
com.apple.driver.IOBluetoothHIDDriver          4.1.2f9
com.apple.driver.AppleMultitouchDriver          235.29
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.5fc12
com.apple.nvidia.nvGK100hal          8.0.6
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.2f9
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.iokit.IOBluetoothFamily          4.1.2f9
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.AppleGraphicsControl          3.2.13
com.apple.NVDAResman          8.0.6
com.apple.driver.IOPlatformPluginFamily          5.3.0d47
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.5fc12
com.apple.iokit.IOHDAFamily          2.3.5fc12
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.driver.AppleUSBHIDKeyboard          170.2
com.apple.driver.AppleHIDKeyboard          170.2
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.9
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.0
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.AppleThunderboltNHI          1.6.3
com.apple.iokit.IOThunderboltFamily          2.1.8
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IOUSBUserClient          5.5.0
com.apple.iokit.IO80211Family          510.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.5.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: iMac13,1, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 2.9f5
Graphics: NVIDIA GeForce GT 640M, NVIDIA GeForce GT 640M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.15)
Bluetooth: Version 4.1.2f9 11046, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS541010A9E662, 1 TB
USB Device: External USB 3.0, 0x0480 (Toshiba America Info. Systems, Inc.), 0xd010, 0x14a00000 / 2
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0x1d110000 / 8
USB Device: iPod, apple_vendor_id, 0x129e, 0x1d113000 / 10
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0x1d112000 / 9
USB Device: hub_device, 0x0424 (SMSC), 0x2412, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 5
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: Desktop, 0x0bc2 (Seagate LLC), 0x3300, 0x1a130000 / 4
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3

Any or all of the following third-party system modifications may be contributing to your problem:
SX-Virtual Link
Soundflower
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes.

Kernel Panic when run virtual machine same time on VirtualBox and Parallels Desktop

Hi,
Like as the title of thread: "Kernel Panic when run virtual machine same time on VirtualBox and Parallels Desktop"
Please help me, below is report: http://pastebin.com/YpX13MYc
Version Parallels Desktop: 8.0.18608
Version VirtualBox: 4.2.16
Thanks alot!

It may also be one of these:
com.kerio.kext.kvnet 8.1.1
com.nvidia.CUDA 1.1.0
at.obdev.nke.LittleSnitch 2.5.3

MBP Kernel Panic when connecting to HDTV (DVI)

I have a 15" MacBook Pro that has been working perfectly since I got it. I tried today to connect it to my Hitachi 51" HDTV (via DVI) and got an instant Kernel Panic. I used my 15" Powerbook with this HDTV without any issues.
I've searched and found folks with kernel panics when waking their MBP if the RAM is faulty, but nothing at all about issues when connecting an external display. I am running with all the latest updates, firmware update, etc.
I don't have any problems connecting to a 23" Cinema display or to a 19" Samsung LCD, but I tried several times to connect to the HDTV and got a kernel panic each time. I changed resolutions on one try and still got the same issue (720x480 so the TV would see it as 480p). I even tried booting up with the display already connected and it kernel panic'd when it tried to switch into the full OS X GUI.
The specific error is in the panic.log is:
Sat Jun 10 16:23:48 2006
panic(cpu 0 caller 0x0019CAEF): Unresolved kernel trap (CPU 0, Type 0=divide error), registers:
CR0: 0x80010033, CR2: 0x35863000, CR3: 0x00d6e000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0x00000000, ECX: 0x251a36fc, EDX: 0x00000000
ESP: 0x251a360c, EBP: 0x251a36d8, ESI: 0x00000000, EDI: 0x00000000
EFL: 0x00010247, EIP: 0x0078ca44, CS: 0x00000008, DS: 0x0a8c0010
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.kext.ATINDRV(4.2.6)@0x771000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.3)@0x574000
dependency: com.apple.iokit.IONDRVSupport(1.4.3)@0x58f000
com.apple.iokit.IONDRVSupport(1.4.3)@0x58f000
dependency: com.apple.iokit.IOPCIFamily(2.0)@0x565000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.3)@0x574000
So definitely something with the graphics subsystem. Anyone have any hints?
MacBook Pro 2GHz 2GB RAM ATI x1600 256MB Mac OS X (10.4.6)

What happens if you boot from the DVD that came with the MBP instead of booting from your hard drive? It could have something to do with your configuration.

Kernel Panics when machine is idle

Good day all,
I just purchased my MacBook Pro last week -- 2.4 GHz. I am new to OS X. I have gotten these Kernel Panics when the machine has been left idle -- 30 minutes or more. Does anyone have any idea why I am getting this Kernel Panics? What does the panic log below revel about the problem?
Fri Aug 10 02:10:57 2007
panic(cpu 1 caller 0x001A4A55): Unresolved kernel trap (CPU 1, Type 27=Unknown), registers:
CR0: 0x80010033, CR2: 0x3e7e3000, CR3: 0x00c99000, CR4: 0x000006e0
EAX: 0x0000000a, EBX: 0x6d626572, ECX: 0x00000000, EDX: 0x01076e00
CR2: 0x3e7e3000, EBP: 0x2520bb18, ESI: 0x6d616769, EDI: 0x63216e75
EFL: 0x00000246, EIP: 0x3d69f8f1, CS: 0x00000008, DS: 0x3e7e0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2520b908 : 0x128d08 (0x3cc0a4 0x2520b92c 0x131de5 0x0)
0x2520b948 : 0x1a4a55 (0x3d24b8 0x1 0x1b 0x3cb56c)
0x2520ba58 : 0x19aeb4 (0x2520ba70 0x25200048 0x25200010 0x190010)
0x2520bb18 : 0x3cbbab86 (0x472dd18 0x0 0x472dd04 0x16d)
0x2520bbd8 : 0x3cbbb2de (0x472dd04 0x2520beb8 0x18 0x0)
0x2520bd38 : 0x3cbb7959 (0x472dd04 0xc0185401 0x2520beb8 0x6)
0x2520bd68 : 0x1f1668 (0xd000000 0xc0185401 0x2520beb8 0x81)
0x2520bda8 : 0x1e84a2 (0x2520bdd0 0x297 0x2520be08 0x4294bb8)
0x2520be08 : 0x1e02a3 (0x46e2210 0xc0185401 0x2520beb8 0x81)
0x2520be58 : 0x332ac8 (0x4277700 0xc0185401 0x2520beb8 0x4294bb8)
0x2520be88 : 0x350e24 (0x4277700 0xc0185401 0x2520beb8 0x4294bb8)
0x2520bf58 : 0x37ad83 (0x4294bb8 0x4244000 0x4244044 0x0)
0x2520bfc8 : 0x19b28e (0x4003120 0x0 0x10 0x0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffdf78
Kernel loadable modules in backtrace (with dependencies):
com.parallels.kext.vmmain(2.2)@0x3cbb6000
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
Wed Aug 15 23:20:02 2007
panic(cpu 1 caller 0x001A4A55): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x0000002b, CR3: 0x01344000, CR4: 0x000006e0
EAX: 0x03f3ef80, EBX: 0x00000018, ECX: 0x004b0958, EDX: 0xffffffff
CR2: 0x0000002b, EBP: 0x25873c48, ESI: 0x00000003, EDI: 0x04ea0f40
EFL: 0x00010202, EIP: 0x003c1ca8, CS: 0x00000008, DS: 0x01d30010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x25873a28 : 0x128d08 (0x3cc0a4 0x25873a4c 0x131de5 0x0)
0x25873a68 : 0x1a4a55 (0x3d24b8 0x1 0xe 0x3d1cdc)
0x25873b78 : 0x19aeb4 (0x25873b90 0x1 0x25873b98 0x38)
0x25873c48 : 0x3c1e04 (0x4ea0f40 0x410d800 0x0 0x3c205f)
0x25873c68 : 0x3c27fa (0x410d800 0x0 0x0 0x0)
0x25873ca8 : 0x3c2867 (0x410d800 0x4e96900 0x4e56140 0x197fa7)
0x25873ce8 : 0x38759c (0x40f6a40 0x0 0x25873d28 0x3c1f72)
0x25873d08 : 0x38adbb (0x3f90000 0x4e96a00 0x0 0x3f90000)
0x25873d28 : 0x3b23a8 (0x3f90000 0x4e96a00 0x25873d58 0x3bef49)
0x25873d78 : 0x188511 (0x3f90000 0x4eb44b4 0x4eb44c8 0x11cc32)
0x25873db8 : 0x12b4c3 (0x4eb76b4 0x4eb4498 0x0 0x0)
0x25873df8 : 0x124b17 (0x4eb7600 0x0 0x18 0x25873edc)
0x25873f08 : 0x195a42 (0x25873f44 0x0 0x0 0x0)
0x25873fc8 : 0x19b32e (0x4056f20 0x0 0x19e0b5 0x4056ba0) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb011e448
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
Thu Aug 16 18:53:07 2007
panic(cpu 1 caller 0x003BEE20): OSObject::refcount: Attempting to retain a freed object
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2591bbb8 : 0x128d08 (0x3cc0a4 0x2591bbdc 0x131de5 0x0)
0x2591bbf8 : 0x3bee20 (0x3f262c 0x3f2608 0x411cf64 0x4124200)
0x2591bc18 : 0x3c1cab (0x4327720 0x4b0958 0x38 0x3c1934)
0x2591bc48 : 0x3c1e04 (0x4416500 0x4124200 0x0 0x3c205f)
0x2591bc68 : 0x3c27fa (0x4124200 0x0 0x0 0x0)
0x2591bca8 : 0x3c2867 (0x4124200 0x5f13680 0x5f7b6c0 0x1628d8)
0x2591bce8 : 0x38759c (0x411dd80 0x0 0x2591bd28 0x3c1f72)
0x2591bd08 : 0x38adbb (0x410f480 0x428fa00 0x0 0x410f480)
0x2591bd28 : 0x3b23a8 (0x410f480 0x428fa00 0x2591bd58 0x3bef49)
0x2591bd78 : 0x188511 (0x410f480 0x8684eb4 0x8684ec8 0x11cc32)
0x2591bdb8 : 0x12b4c3 (0x867c7b4 0x8684e98 0x0 0x0)
0x2591bdf8 : 0x124b17 (0x867c700 0x0 0x18 0x2591bedc)
0x2591bf08 : 0x195a42 (0x2591bf44 0x0 0x0 0x0)
0x2591bfc8 : 0x19b32e (0x403be40 0x0 0x19e0b5 0x403be40) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb011e428
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386
Thu Aug 16 20:37:58 2007
panic(cpu 0 caller 0x001A4A55): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0x07ea2dc0, CR3: 0x01344000, CR4: 0x000006e0
EAX: 0x07ea2dc0, EBX: 0x00000028, ECX: 0x004b0958, EDX: 0x03f590a0
CR2: 0x07ea2dc0, EBP: 0x258f3c48, ESI: 0x00000005, EDI: 0x043539c0
EFL: 0x00010206, EIP: 0x04b6854a, CS: 0x00000008, DS: 0x00000010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x258f3a18 : 0x128d08 (0x3cc0a4 0x258f3a3c 0x131de5 0x0)
0x258f3a58 : 0x1a4a55 (0x3d24b8 0x0 0xe 0x3d1cdc)
0x258f3b68 : 0x19aeb4 (0x258f3b80 0x206 0x258f3bd8 0x1416ad)
0x258f3c48 : 0x3c1e04 (0x43539c0 0x4152ec0 0x0 0x3c205f)
0x258f3c68 : 0x3c27fa (0x4152ec0 0x0 0x0 0x0)
0x258f3ca8 : 0x3c2867 (0x4152ec0 0x4355b00 0x3ed7d00 0x1628d8)
0x258f3ce8 : 0x38759c (0x4147280 0x0 0x258f3d28 0x3c1f72)
0x258f3d08 : 0x38adbb (0x412d500 0x3efbd80 0x0 0x412d500)
0x258f3d28 : 0x3b23a8 (0x412d500 0x3efbd80 0x258f3d58 0x3bef49)
0x258f3d78 : 0x188511 (0x412d500 0x4b78eb4 0x4b78ec8 0x11cc32)
0x258f3db8 : 0x12b4c3 (0x4b78db4 0x4b78e98 0x0 0x0)
0x258f3df8 : 0x124b17 (0x4b78d00 0x0 0x18 0x258f3edc)
0x258f3f08 : 0x195a42 (0x258f3f44 0x0 0x0 0x0)
0x258f3fc8 : 0x19b32e (0x403f000 0x0 0x19e0b5 0x3eae6c8) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb011e538
Kernel version:
Darwin Kernel Version 8.10.1: Wed May 23 16:33:00 PDT 2007; root:xnu-792.22.5~1/RELEASE_I386

I unchecked the "put hard disk(s) to sleep when possible" option in the Energy Saver configuration under System Preferences and this seems to have solved the problem. I left it idle last night for hours and not problem. I will keep monitoring it.
In the mean time, if anyone knows how to read the panic log (or can suggest a tool to do so), please post a reply.
Kevin

What is wrong with my user account?? Why do I get kernel panic when restart

Hi there. I got Leopard and was quite unhappy (don't think it was meant for a powerbook). So I started using Tiger again, and I flip flopped once or twice after the update came out for Leopard, thinking/hoping it would fix my problems. It didn't. I have given up on Leopard.
But, now Tiger seems to have a few problems of its own. I get the kernel panic when I restart my computer (telling me to restart), so I have to hold down the power button to turn it off and then turn it back on. Not a big deal, but if it shouldn't be doing that, I don't want it to, ya know? Never did it before Leopard.
My user account seems to be dysfunctional when it comes to downloading plug-ins for safari or firefox. I had to create a new user account and download the plug in from that account and then drag it into the HD to use it on my user account. I repaired disk permissions and booted from Tiger and did the same thing on there. After that, my user account is still not able to download that plug-in without getting errors (256)?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
Thanks!

Leopard will work with your Powerbook, the question is, is all your software and hardware ready for it?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
You can start from a blank slate, but if you have a hardware problem that started to generate itself, a blank slate won't solve it. It is called an erase and install. The first thing to do is backup your data*:
http://www.macmaps.com/backup.html
Once that is done at least twice, we can start looking at solutions for kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation

Kernel panic when I try startx: edited again

I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
Any ideas :?:
If I just run xorgconfig no panic when I then run aticonfig etc panic.
For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver :?:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
/etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Eastern
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(radeon)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="normlx"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !kdm)
# End of file

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernel Panic when I try to install OSX 10.3. Can anyone help?

I bought this iMac recently. It has OS 10.2.? installed and OS 9.1. When I try to install OS 10.3 I get a Kernel Panic when it reboots to start the installation. I ran the Norton Disk Doctor it had over in OS9 -- said it fixed some things and now ok but I still get a Kernel Panic trying to install Panther. I just want to re-format the whole computer with 10.3 and get rid of 9. How can I do that?
Thanks.

KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew

Kernel Panics When sleeping and waking.

Similar Messages

Maybe you are looking for