KKO0 Reports showing no records

Dear Experts
I am trying to Execute the KKO0 Report but system is showing "No records were selected", i ran the KKRV it has done completed successfully.
Could any one please help.
Thanks & Regards,
Harinath.

Dear Sir,
Thanks for the Reply,
I ran the KKO0 reports for the same period for which i executed the KKRV, i will check this note and let you know.
Thanks,
Harinath

Similar Messages

  • Witholding tax report show "no record were selected". tcode S_P00_97000134

    Hello everyone.
    i need some help.
    i found some document that have witholding tax in document such as 5105620781 year 2011.
    in transaction code S_P00_97000134 that use for print witholding tax report and witholding tax certificate.
    when i run this transaction code for print witholding tax certificate or witholing tax report.
    system show "no recored were selected"
    i attached excel file to show you what document that cannot print witholding tax, and what document that can print witholding tax.(there are 2 tab in excel )
    please clarify why some document cannot print witholding tax certificate.
    below link ,you can see my example. (it's excel file)
    http://www.mediafire.com/?rokkgg3vtn1aw81
    Edited by: dittaporn nanasilp on Mar 22, 2011 6:34 AM

    Dear all,
    first of all the report runs if You posted some documents with the WIthholding tax.
    When You run the report You will insert the Output group.
    Please be informed that the report will extract the documents on the base of the following customizing:
    IMG --> Financial Accounting --> Financial Accounting Global Settings --> Extended Withholding Tax -->Reporting -->Generic Withholding Tax Reporting --> Define Output Groups
    choose Your output group double click -->
    You can choose among:
    Cleared vendor invoices, Credit memos, open Down payments
    all vendor documents
    all customer documents
    and so on.....
    Please check which documents with the Withholding tax data You need to extract.
    save and run again the generic report.
    Now It should work fine.
    I hope this helps.
    Mauri

  • How to show 'No Records Found' and 'Employee Name Unknown' in oracle report

    Hello,
    I'm using 6i and building a report to show employees who have incorrectly input their time. I have an input parameter so a user can select a specific employee by emp_id or can leave it empty to show all. That part works. I also have date parameters that are required. That works too. However I am having trouble displaying 'NO Records Found' if the date parameters have no late or rejected employee time records. I currently have it as a text field arranged behind the emp_name field which i filled white. It works...however i have a pretty good feeling there is a better way to do this. Also, I have some data that is null since i am using two tables. There are time stamps with no emp_name or emp_number. I still need to show these records but want them to show up as "Employee Name Unknown" that way the user doesnt get confused and thinks the emp_name in the row above also includes this row.
    select e.location "Clock Location",
    e.emp_no "Emp No",
    l.first_name ||' ' || last_name "Name",
    e.time_stamp "Time",
    from emp_time e, master_all l
    where e.emp_no (+) = l.emp_no
    and e.status = 'rejected'
    --and e.emp_no  = nvl (:p_emp_no, emp_no)
    --and e.time_stamp between :p_start_date and :p_end_date                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Hi,
    So, when the join between emp_time and master_all produces no rows, you still want one row of output, saying 'No Records Found'; is that right?
    If so, you can outer-join the result set to dual, with some join condition that accepts anything.
    Use CASE (or equivalents) to get special values (like 'No Record Found' or 'Employee name unknown') when certain columns are NULL.
    For example:
    SELECT     j.location     AS "Clock Location"
    ,     j.emp_no     AS "Emp No"
    ,     CASE
              WHEN  j.name     IS NULL
              THEN  'No Records Found'
              ELSE  j.name
         END          AS "Name"
    ,     time_stamp     AS "Time"
    FROM     dual     d
    ,     (     -- Begin in-line view j, join of emp_time and master_all
              SELECT     e.location
              ,     e.emp_no
              ,     CASE
                       WHEN  l.first_name IS NULL
                       AND       last_name    IS NULL
                       THEN  'Employee name unknown'
                       ELSE  l.first_name || ' ' || last_name
                   END     AS name
              FROM      emp_time     e
              ,     master_all     l
              WHERE     e.emp_no (+)       = l.emp_no
              AND      e.status (+)       = 'rejected'
    --           AND     e.emp_no (+)        = NVL (:p_emp_no, emp_no)
    --           AND       e.time_stamp (+)  BETWEEN :p_start_date
                                             AND        :p_end_date
         ) j     -- End in-line view j, join of emp_time and master_all
    WHERE     d.dummy     != j.name (+)
    ;In an outer join, all conditions involiving the optional table need a + sign; otherwise, the effect is the same as an inner join.
    The message 'No Records Found' is a string, so it has to go in a string column.
    I put it in the "Name" column, just because I knew that "Name" was a string.
    You can put in in any other column if you wish. If that column is not already a string, then use TO_CHAR to make it a string.
    You could also have a column just for this message.
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data.
    DOUBLE U wrote:
    I've tried nvl in the select statement but since emp_name is a concatination of first and last name it doesnt work. This is what i have tried
    nvl(l.first_name|' '||l.last_name,'NO EMPLOYEE RECORD FOUND') "Employee",I assume you meant to have two | characters, not just one, after first_name.
    The first argument to NVL will never be NULL in that case; it will always contain at least a space, whether or not the other columns are NULL. You could say:
    NVL ( NULLIF ( l.first_name || ' ' || l.last_name
        , 'NO EMPLOYEE RECORD FOUND'
        )        "Employee",bujt I find it less confusing to use CASE, as shown above.

  • Incomplete Data on report (report does not show all records from the table)

    Hello,
    I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
    Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
    I'm using CR XI runtime on Windows Server 2003
    Any help appreciated
    Thanks!

    Sorry Alexander. I missed the last line where you clearly say it is runtime.
    A few more questions:
    - Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
    - What is the exact version of CR you are using (from help | about)
    - What CR Service Pack are you on?
    And a troubleshooting suggestion:
    Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
    Download the modules utility from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
    and follow the steps as described in this thread:
    https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
    The download also includes instructions on how to use modules.
    Ludek

  • ALV GRID Report is not showing all records which is in internal table

    hi all,
    have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input.   Example:   it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
    temporarily i have given excel output file from it_main table. excel file is showing all records.
    here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
    please give me some idea.
    FORM display_alv_report.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_buffer_active          = 'X'
          i_callback_program       = sy-repid
          is_layout                = wa_layout
          it_fieldcat              = it_fcat
          it_events                = it_events
          i_save                   = 'A'
          is_variant               = wa_variant
        TABLES
          t_outtab                 = it_main
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE text-204 " 'Error in Display the list'
        TYPE 'I'.
        LEAVE TO LIST-PROCESSING.
      ENDIF.
    ENDFORM.            .                    "DISPLAY_ALV_REPORT
    Best Regards,
    Srinivas

    hi
    Please study this program and give me suggestions.
    ALV Declaration
    DATA : it_events TYPE slis_t_event,               "ALV event
               it_fcat   TYPE slis_t_fieldcat_alv,        "Field catalog
               it_list_top_of_page TYPE slis_t_listheader,
               c_tabname  TYPE slis_tabname   VALUE 'IT_MAIN'.
    DATA : wa_layout  TYPE slis_layout_alv,
                wa_event   TYPE slis_alv_event,
               wa_fcat    TYPE slis_fieldcat_alv,
               wa_variant TYPE disvariant.
    START-OF-SELECTION.
      PERFORM material_pass.
      PERFORM data_retrieval.
    END-OF-SELECTION.
      PERFORM sub_display_report.
    FORM sub_display_report .
      DATA status(1).
      IF r1 = 'X'.
        PERFORM build_fieldcatalog USING :
          '1'  'ERDAT'     'S.O DATE'             '' '10'  'X',
          '2'  'VBELN'     'SALE ORDER'           '' '10'  'X',
          '3'  'POSNR'     'SALE ITEM'            '' '6'   '',
          '4'  'BSTKD'     'CUSTOMER PO'          '' '35'  '',
          '5'  'BEZEI'     'REASON FOR REJECTION' '' '40'  '',
          '6'  'PLNUM'     'PLANNED ORDER'        '' '10'  '',
          '7'  'AUFNR'     'PROD.ORDER.'          '' '12'  '',
          '8'  'MATNR'     'MATERIAL NUMBER'      '' '18'  '',
          '9'  'MAKTX'     'MATERIAL DESCRIPTION' '' '40'  '',
          '10' 'WERKS'     'PLANT'                '' '4'   '',
          '11' 'KWMENG'    'SALE ORDER QTY'       '' '15'  '',
          '12' 'VRKME'     'UNIT'                 '' '4'   '',
          '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13'  '',
          '14' 'IGMNG'     'CONFIRMED ORDER QTY'  '' '13'  '',
          '15' 'GMEIN'     'UNIT'                 '' '4'   '',
          '16' 'MENGE'     'G.R QUANTITY'         '' '13'  '',
          '17' 'SOBAL'     'S.O BALANCE'          '' '13'  '',
          '18' 'PRDBAL'    'PROD.BALANCE'         '' '13'  '',
          '19' 'GSM'       'GSM'                  '' '4'   '',
          '20' 'SIZE1'     'SIZE1'                '' '10'  '',
          '21' 'SIZE2'     'SIZE2'                '' '10'  ''.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            filename              = pathname
            filetype              = ftype
            append                = 'X'
            write_field_separator = 'X'
          TABLES
            data_tab              = it_mains
          EXCEPTIONS
            file_write_error      = 1.
        IF sy-subrc = 0.
          status = 'S'.
        ELSE.
          status = 'E'.
        ENDIF.
      ELSEIF r2 = 'X' OR r3 = 'X'.
        PERFORM build_fieldcatalog USING :
          '1'  'ERDAT'     'S.O DATE'             '' '10'  'X',
          '2'  'VBELN'     'SALE ORDER'           '' '10'  'X',
          '3'  'POSNR'     'SALE ITEM'            '' '6'   '',
          '4'  'BSTKD'     'CUSTOMER PO'          '' '35'  '',
          '5'  'BEZEI'     'REASON FOR REJECTION' '' '40'  '',
          '6'  'PLNUM'     'PLANNED ORDER'        '' '10'  '',
          '7'  'AUFNR'     'PROD.ORDER.'          '' '12'  '',
          '8'  'MATNR'     'MATERIAL NUMBER'      '' '18'  '',
          '9'  'MAKTX'     'MATERIAL DESCRIPTION' '' '40'  '',
          '10' 'WERKS'     'PLANT'                '' '4'   '',
          '11' 'KWMENG'    'SALE ORDER QTY'       '' '15'  '',
          '12' 'VRKME'     'UNIT'                 '' '4'   '',
          '13' 'GAMNG'     'PROD.ORDER QTY'       '' '13'  '',
          '14' 'IGMNG'     'CONFIRMED ORDER QTY'  '' '13'  '',
          '15' 'GMEIN'     'UNIT'                 '' '4'   '',
          '16' 'MENGE'     'G.R QUANTITY'         '' '13'  '',
          '17' 'SOBAL'     'S.O BALANCE'          '' '13'  '',
          '18' 'PRDBAL'    'PROD.BALANCE'         '' '13'  '',
          '19' 'GSM'       'GSM'                  '' '4'   '',
          '20' 'SIZE1'     'SIZE1'                '' '10'  '',
          '21' 'CUT1'      'CUT1'                 '' '11'  '',
          '22' 'SIZE2'     'SIZE2'                '' '10'  '',
          '23' 'CUT2'      'CUT2'                 '' '11'  '',
          '24' 'SIZE3'     'SIZE3'                '' '10'  '',
          '25' 'CUT3'      'CUT3'                 '' '11'  '',
          '26' 'SIZE4'     'SIZE4'                '' '10'  '',
          '27' 'CUT4'      'CUT4'                 '' '11'  '',
          '28' 'SIZE5'     'SIZE5'                '' '10'  '',
          '29' 'CUT5'      'CUT5'                 '' '11'  '',
          '30' 'SIZE6'     'SIZE6'                '' '10'  '',
          '31' 'CUT6'      'CUT6'                 '' '11'  ''.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            filename              = pathname
            filetype              = ftype
            append                = 'X'
            write_field_separator = 'X'
          TABLES
            data_tab              = it_mainall
          EXCEPTIONS
            file_write_error      = 1.
        IF sy-subrc = 0.
          status = 'S'.
        ELSE.
          status = 'E'.
        ENDIF.
      ENDIF.
      PERFORM build_layout.
      PERFORM build_events.
      PERFORM sub_comment_build USING it_list_top_of_page.
      PERFORM sub_set_variant.
      PERFORM display_alv_report.
      IF status = 'S'.
        MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
      ELSE.
        MESSAGE 'Download Not Possible' TYPE 'I'.
      ENDIF.
    ENDFORM.                    " SUB_DISPLAY_REPORT
    FORM BUILD_FIELDCATALOG
    FORM build_fieldcatalog USING  p_col_pos
                                   p_fieldname
                                   p_text
                                   p_datatype
                                   p_outputlen
                                   p_col_freez.
      wa_fcat-row_pos        = '1'.
      wa_fcat-col_pos        = p_col_pos.
      wa_fcat-fieldname      = p_fieldname.
      wa_fcat-tabname        = c_tabname.
      wa_fcat-reptext_ddic   = p_text.
      wa_fcat-datatype       = p_datatype.
      wa_fcat-ddic_outputlen = p_outputlen.
      wa_fcat-key            = p_col_freez.
      APPEND wa_fcat TO it_fcat.
      CLEAR wa_fcat.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
    FORM build_layout.
      CLEAR: wa_layout.
      wa_layout-window_titlebar   = 'LIST OF GSM WISE OPEN SALE ORDERS'.
      wa_layout-colwidth_optimize = 'X'.
      wa_layout-totals_text       = 'CUMULATIVE'.
    ENDFORM.                    "BUILD_LAYOUT
    *&      Form  BUILD_EVENTS
    FORM build_events.
      CLEAR wa_event.
      REFRESH it_events.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          i_list_type     = 0
        IMPORTING
          et_events       = it_events
        EXCEPTIONS
          list_type_wrong = 1
          OTHERS          = 2.
      IF sy-subrc = 0.
        READ TABLE it_events INTO wa_event
             WITH KEY name = 'TOP_OF_PAGE'.
        IF sy-subrc EQ 0.
          wa_event-form = 'TOP_OF_PAGE'.
          APPEND wa_event TO it_events.
          CLEAR wa_event.
        ENDIF.
      ENDIF.
    ENDFORM.                    "BUILD_EVENTS
         -->P_IT_LIST_TOP_OF_PAGE  text
    FORM sub_comment_build  USING it_top_of_page TYPE slis_t_listheader.
      DATA ls_line TYPE slis_listheader.
      CLEAR ls_line.
      ls_line-typ = 'H'.
      ls_line-info = str1.
      APPEND ls_line TO it_top_of_page.
      CLEAR ls_line.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
         it_list_commentary = t_header[].
    ENDFORM.                    " SUB_COMMENT_BUILD
    *&      Form  SUB_SET_VARIANT
          text
    -->  p1        text
    <--  p2        text
    FORM sub_set_variant .
      CLEAR wa_variant.
      wa_variant-report = sy-repid.
      wa_variant-username = sy-uname.
    wa_variant-variant = c_variant.
    wa_variant-variant = p_layout.
    ENDFORM.                    " SUB_SET_VARIANT
    *&      Form  DISPLAY_ALV_REPORT
    *Display Report Using ALV GRID
    FORM display_alv_report.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_buffer_active          = 'X'
          i_callback_program       = sy-repid
         i_callback_pf_status_set = c_pf_status
         i_callback_user_command  = c_user_command
          is_layout                = wa_layout
          it_fieldcat              = it_fcat
         it_sort                  = it_sort[]
          it_events                = it_events
          i_save                   = 'A'
          is_variant               = wa_variant
        TABLES
          t_outtab                 = it_main
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE text-204 " 'Error in Display the list'
        TYPE 'I'.
        LEAVE TO LIST-PROCESSING.
      ENDIF.
    ENDFORM.            .                    "DISPLAY_ALV_REPORT
    *ALV Report Header
    FORM top_of_page.
      DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
             wa_header TYPE slis_listheader,
             t_line LIKE wa_header-info,
             ld_lines TYPE i,
             ld_linesc(10) TYPE c.
      wa_header-typ  = 'H'.
    T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
      wa_header-info = str1.
      APPEND wa_header TO t_header.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = t_header[].
    ENDFORM.                    "TOP_OF_PAGE
    here it_main internal table having all data. but output is showing few records only.
    pl. give some idea.
    Thanks & Regards
    Srinivas.

  • Report download to power point doesn't show all records

    dear experts,
    I have a report with a tape deck below, so it shows only records 1-25. When I click download to excel, every record is downloaded (1-all rows) and this is fine. But, if I download to power point, only the records shown on the dashboard (e.g. 1-25) are downloaded into power point.
    Our quality assurance claims, that the behaviour for both download options should be the same, and not downloading to excel having every row and the power point showing limited rows.
    Is there a way to download the whole report, each row, to power point (without clicking on tapedeck to show all) ??
    Thanks in advance.
    best regards,
    Thomas

    problem solved
    modify report - results(answers) - click on printer icon (PDF and Print Control) - Print Rows - set to "All"
    regards,
    thomas

  • LMS 3.2 SP1 RME showing no records in syslog report while same report in device center shows

    Hi All,
    I have LMS 3.2  SP1 running on windows machine, when i am generating 24 hours report(Standard) in RME i do not see any records, while in Device center  in Device Diagnostic center, i can see the same report showing the logs.  i have checked the sylog.log file, i can see the logs in it. I have restored the original database by Restoredborig.pl, the RME database also but no result.
    I would appreciate quick reply in this matter as i am facing this issue since long time and tried all possible things.
    Regards,
    Chander

    Hi Chander,
    Share  the screen shot to Syslog Collector status.
    Thanks-
    Afroz

  • Customer Exit - Fill variable value - Report is showing wrong records

    Hi Gurus,
    I'm building a query where the user will type a date.
    So I need to show in report just the records where Valid From <= User input date <= Valid To.
    I've created to variables for this:
    ZMSCOG07 (Single, Mandatory) = user input variable used in Valid From characteristic restriction.
    ZMPCOG10 (Single, Mandatory) = customer exit variable to get ZMSCOG07 value and to be used as restriction to Valid To characteristic.
    Then in the query I restricted Valid From characteristic:
    Valid From <= ZMSCOG07
    and Valid To characteristic:
    Valid To >= ZMPCOG10
    Follow my code in CMOD transaction:
    WHEN 'ZMPCOG10'.
        IF I_STEP = 2.
            READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
            with key VNAM = 'ZMSCOG07'.
            CLEAR L_S_RANGE.
            if sy-subrc = 0.
                L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
            endif.
            L_S_RANGE-SIGN     = 'I'.
            L_S_RANGE-OPT      = 'EQ'.
            APPEND L_S_RANGE TO E_T_RANGE.
        ENDIF.
    I already tried to put L_S_RANGE-OPT = 'GE' in the variable range and in the query to restrict Valid To characteristic:
    Valid From = ZMPCOG10.
    But it's not working correctly. The report is just considering Valid From restriction and showing to me all the records where Valid From <= ZMSCOG07. It seems that ZMPCOG10 is not being filled. Could somebody help me?
    Thanks in advance,
    Helder

    Hi Helder,
    I understand your requirement but I don't understand the solution you are using. I think it's a bit tricky.
    What I would do is:
    Create three variables:
    - VAR1: Single value, mandatory, ready for input, customer exit. Used to store "User input date"
    - VAR2: Select option, customer exit, not ready for input. Used to store Valid From restriction.
    - VAR3: Select option, customer exit, not ready for input. Used to store Valid to restriction.
    Then, use this code:
    WHEN 'VAR2'.
    IF I_STEP = 2.
    READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
    with key VNAM = 'VAR1'.
    CLEAR L_S_RANGE.
    L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'LE'.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    WHEN 'VAR3'.
    IF I_STEP = 2.
    READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
    with key VNAM = 'VAR1'.
    CLEAR L_S_RANGE.
    L_S_RANGE-LOW = LOC_VAR_RANGE-LOW.
    L_S_RANGE-SIGN = 'I'.
    L_S_RANGE-OPT = 'GE'.
    APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
    I think this should work, and you'll have three independent variables used for one purpose each.
    Hope this helps.
    Regards,
    Diego

  • Report not showing all records

    Hi ,
    I have made a report but when i execute the report only the first page comes with 18 records but when I execute the same query from SQL*Plus then it shows 30 records.
    Please suggest me how to solve ?
    Bye
    Ashu

    Hi,
    what do you use to view the output? The Live Previewer in the Reports Builder? One idea ist that you have not seen the button for going to the next page; other reasons can be format triggers which supresses records or frame properties which doesn't allow more records (not expandable) or a group filter in the data modell ...
    Regards
    Rainer

  • My credit card  has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

    My credit card  has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

    Would be problems with purchases, billing, and redemption option.  It's not 100% exact to your issue, but it will get you to the right department.
    Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption.  Then.. probably pick "My topic is not listed." 

  • Filter on a Report to display  records only  from last 12 months

    Hi Folks,
    I have a requirement where I have to display Records for last 12 months. Following is the Filter that I am using
    Opportunity."Close Date" >= TIMESTAMPADD(SQL_TSI_MONTH, 0, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE)-1), CURRENT_DATE)) AND Opportunity."Close Date" <= TIMESTAMPADD(SQL_TSI_MONTH, 12, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE)), CURRENT_DATE))
    But this is showing me records for next 12 months.
    How can I solve this Issue??
    Thanks and Regards,
    Amit Koul

    Dinesh,
    The filter that you suggested works for last 365days, if you try to create a simple report with just Date field in it, you will come to know the difference.
    Using the filter suggested by you it will show me records from 27th Jan 2008 since today the date is 27th Jan 2009.
    I want it to filter records for last 12 months including Jan 2009.(so the interval comes to be Feb 2008 to Jan 2009)
    Hope I made sense!!
    Thanks and Regards,
    Amit koul
    Edited by: Amit Koul on Jan 27, 2009 7:27 PM

  • Showing Blank Records oracle forms 11g

    Deal all..
    i am using oracle forms 11g ,  i created a form by using data block wizard & layout wizard  , but when i run the form, the form running successfully  in  browser,  url is (  http://arun-pc:9001/forms/frmservlet), but  it is showing empty records.
    when i check with sql  plus user Scott ,  i found 10 records in departments table ,  same user and same table  i used in oracle forms.
    i don't know what is the  problem.. i am new to oracle forms please help me..
    i am waiting 4r your valuable reply
    thank s in Advance..

    Hello. Mr.harsh shah...
    Thank u for your reply..
    I follow the link what u given in above post..  But still i have the same issue..  i am not sure, but   i think i have problem with my Environment, bcz in many blogs i read that oracle forms is not recommended to use with 64 bit OS. and second , iam not using developer suite 10g,
    currently i am using,
    operating system:  windows server 2008 r2
    weblogic server :-  wls1036 (64bit)
    JDK :- 7u17 64bit
    Oracle forms :-  11g
    and database in another host , just i edit tnsnames.ora file in forms directory.  the following are my configuration options
    Oracle Forms and Reports Installation
    Configuration Options
      Middleware Home Location: C:\Oracle\Middleware
      Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
      Oracle Instance Location: C:\Oracle\Middleware\asinst_1
      Oracle Instance: asinst_1
      Domain Option: Create Domain
      Domain Name: ClassicDomain
      Domain Home: C:\Oracle\Middleware\user_projects\domains\ClassicDomain
      Domain Host Name: WIN-DMJUC51KRHF
      Domain Port No: 7001
      User Name: weblogic
      Automatic Port Detection: true
      Administrator Console: http://WIN-DMJUC51KRHF:7001/console
      EM Console: http://WIN-DMJUC51KRHF:7001/em
      EMAgent URL: http://WIN-DMJUC51KRHF:5155/emd/main
      Forms URL: http://WIN-DMJUC51KRHF:8888/forms/frmservlet
      Reports URL: http://WIN-DMJUC51KRHF:8888/reports/rwservlet
    i check all the links above, all services showing running successfully..  but when i run the form , i dont fine any records , showing empty and blank records..
    please give me clarification ...
    Thank u very much..
    Arun

  • KKO0 Report - Problem with splitting Output Variances

    Hi,
    I have built a KKO0 report to allow split of Production Variances to cost components (Material, Labor, Overhead). I have done the required configuration to assign the proper cost component structure in OKN0 transaction.
    In KKO0 the split of variances to cost components works for Input side variances and Output Lot Size Variance. However, it does not allocate variances to cost components for Output Price Variances and Remaining Output Variances. I had to create a separate row in the report to show Not Assigned line - where these 2 output variance categories appear as a total.
    Has anybody had a similar problem and found a better solution?
    Kind regards,
    Karol

    String tokenier splits on any of the symbols provided. Not a the approiate comibination.
    Try using split
            String s="hai@#$hello@@$hey@#$hi";
            String[] sArr = s.split("@#\\$");
            for(int j=0;j<sArr.length;j++)
                System.out.println(sArr[j]);

  • Problem in Reporting having 2 records in Cube of same attribute

    Hi All,
    Here are a few thoughts about the problem
            1. We are doing a full load to the DSO
            2. Then are loading a delta to the cube
                    If, an employee's attribute changes today, (e.g. for OrgUnit A to OrgUnit B), then that employee might have two records in the cube (and only 1record in the DSO)
                    I can think of other possibities too-- for some employee the cube will have the latest attribute, for other employee, the cube will have old attributes.
    Please suggest me how i can get read of this situation.
    Thanks
    Ankur Kuchhal
    Mobile:- 9704154150
    Edited by: Ankur Kuchhal on Sep 9, 2008 11:16 AM

    hi,
    while transfering the data to Cube the Keyfigure will be taken care by the change log table in DSO. But my botheration is about the attribute of the record.
    Old record will have like this
    ORG-A         EMP1       +10
    ORG-B         EMP1       +20
    Now the keyfigure value is 30. But my problem is while reporting it will show 2 records ORG-A and ORG-B for the same employee. Though my requirement is, it should show only one record like
    ORG-B     EMP1     +30
    in reporting.
    Thanks
    Anlur Kuchhal
    Mobile:- 9704154150

  • Partition shows no records in Data Dictionary

    Wondering if anyone has seen this and can explain? The data dictionary shows no records in the second and thrid of the following partitions, but there are 1.5M records in the second one. Are the summaries Oracle keeps correct?
    PARTITION_NAME NUM_ROWS AVG_ROW_LEN
    IU_DS_20000407 9994667 126
    IU_DS_20000408 0 0
    IU_DS_20000409 0 0
    1 select time, count(time) from iu_ds partition (iu_ds_20000408)
    2* group by time
    SQL> /
    TIME COUNT(TIME)
    04-08-2000 00:00:00 1519155
    1 select time, count(time) from iu_ds partition (iu_ds_20000409)
    2 group by time;
    no rows selected
    null

    ISE 1.2 Dashboard Statics do not update
    CSCul94611
    Description
    Symptom:
    Issue with the Live dashboard in ISE 1.1.4 not displaying information and only showing "No Data Available".
    The Dash Board will run and work for awhile, but it will randomly stop updating any statistics on the dashboard.
    Data will show and is seen in the database, but never updates per incoming/outgoing endpoints.
    Live authentications will work fine as well as all users are able to be authenticated. Customer reports do not produce data.
    Seen on multiple customer's deployments with fresh installs, a fresh install with a backup from a previous 1.1.x version, as well as upgrading to 1.1.4 from any earlier 1.1.x version.
    Conditions:
    Cisco ISE 1.2 or 1.1.4
    Any browser
    Distributed or single node deployment.
    Workaround:
    The workaround that fixes this M&T corruption is to enter the following commands below:
    ms-ise-mgm01/admin# app config ise
    Selection ISE configuration option
    [1]Reset Active Directory settings to defaults
    [2]Display Active Directory settings
    [3]Configure Active Directory settings
    [4]Restart/Apply Active Directory settings
    [5]Clear Active Directory Trusts Cache and restart/apply Active Directory settings
    [6]Enable/Disable ERS API
    [7]Reset M&T Session Database
    [8]Rebuild M&T Unusable Indexes
    [9]Purge M&T Operational Data
    [10]Reset M&T Database
    [11]Refresh M&T Database Statistics
    [12]Display Profiler Statistics
    [13]Exit
    We need to select the following options:
    7 to reset the session db
    10 to reset the M&T database
    11 to refresh the statistics (Possibly do not need. Was only needed in 1 case.)
    Once you have run these commands the DashBoard should begin to display information.
    This process can take up to 12 hours to complete all three steps. Roughly 1 to 3 hours per option selected.
    Known Affected Releases:
    (1)
    1.2(0.899)

Maybe you are looking for