KEYNOTE TO DVD BURN SETTINGS FOR HIGHEST QUALITY ???

KEYNOTE SLIDE PRESENTATION W/ PHOTOS AND MUSIC WHAT IS THE BEST WAY... SETTINGS...
EXPORT OR SEND TO ? DETAILS TO PRESENT ON HI DEF SCREEN IN DVD FORMAT?

Similar Messages

Best settings for highest quality results, Blu-Ray vs DVD

I am shooting AVCHD 1080p 60fps with a JVC GC-PX100, using a Windows 7, i7-2600 3.40Ghz., 8Gb.RAM, 1 TB HDD with PE11 and a Pioneer Blu-Ray writer drive.
I'm looking to find the best settings for replay on a 55" HDTV. I have tested both BD and DVD without seeing very much difference between the two as far as video quality is concerned,
but I want to make sure I'm using the right settings for the best quality on both drives. Can someone please offer a step by step settings procedure for both BD and DVD, also which do you
think is the better route to take between the two?
Also, I have noticed there is a ghosting image after letters/numbers on faster moving content (like railroad cars) on my video even before transferring it, can anyone give some insight to what that might be and if there may be a solution ??
Many thanks for your anticipated help.

Rikko
Thanks for the reply.
Referring back to your post 4.
Additional info: When I published my test video for DVD I chose “Computer” on the Publish+Share drop-down list, then chose MPEG, Presets: HDTV 1080p 29.97 High Quality.
Saved and burned to DVD. I also did the same choosing AVCHD Presets: MP4 – H264 1920x1080p 30. Saved and burned to DVD
Let us clarify. When the end result is "...burned to DVD" in either case, are saying that you take your saved file to DVD-VIDEO on DVD disc or AVCHD on DVD disc, using another Premiere Elements 11 project on Windows 7 64 bit.
My post numbered 1, contained the step by step for taking your 1080p60 Timeline directly to DVD-VIDEO on DVD disc or Blu-ray disc format on Blu-ray disc.
If you are going to introduce intermediates in your workflow (Timeline content saved to file and then burn to disc), then I would offer the following scheme
a. 1080p60 project preset (project 1)
b. 1080p60 Timeline saved to file via
Publish+Share
Computer
AVCHD
with presets = MP4 - H.264 1920 x 1080p30 (and then under the Advanced Button/Video Tab, customize the export settings for 1080p60 instead of 1080p30)
c. Import that back into Premiere Elements 1080p60 project (project 2) and burn to disc DVD-VIDEO on DVD disc, AVCHD on DVD disc, or Blu-ray disc format on Blu-ray disc..
This is another alternative interpretation to your saved and burned to DVD.....in one project, you are doing two different exports...one to a file saved to the hard drive and after than the burn to disc (be it DVD-VIDEO on DVD disc, AVCHD format on DVD disc, or Blu-ray disc format on Blu-ray disc). If this is the case, there is no "intermediate".
There used to be the discussion about HDV to DVD-VIDEO format on DVD disc - whether HDV file should be imported into the project as source or whether the user should downsize the HDV to DV widescreen in the camera before import into a DV Widescreen Premiere Elements project. As we getting into this type of question with your 1080p60 to DV widescreen?
Please review and consider. And, then please let me know if any of the above addresses your considerations.
Thanks.
ATR

Best settings for highest quality for exporting a .mov file to h.264

Hi,
I want to know what the best settings are for the highest quality for exporting a .mov file (720p50) to h.264. I want the same quality as the original.
I want to know the data rate etc.
regards,
Jeroen
Message was edited by: Woudgraaf-AV

There is no way to get the exact same quality when transcoding from an editing source to a highly compressed H.264 QT. However, you can get a real high quality by adjusting the data rate.
However, these things depend on the length of the original. I routinely encode H.264s with good results in the 3000-5000 data rate range. I also make sure that I use multiple pass encoding. Take a short snippet of your project (10 seconds or so), and try various bit rates until you have one you like that doesn't take forever.
Andy

What's the best iTunes import setting for highest quality and universality?

What's the best iTunes import setting for highest quality and universality?

Highest quality?
Apple Lossless. (But the files are way big)
Universality?
MP3 (choose the bit rate you think sounds best and doesn't take too much space)

Is there an external cd/dvd burner-player for iMac

is there an external cd/dvd burner-player for my imac?

You can simply google for that; I'm sure there'll be plenty - just make sure it specifically states that it is compatible with Mac and the OS version you are running. I've had a LaCie for a number of years; it is self powered with FW port (they no longer make this one unfortunately); here is their non-Bluray option they have now:
http://www.lacie.com/products/range.htm?id=10058
(Personally, I prefer self powered instead of bus powered). They also sell Bluray burners.

Settings for best quality DVD

Hi,
I'm hoping someone can help me to get the best quality DVD for home movies.
I have been editing and putting the movies to DVD for a number of years and the quality has been excellent. but over the last year something has changed and the quality of the final DVD is quite poor (pixalated)
I have tested different settings in both imovie HD and idvd but it hasn't made any difference so far.
I am using the following:
Sony HDR-HC9 handycam (Recording in HDV1080i)
imovie HD 6.0.3
iDVD 7.1
Thanks for any insight you can give me!

Hi
As written - dust on lens - first thought
If You made a lot of DVDs in a row (>3 at a time) then there is a risk to burn out/harm the laser.
my list on DVD Quality - read or keep. It's long !
*DVD quality*
1. iDVD 08 & 09 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality *(movies + menus up to 120 min.)* - BEST
• Best Performances *(movies + menus less than 60 min.)* - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a shortlived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
*Blu-Ray / BD* can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to plyback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera recorde in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

AVCHD - Blu-ray: what settings for best quality?

Hi Folks,
I've got a BD-burner and I want to export my edited HD avchd footage to BD with minimal quality loss.
Can you please advice me on the right settings?
* should I go for the 'Match Sequence Settings' option in the export menu?
* or probably select 'MPEG 2 Blu-ray' option for best quality?
* what is better in terms of quality of the outcome: 'MPEG 2 Blu-ray' vs. 'H.264 Blu-ray'?
Finally, I have a question related to Adobe Encore: the same footage exported through Adobe Media Encoder in 'MPEG2 Blu-ray' (takes 13 GB), Adobe Encore reports will take only 8GB?!? I'm puzzled here. How come the same footage got exported into files with different length? Is there a way to set the Encore to export in the maximum possible quality? Where can I locate this menu setting?
Thank you very much!

Forgot to mention, I'm using CS5 and I shoot in avchd, 30fps,
1980i

Proper Motion to Final Cut Pro 5 workflow for highest quality in Final Cut.

I have read several post on Motion 2 to Final Cut Pro. I am somewhat unclear as to how to get the very highest quality Motion 2 project into Final Cut Pro 5. I am currently creating a new DV project in Motion 2, as I am working in DV in Final Cut Pro 5. I notice the Motion 2 files look blurry inside Final Cut Pro 5 when I import the Motion project file and add it to my sequence timeline. Clearly I am doing something wrong. Should I ever export from Motion as a Quicktime movie, and then add that Motion Quicktime movie to the sequence timeline? I know that the Animation codec gives the highest quality from Motion, but what about when you are using the Motion project file in Final Cut Pro 5?
As always thanks in advance for taking the time to read and reply to my Post,
Sebastian

if you're exporting using the DV codec, Quicktime displays the clip at a lesser resolution than the clip actually is, and it will appear blurry on a computer monitor.
open the clip in QT, go to "Window>Show movie properties". select the video track in the top portion of that window, then the "Visual Settings" tab. Check off the "High Quality" checkbox at the lower right of the window.
this only affects DV codec clips, from what i understand.
-bt

Best CD/DVD Burning Application For Linux?

What's the best lightweight burning application for Linux? I'm trying to avoid Brasero and K3B.

I'm currently using k3b its great as is Brasero, I would go so far as to say both are commercial quality applications. I've used growisofs for dvds which is a command line app, extremely light weight: http://wiki.archlinux.org/index.php/DVD_writing I have not used Nero Linux before though it was my favorite program on windows.
This recorder application sounds very interested, looking forward to trying this one out when I get home tonight.
Last edited by dabski (2008-05-29 01:38:28)

Export settings for best quality for pages with letters etc.

Hi, I am trying to make video of a musical piece, featuring the score of the piece with pages turning following the progression of the music. I made the video in Adobe After Effects CS5 and exported it so it would be lossless. The video itself is a .mov file and looks great when I view it in Quicktime, but when I import it into FCE the quality goes down a bit. I don't know if FCE is handling the clips correctly or if it's just for making it quicker to view. Any suggestions on export settings from FCE for best quality of a video of this nature, so that the notes are clearly readable.
Thanks in advance
Ps. It has to be in a format suitable for Youtube.

Under "Sequence" and in "Settings" and in the tab "Render Control" I have: Frame Rate: 100% Resolution: 100%.
If that is what you were referring to... but under the tab which is called RT and is located left of the timeline and left of the timecode. There I have checked : Safe RT, (Playback Video Quality) Dynamic, (Playback Frame Rate) High.
There might be a way to import the clip in better quality (so it doesn't downgrade the quality).
Was mostly trying to find out with the export but it might have something to do with this.
Thanks

Best DVD Burning Software for My Powerbook

I just got a burner and was curious as to what the best software for burning was?

The point is Popcorn does two things - compresses non-protected DVD media to fit a single DVD and some file conversions many of which you can cover with QT pro or MPEG Streamclip.
Toast 7 does as well plus is a full service DVD /CD writiing program. Popcorn came out while Toast 6 existed which did not compress.
For some reason Roxio still pitches Popcorn 2 and tries to sell it relentlessly to Toast 7 owners at a discount, which makes no sense. Since Toast 7 has the technology. I guess I should not be surprised as Roxio still pitches the new Toast 7 to people who already upgraded at a discount to Toast 7. From Roxio.
As for a DVD burning program, it is not that at all - it is a MPEG-2 compressor and that is the extent of its value other than file conversions. You cannot make data discs or anything else since that would limit sales of Toast 7.
The OP wanted a DVD burning program not a one hit wonder. Too bad you bought Popcorn, no need to flog it to people who want better.

FCE export settings for higher quality video

Hello. I'm a self-schooled newspaper video features producer and relative newcomer to Final Cut Express, shifting from Premium Elements. I've just begun using it to upload videos to my newspaper's finicky web system, which will only accept .flv files of a certain size. My modus operandi has been to export my videos as large .avi files, using Quicktime conversion and DV/DVCPRO/NTSC, with medium quality, with 16 bit sound set at 32 Khz. Then I run that .avi through the Adobe Flash Media Encoder with a frame rate of 15 fps, deinterlacing and resizing the screen to 640 by 480. This procedure (outlined by our former video editor) produces serviceable web quality video (You can see video that results from using these settings at http://wvgazette.com/multimedia). So, two questions: 1) I have created an 8-minute FCE music video for my band and wish to export it at a higher quality (for use on Vimeo) than these newspaper settings. Which of them do I change so that a higher quality video results without waiting all night for a massive file to upload? 2) And wthere might I turn for guidance on better understanding the Sanskrit of FCE video export settings for newbies? Thanks for any help.
Douglas Eye
http://hundredmountain.com

The simplest way to produce good quality video for the internet is:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it.
Do not mess about altering audio settings, frame rates etc.
Using the above settings an 8 minute video would be encoded in around 20 minutes (depending on computer speed) and would be well under 100MB.
Is that too big?
Message was edited by: Ian R. Brown

Imovie08 export settings for good quality

I'm using iMovie08 with my Canon HF100 but cannot find the best export settings for my MP4-files. The exported movie needs to run on my PS3 and my macbook. I want to export in 720p and 1080p format, using H.256 and ACC, but I'm not sure what bitrate to use for my movies to get acceptable quality. Tried using 5000k for 720p but that left me with lots of compression artifacts.
Any hints?

For 1080p try unlimited bitrate or a minimum of 16000.

Latest DVD Burner Firmware for Power Mac G5?

I'm trying to find the latest firmware for the DVD burner that shipped with my Power Mac G5, where I can find it and how to install it.
My machine ID:
Model Name:          Power Mac G5
Model Identifier:          PowerMac11,2
Processor Name:          PowerPC G5 (1.1)
Processor Speed:          2.3 GHz
Number Of CPUs:          2
The Burner ID:
PIONEER DVD-RW DVR-110D:
Firmware Revision:          AA06
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)

Hi Thomas, check out...
http://lasvegas.rpc1.org/

Is a high definition DVD burner available for Mac's?

I have a HD camcorder (Canon XHA1) and am using Final Cut express HD. I have been very disappointed in the results I have obtained when burning my Final Cut projects to a standard DVD.(After finishing my FCE project, I use IDVD to produce a disc image, then burn to a standard 4.7 GB Sony or Verbatim DVD-R) Many of my clients now have blu ray players and high def TV's and want their videos in high definition. Is a high definition burner available for a mac pro so that I can burn high definition discs?

Thanks Tom for the link. However, I noticed when reading through the info about this blu-ray drive that it made no mention of being compatible with Final Cut Express HD or IDVD which is what I am currently using. I had considered upgrading to Final Cut Studio but it sounds like this drive is only compatible when used with Adobe Premiere Pro and Encore CS4. I am no techie, so pardon my ignorance about all this. Is Toast a "replacement" for IDVD? Could I use FCExpress (or FC studio if I upgrade) then burn the DVD using toast? Does Toast have menu templates like IDVD?
If anyone has any experience using this blu-ray drive on their Mac with Final Cut and IDVD or Toast I would appreciate some input on what the exact workflow is and if the whole process has been a positive experience.
Thanks so much for your help!

KEYNOTE TO DVD BURN SETTINGS FOR HIGHEST QUALITY ???

Similar Messages

Maybe you are looking for