Kinect for Windows V2 Device cannot start

Question

I was able to use my Kinect for Windows V2 sensor yesterday with all of the applications in the SDK browser but the next day after restarting my computer I was no longer able to use the device. Looking at the device manager I get this message under the properties
for WDF KinectSensor Interface 0 (the only device listed under Kinect sensor devices):
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
I'm plugged into a USB 3.0 input. Any ideas?

Answer 1

I encounter the exact same issue:
WDF KinectSensor Interface 0
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
I'm using an Intel 4ghz i7 processor plugged into an ASUS Sabertooth Mk1 Z97 Motherboard. The ASMedia on the board had some issues, so i'm using a USB 3.0 PCI/E card by Manhatten. Diagnostics indicates that everything but depth checks out. Depth fails because
the camera reports all black.
This is particularly frustrating since I built this computer to offer USB 3.0 support specifically so I could do work with Kinect and Unity. This was before I knew the issues Kinect has with ASMedia, so for me this has been a significant investment for a
black screen.
Edit: To clarify, the Kinect is plugged into the PCI/E card (Manhatten 150491) and not into the board or a case slot.
Additonal note: The Kinect does not function properly plugged into my old PC (a USB 2.0 with an i7) or into my Surface Pro (1st gen)
- Matt Eland