Keys 5-9 no longer work after water damage. Do I need a new logic board?

I had the smallest amount of water on my fingers when I typed something on my keyboard and now keys 5-9 no longer work. Will I need a whole new logic board for this? I've been into two Apple stores and both say I need to book an appointment online. I've been online and tried to book in at three different Apole stores within my area and I just get 'there are no slots available' how am I supposed to get this fixed if I can't book a session to see some!?! Sort it out Apply, it's why your products cost so bl**dy much isn't it!?

thanks, but I really don't think its the logic board since I can still plug in head phones and i can hear movies, etc.
also when i don't have my magicJack plugged in to make calls they now give you a magictalk dial pad to make calls and when i plug in the headphones again i can talk through the speakers and be heard and I can hear them too. Is there something I can used to maybe pull out the connection. I think it thinks the headphones are plugged in all the time.

Similar Messages

My iPhone 4 is water damaged and I need a new phone, do I have to make an appointment or can I walk in store and pick one up

My iPhone 4 is water damaged and I need a new phone, do I have to make an appointment or can I walk in store and pick one up

Make appointment
Bring credit card
Allan

Water spilled on MacBook, need to replace Logic Board--worth it to send it in for total repair (where it will be like "factory new")?

Thursday--I spilled water on the keyboard of my MacBook Pro 15", and it immediately turned off. I unplugged it from the charger and turned it upside down, and then began to dry it off the best i could with a towel while letting it drain. Then I took it straight to the Apple store on my campus, where a technician removed the back, took each part out separately, and then dried it/the parts out the best he could. He advised me to wait a day or two and then try to turn it on.
Saturday--I used a hair dryer on low heat to help dry it out the best I could, and then I tried to turn my computer on. It wouldn't work, but when I plugged it into the charger it did turn on. The screen looked a little waterlogged and was flickering slightly. I took it back to the store and they said that their technician would look at it.
Wednesday--I went back to check on the status of my MacBook, and the guy presented me with two options:
I can replace the Logic Board for approx. $500-600 and be done with it (and eventually the moisture in the screen, which is clear as ever now, will dry up?)
or
I can send my entire MacBook back to the factory for replacement/repair of anything that might need fixing for around $1300-1400.
I am currently on my MacBook now, and it seems to be working just fine (although it has to stay plugged into a power source because the battery won't charge)...
Money isn't an issue here, yet (it was bought with an AmEx and is covered with that warranty up to a certain dollar amount), but my question is this: Is it necessary for me to replace my Logic Board, if my computer still seems to be working--or will I end up seeing issues down the road if I don't and Should I go ahead and send it in for a full factory repair?? Is it really worth it??
Thank you!

It would be best to send your MacBook in for a complete overhauled, this will save you time and trouble in the near future. I am sure you have some items internally that will continue to corrode and render your MacBook inoperable some day soon.

My iPhone 4 only partially works after water damage...

Basically, I dropped my iPhone 4 down the toilet (which was stupid of me in the first place) and got it out of the water as soon as possible. I let out as much excess water as humanly possible without the tools, as I didn't have any on me at that point, and so I let it dry out. It wasn't working at all the next day until I had taken the back off and now I have got it to the stage of turning on and partially working.
When plugged into a power socket it will turn on as usual and get to the screen telling me to plug it into iTunes, but when I plug it into the computer it will turn off and on at the silver Apple logo which means I can't connect it to iTunes. In both cases, as soon as I unplug it, it turns off straight away, but when plugged in it says that it has 100% battery.
I wasn't sure where the major problem was and so I sent it off to a company who fixed that sort of problem, but they told me that there was some corrosion on the inside and that they were unable to fix it which was a pain, and because Apple don't cover liquid damage I don't know what else to try... I bought a new battery just in case the battery had become flooded, but this made no difference so it's definitely not the battery directly.
Has anyone else had this problem and is there a good solution that might help? (And if possible I would like to keep what is on there, but this is not essential...)
Thanks,
Ben

IF you would have taken it to Apple, you could have gotten it replaced for US$199. Now that it's been opened by a 3rd party, they will most likely not permit this. If there is corrosion on the inside, it's most likely permanently borked. Sell it for what you can get for parts and buy a new one.

Can't get new logic board hint to work

after days of trying to resolve my new logic board problem of my time machine back ups not being recognized through using the terminal as suggested, i am giving up for now. i will keep my external hd and the info on it and just back up my important stuff to dvds for now. Is there any other way to get the info off my external hard drive back up so that it would make sense to my computer with a new logic board. Any program, etc.

I assume you are referring to this mac os x hint
http://www.macosxhints.com/article.php?story=20080128003716101&query=Time%2Bmach ine%2Blogic
You need to know some basic unix knowledge to follow this hint. If you can't make it work there is no other way to do it. there are no programs for that either. you should start a new backup sequence. You can still access your old backups via browse mode. control-click on TM in the dock and choose "browse other TM disks".

HP OMEN Control Software No Longer Works After Windows 10 Upgrade

HP OMEN Control no longer works after the recent Windows 10 update. Profile switching, keyboard LED colors, zones, fn key options, etc. no longer respond at all. I've found references to this issue during Windows 10 beta testing. Is there a temporary workaround? Will there be a driver update to remedy this problem? Thanks.

I just purchased a new 2015 refurbished PC. It worked great with Windows 8.1. Upon installing Windows 10, The Omen control did not work as well as the fan. Really - hardware failure. Give us a break. So, I went back to Windows 8.1. Also this year, I purchased an Envy X2. This PC included a bluetooth keyboard that kept detatching. Again - REALLY, the keyboard doesn't work. That's a pretty important part of the PC. I searched the forum for answers and all I found was the same old line that HP was working on it. I found meesages over a year old that had this same problem. So, back it went to Best Buy. I used to really like HP computers, but now, I can't say that anymore. So, do I trust HP to fix this in a timely manner, NO. Why - because they had to know about this issue alrady for quite a while. And, they did not fix it. I really hope they prove me wrong.!! I will give them 1 more week to fix it. After that, the PC will be returned. And HP PCs will be off my scratched off my list, except maybe the HP Spectre X360. To my amazement, I am even considering a MacBook Pro. Funny thing - the Spectre X360 is supposed to be a great laptop, But, Microsoft was heavily involved in the design process. That is certainly not an HP confidence buider. HP - THIS IS YOUR TIME TO "STEP UP TO THE PLATE" and fix this mess. TImes like these are opportuniies to win over customers or loose customers to the competiion. I really want to keep this PC. It is by your response to this problem that will determine the outcome.

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

IPhoto no longer work after upgrading to Mavericks.

My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

Many Apps are no longer working after webOS 1.4 update! - please help!

Hi,
Many of my previously working Palm Pre Apps are no longer working after the webOS 1.4 update.
Here are the ones that just return a blank/white screen after launching so far:
SplashID
Daily Devo
Daily Light (Love)
Absolute Fitness (some options no longer work correctly & are returning a white screen and some options are working)
These are just a few of the Apps that I am having problems with and there are probably many others. I have also sent emails/posted to forums on the developer sites to advise. Hopefully I will hear something back soon.
Anyone else experiencing this issue as well with any Apps?
Thanks in advance for any help that you can provide.

SplashID on my Sprint Pre is showing just a blank screen after starting it and entering my password. I see no update for it in the App Catalog.
EDIT: Never mind. It appears that it only did that on the first launch. I closed it and restarted it, and now the screen in SplashID is correct.

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Internet Explorer 9 no longer works after an uninstall of HP Support Centre

Internet Explorer 9 no longer works after an uninstall of HP Support Centre and drivers for 3 HP All-in-One printers (psc1310, C4180, F4200). Intend to re-install for just C4180. I selected option to remove for all related software, though the HP Update and Photosmart Essentials have been left. IE9 stops working when launched (even when launched with no add-ons and with Protected Mode disabled and Advanced Settings restored) and regardless of initial URL. If I remove the IE9 update then IE8 works fine. I tried re-installing IE9 update, twice, and it continues to fail.
I’m running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster and Spybot - Search & Destroy.
This question was solved.
View Solution.

I now believe the problem with IE9 was not related to HP, but to a Windows Update replacement to the “Intel Corporation - Display - Mobile Intel(R) 4 Series Express Chipset Family” drivers: Intel Corporation Display software update released in February, 2011 (useless link http://winqual.microsoft.com/support/?driverid=20411791). IE9 started working OK when I set “Use software rendering instead of GPU rendering*” (see http://forums.whirlpool.net.au/archive/1678709 with reference to “faulting module igdumdx32.dll”), so will now investigate removing that update.
Sorry to have cast aspersions on HP. MS did this to themselves, as usual.

Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
-Roger

Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

Internet sharing no longer works after Lion 10.7.4 update

Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

so here is da answer
1. go to finder>(computer name)>macintosh HD>library>preferences
2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
3. restart mac and device which you share intenet to
then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
then, just wait for apple to release da 10.7.4 fixed
please use da steps!

Keys 5-9 no longer work after water damage. Do I need a new logic board?

Similar Messages

Maybe you are looking for