Keynote freezes when using smart builds.

I've got an issue using smart builds.
Any time I click on the smart build button on the tool bar or the actions tab in the inspector window, I get the spinning beach ball of death.
I'm not sure if it's an issue with hardware or software.
I've tried deleting quicktime codecs, final cut plugins, etc.
None of them seem to work.
Reinstalling iWork hasn't helped either.
Anyone else have this problem?
Thanks...

Similar Messages

Using smart previews on iMac to control two sets of identical original files on two external drives --- render previews setting when using smart previews

I’m just getting started with Lightroom and if someone can help me I’ll be very appreciative.
I’m using an iMac with a 1TB drive and two external 2.5 TB drives for backup. My active files are on all three drives and I’m running out of room on the iMac drive.
With the smart previews capability of Lightroom 5, I’m hoping to remove all the active files from the iMac drive. I hope to import existing images into the LR catalog from two identical drives with identical folders and have both sets of images reflect the changes I make using smart previews on my iMac.
I just created two identical test folders of junk images on the external drives and was following a beginners tutorial on importing. However, I see nothing about using smart previews on my iMac that, when connected, will update more than one external drive at the same time.
I’m also wondering if, when using smart previews, it matters how I set the render previews during the import process.
Many thanks for any help,
Karl Hentz

I don't see any way to use smart previews to update both external drives at the same time. The smart previews are linked to a specific set of images. But it seems to me that if both drives are in fact identical, once the catalog is updated when one of those drives is connected those changes should also apply to the files on the other drive. It's actually the catalog that gets updated, not the images. Smart previews and regular import previews are completely unrelated. How you have your import previews configured will have no effect on your smart previews.
Incidentally, in order for my suggestion to work it would be necessary to only have one of those external drives connected. And when the other EHD is connected it would have to have the same drive letter or name. In other words it would have to appear to the iMac that it is precisely the same drive.

After i updated to 10.7.5 my mac keeps freezing when using Safari

After i updated to 10.7.5 my mac keeps freezing when using Safari, I've to restart it everytime. What's the problem with 10.7.5? Is this a known problem? How can I fix it?

Go Here > http://support.apple.com/kb/DL1582 and download and Install the Combo Update.
It is Safe to install over existing.
After the Successul Install be sure to Restart your computer.

My iMac freezes when using Firefox

My iMac freezes when using Firefox. We have to restart our computer.

TutorDaddy, if this Mac is still covered by the initial warranty or under AppleCare, take it in and have it looked at. As the old label used to say, there truly are "no user serviceable parts inside." Kernel panics very usually indicate failing hardware.
I have an older iBook G4 that started developing kernel panics and like you, despite reinstalling the OS from a freshly formatted volume, they kept continuing. I looked at the crash log and saw that in each instance of panic, the last bit of code to be accessed had something to do with AirPort. Knowing that the AirPort software was at then current levels, I surmised the problem to be a bad AirPort networking card which, on that particular model of the iBook, was a very small module attached directly to the logic board. Since the computer was out of AppleCare, I broke the machine down myself (I didn't realize that there could be so many barely visible screws in one machine) and removed the offending piece of hardware. My iBook lives but without WiFi, it now sits as a more or less desktop machine needing an ethernet connection to stay connected to a network.
I do not suggest you break into your iMac. First of all, I'm guessing one would need to be able to pull off the glass and have the necessary glue to reattach it, which is not really available to us consumers. If you're feeling adventurous enough to read the crash logs from each panic, you might be able to surmise the hardware component (or badly written application or library; it can happen) that's causing the panic. If it's a software issue, remove the offending software app and see if the panics return. If it's a hardware issue, it's best to let a competent service tech qualified on Apple hardware to handle it.
[edited to add:]
After browsing through related problems in the discussions, I saw this link to a third-party web site being handed out. Perhaps you'll find it useful: http://www.thexlab.com/faqs/kernelpanics.html
Message was edited by: Stephen Adams

Error when using Form Builder

When using Form Builder to create a new form from TEMPLATE.fmb, there is an error like this:
FRM-18108:Failed to load the following objects:
Source Module:APPSTAND
Source object:STANDARD_PC_AND_VA
Source Module:APPSTAND
Source object:STANDARD_TOOLBAR
Source Module:APPSTAND
Source object:STANDARD_CALENDAR
Then, I found an file incuding the error message in the directory where I placed the TEMPLATE.fmb and APPSTAND.fmb.
Here is the main point:
FRM-30064: Unable to parse statement select timezone_code,name
,to_char(trunc(gmt_offset),'S09') || ':' || to_char(abs(gmt_offset - trunc(gmt_offset))
*60,'FM900') offset
,decode(daylight_savings_flag,'Y','*',null) dst_flag
from fnd_timezones_vl
where enabled_flag = 'Y'
order by gmt_offset.
ORA-00942: table or view does not exist
Record Group TIMEZONES
Form: STANDARD_OBJECTS
FRM-30085: Unable to adjust form for output.
How can I fix this error?
Thanks a lot,
Mike Cui
PS: I have intalled the Oracle EBS VIS, and the OS is WinXP(ZHS).

Yes, that's right.
I have fixed this error.
At the same time, I found a bug when installing Oracle EBS DEMO. That is,
FORM60_PATH in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE,is $AU_TOP\11.5.0\resource;$AU_TOP\11.5.0\form\us; But another one in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME2 is $AU_TOP\11.5.0\resource;$AU_TOP\11.5.0\plsql. I think the second one is the working path used by Form Builder. Correcting it to be same with the first one will be OK. Or you can change all of them to your own working path.
PS: Form builder is installed in the server PC which I only have:)
Message was edited by:
Mike Cui

[Help] Error when using Form Builder

When using Form Builder to create a new form from TEMPLATE.fmb, there is an error like this:
FRM-18108:Failed to load the following objects:
Source Module:APPSTAND
Source object:STANDARD_PC_AND_VA
Source Module:APPSTAND
Source object:STANDARD_TOOLBAR
Source Module:APPSTAND
Source object:STANDARD_CALENDAR
Then, I found an file incuding the error message in the directory where I placed the TEMPLATE.fmb and APPSTAND.fmb.
Here is the main point:
FRM-30064: Unable to parse statement select timezone_code,name
,to_char(trunc(gmt_offset),'S09') || ':' || to_char(abs(gmt_offset - trunc(gmt_offset))
*60,'FM900') offset
,decode(daylight_savings_flag,'Y','*',null) dst_flag
from fnd_timezones_vl
where enabled_flag = 'Y'
order by gmt_offset.
ORA-00942: table or view does not exist
Record Group TIMEZONES
Form: STANDARD_OBJECTS
FRM-30085: Unable to adjust form for output.
How can I fix this error?
Thanks a lot,
Mike Cui
PS: I have intalled the Oracle EBS VIS, and the OS is WinXP(ZHS).

You have to connect with a database user who has right to select on the table.

Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?

The documentation for Flash Builder 4 beta says that after opening flash from flash builder, I should click a "done" button in flash and flash should close and what I created in flash should be included as a component or container in Flash Builder. Using the Flash Builder 4 beta on Windows, when I click on the "create in flash" button on the properties panel for either the new flash component or container, Flash CS4 opens, I create something in Flash and no "done" button is present. Nor is anything present in the menus resembling a "done" option. Where is it?

Hi Jeffrey:
Still no done button. Now under commands in Flash I can convert symbols to flex components and containers and these show up in the Flash library.
Thanks:
Jim
Date: Wed, 30 Sep 2009 09:58:10 -0600
From: [email protected]
To: [email protected]
Subject: Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
Hi,
You may need to install FlexComponentKit.mxp to your Flash CS4 beforehand.
Jeffrey
Date: Tue, 29 Sep 2009 17:04:36 -0600
From: mailto:[email protected]
To: mailto:[email protected]
Subject: Flex Where is the "done" button in Flash CS4 when using Flash Builder 4's new flash component or container?
I apparently didn't get one. I've looked under various workspace configurations. Another thing that seems odd is that when Flash opens I get the opening panel that allows me to select the type of file and version of AS I want to use. I select new file with AS3. Any ideas on why the "done" button wouldn't be present and if the opening panel is what I should expect on opening Flash after clicking the "create in Flash" button?
>
>

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Moved to DPS forum.
You need to set up the pages appropriately for the target device. For iPad that's 1024x768.

Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?

Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?

Thanks Gary, I think I should have mentioned that I have wired my other speakers and it works fine.
I just wanted to go wireless when presenting in front of class, simply to avoid trailing wires from the macbook which I position in front of me on a desk next to the projector and the speakers are behind me next to the screen.
I have struggled to find a solution, and reading through other discussions it is a problem that perhaps only Apple can solve.
I hope the new 'Yosemite' will resolve the problem.
Thank you once again for your reply.

Performance issues when using Smart View and Excel 2010

Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
Nick

Hi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM

Windows 8 freezing when using Firefox

When I'm using Firefox or Chrome browsers the whole entire PC is freezing.
Already posted my issue on the Microsoft Community forum, where you can read the details and the troubleshooting steps I tried:
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-freezing-when-using-chrome-or-firefox/d6bad301-6c55-4469-96cb-0ec3d43e1113
Also I found another post here on the Mozilla forum, who had the same issue and he did not seem to solve it either: https://support.mozilla.org/en-US/questions/975278?esab=a&as=aaq
Please help me to fix this annoying issue! Thx!

Well, the MS site was a bust, wasn't it?
it would help to know how Firefox is configured.
Can you send me your troubleshooting information from the Firefox installation that's having issues? This is a good part in troubleshooting.
*Navigate to <code>about:support</code> via Address Bar
*Click the button that says <code>Copy text to clipboard</code>
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
Firefox has hardware acceleration set to "on" by default, but it's still young, which means some video cards or drivers might have problems with it. You can try to disable hardware acceleration to see if that alleviates your problems.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps for Firefox version 29.0 and above:
*Click the menu button [[Image:New Fx Menu]] and select Options for Windows or Preferences on Mac or Linux. For Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window, click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Note that if this issue happens in both Chrome and Firefox that it may be a system issue and not a Firefox related issue,
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How to add interface to customlize MXML Component when use Flex Builder 3?

How to add interface to customlize MXML Component when use
Flex Builder 3?

David,
I don't believe you can add the interface via the creation
dialog in FlexBuilder 3. You can always manually add the
"implements" property to your MXML Component root tag. Something
like this: <mx:VBox implements="com.mycorp.IMyInterface">
If you want autogeneration of the interface, then create an
ActionScript class with that interface and then copy the generated
functions and setter/getters into the script block of your MXML
component.

I have just upgraded to Yosemite and now Photoshop Elements freezes when using spot healing or clone stamp, is there an update due?

I have just updated to OSX10.10 Yosemite and now Elements freezes when using spot healing or clone stamp.

If you are using track pad, please use mouse and see if your issue is resolved.
Moreover, this issue has been resolved in PSE 13. You can give it atry as well.
Thanks!!

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys.. I have to restart to continue.
Does it have to do with the disk utility?
I already did the disc repair job

Open System Preferences - Universal Access and check whether 'Mouse Keys' are activated.
If so, then deactivate them. They could be the cause of your problem.
Stefan

MacBook Pro freezes when using any app other than the web browser.

My MacBook freezes when using any app other than the web browser. I can open up Google Chrome and use it all day with no problem, but if I minimize it and try to browse through photos in my picture folder or do anything that involves the Finder, the computer just freezes up and I get the rainbow wheel. If I put in a CD to play it, the computer freezes with the rainbow wheel. Any suggestions? I would like to use the mac for more things than the internet.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Keynote freezes when using smart builds.

Similar Messages

Maybe you are looking for