Kill auto updates

Have both iPhone 4 and iPad 1. Constantly pestered with auto updates (nagware). Don't want to update or upgrade because things on both devices work just fine. "If it ain't broke . . .". Anybody?

There is no setting for that it, it just checks everytime you plug your idevice in...but you can "block" it if you prevent itunes from accessing the internet (firewall) or if you don't want to do that you can disconnect your computer temporarily and sync.

Similar Messages

Kill auto-updating in Firefox 30.0?

How can I disable auto-updating in Firefox 30.0?
Then how to do it manually?
(I HATE morning surprises followed by troubleshooting FF browsers on 4 laptops,)
Thanks...
(Lion 10.7.5)

Sorry, Marketing was a bad choice of words. Perhaps, “a narrow perspective” would have been a more accurate and less pejorative expression. I apologize.
What struck me about the reply was that it was totally Firefox-centric and not a user (this user’s) friendly push.
I know updating makes things safer and better and I always update. But, it’s the nurse coming into the hospital room at 3:00am to give you your medicine. I don’t need meds at that hour. It wakes me up. I lose sleep. I am being denied rest and sleep because the floor nurse is behind her meds rounds. That’s what is so irritating about being injected with an update without warning.
To be honest, I can’t recall all the little “re-jiggering” moments that occur, but they do occur. Usually, it’s its a feature that disappears from my customized theme that I require for my normal usage. I’ll lose things from the Toolbars that I previously installed and must relocate them again, usually right in the middle of a function. That’s distracting and irritating.
Just tell me that there is an update and I’ll make a little convenient time period of five minutes to perform the update.
It feels good when I perform the upgrade task. It feels somehow invasive when someone just shoves it up my browser when I’m not looking. Simple. Why is this so hard to understand?
It’s human, not technical.
Again, this question is still unanswered; Is there a way I can be notified of an update that I can perform at my own convenience?
--JP

How do I prevent auto-updating of ATV software?

My problem is that I have HughesNet, which has a fair usage limit. Unless either I, or Apple, can schedule ATV updates to a 2:00 - 5:59 a.m. window, the updates kick us into slower than dial up for 24 hours.
I'm running 2.3 right now with my ATV wanting to install an update...probably the one that kicked us into fair access penalty the day before yesterday. I can see no option in the menu to manually control auto-updating. I understand there used to be one, but I can't find it.
So far my only option is to kill the power to ATV. But that's not going to prevent updates while it's running.
Any ideas?

I just got off the phone with Apple tech support. He said that there is no auto-update, but we made sure that ATV wasn't somehow using any auto-update permissions in either Software Update or iTunes.
Here's what I noticed. When I would turn my ATV back on by restoring the power and go to General, the Update Software line had the spinner going. When I would click on that I was given the choice to continue the update or to do it later. I chose 'later'. Going back to Update Software showed no spinner.
However, it looked like every time I changed what the ATV was doing and then checked General, Update Software had gone back into the spinning mode. If the Apple tech rep is correct, that spinner wasn't indicating that a download was in progress, just that one was available. I'm not sure I believe that, since something went after 260 meg plus of download the other day when all of the Macs here were asleep and the only functioning machine was ATV. That's what helped in a big way to trigger the fair usage idiocy of HughesNet.
This morning at 3:30 a.m. I got up and triggered the update. 360+ Meg later it was ready to install when I woke back up.
Today, now running under then latest upgrade, the Update Software line has no spinner.
Whether the problem has been solved is unclear. But I have decommissioned any auto-upgrade capabilities on Software Update and iTunes. We'll see when Apple launches the next ATV software upgrade.
Props, however, to Apple's tech call availability. It's down toward the left corner of Apples's home support page.

App auto-updates and magazine/newspaper updates won't happen anymore

My iPad Air is running latest iOS, with 33G free memory. I have app auto updates turned on since iPad Air came out and landed into my hands. It worked great since then. But, Oct 13 is last that happened. Since then 29 updates are pending, yet not downloading. Trying to update manually, the circle doesn't even spin. Also, cannot download any new issues in Newsstand, thus behind by one or two issues on each. Probably related. I looked on the web for solutions, tried them all, to no benefit:
- Cold rebooted the iPad.
- Logged out of and into my Apple ID.
- Reset iPad network settings.
- Killed AppStore app, restarted it.
- Changed the language to something else, then back to English.
- Restarted all AppleExtreme routers at home; I have 4, one main, 3 in wired bridge mode, all running latest firmware.
- I disconnected/"forgot" my home network connection on iPad, then reconnected.
- I even went to another WiFi network at a Dr's office I had never been to, thus using a totally fresh network connection.
- I reentered all my credit card info into my AppleID.
None of these worked, some after trying multiple times. Still can't get my new issues of Time/People/Entertainment Weekly, and can't get my 29 app updates... And no alerts or any other indication of any problem. Access to Internet works, obviously. Seems like a problem with something in my account... "Emailed" Apple Support using a form I found on this Support site, it said 24hrs turnaround time, but I didn't get anything back, yet.
What to do??

same here for 4 months now, and noone seems to be able to address the issue here.

Adobe Auto Updater

I did a search on this and found nothing, but I am sure I have read about how to shut off or remove the infernal Adobe Auto Updater that pops up every time I boot up, I use a triple boot setup, so that happens several times a day. Anyone know how to do that? WinXP Pro machine.

I found the reference I was looking for. There are several ways to kill the updater, but the easiest is to simply remove the Updater 5 folder from Program Files>Common Files>Adobe.

SBS2011 workstation auto updates / can IE upgrades be specifically turned off ?

SBS2011 workstation auto updates
I have a weird situation that requires the client pc's to run lower versions of IE and can't use 3rd party browsers (must be IE). I would rather not turn auto updates off completely but the IE version updates is killing us.
Can the IE upgrades be specifically turned off while allowing the other updates?

there are internet explorer blockers to stop ie9 or 10 from being installed if that helps.
Guzzifrank

Auto Updater for FlashPlayer for Mac

Folks!
MacBook Pro 15" Retina OSX 10.8.4
Auto updater keeps coming up with a message: Flash player update available. But after downloading the update and trying to install it, a warning pops up saying "Safari and Firefox need to be closed" The weird thing is, I do not use Safari so it's never launched, so there's nothing to close, right? The updater still keeps coming up with the same message anyway. This way no update of Flsh Playwer ever gets installed...
Any advise? Any idews?
Big thanks, Jan

Download the offline installer
Quit Firefox (reboot if necessary to kill all processes)
Go to: Mac HD/library/Internet Plugins
Trash the Flash Player.plugin file
Go to: MacHD/Library/Application Support/Adobe
Trash the Flash Player folder
Empty the trash
Mount the DMG and run the Flash Player installer
Relaunch Firefox
You should be good to go

Firefox auto-update bounces back end forth between 3.6.11 and 3.6.12

Firefox keeps going through the following apparently endless cycle: It realizes it's not on the latest version and auto-updates from 3.6.11 to 3.6.12. Everything is fine for a few uses, then it tells me it needs to reboot to complete an update, upon which its "completion" of the update results in it reverting back to 3.6.11. After a few uses of that version the entire cycle repeats (It again wants to install an update to 3.6.12)... and so it continues

You can check for a problem with the prefs.<br />
See http://kb.mozillazine.org/Preferences_not_saved

Client Auto-Update questions

We just updated our Dev system to SP5 with Patch 2, but the clients are not updating automatically.
I have checked that the Client and Admin boxes are checked for auto-update and can see nowhere else that this can be done.
I double-checked with the Master Install guide, and this appears to be the only thing that I need to do to make it work.
The clients are currently at 502, and they should now be 506.
Also, is this controlled by the files in C:\BPC\Websrvr\Web\Installation?
I have checked the live server (BPC 5.1 SP3) and the Dev server (BPC 5.1 SP5r2)
Both of them have EverestClient.exe and EverestAdmin.exe with version number 12.0.0.49974
Does that seem right? I would have expected an increment in version number.
Has anyone else seen this, and can you offer any advice?
Thanks
Craig
Edited by: Craig Aucott on Feb 23, 2009 9:46 AM

Here is an extract from the note:
It does not say about the Patch! sorry...
the note is 1269662
Summary
Symptom
The Client Auto Update feature does not work in 5.1 SP5.
Other terms
auto, update, client, upgrade, install
Reason and Prerequisites
This is due to unintended consequences of fixing IM 3569686 issue in SP5.
Solution
Remove the '<remove name="Documentation"/>' node from the web.config file located in the x:\bpc\websrvr\web directory and save.
Once all clients have been updated, add the node back to the file.
The node is found in the following section:
<globalization requestEncoding="utf-8" responseEncoding="utf-8"/>
<webServices>
       <protocols>
            <add name="HttpSoap"/>
            <add name="HttpGet"/>
            <add name="HttpPost"/>
            <remove name="Documentation"/>
        </protocols>
</webServices>
Header Data
Release Status:     Released for Customer
Released on:     25.11.2008 19:51:41
Master Language:     English
Priority:     Correction with high priority
Category:     Program error
Primary Component:     EPM-BPC-MS-SVM-OTH Other
Hope this helped
Bye

How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

Auto update of Schedule Agreements

Once a schedule agreement has been created will MRP auto update the delivery date (for JIT) if the lead time is zero days and the new need date is today?

You need to check what is the procedure (T-Code) from which the data gets updated into these tables.
For example
when we craete a material from MM01 the data gets updated in the corresponding table i.e. EKPO.
In same way you need to find the process and then you can use BTE (Busineess transaction events) for that process. BTE are only for FI module and these tables are also related to FI .

My firefox recently updated. Now my pop mail server won't work. I did a 'restore' to last week, and it was fine. It has now auto updated. No mail server.

I have read through several responses to others who are having problems following an update. I am not computer savvy enough to understand half of the recommended 'solutions'. I need clear and definitive instructions of what to do. (Instruction for 'dummies' is what I need.) I can not 'restore' my computer continuously, only to have the auto updates cause the pop mail server to stop working each time. If there is nothing I can do, I guess I will have to stop using Mozilla Firefox. Can you help?

There is no solution for Firefox and POP. Firefox doesn't do email and has no need for a POP email server.
If you are using Firefox to view and send "email", you are accessing a webmail service provider.
http://en.wikipedia.org/wiki/Post_Office_Protocol

Crashing on start up, auto-updating even when disabled & not allowing a safe toolbar add-on to download

I have followed all of the steps in all of the relevant help articles (http://support.mozilla.org/en-US/kb/firefox-crashes-troubleshoot-prevent-and-get-help#w_get-help-fixing-this-crash), and nothing has fixed this problem.
I was running v17, and yesterday it auto-updated to v18 when I opened firefox. As soon as it updated it crashed, pressing 'restart firefox' did nothing, I could only quit. So I found an old install file, went back to v17, checked the option to ask permission before updating, run malwarebytes and spybot, so my PC is clean. This morning, same thing happened - auto update with no warning or permission given. Crashed. Repeatedly, restarted, closed everything else that was running, uninstalled and reinstalled the older stable version. Both times I spent a long time reinstalling add ons and themes. On top of that my goodapp toolbar from goodsearch will no longer be installed by firefox because 'it can't modify the necessary files'. All other add ons work fine, and I was using this toolbar with no issues in v17 only yesterday.
The second reinstall I clicked the option 'never check for updates'. But tonight, when I opened firefox, it updated without warning to v18 again and I was ready to switch to chrome after a decade of using this browser. There was no Firefox (safe mode) to run from my program files, and since I couldn't open the browser at all before it crashed, all I could do was uninstall and reinstall v17 for the third time in 24 hours and as you can imagine I am not very happy that your so-called stable release is anything but that. I think with the number of people having problems that you should stop work on v20 and actually accept there is a problem with this release instead of trying to blame it on malware.
Latest crash report ID: bp-3ea35888-008f-4e21-b31f-023002130112

This crash is usually caused by to malware and the involved randomly named file in your case is astktkra.dll as you can see in the modules list of the crash report.
Try to use MSConfig and disable that file to prevent it from getting started.
*http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) to see if that allows to locate and remove the file either manually or with a malware scanner.
You will have to search the Windows registry (Ctrl+F) for references to that file and export and remove involved keys to avoid startup issues with missing files or alternatively use a registry cleaner like CCleaner.
If you are not comfortable with editing the registry then it is best to skip this step.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Won't open at all after auto update!!! dead in the water!!!

yesterday I was informed that an auto update had been done. for 6.blah.2 or something. I don't know. I was immersed in the constitution and Thomas Jefferson was waxing his ass. Anyway last night I shut down, all is well in the world. This morning I try to log on to see if my prof has any news for me...nothing. You know, no coffee, perhaps I'm not awake, kidnapped by ailens. So I shut down and try again. Nothing. But IE worked...So here I am...What is up?

Firefox will not start
* https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start
* http://kb.mozillazine.org/Browser_will_not_start_up
Check and tell if its working.

How do I disable linked smart-object auto-update/refresh?

Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex. This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
How do I disable linked smart-object auto-update/refresh?

If you do not like a feature like smart objects there is nothing forcing you to use it. Use some other features to do what you want. Please don't ask Adobe to introduce bug into smart object support.
You could work on your bump maps textures in external files. When your done some time in the future you could edit your project with the smart object layer and use replace smart object. Only then will all smart filters be applied to the smart layer with the replaced smart object.
Or if by CC Auto save Layer you referring to CC Generate feature you can disable that feature.
I have no idea what your referring to when you write "CC auto-saves the layer" being a feature. I know CC Generate will write layers out as web files but that more a Web feature then a 3d feature. Where do you see your layer being saved?

Kill auto updates

Similar Messages

Maybe you are looking for