Kernel26 2.6.28-3: touchpad doesn't move cursor, touchpad buttons work

I issued a "sudo pacman -Syu" today. The following are the packages which were updated:
[corey@sariss ~]$ ls -l /var/cache/pacman/pkg/ | grep 2009-01-16
-rw-r--r-- 1 root root 712494 2009-01-16 15:07 catalyst-8.12-3-i686.pkg.tar.gz
-rw-r--r-- 1 root root 53907 2009-01-16 15:07 hdparm-9.6-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 29295975 2009-01-16 15:07 kernel26-2.6.28-3-i686.pkg.tar.gz
-rw-r--r-- 1 root root 2868747 2009-01-16 15:07 klibc-1.5.15-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 10840 2009-01-16 15:07 klibc-extras-2.5-2-i686.pkg.tar.gz
-rw-r--r-- 1 root root 40272 2009-01-16 15:07 klibc-kbd-1.15.20080312-8-i686.pkg.tar.gz
-rw-r--r-- 1 root root 37579 2009-01-16 15:07 klibc-module-init-tools-3.5-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 104013 2009-01-16 15:07 klibc-udev-135-2-i686.pkg.tar.gz
-rw-r--r-- 1 root root 4467592 2009-01-16 15:07 man-pages-3.16-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 16341 2009-01-16 15:07 mkinitcpio-0.5.20-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 303734 2009-01-16 15:07 module-init-tools-3.5-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 500508 2009-01-16 15:06 pacman-3.2.2-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 33495 2009-01-16 15:07 pycairo-1.8.0-2-i686.pkg.tar.gz
-rw-r--r-- 1 root root 18718108 2009-01-16 15:08 qt-4.4.3-4-i686.pkg.tar.gz
-rw-r--r-- 1 root root 793 2009-01-16 15:08 rpmextract-1.0-3-i686.pkg.tar.gz
-rw-r--r-- 1 root root 22588028 2009-01-16 15:08 samba-3.2.7-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 13741159 2009-01-16 15:08 smbclient-3.2.7-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 405587 2009-01-16 15:07 sqlite3-3.6.9-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 114138 2009-01-16 15:08 tdb-3.2.7-1-i686.pkg.tar.gz
-rw-r--r-- 1 root root 221718 2009-01-16 15:08 xterm-239-1-i686.pkg.tar.gz
After updating and rebooting, I notice my laptop touchpad no longer works. A USB optical mouse does work, and the touchpad mouse buttons work, but I cannot use the touchpad to move the mouse whatsoever. I have hotplugging disabled in xorg.conf.
I don't have a clue which package could have affected this... any suggestions will be greatly appreciated.
[EDIT]: On a hunch, I rolled back to kernel26 2.6.27.10-1, and my touchpad is working again. Clearly this is a problem with the new kernel. Suggestions are still appreciated, as I'd like to stay up-to-date!
Last edited by cmtptr (2009-01-16 23:31:48)

My Elantech touchpad won't work in Arch Linux with the 2.6.28 kernel either. I get a bunch of garbage in the kernel messages like below:
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 - driver resynched.
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 - driver resynched.
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:36 feathers psmouse.c: Touchpad at isa0060/serio4/input0 - driver resynched.
Jan 18 15:35:37 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:37 feathers psmouse.c: Touchpad at isa0060/serio4/input0 - driver resynched.
Jan 18 15:35:37 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:37 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:37 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:37 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:37 feathers psmouse.c: Touchpad at isa0060/serio4/input0 lost sync at byte 4
Jan 18 15:35:37 feathers psmouse.c: issuing reconnect request
Jan 18 15:35:37 feathers input: PS/2 Generic Mouse as /class/input/input8
Jan 18 15:35:37 feathers psmouse.c: Failed to enable mouse on isa0060/serio1
I do not have an fdl file for the Synaptics driver. Is that necessary? Also, I'm wondering if this could be connected to Ubuntu Bug #34501.

Similar Messages

Why doesn't my on/off button work

Sometimes my on/off button doesn't work & it takes multiple tries to turn on or off. Is this normal?

Not normal. Your button may be defective. You have a 1 year warranty... take it in to Apple and let them look at it.

Why doesn't the back browser button work? It is a pain having to reload current pages and then i loose my site work

I am just having a lot of problems with firefox and am about ready to go back to I.E.
The '''''back browser button does not work '''''when i am viewing pages and i have to use that stupid reload button, and most time I end up loosing my work or page I was on.
I also can not get certain articles to c'''''ome up using the pdf program and the nitro pdf program '''''can not get loaded. i can not get updated to the the new 4.o version.
And my computer is a new touchsmart I recently bought. i am just getting tired of spending so much time trying to figure out what works and don't work and having to try to down load this and that.
I have the new windows 7 program loaded on this computer. I have tried to change some information over to windows 7 and the highest update I can see is windows 2000????
Ted Wolk

You have to either click and hold the back button or right click to access the drop down selection.

Why doesn't my on/off button work after mavericks install?

I installed Mavericks this past weekend and have not been able to shut off my Macbook Pro (Retina Display) since. The button seems to shut off the display, but the computer itself continues to run. It apparently goes to sleep after some period of time since the battery seems not to drain. With Mountain Lion I at least got a warning when I hit that button by mistake to ask if I really wanted to shut it down, but now it just goes.
Does anyone know what is happening and how to correct it?

Learn how the power button works in OS X Mavericks.
see
http://support.apple.com/kb/HT5869?viewlocale=en_US
If still a problem
Reset the SMC
http://support.apple.com/kb/HT3964

[Solved]Synaptics Touchpad not working at all on Fujitsu Siemens UH552

Hi,
I have just installed Arch on my Fujitsu Siemens UH552 laptop. Everything works except for the touchpad which seems to get loaded by Xorg, but when in X it doesn't work. I have tried both using /dev/input/event* and /dev/input/mouse0 as device paths, neither works.
xf86-input-evdev and xf86-input-synaptics are installed.
I have tried running both with the default 10-evdev.conf, with 10-synaptics.conf, with both, and without both.
TLDR SOLUTION: https://bbs.archlinux.org/viewtopic.php … 3#p1189603
My current 10-synaptics.conf:
Section "InputClass"
Identifier "Touchpad Catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "synaptics"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection
Xorg.0.log
[ 2275.127]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2275.130] X Protocol Version 11, Revision 0
[ 2275.131] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2275.132] Current Operating System: Linux corvo 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 2275.132] Kernel command line: root=/dev/sda2 rootflags=subvol=__active ro initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
[ 2275.134] Build Date: 27 August 2012 08:04:39AM
[ 2275.135]
[ 2275.136] Current version of pixman: 0.26.2
[ 2275.138] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2275.138] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2275.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 13:16:01 2012
[ 2275.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2275.144] (==) No Layout section. Using the first Screen section.
[ 2275.144] (==) No screen section available. Using defaults.
[ 2275.144] (**) |-->Screen "Default Screen Section" (0)
[ 2275.144] (**) | |-->Monitor "<default monitor>"
[ 2275.144] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2275.144] (**) | |-->Device "Intel Graphics"
[ 2275.144] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2275.144] (==) Automatically adding devices
[ 2275.144] (==) Automatically enabling devices
[ 2275.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2275.144] Entry deleted from font path.
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2275.144] Entry deleted from font path.
[ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2275.144] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2275.144] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2275.144] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2275.144] (II) Loader magic: 0x7c8b00
[ 2275.144] (II) Module ABI versions:
[ 2275.144] X.Org ANSI C Emulation: 0.4
[ 2275.144] X.Org Video Driver: 12.1
[ 2275.144] X.Org XInput driver : 16.0
[ 2275.144] X.Org Server Extension : 6.0
[ 2275.144] (--) PCI:*(0:0:2:0) 8086:0166:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
[ 2275.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2275.144] (II) LoadModule: "extmod"
[ 2275.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2275.145] (II) Module extmod: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension MIT-SCREEN-SAVER
[ 2275.145] (II) Loading extension XFree86-VidModeExtension
[ 2275.145] (II) Loading extension XFree86-DGA
[ 2275.145] (II) Loading extension DPMS
[ 2275.145] (II) Loading extension XVideo
[ 2275.145] (II) Loading extension XVideo-MotionCompensation
[ 2275.145] (II) Loading extension X-Resource
[ 2275.145] (II) LoadModule: "dbe"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2275.145] (II) Module dbe: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DOUBLE-BUFFER
[ 2275.145] (II) LoadModule: "glx"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2275.145] (II) Module glx: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (==) AIGLX enabled
[ 2275.145] (II) Loading extension GLX
[ 2275.145] (II) LoadModule: "record"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2275.145] (II) Module record: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.13.0
[ 2275.145] Module class: X.Org Server Extension
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension RECORD
[ 2275.145] (II) LoadModule: "dri"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2275.145] (II) Module dri: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.0.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension XFree86-DRI
[ 2275.145] (II) LoadModule: "dri2"
[ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.145] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.145] compiled for 1.12.4, module version = 1.2.0
[ 2275.145] ABI class: X.Org Server Extension, version 6.0
[ 2275.145] (II) Loading extension DRI2
[ 2275.145] (II) LoadModule: "intel"
[ 2275.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2275.146] (II) Module intel: vendor="X.Org Foundation"
[ 2275.146] compiled for 1.12.3.901, module version = 2.20.5
[ 2275.146] Module class: X.Org Video Driver
[ 2275.146] ABI class: X.Org Video Driver, version 12.1
[ 2275.146] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
[ 2275.146] (--) using VT number 7
[ 2275.149] drmOpenDevice: node name is /dev/dri/card0
[ 2275.149] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 7, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 7
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 2275.150] drmOpenDevice: node name is /dev/dri/card0
[ 2275.150] drmOpenDevice: open result is 8, (OK)
[ 2275.150] drmOpenByBusid: drmOpenMinor returns 8
[ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 2275.150] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2275.150] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2275.150] (==) intel(0): RGB weight 888
[ 2275.150] (==) intel(0): Default visual is TrueColor
[ 2275.150] (**) intel(0): Option "AccelMethod" "sna"
[ 2275.150] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 2275.151] (**) intel(0): Framebuffer tiled
[ 2275.151] (**) intel(0): Pixmaps tiled
[ 2275.151] (**) intel(0): 3D buffers tiled
[ 2275.151] (**) intel(0): Throttling enabled
[ 2275.151] (**) intel(0): Delayed flush enabled
[ 2275.151] (**) intel(0): "Tear free" disabled
[ 2275.151] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2275.151] (II) intel(0): Output LVDS1 has no monitor section
[ 2275.152] (II) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 2275.152] (II) intel(0): Output VGA1 has no monitor section
[ 2275.153] (II) intel(0): Output HDMI1 has no monitor section
[ 2275.193] (II) intel(0): Output DP1 has no monitor section
[ 2275.193] (II) intel(0): EDID for output LVDS1
[ 2275.193] (II) intel(0): Manufacturer: LGD Model: 371 Serial#: 0
[ 2275.193] (II) intel(0): Year: 2012 Week: 0
[ 2275.193] (II) intel(0): EDID Version: 1.3
[ 2275.193] (II) intel(0): Digital Display Input
[ 2275.193] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 2275.193] (II) intel(0): Gamma: 2.20
[ 2275.193] (II) intel(0): No DPMS capabilities specified
[ 2275.193] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2275.193] (II) intel(0): First detailed timing is preferred mode
[ 2275.193] (II) intel(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555
[ 2275.193] (II) intel(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
[ 2275.193] (II) intel(0): Manufacturer's mask: 0
[ 2275.193] (II) intel(0): Supported detailed timing:
[ 2275.193] (II) intel(0): clock: 70.0 MHz Image Size: 293 x 165 mm
[ 2275.193] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0
[ 2275.193] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0
[ 2275.193] (II) intel(0): LG Display
[ 2275.193] (II) intel(0): LP133WH2-TLF1
[ 2275.193] (II) intel(0): EDID (in hex):
[ 2275.193] (II) intel(0): 00ffffffffffff0030e4710300000000
[ 2275.193] (II) intel(0): 00160103801d10780afc359658578e29
[ 2275.193] (II) intel(0): 1f505400000001010101010101010101
[ 2275.193] (II) intel(0): 010101010101581b566e500016302424
[ 2275.194] (II) intel(0): 480025a5100000190000000000000000
[ 2275.194] (II) intel(0): 00000000000000000000000000fe004c
[ 2275.194] (II) intel(0): 4720446973706c61790a2020000000fe
[ 2275.194] (II) intel(0): 004c503133335748322d544c463100ce
[ 2275.194] (II) intel(0): EDID vendor "LGD", prod id 881
[ 2275.194] (II) intel(0): Printing DDC gathered Modelines:
[ 2275.194] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 2275.194] (II) intel(0): Printing probed modes for output LVDS1
[ 2275.194] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
[ 2275.194] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2275.194] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2275.194] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2275.194] (II) intel(0): EDID for output VGA1
[ 2275.195] (II) intel(0): EDID for output HDMI1
[ 2275.236] (II) intel(0): EDID for output DP1
[ 2275.236] (II) intel(0): Output LVDS1 connected
[ 2275.236] (II) intel(0): Output VGA1 disconnected
[ 2275.236] (II) intel(0): Output HDMI1 disconnected
[ 2275.236] (II) intel(0): Output DP1 disconnected
[ 2275.236] (II) intel(0): Using exact sizes for initial modes
[ 2275.236] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 2275.236] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2275.236] (**) intel(0): Display dimensions: (290, 160) mm
[ 2275.236] (**) intel(0): DPI set to (119, 121)
[ 2275.236] (II) Loading sub module "dri2"
[ 2275.236] (II) LoadModule: "dri2"
[ 2275.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2275.237] (II) Module dri2: vendor="X.Org Foundation"
[ 2275.237] compiled for 1.12.4, module version = 1.2.0
[ 2275.237] ABI class: X.Org Server Extension, version 6.0
[ 2275.237] (==) Depth 24 pixmap format is 32 bpp
[ 2275.237] (II) intel(0): SNA initialized with IvyBridge backend
[ 2275.237] (==) intel(0): Backing store disabled
[ 2275.237] (==) intel(0): Silken mouse enabled
[ 2275.237] (II) intel(0): HW Cursor enabled
[ 2275.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2275.238] (==) intel(0): DPMS enabled
[ 2275.239] (II) intel(0): [DRI2] Setup complete
[ 2275.239] (II) intel(0): [DRI2] DRI driver: i965
[ 2275.239] (II) intel(0): direct rendering: DRI2 Enabled
[ 2275.239] (==) intel(0): hotplug detection: "enabled"
[ 2275.239] (--) RandR disabled
[ 2275.239] (II) Initializing built-in extension Generic Event Extension
[ 2275.239] (II) Initializing built-in extension SHAPE
[ 2275.239] (II) Initializing built-in extension MIT-SHM
[ 2275.239] (II) Initializing built-in extension XInputExtension
[ 2275.239] (II) Initializing built-in extension XTEST
[ 2275.239] (II) Initializing built-in extension BIG-REQUESTS
[ 2275.239] (II) Initializing built-in extension SYNC
[ 2275.239] (II) Initializing built-in extension XKEYBOARD
[ 2275.239] (II) Initializing built-in extension XC-MISC
[ 2275.239] (II) Initializing built-in extension SECURITY
[ 2275.239] (II) Initializing built-in extension XINERAMA
[ 2275.239] (II) Initializing built-in extension XFIXES
[ 2275.239] (II) Initializing built-in extension RENDER
[ 2275.239] (II) Initializing built-in extension RANDR
[ 2275.239] (II) Initializing built-in extension COMPOSITE
[ 2275.239] (II) Initializing built-in extension DAMAGE
[ 2275.250] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2275.250] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2275.250] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2275.250] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2275.250] (II) AIGLX: Loaded and initialized i965
[ 2275.250] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2275.251] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[ 2275.276] (II) intel(0): Setting screen physical size to 361 x 203
[ 2275.319] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 2275.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.319] (II) LoadModule: "evdev"
[ 2275.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2275.320] (II) Module evdev: vendor="X.Org Foundation"
[ 2275.320] compiled for 1.12.3.901, module version = 2.7.3
[ 2275.320] Module class: X.Org XInput Driver
[ 2275.320] ABI class: X.Org XInput driver, version 16.0
[ 2275.320] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.320] (**) Power Button: always reports core events
[ 2275.320] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 2275.320] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.320] (--) evdev: Power Button: Found keys
[ 2275.320] (II) evdev: Power Button: Configuring as keyboard
[ 2275.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 2275.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2275.320] (**) Option "xkb_rules" "evdev"
[ 2275.320] (**) Option "xkb_model" "evdev"
[ 2275.320] (**) Option "xkb_layout" "se"
[ 2275.355] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event3)
[ 2275.356] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
[ 2275.356] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
[ 2275.356] (**) Fujitsu FUJ02E3: always reports core events
[ 2275.356] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event3"
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
[ 2275.356] (--) evdev: Fujitsu FUJ02E3: Found keys
[ 2275.356] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
[ 2275.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input3/event3"
[ 2275.356] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
[ 2275.356] (**) Option "xkb_rules" "evdev"
[ 2275.356] (**) Option "xkb_model" "evdev"
[ 2275.356] (**) Option "xkb_layout" "se"
[ 2275.357] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 2275.357] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2275.357] (II) Using input driver 'evdev' for 'Video Bus'
[ 2275.357] (**) Video Bus: always reports core events
[ 2275.357] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 2275.357] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2275.357] (--) evdev: Video Bus: Found keys
[ 2275.357] (II) evdev: Video Bus: Configuring as keyboard
[ 2275.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
[ 2275.357] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 2275.358] (**) Option "xkb_rules" "evdev"
[ 2275.358] (**) Option "xkb_model" "evdev"
[ 2275.358] (**) Option "xkb_layout" "se"
[ 2275.359] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event2)
[ 2275.359] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
[ 2275.359] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
[ 2275.359] (**) Fujitsu FUJ02B1: always reports core events
[ 2275.359] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event2"
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
[ 2275.359] (--) evdev: Fujitsu FUJ02B1: Found keys
[ 2275.359] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
[ 2275.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input2/event2"
[ 2275.359] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
[ 2275.359] (**) Option "xkb_rules" "evdev"
[ 2275.359] (**) Option "xkb_model" "evdev"
[ 2275.359] (**) Option "xkb_layout" "se"
[ 2275.360] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 2275.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2275.360] (II) Using input driver 'evdev' for 'Power Button'
[ 2275.360] (**) Power Button: always reports core events
[ 2275.360] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 2275.360] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2275.360] (--) evdev: Power Button: Found keys
[ 2275.360] (II) evdev: Power Button: Configuring as keyboard
[ 2275.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 2275.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
[ 2275.361] (**) Option "xkb_rules" "evdev"
[ 2275.361] (**) Option "xkb_model" "evdev"
[ 2275.361] (**) Option "xkb_layout" "se"
[ 2275.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 2275.362] (II) No input driver specified, ignoring this device.
[ 2275.362] (II) This device may have been added with another device file.
[ 2275.362] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
[ 2275.362] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
[ 2275.362] (II) Using input driver 'evdev' for 'FJ Camera'
[ 2275.362] (**) FJ Camera: always reports core events
[ 2275.362] (**) evdev: FJ Camera: Device: "/dev/input/event7"
[ 2275.363] (--) evdev: FJ Camera: Vendor 0x10f1 Product 0x1a44
[ 2275.363] (--) evdev: FJ Camera: Found keys
[ 2275.363] (II) evdev: FJ Camera: Configuring as keyboard
[ 2275.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input7/event7"
[ 2275.363] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11)
[ 2275.363] (**) Option "xkb_rules" "evdev"
[ 2275.363] (**) Option "xkb_model" "evdev"
[ 2275.363] (**) Option "xkb_layout" "se"
[ 2275.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.364] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 2275.364] (II) No input driver specified, ignoring this device.
[ 2275.364] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 2275.365] (II) No input driver specified, ignoring this device.
[ 2275.365] (II) This device may have been added with another device file.
[ 2275.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2275.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2275.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2275.366] (**) AT Translated Set 2 keyboard: always reports core events
[ 2275.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2275.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2275.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2275.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2275.366] (**) Option "xkb_rules" "evdev"
[ 2275.366] (**) Option "xkb_model" "evdev"
[ 2275.366] (**) Option "xkb_layout" "se"
[ 2275.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 2275.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad Catchall"
[ 2275.366] (II) LoadModule: "synaptics"
[ 2275.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 2275.367] (II) Module synaptics: vendor="X.Org Foundation"
[ 2275.367] compiled for 1.12.2, module version = 1.6.2
[ 2275.367] Module class: X.Org XInput Driver
[ 2275.367] ABI class: X.Org XInput driver, version 16.0
[ 2275.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "Device" "/dev/input/event8"
[ 2275.367] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2275.367] (**) Option "TapButton1" "1"
[ 2275.367] (**) Option "TapButton2" "2"
[ 2275.367] (**) Option "TapButton3" "3"
[ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2275.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 2275.368] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2275.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2275.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
[ 2275.368] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 2275.368] (II) No input driver specified, ignoring this device.
[ 2275.368] (II) This device may have been added with another device file.
xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Fujitsu FUJ02E3 id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Fujitsu FUJ02B1 id=9 [slave keyboard (3)]
↳ Power Button id=10 [slave keyboard (3)]
↳ FJ Camera id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
running
dmesg | grep -i synaptics
doesn't show anything. However running
dmesg | grep -i psmouse
returns a lot of
psmouse serio1: bad data from KBC - timeout
Last edited by flako (2012-11-08 09:44:59)

I have tried doing that with both linux mint, and now fedora live usb. Neither one loads the touchpad correctly. So yeah, our problems weren't really related
Anyway, I tried looking into the
psmouse serio1: bad data from KBC - timeout
messages, and tried running psmouse proto (defined in /etc/modprobe.conf/psmouse.conf) as both raw and imps as per https://answers.launchpad.net/ubuntu/+s … ion/206950 Unfortunately, that didn't solve anything. Using the raw setting meant that the touchpad wasn't loaded at all (as in not appearing in the Xorg.log at all).
The laptop is quite new, but at the same time what i figured from the touchpad vendor & product ID, the touchpad itself isn't. So it should technically work. Before installing arch i booted into windows to see if everything worked, and found no issues with the touchpad. So I have ruled out any hardware errors. Maybe its just the Fn-key that doesn't work yet in Linux? But that doesn't explain the "psmouse serio1: bad data from KBC - timeout" Any pointers to where I should look/ what commands I should run to delve deeper into this issue?
Last edited by flako (2012-09-09 12:10:51)

Touchpad not working after suspend/resume on Asus R409LD

Hello,
I have installed Arch on my Asus laptop and I had issues with the FocalTech touchpad being detected as a generic mouse. This problem is now fixed in the mainline kernel which I use (cf https://wiki.archlinux.org/index.php/AS … #Touch_Pad).
However I still have a problem : when I suspend/resume my laptop, the touchpad ceases working.
Here is the output of xinput before suspending :
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ FocalTechPS/2 FocalTech FocalTech Touchpad id=13 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Sleep Button id=9 [slave keyboard (3)]
↳ USB Camera id=10 [slave keyboard (3)]
↳ Asus WMI hotkeys id=11 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
I tried deactivating and reactivating psmouse but it doesn't work.
Wierdly, the touchpad is still listed by xinput after resuming, but doesn't work. And when I disable/enable psmouse it disappears from the output.
Here is a full dmseg with suspend/resume if it may help :
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-mainline (auguste@hal) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Mar 14 14:53:37 CET 2015
[ 0.000000] Command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba85b000-0x00000000c98b4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xba86a018-0xba877e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b9d7dfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000b9d7e000-0x00000000b9d84fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000b9d85000-0x00000000ba5dafff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba5db000-0x00000000ba85afff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ba85b000-0x00000000ba86a017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba86a018-0x00000000ba877e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ba877e58-0x00000000c98b4fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c98b5000-0x00000000c9ac9fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000c9aca000-0x00000000c9e0efff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000c9e0f000-0x00000000cab1cfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000cab1d000-0x00000000caffefff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001af1fffff] usable
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xc9e93000 ACPI 2.0=0xc9e93000 SMBIOS=0xcaf46318
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem05: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e39000) (14MB)
[ 0.000000] efi: mem08: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e39000-0x000000007fc02000) (2013MB)
[ 0.000000] efi: mem09: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007fc02000-0x0000000080000000) (3MB)
[ 0.000000] efi: mem10: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000080000000-0x00000000b687a000) (872MB)
[ 0.000000] efi: mem11: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b687a000-0x00000000b697a000) (1MB)
[ 0.000000] efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b697a000-0x00000000b7f44000) (21MB)
[ 0.000000] efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000b7f44000-0x00000000b7f45000) (0MB)
[ 0.000000] efi: mem14: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b7f45000-0x00000000b9d7e000) (30MB)
[ 0.000000] efi: mem15: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000b9d7e000-0x00000000b9d85000) (0MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b9d85000-0x00000000b9ed9000) (1MB)
[ 0.000000] efi: mem17: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000b9ed9000-0x00000000ba59b000) (6MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba59b000-0x00000000ba5b8000) (0MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000ba5b8000-0x00000000ba5d2000) (0MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba5d2000-0x00000000ba5db000) (0MB)
[ 0.000000] efi: mem21: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000ba5db000-0x00000000ba85b000) (2MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba85b000-0x00000000ba86a000) (0MB)
[ 0.000000] efi: mem23: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000ba86a000-0x00000000ba879000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba879000-0x00000000c72f8000) (202MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c72f8000-0x00000000c735c000) (0MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c735c000-0x00000000c7375000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c7375000-0x00000000c7395000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c7395000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c73a5000-0x00000000c74af000) (1MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c74af000-0x00000000c74b0000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000c74b0000-0x00000000c8c37000) (23MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c8c37000-0x00000000c95f3000) (9MB)
[ 0.000000] efi: mem33: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000c95f3000-0x00000000c98b5000) (2MB)
[ 0.000000] efi: mem34: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c98b5000-0x00000000c9a55000) (1MB)
[ 0.000000] efi: mem35: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000c9a55000-0x00000000c9aca000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000c9aca000-0x00000000c9e0f000) (3MB)
[ 0.000000] efi: mem37: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000c9e0f000-0x00000000caad9000) (12MB)
[ 0.000000] efi: mem38: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caad9000-0x00000000caaf9000) (0MB)
[ 0.000000] efi: mem39: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caaf9000-0x00000000caafd000) (0MB)
[ 0.000000] efi: mem40: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000caafd000-0x00000000cab00000) (0MB)
[ 0.000000] efi: mem41: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000cab00000-0x00000000cab1d000) (0MB)
[ 0.000000] efi: mem42: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cab1d000-0x00000000cae70000) (3MB)
[ 0.000000] efi: mem43: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000cae70000-0x00000000caea7000) (0MB)
[ 0.000000] efi: mem44: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea7000-0x00000000caea9000) (0MB)
[ 0.000000] efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caea9000-0x00000000caf48000) (0MB)
[ 0.000000] efi: mem46: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf48000-0x00000000caf6c000) (0MB)
[ 0.000000] efi: mem47: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000caf6c000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000001af200000) (2802MB)
[ 0.000000] efi: mem50: [Reserved |RUN| | | | | | | | ] range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem51: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem52: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem53: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem54: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem55: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem56: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. X450LD/X450LD, BIOS X450LD.208 06/11/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0180000000 mask 7FC0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 01B0000000 mask 7FF0000000 uncachable
[ 0.000000] 8 base 01AF800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 01AF400000 mask 7FFFC00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
[ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1a0000000-0x1aeffffff]
[ 0.000000] [mem 0x1a0000000-0x1aeffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x19fffffff]
[ 0.000000] [mem 0x180000000-0x19fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9d7dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb9bfffff] page 2M
[ 0.000000] [mem 0xb9c00000-0xb9d7dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9d85000-0xba5dafff]
[ 0.000000] [mem 0xb9d85000-0xb9dfffff] page 4k
[ 0.000000] [mem 0xb9e00000-0xba3fffff] page 2M
[ 0.000000] [mem 0xba400000-0xba5dafff] page 4k
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba85b000-0xc98b4fff]
[ 0.000000] [mem 0xba85b000-0xba9fffff] page 4k
[ 0.000000] [mem 0xbaa00000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98b4fff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9aca000-0xc9e0efff]
[ 0.000000] [mem 0xc9aca000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e0efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7fc02000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9E93000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9E93090 0000AC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EA9800 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9E93258 0165A6 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB1BF80 000040
[ 0.000000] ACPI: APIC 0x00000000C9EA9910 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EA9988 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EA99D0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: LPIT 0x00000000C9EA9A98 000094 (v01 ALASKA 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9B30 000174 (v01 Intel zpoddult 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EA9CA8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAA1E8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000C9EAACC0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000C9EAAD00 00306D (v01 DptfTa DptfTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: HPET 0x00000000C9EADD70 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EADDA8 000298 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000C9EAE040 003EE7 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EB1F28 000CA1 (v01 SgRef SgPch 00001000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000C9EB2BD0 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: SSDT 0x00000000C9EB2C08 001480 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AC7E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1af1f5000-0x1af1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a8800000-ffff8801ae7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9d7dfff]
[ 0.000000] node 0: [mem 0x00000000b9d85000-0x00000000ba5dafff]
[ 0.000000] node 0: [mem 0x00000000ba85b000-0x00000000c98b4fff]
[ 0.000000] node 0: [mem 0x00000000c9aca000-0x00000000c9e0efff]
[ 0.000000] node 0: [mem 0x00000000cafff000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001af1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001af1fffff]
[ 0.000000] On node 0 totalpages: 1542928
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12838 pages used for memmap
[ 0.000000] DMA32 zone: 821620 pages, LIFO batch:31
[ 0.000000] Normal zone: 11208 pages used for memmap
[ 0.000000] Normal zone: 717312 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9d7e000-0xb9d84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba5db000-0xba85afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba86a000-0xba86afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba877000-0xba877fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98b5000-0xc9ac9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e0f000-0xcab1cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab1d000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff8801aee00000 s87128 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s87128 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1518797
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=/intel-ucode.img initrd=/initramfs-linux-mainline.img root=/dev/sda2 rw rootfstype=ext4 acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5953756K/6171712K available (5573K kernel code, 893K rwdata, 1788K rodata, 1168K init, 1156K bss, 217956K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] tsc: Detected 2394.353 MHz processor
[ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.23 BogoMIPS (lpj=7981176)
[ 0.000044] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20150204
[ 0.034560] ACPI: All ACPI Tables successfully acquired
[ 0.036629] Security Framework initialized
[ 0.036636] Yama: becoming mindful.
[ 0.037324] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039478] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040415] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.040670] Initializing cgroup subsys blkio
[ 0.040674] Initializing cgroup subsys memory
[ 0.040681] Initializing cgroup subsys devices
[ 0.040684] Initializing cgroup subsys freezer
[ 0.040686] Initializing cgroup subsys net_cls
[ 0.040715] CPU: Physical Processor ID: 0
[ 0.040716] CPU: Processor Core ID: 0
[ 0.040721] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040722] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.041941] mce: CPU supports 7 MCE banks
[ 0.041957] CPU0: Thermal monitoring enabled (TM1)
[ 0.041970] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.041972] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.042092] Freeing SMP alternatives memory: 20K (ffffffff81a05000 - ffffffff81a0a000)
[ 0.043116] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.044495] ftrace: allocating 21346 entries in 84 pages
[ 0.056747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.089782] TSC deadline timer enabled
[ 0.089786] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01)
[ 0.089816] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.089843] ... version: 3
[ 0.089844] ... bit width: 48
[ 0.089845] ... generic registers: 4
[ 0.089847] ... value mask: 0000ffffffffffff
[ 0.089848] ... max period: 0000ffffffffffff
[ 0.089849] ... fixed-purpose events: 3
[ 0.089850] ... event mask: 000000070000000f
[ 0.109937] x86: Booting SMP configuration:
[ 0.109940] .... node #0, CPUs: #1
[ 0.122572] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.126042] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.129984] #2 #3
[ 0.165939] x86: Booted up 1 node, 4 CPUs
[ 0.165943] smpboot: Total of 4 processors activated (19162.94 BogoMIPS)
[ 0.170937] devtmpfs: initialized
[ 0.173870] PM: Registering ACPI NVS region [mem 0xb9d7e000-0xb9d84fff] (28672 bytes)
[ 0.173872] PM: Registering ACPI NVS region [mem 0xc9e0f000-0xcab1cfff] (13688832 bytes)
[ 0.174282] pinctrl core: initialized pinctrl subsystem
[ 0.174328] RTC time: 14:49:34, date: 03/14/15
[ 0.174468] NET: Registered protocol family 16
[ 0.187440] cpuidle: using governor ladder
[ 0.200788] cpuidle: using governor menu
[ 0.200839] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.200841] ACPI: bus type PCI registered
[ 0.200843] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.200934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.200937] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.201048] PCI: Using configuration type 1 for base access
[ 0.214532] ACPI: Added _OSI(Module Device)
[ 0.214535] ACPI: Added _OSI(Processor Device)
[ 0.214536] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.214538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218484] ACPI : EC: EC description table is found, configuring boot EC
[ 0.222593] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.234176] ACPI: Dynamic OEM Table Load:
[ 0.234185] ACPI: SSDT 0xFFFF8801A7134800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.235459] ACPI: Dynamic OEM Table Load:
[ 0.235467] ACPI: SSDT 0xFFFF8801A709A000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.236797] ACPI: Dynamic OEM Table Load:
[ 0.236803] ACPI: SSDT 0xFFFF8801A7114A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.238841] ACPI: Interpreter enabled
[ 0.238853] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.238863] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.238892] ACPI: (supports S0 S3 S4 S5)
[ 0.238894] ACPI: Using IOAPIC for interrupt routing
[ 0.238931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.240682] ACPI: Power Resource [PC05] (on)
[ 0.255005] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255012] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.255033] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.255037] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.256966] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.256974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.257651] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.258130] PCI host bridge to bus 0000:00
[ 0.258134] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.258137] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.258139] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.258141] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.258143] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.258145] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.258147] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.258149] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.258151] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.258153] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.258155] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.258157] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.258159] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
[ 0.258169] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.258303] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.258318] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.258327] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.258334] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.258456] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.258467] pci 0000:00:03.0: reg 0x10: [mem 0xf7a1c000-0xf7a1ffff 64bit]
[ 0.258597] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 0.258612] pci 0000:00:04.0: reg 0x10: [mem 0xf7a10000-0xf7a17fff 64bit]
[ 0.258761] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.258781] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.258849] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.258907] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.258954] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.258975] pci 0000:00:16.0: reg 0x10: [mem 0xf7a25000-0xf7a2501f 64bit]
[ 0.259046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.259156] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.259173] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
[ 0.259250] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.259309] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.259353] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.259428] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.259489] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.259533] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.259611] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.259672] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.259717] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.259794] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.259855] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.259900] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 0.259977] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.260053] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.260107] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.260130] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a23000-0xf7a233ff]
[ 0.260231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.260306] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.260356] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.260569] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.260586] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.260595] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.260603] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.260611] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.260619] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.260627] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a22000-0xf7a227ff]
[ 0.260670] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.260765] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.260781] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a21000-0xf7a210ff 64bit]
[ 0.260803] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.260996] acpiphp: Slot [1] registered
[ 0.261002] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.261103] pci 0000:02:00.0: [1969:10a1] type 00 class 0x020000
[ 0.261131] pci 0000:02:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[ 0.261144] pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.261271] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.261309] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.267583] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.267587] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.267591] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.269364] pci 0000:03:00.0: [1814:3290] type 00 class 0x028000
[ 0.269385] pci 0000:03:00.0: reg 0x10: [mem 0xf7810000-0xf781ffff]
[ 0.269534] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.269571] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.271295] pci 0000:03:00.1: [1814:3298] type 00 class 0x0d1100
[ 0.271315] pci 0000:03:00.1: reg 0x10: [mem 0xf7800000-0xf780ffff]
[ 0.271464] pci 0000:03:00.1: supports D1
[ 0.271466] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.279635] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.279641] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.279744] pci 0000:04:00.0: [10de:1140] type 00 class 0x030200
[ 0.279769] pci 0000:04:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.279792] pci 0000:04:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279816] pci 0000:04:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.279831] pci 0000:04:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.279847] pci 0000:04:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.279982] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.284661] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.284665] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.284668] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.284674] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.284707] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.285766] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.285822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285928] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.285979] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286080] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286131] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.286172] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.286178] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.286526] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.286627] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.286757] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.286760] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.286764] vgaarb: loaded
[ 0.286765] vgaarb: bridge control possible 0000:00:02.0
[ 0.286917] PCI: Using ACPI for IRQ routing
[ 0.288384] PCI: pci_cache_line_size set to 64 bytes
[ 0.288438] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.288440] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.288442] e820: reserve RAM buffer [mem 0xb9d7e000-0xbbffffff]
[ 0.288444] e820: reserve RAM buffer [mem 0xba5db000-0xbbffffff]
[ 0.288445] e820: reserve RAM buffer [mem 0xba86a018-0xbbffffff]
[ 0.288447] e820: reserve RAM buffer [mem 0xc98b5000-0xcbffffff]
[ 0.288449] e820: reserve RAM buffer [mem 0xc9e0f000-0xcbffffff]
[ 0.288451] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.288453] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
[ 0.288579] NetLabel: Initializing
[ 0.288580] NetLabel: domain hash size = 128
[ 0.288581] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.288596] NetLabel: unlabeled traffic allowed by default
[ 0.288627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.288633] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.290662] Switched to clocksource hpet
[ 0.296419] pnp: PnP ACPI init
[ 0.296545] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.296549] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.296845] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.296848] system 00:01: [io 0xffff] has been reserved
[ 0.296850] system 00:01: [io 0xffff] has been reserved
[ 0.296852] system 00:01: [io 0xffff] has been reserved
[ 0.296854] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.296856] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.296859] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.296861] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.296863] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.296865] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.296868] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296905] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.296966] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.296969] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.297030] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.297033] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297073] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.297075] system 00:05: [io 0x0380-0x038f] has been reserved
[ 0.297077] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297149] pnp 00:06: Plug and Play ACPI device, IDs FLT0102 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.297194] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.297753] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.297756] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.297759] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.297762] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.297765] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.297768] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.297771] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.297774] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.297777] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.297780] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.297783] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.297785] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.297789] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297888] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298113] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.298119] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff8801a84aeaf0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.298320] pnp: PnP ACPI: found 10 devices
[ 0.304961] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.304974] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.304978] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.304983] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.304991] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.304996] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.305004] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.305007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.305012] pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.305016] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.305026] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.305028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.305030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.305032] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.305034] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.305036] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.305038] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.305040] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.305042] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.305044] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.305046] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff window]
[ 0.305049] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.305051] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.305053] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.305055] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.305057] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.305059] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.305092] NET: Registered protocol family 2
[ 0.305327] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305508] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305650] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.305671] TCP: reno registered
[ 0.305686] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305719] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305779] NET: Registered protocol family 1
[ 0.305797] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.306052] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.306077] PCI: CLS 64 bytes, default 64
[ 0.306126] Unpacking initramfs...
[ 0.388937] Freeing initrd memory: 4088K (ffff88007fc02000 - ffff880080000000)
[ 0.388947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.388951] software IO TLB [mem 0xc32f8000-0xc72f8000] (64MB) mapped at [ffff8800c32f8000-ffff8800c72f7fff]
[ 0.389171] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.389230] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389238] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389248] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389258] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 0.389313] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.389343] Scanning for low memory corruption every 60 seconds
[ 0.389619] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.389637] Initialise system trusted keyring
[ 0.390008] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391638] zpool: loaded
[ 0.391641] zbud: loaded
[ 0.391847] VFS: Disk quotas dquot_6.5.2
[ 0.391886] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392076] Key type big_key registered
[ 0.392275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.392313] io scheduler noop registered
[ 0.392316] io scheduler deadline registered
[ 0.392350] io scheduler cfq registered (default)
[ 0.393087] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.393092] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.393109] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.393111] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.393115] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.393130] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.393132] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.393134] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.393138] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.393154] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.393156] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.393160] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.393168] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393205] efifb: probing for efifb
[ 0.393226] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 4128k, total 4128k
[ 0.393228] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.393229] efifb: scrolling: redraw
[ 0.393231] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.396869] Console: switching to colour frame buffer device 170x48
[ 0.400357] fb0: EFI VGA frame buffer device
[ 0.400367] intel_idle: MWAIT substates: 0x11142120
[ 0.400369] intel_idle: v0.4 model 0x45
[ 0.400370] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.400674] GHES: HEST is not enabled!
[ 0.400759] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.401281] Linux agpgart interface v0.103
[ 0.401345] rtc_cmos 00:02: RTC can wake from S4
[ 0.401480] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.401510] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.401526] Intel P-state driver initializing.
[ 0.401679] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.402207] TCP: cubic registered
[ 0.402436] NET: Registered protocol family 10
[ 0.402861] NET: Registered protocol family 17
[ 0.403549] Loading compiled-in X.509 certificates
[ 0.403578] registered taskstats version 1
[ 0.404855] Magic number: 7:305:839
[ 0.405045] rtc_cmos 00:02: setting system clock to 2015-03-14 14:49:34 UTC (1426344574)
[ 0.405254] PM: Hibernation image not present or could not be loaded.
[ 0.405865] Freeing unused kernel memory: 1168K (ffffffff818e1000 - ffffffff81a05000)
[ 0.405869] Write protecting the kernel read-only data: 8192k
[ 0.406503] Freeing unused kernel memory: 560K (ffff880001574000 - ffff880001600000)
[ 0.406722] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 0.415600] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.428621] sdhci: Secure Digital Host Controller Interface driver
[ 0.428624] sdhci: Copyright(c) Pierre Ossman
[ 0.432810] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.434654] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.434686] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.438789] ACPI: bus type USB registered
[ 0.438822] usbcore: registered new interface driver usbfs
[ 0.438836] usbcore: registered new interface driver hub
[ 0.438866] usbcore: registered new device driver usb
[ 0.439456] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.439732] ehci-pci: EHCI PCI platform driver
[ 0.439788] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.439796] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.439810] ehci-pci 0000:00:1d.0: debug port 2
[ 0.440689] SCSI subsystem initialized
[ 0.441807] libata version 3.00 loaded.
[ 0.443716] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.443738] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
[ 0.450881] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.457612] hub 1-0:1.0: USB hub found
[ 0.457623] hub 1-0:1.0: 2 ports detected
[ 0.457875] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457882] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457958] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00003810
[ 0.457964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.458152] hub 2-0:1.0: USB hub found
[ 0.458161] hub 2-0:1.0: 9 ports detected
[ 0.460386] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460507] hub 3-0:1.0: USB hub found
[ 0.460513] hub 3-0:1.0: 4 ports detected
[ 0.461400] ahci 0000:00:1f.2: version 3.0
[ 0.461544] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.474228] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 0.474234] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 0.474875] scsi host0: ahci
[ 0.475020] scsi host1: ahci
[ 0.475159] scsi host2: ahci
[ 0.475279] scsi host3: ahci
[ 0.475335] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 45
[ 0.475337] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 45
[ 0.475339] ata3: DUMMY
[ 0.475340] ata4: DUMMY
[ 0.483062] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.764471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.794476] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.797272] ata1.00: ATA-9: Corsair Force LX SSD, N0307A, max UDMA/133
[ 0.797277] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 0.797611] ata1.00: configured for UDMA/133
[ 0.797790] scsi 0:0:0:0: Direct-Access ATA Corsair Force LX 7A PQ: 0 ANSI: 5
[ 0.817843] usb 2-5: new high-speed USB device number 2 using xhci_hcd
[ 0.888974] hub 1-1:1.0: USB hub found
[ 0.889039] hub 1-1:1.0: 8 ports detected
[ 1.118072] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.121576] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, AS00, max UDMA/100
[ 1.126383] ata2.00: configured for UDMA/100
[ 1.134312] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB AS00 PQ: 0 ANSI: 5
[ 1.145602] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.145650] sd 0:0:0:0: [sda] Write Protect is off
[ 1.145655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.145664] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.149453] sda: sda1 sda2 sda3
[ 1.149802] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.159142] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.159146] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.159335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.270792] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.332987] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.333146] systemd[1]: Detected architecture 'x86-64'.
[ 1.333579] systemd[1]: Set hostname to <hal>.
[ 1.390731] systemd[1]: Starting Login Prompts.
[ 1.390866] systemd[1]: Reached target Login Prompts.
[ 1.390892] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.391053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.391068] systemd[1]: Expecting device dev-sda1.device...
[ 1.391131] systemd[1]: Starting Swap.
[ 1.391189] systemd[1]: Reached target Swap.
[ 1.391204] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.391237] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.391251] systemd[1]: Starting Root Slice.
[ 1.391516] systemd[1]: Created slice Root Slice.
[ 1.391530] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.391586] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 1.391660] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.391676] systemd[1]: Starting Journal Socket.
[ 1.391774] systemd[1]: Listening on Journal Socket.
[ 1.391804] systemd[1]: Starting User and Session Slice.
[ 1.391891] systemd[1]: Created slice User and Session Slice.
[ 1.391899] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.391955] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.391963] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.392014] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.392021] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.392076] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.392083] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.392142] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.404539] systemd[1]: Listening on Journal Audit Socket.
[ 1.404567] systemd[1]: Starting System Slice.
[ 1.404753] systemd[1]: Created slice System Slice.
[ 1.405170] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.405256] systemd[1]: Mounting Debug File System...
[ 1.405704] systemd[1]: Starting Setup Virtual Console...
[ 1.406206] systemd[1]: Starting Journal Service...
[ 1.406973] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.407431] systemd[1]: Starting system-getty.slice.
[ 1.407583] systemd[1]: Created slice system-getty.slice.
[ 1.407652] systemd[1]: Mounting Huge Pages File System...
[ 1.408243] systemd[1]: Started File System Check on Root Device.
[ 1.408275] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.408675] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.408786] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.408802] systemd[1]: Starting Encrypted Volumes.
[ 1.408843] systemd[1]: Reached target Encrypted Volumes.
[ 1.408860] systemd[1]: Starting udev Control Socket.
[ 1.408920] systemd[1]: Listening on udev Control Socket.
[ 1.409625] systemd[1]: Mounting Temporary Directory...
[ 1.410189] systemd[1]: Starting udev Kernel Socket.
[ 1.410267] systemd[1]: Listening on udev Kernel Socket.
[ 1.410296] systemd[1]: Starting udev Coldplug all Devices...
[ 1.411636] systemd[1]: Started Load Kernel Modules.
[ 1.411663] systemd[1]: Mounted FUSE Control File System.
[ 1.411711] systemd[1]: Mounting Configuration File System...
[ 1.412105] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.412517] systemd[1]: Starting Remote File Systems.
[ 1.412594] systemd[1]: Reached target Remote File Systems.
[ 1.412633] systemd[1]: Starting Apply Kernel Variables...
[ 1.413108] systemd[1]: Expecting device dev-sda3.device...
[ 1.413180] systemd[1]: Starting Slices.
[ 1.413242] systemd[1]: Reached target Slices.
[ 1.413268] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.413329] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.413348] systemd[1]: Starting Paths.
[ 1.413415] systemd[1]: Reached target Paths.
[ 1.413980] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.415449] systemd[1]: Started Setup Virtual Console.
[ 1.417502] systemd[1]: Mounted Configuration File System.
[ 1.417780] EXT4-fs (sda2): re-mounted. Opts: data=ordered,discard
[ 1.419393] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.420243] systemd[1]: Mounted Debug File System.
[ 1.420980] systemd[1]: Mounted Huge Pages File System.
[ 1.421670] systemd[1]: Mounted Temporary Directory.
[ 1.422842] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.431714] systemd[1]: Started Apply Kernel Variables.
[ 1.432536] systemd[1]: Started udev Coldplug all Devices.
[ 1.437198] systemd[1]: Starting Load/Save Random Seed...
[ 1.438791] systemd[1]: Started Rebuild Hardware Database.
[ 1.438826] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.438844] systemd[1]: Started First Boot Wizard.
[ 1.438860] systemd[1]: Started Create System Users.
[ 1.438917] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.443195] systemd[1]: Started Load/Save Random Seed.
[ 1.459454] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.460356] systemd[1]: Starting udev Kernel Device Manager...
[ 1.461282] systemd[1]: Starting Local File Systems (Pre).
[ 1.461977] systemd[1]: Reached target Local File Systems (Pre).
[ 1.531924] systemd[1]: Started udev Kernel Device Manager.
[ 1.553706] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.556325] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.561234] ACPI: Lid Switch [LID]
[ 1.561319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.561324] ACPI: Sleep Button [SLPB]
[ 1.561393] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.561396] ACPI: Power Button [PWRF]
[ 1.580408] ACPI: AC Adapter [AC0] (on-line)
[ 1.606236] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.610817] [drm] Initialized drm 1.1.0 20060810
[ 1.647229] ACPI: Battery Slot [BAT0] (battery present)
[ 1.647475] wmi: Mapper loaded
[ 1.677123] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 1.677422] sound hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 1.677426] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.677429] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 1.677431] sound hdaudioC1D0: mono: mono_out=0x0
[ 1.677433] sound hdaudioC1D0: inputs:
[ 1.677436] sound hdaudioC1D0: Internal Mic=0x1a
[ 1.677439] sound hdaudioC1D0: Mic=0x19
[ 1.677929] thermal LNXTHERM:00: registered as thermal_zone2
[ 1.677933] ACPI: Thermal Zone [THRM] (42 C)
[ 1.678052] sound hdaudioC1D0: Enable sync_write for stable communication
[ 1.680963] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input5
[ 1.681093] [drm] Memory usable by graphics device = 2048M
[ 1.681097] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ 1.681099] fb: switching to inteldrmfb from EFI VGA
[ 1.681124] Console: switching to colour dummy device 80x25
[ 1.681211] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 1.681232] [drm] Replacing VGA console driver
[ 1.681254] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 1.686528] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 1.693423] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [78:24:af:6c:a3:75]
[ 1.701875] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.701878] [drm] Driver supports precise vblank timestamp query.
[ 1.701979] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.709764] systemd[1]: Found device Corsair_Force_LX_SSD 3.
[ 1.710440] systemd[1]: Found device Corsair_Force_LX_SSD ESP.
[ 1.710484] systemd[1]: Mounting /boot...
[ 1.711777] systemd[1]: Starting File System Check on /dev/sda3...
[ 1.717424] iTCO_vendor_support: vendor-support=0
[ 1.717576] AVX2 version of gcm_enc/dec engaged.
[ 1.717578] AES CTR mode by8 optimization enabled
[ 1.717646] cfg80211: Calling CRDA to update world regulatory domain
[ 1.717946] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.717986] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.718109] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.718376] media: Linux media interface: v0.10
[ 1.727078] systemd[1]: Starting Sound Card.
[ 1.727130] systemd[1]: Reached target Sound Card.
[ 1.729262] asus_wmi: ASUS WMI generic driver loaded
[ 1.729427] Linux video capture interface: v2.00
[ 1.730834] asus_wmi: Initialization: 0x1
[ 1.730877] asus_wmi: BIOS WMI version: 7.9
[ 1.730930] asus_wmi: SFUN value: 0x4a0877
[ 1.731917] alx 0000:02:00.0 enp2s0: renamed from eth0
[ 1.732263] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[ 1.748309] fbcon: inteldrmfb (fb0) is primary device
[ 1.751204] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 1.761392] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1.765545] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1.772307] asus_wmi: Backlight controlled by ACPI video driver
[ 1.794652] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
[ 1.797927] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0013 detected
[ 1.798396] intel_rapl: Found RAPL domain package
[ 1.798398] intel_rapl: Found RAPL domain core
[

Still no ideas ?

MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

Touchpad now working (not detected)

Good day,
Since a week (maybe kernel 3.3.2 update, not sure) ago my touchpad stopped working (at all). I have attempted googling many times but could not fix it (neither do I found a bug in arch or anywhere for that). Today (kernel 3.3.3) it got working twice after restarts (out of nowhere), but no more.
What I've found is that it seem to not be detected (or it's detected as something completely different that doesn't even get close to a touchpad). It doesn't show up in Xorg.0.log, nor dmesg, nor in /proc/bus/input/devices.
Please, suggest where to dig - will provide more information (logs) if not enough.
Below are attached the logs after a fresh restart (touchpad not working):
Xorg.0.log
[ 15.861]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 15.861] X Protocol Version 11, Revision 0
[ 15.861] Build Operating System: Linux 3.3.1-1-ARCH x86_64
[ 15.861] Current Operating System: Linux arch-vostro 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012 x86_64
[ 15.861] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 15.861] Build Date: 14 April 2012 07:09:45AM
[ 15.861]
[ 15.861] Current version of pixman: 0.24.4
[ 15.861] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.861] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.862] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 25 21:51:33 2012
[ 16.007] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.043] (==) No Layout section. Using the first Screen section.
[ 16.043] (==) No screen section available. Using defaults.
[ 16.043] (**) |-->Screen "Default Screen Section" (0)
[ 16.043] (**) | |-->Monitor "<default monitor>"
[ 16.043] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.043] (==) Automatically adding devices
[ 16.043] (==) Automatically enabling devices
[ 16.159] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 16.159] Entry deleted from font path.
[ 16.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 16.166] Entry deleted from font path.
[ 16.166] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.166] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 16.166] Entry deleted from font path.
[ 16.166] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.166] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 16.166] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.166] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.166] (II) Loader magic: 0x7c7ae0
[ 16.166] (II) Module ABI versions:
[ 16.166] X.Org ANSI C Emulation: 0.4
[ 16.166] X.Org Video Driver: 12.0
[ 16.166] X.Org XInput driver : 16.0
[ 16.166] X.Org Server Extension : 6.0
[ 16.168] (--) PCI:*(0:1:0:0) 10de:0427:1028:0273 rev 161, Mem @ 0xca000000/16777216, 0xd0000000/268435456, 0xc8000000/33554432, I/O @ 0x00002000/128
[ 16.168] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 16.168] (II) LoadModule: "extmod"
[ 16.232] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 16.248] (II) Module extmod: vendor="X.Org Foundation"
[ 16.248] compiled for 1.12.1, module version = 1.0.0
[ 16.248] Module class: X.Org Server Extension
[ 16.248] ABI class: X.Org Server Extension, version 6.0
[ 16.248] (II) Loading extension MIT-SCREEN-SAVER
[ 16.248] (II) Loading extension XFree86-VidModeExtension
[ 16.248] (II) Loading extension XFree86-DGA
[ 16.248] (II) Loading extension DPMS
[ 16.248] (II) Loading extension XVideo
[ 16.248] (II) Loading extension XVideo-MotionCompensation
[ 16.248] (II) Loading extension X-Resource
[ 16.248] (II) LoadModule: "dbe"
[ 16.249] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 16.259] (II) Module dbe: vendor="X.Org Foundation"
[ 16.259] compiled for 1.12.1, module version = 1.0.0
[ 16.259] Module class: X.Org Server Extension
[ 16.259] ABI class: X.Org Server Extension, version 6.0
[ 16.259] (II) Loading extension DOUBLE-BUFFER
[ 16.259] (II) LoadModule: "glx"
[ 16.259] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.135] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.143] compiled for 4.0.2, module version = 1.0.0
[ 17.143] Module class: X.Org Server Extension
[ 17.143] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012
[ 17.143] (II) Loading extension GLX
[ 17.143] (II) LoadModule: "record"
[ 17.143] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 17.158] (II) Module record: vendor="X.Org Foundation"
[ 17.158] compiled for 1.12.1, module version = 1.13.0
[ 17.158] Module class: X.Org Server Extension
[ 17.158] ABI class: X.Org Server Extension, version 6.0
[ 17.158] (II) Loading extension RECORD
[ 17.158] (II) LoadModule: "dri"
[ 17.158] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 17.199] (II) Module dri: vendor="X.Org Foundation"
[ 17.199] compiled for 1.12.1, module version = 1.0.0
[ 17.199] ABI class: X.Org Server Extension, version 6.0
[ 17.199] (II) Loading extension XFree86-DRI
[ 17.199] (II) LoadModule: "dri2"
[ 17.199] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.214] (II) Module dri2: vendor="X.Org Foundation"
[ 17.214] compiled for 1.12.1, module version = 1.2.0
[ 17.214] ABI class: X.Org Server Extension, version 6.0
[ 17.214] (II) Loading extension DRI2
[ 17.214] (==) Matched nouveau as autoconfigured driver 0
[ 17.214] (==) Matched nvidia as autoconfigured driver 1
[ 17.214] (==) Matched nv as autoconfigured driver 2
[ 17.214] (==) Matched vesa as autoconfigured driver 3
[ 17.214] (==) Matched fbdev as autoconfigured driver 4
[ 17.214] (==) Assigned the driver to the xf86ConfigLayout
[ 17.214] (II) LoadModule: "nouveau"
[ 17.219] (WW) Warning, couldn't open module nouveau
[ 17.219] (II) UnloadModule: "nouveau"
[ 17.219] (II) Unloading nouveau
[ 17.219] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 17.219] (II) LoadModule: "nvidia"
[ 17.219] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 17.322] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 17.323] compiled for 4.0.2, module version = 1.0.0
[ 17.323] Module class: X.Org Video Driver
[ 17.349] (II) LoadModule: "nv"
[ 17.349] (WW) Warning, couldn't open module nv
[ 17.349] (II) UnloadModule: "nv"
[ 17.349] (II) Unloading nv
[ 17.349] (EE) Failed to load module "nv" (module does not exist, 0)
[ 17.349] (II) LoadModule: "vesa"
[ 17.349] (WW) Warning, couldn't open module vesa
[ 17.349] (II) UnloadModule: "vesa"
[ 17.349] (II) Unloading vesa
[ 17.349] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 17.349] (II) LoadModule: "fbdev"
[ 17.349] (WW) Warning, couldn't open module fbdev
[ 17.349] (II) UnloadModule: "fbdev"
[ 17.349] (II) Unloading fbdev
[ 17.349] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 17.350] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012
[ 17.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 17.362] (++) using VT number 7
[ 17.442] (II) Loading sub module "fb"
[ 17.442] (II) LoadModule: "fb"
[ 17.442] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.457] (II) Module fb: vendor="X.Org Foundation"
[ 17.457] compiled for 1.12.1, module version = 1.0.0
[ 17.457] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.457] (II) Loading sub module "wfb"
[ 17.457] (II) LoadModule: "wfb"
[ 17.457] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 17.471] (II) Module wfb: vendor="X.Org Foundation"
[ 17.471] compiled for 1.12.1, module version = 1.0.0
[ 17.471] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.471] (II) Loading sub module "ramdac"
[ 17.471] (II) LoadModule: "ramdac"
[ 17.471] (II) Module "ramdac" already built-in
[ 17.511] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.511] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 17.511] (==) NVIDIA(0): RGB weight 888
[ 17.511] (==) NVIDIA(0): Default visual is TrueColor
[ 17.511] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.511] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.252] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 19.252] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.262] (II) NVIDIA(0): NVIDIA GPU GeForce 8400M GS (G86M) at PCI:1:0:0 (GPU-0)
[ 19.263] (--) NVIDIA(0): Memory: 524288 kBytes
[ 19.263] (--) NVIDIA(0): VideoBIOS: 60.86.64.00.27
[ 19.263] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 19.263] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 19.270] (--) NVIDIA(0): Connected display device(s) on GeForce 8400M GS at PCI:1:0:0
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0)
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 19.270] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[ 19.270] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.270] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 19.270] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.316] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 19.316] (==) NVIDIA(0):
[ 19.316] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 19.316] (==) NVIDIA(0): will be used as the requested mode.
[ 19.316] (==) NVIDIA(0):
[ 19.316] (II) NVIDIA(0): Validated modes:
[ 19.316] (II) NVIDIA(0): "nvidia-auto-select"
[ 19.316] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 20.327] (--) NVIDIA(0): DPI set to (110, 108); computed from "UseEdidDpi" X config
[ 20.327] (--) NVIDIA(0): option
[ 20.327] (--) Depth 24 pixmap format is 32 bpp
[ 20.327] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 20.347] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 20.347] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 20.347] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 20.347] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 20.347] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 20.347] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 20.347] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 20.347] (II) NVIDIA(0): Config Options in the README.
[ 20.359] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 20.684] (II) Loading extension NV-GLX
[ 20.780] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 20.780] (==) NVIDIA(0): Backing store disabled
[ 20.780] (==) NVIDIA(0): Silken mouse enabled
[ 20.781] (==) NVIDIA(0): DPMS enabled
[ 20.781] (II) Loading extension NV-CONTROL
[ 20.782] (II) Loading extension XINERAMA
[ 20.782] (II) Loading sub module "dri2"
[ 20.782] (II) LoadModule: "dri2"
[ 20.782] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.782] (II) Module dri2: vendor="X.Org Foundation"
[ 20.782] compiled for 1.12.1, module version = 1.2.0
[ 20.782] ABI class: X.Org Server Extension, version 6.0
[ 20.782] (II) NVIDIA(0): [DRI2] Setup complete
[ 20.782] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 20.782] (==) RandR enabled
[ 20.782] (II) Initializing built-in extension Generic Event Extension
[ 20.782] (II) Initializing built-in extension SHAPE
[ 20.782] (II) Initializing built-in extension MIT-SHM
[ 20.782] (II) Initializing built-in extension XInputExtension
[ 20.782] (II) Initializing built-in extension XTEST
[ 20.782] (II) Initializing built-in extension BIG-REQUESTS
[ 20.782] (II) Initializing built-in extension SYNC
[ 20.782] (II) Initializing built-in extension XKEYBOARD
[ 20.782] (II) Initializing built-in extension XC-MISC
[ 20.782] (II) Initializing built-in extension SECURITY
[ 20.782] (II) Initializing built-in extension XINERAMA
[ 20.782] (II) Initializing built-in extension XFIXES
[ 20.782] (II) Initializing built-in extension RENDER
[ 20.782] (II) Initializing built-in extension RANDR
[ 20.782] (II) Initializing built-in extension COMPOSITE
[ 20.782] (II) Initializing built-in extension DAMAGE
[ 20.783] (II) Initializing extension GLX
[ 21.299] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.300] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.300] (II) LoadModule: "evdev"
[ 21.300] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.309] (II) Module evdev: vendor="X.Org Foundation"
[ 21.309] compiled for 1.12.0, module version = 2.7.0
[ 21.309] Module class: X.Org XInput Driver
[ 21.309] ABI class: X.Org XInput driver, version 16.0
[ 21.309] (II) Using input driver 'evdev' for 'Power Button'
[ 21.309] (**) Power Button: always reports core events
[ 21.309] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 21.309] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.309] (--) evdev: Power Button: Found keys
[ 21.309] (II) evdev: Power Button: Configuring as keyboard
[ 21.309] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.309] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.309] (**) Option "xkb_rules" "evdev"
[ 21.309] (**) Option "xkb_model" "evdev"
[ 21.309] (**) Option "xkb_layout" "us"
[ 21.329] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 21.329] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 21.329] (II) Using input driver 'evdev' for 'Video Bus'
[ 21.329] (**) Video Bus: always reports core events
[ 21.329] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 21.329] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 21.329] (--) evdev: Video Bus: Found keys
[ 21.329] (II) evdev: Video Bus: Configuring as keyboard
[ 21.329] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5/event5"
[ 21.329] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 21.329] (**) Option "xkb_rules" "evdev"
[ 21.329] (**) Option "xkb_model" "evdev"
[ 21.329] (**) Option "xkb_layout" "us"
[ 21.330] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 21.330] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.330] (II) Using input driver 'evdev' for 'Power Button'
[ 21.330] (**) Power Button: always reports core events
[ 21.330] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 21.330] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.330] (--) evdev: Power Button: Found keys
[ 21.330] (II) evdev: Power Button: Configuring as keyboard
[ 21.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 21.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 21.330] (**) Option "xkb_rules" "evdev"
[ 21.330] (**) Option "xkb_model" "evdev"
[ 21.330] (**) Option "xkb_layout" "us"
[ 21.330] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 21.330] (II) No input driver specified, ignoring this device.
[ 21.330] (II) This device may have been added with another device file.
[ 21.330] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 21.330] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 21.330] (II) Using input driver 'evdev' for 'Sleep Button'
[ 21.330] (**) Sleep Button: always reports core events
[ 21.330] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 21.330] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 21.330] (--) evdev: Sleep Button: Found keys
[ 21.330] (II) evdev: Sleep Button: Configuring as keyboard
[ 21.331] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 21.331] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 21.331] (**) Option "xkb_rules" "evdev"
[ 21.331] (**) Option "xkb_model" "evdev"
[ 21.331] (**) Option "xkb_layout" "us"
[ 21.331] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event11)
[ 21.331] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[ 21.331] (II) Using input driver 'evdev' for 'Integrated Webcam'
[ 21.331] (**) Integrated Webcam: always reports core events
[ 21.331] (**) evdev: Integrated Webcam: Device: "/dev/input/event11"
[ 21.331] (--) evdev: Integrated Webcam: Vendor 0xc45 Product 0x63e0
[ 21.331] (--) evdev: Integrated Webcam: Found keys
[ 21.331] (II) evdev: Integrated Webcam: Configuring as keyboard
[ 21.331] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input11/event11"
[ 21.331] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 10)
[ 21.331] (**) Option "xkb_rules" "evdev"
[ 21.331] (**) Option "xkb_model" "evdev"
[ 21.331] (**) Option "xkb_layout" "us"
[ 21.332] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 21.332] (II) No input driver specified, ignoring this device.
[ 21.332] (II) This device may have been added with another device file.
[ 21.332] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 21.332] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 21.332] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 21.332] (**) AT Translated Set 2 keyboard: always reports core events
[ 21.332] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 21.332] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 21.332] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 21.332] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 21.332] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 21.332] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 21.332] (**) Option "xkb_rules" "evdev"
[ 21.332] (**) Option "xkb_model" "evdev"
[ 21.332] (**) Option "xkb_layout" "us"
[ 21.333] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 21.333] (II) No input driver specified, ignoring this device.
[ 21.333] (II) This device may have been added with another device file.
[ 21.333] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 21.333] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 21.333] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 21.333] (**) Dell WMI hotkeys: always reports core events
[ 21.333] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
[ 21.333] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 21.333] (--) evdev: Dell WMI hotkeys: Found keys
[ 21.333] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 21.333] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 21.333] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
[ 21.333] (**) Option "xkb_rules" "evdev"
[ 21.333] (**) Option "xkb_model" "evdev"
[ 21.333] (**) Option "xkb_layout" "us"
[ 39.462] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/event12)
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: Applying InputClass "evdev pointer catchall"
[ 39.462] (II) Using input driver 'evdev' for 'Microsoft Bluetooth Notebook Mouse 5000'
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: always reports core events
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: Device: "/dev/input/event12"
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Vendor 0x45e Product 0x700
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found 8 mouse buttons
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found scroll wheel(s)
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found relative axes
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found x and y relative axes
[ 39.462] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found absolute axes
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Forcing absolute x/y axes to exist.
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Configuring as mouse
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Adding scrollwheel support
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: YAxisMapping: buttons 4 and 5
[ 39.462] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 39.462] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/bluetooth/hci0/hci0:46/input12/event12"
[ 39.462] (II) XINPUT: Adding extended input device "Microsoft Bluetooth Notebook Mouse 5000" (type: MOUSE, id 13)
[ 39.462] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: initialized for relative axes.
[ 39.462] (WW) evdev: Microsoft Bluetooth Notebook Mouse 5000: ignoring absolute axes.
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) keeping acceleration scheme 1
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration profile 0
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration factor: 2.000
[ 39.462] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration threshold: 4
[ 39.462] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/mouse0)
[ 39.462] (II) No input driver specified, ignoring this device.
[ 39.462] (II) This device may have been added with another device file.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120414 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Apr 23 09:41:07 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Vostro1510/0G914C, BIOS A10 07/10/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f76f0] f76f0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ bfeca000-bfed0000
[ 0.000000] RAMDISK: 37a4e000 - 37d1f000
[ 0.000000] ACPI: RSDP 00000000000f7670 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000bfed689a 0008C (v01 DELL M08 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfedecd6 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfed7db1 06EB1 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
[ 0.000000] ACPI: APIC 00000000bfededca 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 00000000bfedee32 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfedee6a 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 00000000bfedeea6 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 00000000bfedeed8 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: OSFR 00000000bfedeefe 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[ 0.000000] ACPI: APIC 00000000bfedef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfed7b04 002AD (v01 SataRe SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6eb2 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6e0c 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed6926 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1048159
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765712 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82176 r8192 d24320 u1048576
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027674
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e3804e7a-2c2c-4e96-b9fe-50542609dc73 ro ipv6.disable=1 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046772k/5242880k available (4495k kernel code, 1050244k absent, 145864k reserved, 4327k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2493.737 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.28 BogoMIPS (lpj=8312456)
[ 0.003341] pid_max: default: 32768 minimum: 301
[ 0.003366] Security Framework initialized
[ 0.003372] AppArmor: AppArmor disabled by boot time parameter
[ 0.003684] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007297] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008428] Mount-cache hash table entries: 256
[ 0.008584] Initializing cgroup subsys cpuacct
[ 0.008587] Initializing cgroup subsys memory
[ 0.008597] Initializing cgroup subsys devices
[ 0.008599] Initializing cgroup subsys freezer
[ 0.008601] Initializing cgroup subsys net_cls
[ 0.008603] Initializing cgroup subsys blkio
[ 0.008639] CPU: Physical Processor ID: 0
[ 0.008640] CPU: Processor Core ID: 0
[ 0.008642] mce: CPU supports 6 MCE banks
[ 0.008650] CPU0: Thermal monitoring handled by SMI
[ 0.008654] using mwait in idle threads.
[ 0.009761] ACPI: Core revision 20120111
[ 0.013342] ftrace: allocating 17484 entries in 69 pages
[ 0.020455] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056107] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
[ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056663] ... version: 2
[ 0.056663] ... bit width: 40
[ 0.056663] ... generic registers: 2
[ 0.056663] ... value mask: 000000ffffffffff
[ 0.056663] ... max period: 000000007fffffff
[ 0.056663] ... fixed-purpose events: 3
[ 0.056663] ... event mask: 0000000700000003
[ 0.073465] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.100006] Booting Node 0, Processors #1 Ok.
[ 0.100008] smpboot cpu 1: start_ip = 9a000
[ 0.006666] CPU1: Thermal monitoring handled by SMI
[ 0.113362] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.119996] Brought up 2 CPUs
[ 0.119998] Total of 2 processors activated (9978.57 BogoMIPS).
[ 0.122938] devtmpfs: initialized
[ 0.124435] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
[ 0.124435] NET: Registered protocol family 16
[ 0.124435] ACPI: bus type pci registered
[ 0.124435] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.124435] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.162520] PCI: Using configuration type 1 for base access
[ 0.162527] dmi type 0xB1 record - unknown flag
[ 0.163353] bio: create slab <bio-0> at 0
[ 0.163355] ACPI: Added _OSI(Module Device)
[ 0.163355] ACPI: Added _OSI(Processor Device)
[ 0.163357] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.163358] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164422] ACPI: EC: Look up EC in DSDT
[ 0.170006] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.170470] ACPI: SSDT 00000000bfed7780 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.170725] ACPI: Dynamic OEM Table Load:
[ 0.170728] ACPI: SSDT (null) 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.170826] ACPI: SSDT 00000000bfed7111 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.173475] ACPI: Dynamic OEM Table Load:
[ 0.173478] ACPI: SSDT (null) 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.173641] ACPI: SSDT 00000000bfed7a3c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.173891] ACPI: Dynamic OEM Table Load:
[ 0.173893] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
[ 0.173957] ACPI: SSDT 00000000bfed76fb 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.174201] ACPI: Dynamic OEM Table Load:
[ 0.174203] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
[ 0.174421] ACPI: Interpreter enabled
[ 0.174424] ACPI: (supports S0 S3 S4 S5)
[ 0.174439] ACPI: Using IOAPIC for interrupt routing
[ 0.237181] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.237303] ACPI: No dock devices found.
[ 0.237306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.237549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.237987] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.237990] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.237992] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.237994] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.237996] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.237998] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.238001] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.238003] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.238040] PCI host bridge to bus 0000:00
[ 0.238042] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.238044] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.238046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.238048] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.238050] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.238051] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.238053] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.238055] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.238064] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.238108] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[ 0.238148] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.238200] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.238256] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.238299] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.238354] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.238409] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.238434] pci 0000:00:1a.7: reg 10: [mem 0xf8304800-0xf8304bff]
[ 0.238543] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.238576] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.238597] pci 0000:00:1b.0: reg 10: [mem 0xf8300000-0xf8303fff 64bit]
[ 0.238698] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.238730] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.238838] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.238872] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.238980] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.239015] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.239123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.239156] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.239264] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.239296] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.239351] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.239393] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.239449] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.239490] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.239544] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.239600] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.239624] pci 0000:00:1d.7: reg 10: [mem 0xf8304c00-0xf8304fff]
[ 0.239733] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.239759] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.239854] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.239962] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.239968] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.239972] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.239976] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f)
[ 0.240040] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.240056] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.240069] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.240081] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.240092] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.240105] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.240159] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.240185] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.240196] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.240208] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.240220] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.240231] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.240243] pci 0000:00:1f.2: reg 24: [mem 0xf8304000-0xf83047ff]
[ 0.240307] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.240331] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.240347] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.240387] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.240474] pci 0000:01:00.0: [10de:0427] type 0 class 0x000300
[ 0.240494] pci 0000:01:00.0: reg 10: [mem 0xca000000-0xcaffffff]
[ 0.240515] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.240536] pci 0000:01:00.0: reg 1c: [mem 0xc8000000-0xc9ffffff 64bit]
[ 0.240551] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.240565] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.240669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.240672] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.240675] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcaffffff]
[ 0.240679] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.240738] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.240743] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.240747] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 0.240755] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.240815] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.240819] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.240824] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
[ 0.240831] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.241146] pci 0000:06:00.0: [14e4:4315] type 0 class 0x000280
[ 0.241215] pci 0000:06:00.0: reg 10: [mem 0xf4000000-0xf4003fff 64bit]
[ 0.241595] pci 0000:06:00.0: supports D1 D2
[ 0.241597] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.241777] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.241782] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.241786] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.241793] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.241928] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[ 0.241988] pci 0000:07:00.0: reg 10: [io 0x6000-0x60ff]
[ 0.242097] pci 0000:07:00.0: reg 18: [mem 0xf8410000-0xf8410fff 64bit pref]
[ 0.242168] pci 0000:07:00.0: reg 20: [mem 0xf8400000-0xf840ffff 64bit pref]
[ 0.242213] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.242482] pci 0000:07:00.0: supports D1 D2
[ 0.242484] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.242650] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.242654] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.242665] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.242717] pci 0000:08:05.0: [1217:00f7] type 0 class 0x000c00
[ 0.242738] pci 0000:08:05.0: reg 10: [mem 0xf8000000-0xf8000fff]
[ 0.242750] pci 0000:08:05.0: reg 14: [mem 0xf8002000-0xf80027ff]
[ 0.242837] pci 0000:08:05.0: supports D1 D2
[ 0.242839] pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.242866] pci 0000:08:05.2: [1217:7120] type 0 class 0x000805
[ 0.242891] pci 0000:08:05.2: reg 10: [mem 0xf8002800-0xf80028ff]
[ 0.243002] pci 0000:08:05.2: supports D1 D2
[ 0.243004] pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243031] pci 0000:08:05.3: [1217:7130] type 0 class 0x000180
[ 0.243055] pci 0000:08:05.3: reg 10: [mem 0xf8001000-0xf8001fff]
[ 0.243168] pci 0000:08:05.3: supports D1 D2
[ 0.243170] pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243235] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.243243] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.243250] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.243253] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.243255] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.243257] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.243259] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.243261] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.243263] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.243265] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.243301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.243423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.243461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.243493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.243526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.243558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.243610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.243650] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.243652] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.243654] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.247869] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.247912] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.247952] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.247991] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.248029] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.248068] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.248106] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.248145] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.248198] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.248198] vgaarb: loaded
[ 0.248198] vgaarb: bridge control possible 0000:01:00.0
[ 0.248198] PCI: Using ACPI for IRQ routing
[ 0.259277] PCI: pci_cache_line_size set to 64 bytes
[ 0.259762] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.259764] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.259862] NetLabel: Initializing
[ 0.259864] NetLabel: domain hash size = 128
[ 0.259865] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259877] NetLabel: unlabeled traffic allowed by default
[ 0.259881] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.259886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.259890] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.269997] Switching to clocksource hpet
[ 0.276375] pnp: PnP ACPI init
[ 0.276393] ACPI: bus type pnp registered
[ 0.276659] pnp 00:00: [bus 00-ff]
[ 0.276661] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.276676] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.276678] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.276680] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.276681] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.276683] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.276685] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.276687] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.276689] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.276691] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.276692] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.276694] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.276696] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.276698] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.276700] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.276702] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.276704] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.276705] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.276707] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.276713] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.276771] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.276835] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.276837] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.276839] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.276840] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.276842] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.276843] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.276845] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.276847] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.276900] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.276902] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.276904] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.276907] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.276909] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.276911] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.276913] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.276915] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.276918] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277064] pnp 00:02: [io 0x0000-0x001f]
[ 0.277066] pnp 00:02: [io 0x0081-0x0091]
[ 0.277068] pnp 00:02: [io 0x0093-0x009f]
[ 0.277069] pnp 00:02: [io 0x00c0-0x00df]
[ 0.277071] pnp 00:02: [dma 4]
[ 0.277108] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.277116] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.277151] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.277208] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.277259] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.277262] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.277271] pnp 00:05: [io 0x00f0]
[ 0.277281] pnp 00:05: [irq 13]
[ 0.277318] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.277328] pnp 00:06: [io 0x002e-0x002f]
[ 0.277329] pnp 00:06: [io 0x0061]
[ 0.277331] pnp 00:06: [io 0x0063]
[ 0.277332] pnp 00:06: [io 0x0065]
[ 0.277334] pnp 00:06: [io 0x0067]
[ 0.277335] pnp 00:06: [io 0x0080]
[ 0.277337] pnp 00:06: [io 0x0092]
[ 0.277338] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.277340] pnp 00:06: [io 0x0680-0x069f]
[ 0.277342] pnp 00:06: [io 0x0800-0x080f]
[ 0.277343] pnp 00:06: [io 0x1000-0x107f]
[ 0.277345] pnp 00:06: [io 0x1180-0x11bf]
[ 0.277346] pnp 00:06: [io 0xfe00]
[ 0.277348] pnp 00:06: [io 0xff00-0xff7f]
[ 0.277409] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.277412] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.277414] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.277416] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.277418] system 00:06: [io 0xfe00] has been reserved
[ 0.277420] system 00:06: [io 0xff00-0xff7f] has been reserved
[ 0.277423] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277431] pnp 00:07: [io 0x0070-0x0077]
[ 0.277436] pnp 00:07: [irq 8]
[ 0.277471] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303369] pnp 00:08: [io 0x0060]
[ 0.303371] pnp 00:08: [io 0x0064]
[ 0.303376] pnp 00:08: [irq 1]
[ 0.303417] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.303428] pnp 00:09: [irq 12]
[ 0.303469] pnp 00:09: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active)
[ 0.303485] pnp: PnP ACPI: found 10 devices
[ 0.303486] ACPI: ACPI bus type pnp unregistered
[ 0.310427] PCI: max bus depth: 1 pci_try_num: 2
[ 0.310483] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc4000000-0xc40fffff]
[ 0.310487] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4100000-0xc41000ff]
[ 0.310493] pci 0000:00:1c.4: BAR 14: assigned [mem 0xc4200000-0xc46fffff]
[ 0.310497] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.310499] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.310502] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.310505] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcaffffff]
[ 0.310508] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.310512] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.310515] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.310521] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
[ 0.310526] pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.310533] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.310536] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.310542] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
[ 0.310546] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.310554] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.310557] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.310563] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.310568] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.310576] pci 0000:07:00.0: BAR 6: assigned [mem 0xf8420000-0xf842ffff pref]
[ 0.310578] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.310581] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
[ 0.310587] pci 0000:00:1c.4: bridge window [mem 0xc4200000-0xc46fffff]
[ 0.310592] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.310600] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 0.310606] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.310656] pci 0000:00:1e.0: setting latency timer to 64
[ 0.310660] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.310662] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.310664] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310666] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.310668] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.310670] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.310672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.310674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.310676] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.310677] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcaffffff]
[ 0.310679] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.310682] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.310684] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
[ 0.310686] pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
[ 0.310688] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.310689] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf3ffffff]
[ 0.310691] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.310694] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
[ 0.310695] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.310697] pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.310700] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.310701] pci_bus 0000:07: resource 1 [mem 0xc4200000-0xc46fffff]
[ 0.310703] pci_bus 0000:07: resource 2 [mem 0xf8400000-0xf84fffff 64bit pref]
[ 0.310706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.310708] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.310710] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.310712] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310713] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.310715] pci_bus 0000:08: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.310717] pci_bus 0000:08: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.310719] pci_bus 0000:08: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.310721] pci_bus 0000:08: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.310755] NET: Registered protocol family 2
[ 0.310880] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.311982] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.316195] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.316791] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.316793] TCP reno registered
[ 0.316803] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.316846] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.316995] NET: Registered protocol family 1
[ 0.317267] pci 0000:01:00.0: Boot video device
[ 0.317481] PCI: CLS 64 bytes, default 64
[ 0.317536] Unpacking initramfs...
[ 0.374501] Freeing initrd memory: 2884k freed
[ 0.375594] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.375597] Placing 64MB software IO TLB between ffff8800bbeca000 - ffff8800bfeca000
[ 0.375598] software IO TLB at phys 0xbbeca000 - 0xbfeca000
[ 0.375610] Simple Boot Flag at 0x36 set to 0x1
[ 0.376082] audit: initializing netlink socket (disabled)
[ 0.376096] type=2000 audit(1335390677.373:1): initialized
[ 0.376634] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.378819] VFS: Disk quotas dquot_6.5.2
[ 0.378870] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.378959] msgmni has been set to 7909
[ 0.379145] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.379175] io scheduler noop registered
[ 0.379177] io scheduler deadline registered
[ 0.379231] io scheduler cfq registered (default)
[ 0.379359] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.379463] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.379588] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.379715] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.379842] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.379986] vesafb: mode is 1440x900x32, linelength=5760, pages=0
[ 0.379988] vesafb: scrolling: redraw
[ 0.379990] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.380871] vesafb: framebuffer at 0xc9000000, mapped to 0xffffc90011100000, using 5120k, total 5120k
[ 0.459332] Console: switching to colour frame buffer device 180x56
[ 0.537533] fb0: VESA VGA frame buffer device
[ 0.537543] intel_idle: MWAIT substates: 0x3122220
[ 0.537545] intel_idle: does not run on family 6 model 23
[ 0.537589] GHES: HEST is not enabled!
[ 0.537656] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.538109] Linux agpgart interface v0.103
[ 0.538184] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.549069] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.549174] mousedev: PS/2 mouse device common for all mice
[ 0.551979] rtc_cmos 00:07: RTC can wake from S4
[ 0.552091] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.552123] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.552132] cpuidle: using governor ladder
[ 0.552134] cpuidle: using governor menu
[ 0.552324] TCP cubic registered
[ 0.552326] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.552329] NET: Registered protocol family 17
[ 0.552341] Registering the dns_resolver key type
[ 0.552449] PM: Hibernation image not present or could not be loaded.
[ 0.552454] registered taskstats version 1
[ 0.560521] rtc_cmos 00:07: setting system clock to 2012-04-25 21:51:18 UTC (1335390678)
[ 0.560570] Initializing network drop monitor service
[ 0.565560] Freeing unused kernel memory: 732k freed
[ 0.565880] Write protecting the kernel read-only data: 8192k
[ 0.570360] Freeing unused kernel memory: 1632k freed
[ 0.572877] Freeing unused kernel memory: 656k freed
[ 0.579734] udevd[38]: starting version 182
[ 0.593304] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.607088] usbcore: registered new interface driver usbfs
[ 0.607172] usbcore: registered new interface driver hub
[ 0.608132] usbcore: registered new device driver usb
[ 0.608499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.608564] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.608568] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.608591] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.608626] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.612504] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.612523] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800
[ 0.614670] SCSI subsystem initialized
[ 0.616861] libata version 3.00 loaded.
[ 0.617667] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.620033] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.620307] hub 1-0:1.0: USB hub found
[ 0.620312] hub 1-0:1.0: 4 ports detected
[ 0.620479] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.620483] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.620496] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.620528] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.624409] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.624427] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00
[ 0.633354] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.633512] hub 2-0:1.0: USB hub found
[ 0.633516] hub 2-0:1.0: 6 ports detected
[ 0.633616] ata_piix 0000:00:1f.1: version 2.13
[ 0.633651] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.634377] scsi0 : ata_piix
[ 0.635315] scsi1 : ata_piix
[ 0.635744] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.635747] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.635809] uhci_hcd

hi all,
I was able to fax and get a connection now. My next question is, in the network preference I see the internal modem red dot showing it's configured but not connected. Shouldn't it be green or does it matter? Your input will greatly be appreciated.
Web dude

Touchpad button problem

Hi all,
A few weeks ago my MacBook (original Core Duo model) started detecting clicks on the touchpad button as double-clicks in the OS. This doesn't happen all the time, and seems much more likely to occur when I press on the left side of the button than the right, so I'm assuming it's a hardware issue.
Does anyone have a rough idea of how much it'd cost to get repaired at a UK Apple store? It's been out of warranty for a while unfortunately.
Thanks
J

I have two MB's one has a crisp trackpad button while the other had a mushy button. I fixed the mushy button quite easily. Take out the battery and look at the metal panel directly underneath the trackpad button. You'll see a circular indention in the metal. If you press lightly on the indention and at the same time press on the trackpad button you'll notice that the trackpad button's response is more crisp (at least mine was). I just pressed on the spot a few times to force the metal to bow every so slightly (not perceptible to the eye). Now my button clicks quite nicely across the entire button.

Synaptics Touchpad not working properly

Hi everyone,
I hope someone can help me with this problem. I have my laptop since more than 2 years and never had a problem with the touchpad. Since yesterday it's all messed up.
Touchpad is enabled and if set on right-handed and buttons and tapping enabled (the standard setting) it reacts as follows: I can continue to move the pointer, scroll and use the right button. I am not able to do tapping anymore and the left button doesn't react.
If I set it on left-handed, tapping starts working again and the right button (now having the function of the left button) works. Still, the left button doesn't react. If I disable the buttons the touchpad itself works properly (scroll, tapping etc).
I have googled and I have tried the following solutions: deinstalling / installing a new Synaptic / Windows driver (downgrading as well), than there was a suggestion to take out your battery and disconnect the power cable - did that as well, have tried enabling/disabling the touchpad - no change after that. I never have a mouse connected but I have now, tried disconnecting, made no difference. The day the error occured I had a Firefox upgrade - downgraded it again, no change. I used pressured air to clean the touchpad + buttons... no change...
I don't think this is a hardware problem because the tapping function, although always enabled, would only work with buttons disabled or with left-hand setting.
I really hope someone has a solution for this, it's driving me crazy!
My laptop is a HP Pavillion DV7 with Windows Vista 32-bit.
Many thanks in advance!
Cheers,
Steph

Is there no one who could help?

Touchpad not working archlinux_64 Bit KDE

Hi,
I just installed xf86-input-synaptics. I want to use my external USB mouse, which functions properly and the touchpad. The problem is that the touchpad only works during Login process (login manager) but not on the Desktop (KDE). Xorg.0.log shows that Synaptics was loaded successfully. The touchpad is recognized as Synaptics PS/2 which is also correct. synclient gives a normal output (touchpad settings and values), so what's the problem?
Greetings
Last edited by dmaschine (2013-07-02 14:33:58)

No it isn't:
xinput 14 gives:
SynPS/2 Synaptics TouchPad id=14 [slave pointer (2)]
This device is disabled
Reporting 9 classes:
Class originated from: 14. Type: XIButtonClass
Buttons supported: 12
Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" None None None None None
Button state:
Class originated from: 14. Type: XIValuatorClass
Detail for Valuator 0:
Label: Rel X
Range: 1472.000000 - 5664.000000
Resolution: 42000 units/m
Mode: relative
Class originated from: 14. Type: XIValuatorClass
Detail for Valuator 1:
Label: Rel Y
Range: 1408.000000 - 4682.000000
Resolution: 52000 units/m
Mode: relative
Class originated from: 14. Type: XIValuatorClass
Detail for Valuator 2:
Label: Rel Horiz Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 14. Type: XIValuatorClass
Detail for Valuator 3:
Label: Rel Vert Scroll
Range: 0.000000 - -1.000000
Resolution: 0 units/m
Mode: relative
Class originated from: 14. Type: XIValuatorClass
Detail for Valuator 4:
Label: Abs MT Pressure
Range: 0.000000 - 255.000000
Resolution: 0 units/m
Mode: absolute
Current value: 0.000000
Class originated from: 14. Type: XIScrollClass
Scroll info for Valuator 2
type: 2 (horizontal)
increment: 106.000000
flags: 0x0
Class originated from: 14. Type: XIScrollClass
Scroll info for Valuator 3
type: 1 (vertical)
increment: 106.000000
flags: 0x0
Class originated from: 14. Type: XITouchClass
Touch mode: dependent
Max number of touches: 2
Seems like something is overwriting the synaptiks setting so the touchpad gets disabled after KDE starts... or maybe X is disabling the touchpad and doesn't recognize the synaptiks settings..

Keyboard and touchpad not working after Windows 10 update

after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine

It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

HP Pavilion 15-p076 - Touchpad not working after yesterdays driver update

I let HP software update my computer and at first everything worked just fine. After overnight, when I boot up, there is no mouse, touchpad is not working!
I re-install drivers and touchpad is working. I boot few times, and it still works. Next day, it doesn't work anymore.
Now I have installed the drivers three times, twice today.
So is my month old laptop dead already?

Hi there @Ardevealca
Welcome to the HP Support Forums!
From the sound of things one of the updates being automatically pushed to your notebook is the source of the problem, either in combination with one of the others or with a security update. This sort of thing sometimes happens, thanks to all the possible combinations of hardware and software.
It is not likely that there is a problem with your notebook.
I would disable the automatic updates and see if the problem recurs. That way you would have more control of what updates are applied.
Turn automatic updating on or off
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Macbook touchpad button issue

I recently bought a base model macbook. The touchpad button was placed more left than it should be, thus when you click the left part of the button, sometimes it rub the body and then not only generate annoying sound but also make the click difficult. Also the distance between the right side of button and the body is a little bit bigger than that on the left which makes the macbook looks wierd.
Does anyone know how to fix it (Probably just reposite the button a little to the right) easily other than send it to apple and wait?

Not sure that this is the same, but my Macbook's trackpad responds intermittently. After MB's in use for say 4 minutes, when I try using the trackpad, it doesn't respond. Always on the left. The left side of the trackpad is unresponsive!
Other problem is the mooing or purring of my optical disk(?).
I am thoroughly disappointed at the performance and these little kinks are annoying! Not to mention the service at the Apple store, from one employee telling me to open my window to let more noise in, in order to drown the mooing/purring sound to another bribing me to buy ProCare, saying only then would they swap the FAULTY Macbook.
Disappointed. Anyone have any ideas how to go about this one?

HP Pavilion DV6-1264CA Artist Edition 2 left touchpad button is screwed up

I'm a proud owner of an Artist Edition DV6 laptop, but a few months ago the left touchpad button suffered a bit of a failure. Through normal use, the left side of the left button (the one you use to click on just about everything) seems to have broken down. I am not familiar with the inner workings of this device, but it feels like there are two underlying supports that hold the button up and allow it to be clicked down on, one on each side of the button.
A while ago, the left side of the button started squeaking while clicking, and now it sags down, and the button can be rocked from side to side. The right side of the button is still up, and it now sits on a slant. Visually it is just a minor annoyance, but what is driving me batty is that now the button essentially "clicks" on its own. It can still be used normally, but often the button will click multiple times within a fraction of a second. I only use the laptop for entertainment, but it's still annoying as hell, especially when playing games where unintended clicking can lead to irreversible actions.
I have looked into the HP catalog for repair parts, but as other Artist Edition owners have discovered, there are no specific parts for the AE model, and the only relevant part is a complete touchpad with the whole palm rest attached to it. Of course, the palm rest doesn't have the Artist Edition graphics on it, which I absolutely intend to keep.
So I was wondering, if i can locate another palm rest with the touchpad, is the touchpad transferrable to my palm rest? Or is it inseparable? Are all DV6 touchpads the same? Or alternately, if I disassemble my touchpad, what are the chances that it is repairable? Maybe something just popped out of place?
Oh, and before you ask, the laptop is out of warranty, and I'm not sure I trust the clowns at Best Buy to be able to fix it, and to do so in a timely manner. I'd rather explore all options and see if I can fix it myself first.
Any help would be appreciated.
Thanks,
Phil

Does anybody have any input? I see tons of sellers selling HP DV6 parts on eBay, I just need to know if I can swap over a touchpad from one palmrest to another, and if all touchpads are the same in the DV6-7 range.

Kernel26 2.6.28-3: touchpad doesn't move cursor, touchpad buttons work

Similar Messages

Maybe you are looking for