KKRV-Data collection for product drilldown

Dear all,
In KKRV data is not collected.
I have maintained product group=material group in OKN0
Cost component structure OP
Please suggest whether any other activities to be done for data to be collected.
In transaction KKBC_HOE. I am getting a msg Enter Hierarchy ID. How to visualize this report. pls suggest.
Regards
Subbu.
Edited by: Subbu SP on May 5, 2011 3:47 AM

Hi Subbu
You are on a wrong path
The settings you did in OKN0 + KKRV - Relate to KKO0 reports (Not KKBC_HOE)
For KKBC_HOE - You need to configure summarization Hier in KKR0
br, Ajay M

Similar Messages

KKRV- Urgent please ,Data collection for product drill down

Hi
I was trying to run the report for variances but no data is pulling, says no summarization, i checked the KKR0 for summariazation, what settings do we need to do activate or work the reports?
Thanks,
Nivi
Message was edited by:
Nivi ram

Hi Subbu
You are on a wrong path
The settings you did in OKN0 + KKRV - Relate to KKO0 reports (Not KKBC_HOE)
For KKBC_HOE - You need to configure summarization Hier in KKR0
br, Ajay M

Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redunda

I understand the charter on this is to "check-in" once every time the program is turned on, and then once every 6 hours after that, or, once every 24 hours presumably. But the phone-home-effect is over-stepping these basic parameters. If a user turns their browser off and then on, Firefox is still obligated to "check-in" even if it just checked in 3 minutes prior. If the coding is not pre-designed to overstep, or act excessively in a redundant focus, the instance of once every six hours or once every 24 hours, is still overmuch if a user has been doing this (non-voluntarily-participating) for 9 months or longer.
== This happened ==
Every time Firefox opened
== This started when Firefox took up the initiative of "improving service. to end users" or similar idea, making the web safer for novice users, etcetera.

Opening question was truncated. Should read: "Firefox users cannot presently exercise choice, to opt-in or out of "data collected for improving services." As a result, Firefox is constantly dialing home, sometimes four times a day or more up to 48 times a day. There is some over-stepping and redundancy here. It would seem the practice of "improving service" has been accomplished with as much information as Mozilla has gathered in the last 6-18 months about its users habits. '''Isnt it about time to give users the option to opt out of that now that most the heavy liftiing has been accomplished?'''"

Problem setting up data collection for a performance problem

We have a performance problem on our production environment: there is a query that is long to display specially on specific records involving a lot of détails. I had the idea to set up data collection to investigate the problem.
I used the wizard to set up data collection with default settings.
I had created a database PERF_DW on our test server for that purpose.
I didn't have any problem with the wizard: it created data collection sets and SQL Server agents tasks and probably many objects. But I don't know where I missed something but I didnt, have the chance to specify the database I wanted to tune
and even when I started data collection, I couldn't figure out where were the reports.
Then I tought that I did it all wrong so I stopped data collection and dropped the database and tried to deleted the jobs created and I had the following message:
TITRE : Microsoft SQL Server Management Studio
Échec de Supprimer pour Travail « collection_set_1_noncached_collect_and_upload ». (Microsoft.SqlServer.Smo)
Pour obtenir de l'aide, cliquez sur :
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.2100.60+((SQL11_RTM).120210-1917+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Supprimer+Job&LinkId=20476
INFORMATIONS SUPPLÉMENTAIRES :
Une exception s'est produite lors de l'exécution d'une instruction ou d'un lot Transact-SQL. (Microsoft.SqlServer.ConnectionInfo)
The DELETE statement conflicted with the REFERENCE constraint "FK_syscollector_collection_sets_collection_sysjobs". The conflict occurred in database "msdb", table "dbo.syscollector_collection_sets_internal", column 'collection_job_id'.
The statement has been terminated. (Microsoft SQL Server, Erreur : 547)
Pour obtenir de l'aide, cliquez sur :
http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3128&EvtSrc=MSSQLServer&EvtID=547&LinkId=20476
BOUTONS :
OK
Now I understand that the collectors prevent the jobs from being deleted but I can't delete the collectors.
What should I do?
Any help is appreciated.
Thank you for your advice.
Sylvie P

Hello,
Please refer to the following article.
http://blogs.msdn.com/b/sqlagent/archive/2011/07/22/remove-associated-data-collector-jobs.aspx
You can run the dcclenaup.sql script mentioned in the article.
Another option is using sp_syscollector_cleanup_collector.
http://blogs.msdn.com/b/sqlagent/archive/2012/04/05/remove-associated-data-collector-jobs-in-sql-2012.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Problem setting data collection for SLD

Good day
I have the following situation.
A Solution Manager 71 installation, just recently patched to SP11. Previously I had the SLD on this system. And then a colleague informed that this could be a problem in the future as my ECC systems are Basis 731 which is higher level than the 702 on the Solution Manager system. So I installed a separate Java stack system on the same server as the Solution Manager.
The problem that I am faced with now is that I cant get the data collection (RZ70) to connect with the new Java system that I have installed. When I go into SLD and Administration, I see under Details>Data Suppliers that the server is specified as the Gateway Host, with a Gateway port of 3303. On the Solution Manager system it specified the gateway host as "localhost" and the gateway port as sapgw00.
So, from RZ70 I specify the gateway service as sapgw03 and then I get the result:
0: DSIMSID001_SID_00
: Collection of SLD data finished
0: DSIMSID001_SID_00
: Data collected successfully
0: DSIMSID001_SID_00
: RFC data prepared
0: DSIMSID001_SID_00
: Used RFC destination: SLD_NUC
0: DSIMSID001_SID_00
: RFC call failed: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
0: DSIMSID001_SID_00
: Batch job not scheduled
And from the SLD_NUC entry in SM59 I get
Logon    Connection Error
Error Details    Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=2
Error Details    ERROR: SAP gateway communication error (Is SAP gateway closed?)
Error Details    LOCATION: SAP-Server DSIMSID001_SID_00 on host DSIMSID001 (wp 1)
Error Details    COMPONENT: CPIC
Error Details    COUNTER: 47
Error Details    MODULE:
Error Details    LINE:
Error Details    RETURN CODE: 239
Error Details    SUBRC: 0
Error Details    RELEASE: 721
Error Details    TIME: Mon Mar 16 14:04:05 2015
Error Details    VERSION:
Can anyone give me a few ideas what may be wrong here please?
Regards
Ray Phillips

Hi Ray,
Please check if the below SLD configuration is done.You can use any one of the two below link depending on how you want to configure your SLD.
Configure SLD for JCo and Creation of JCo Destinations - Portal - SCN Wiki
or
How to Create & Configure Local SLD on SAP NetWeaver 7.3 AS Java after Installation
If your SLD server is not a local SLD then make sure that in both the SLD system and the remote system host fine entry is there in /etc/hosts and etc/services.

How to do filter data after Data Collection for Oracle PS

Hi Experts,
I have a critical issue on the "Data Volume" after data collection program.
If I give this big chunk of data as a input to PS, then integration program is not taking this High volume of data into PS.
Hence now I have a critical task to reduce number of Data.
In this front, first I need to delete some items which are not required for PS in the base table(In MSC_SYSTEM_ITEMS) after collection program, but I do not know the dependent entities which also has to be taken care in MSC side after collection, If I delete the itrems from MSC_SYSTEM_ITEMS..
Hence I require help on this data filter issue.
Appreciating anyone's help in advance...
Thanks & Regards,
Bharathram N

Hello,
Have you looked at the request Purge ODS Data of Collections? Using this you can delete all the collected data for a specific instance id.
Once that is done you can run a complete refresh for all entities for all enabled organizations. This will ensure that old data pertaining to disabled orgs is removed.
Additionally in 11.5.10 (collections rup 32 and later) there is a feature implemented which does not pull data from disabled organizations into the source snapshots. This in itself does not make a difference for the ODS data, but does give better performance in the refresh snapshots.
One thing to take into account if your purge the ODS data that in the event when you still have ascp plans that are based on this data, then you may end up with no data being displayed in the workbench (because the lid tables have been purged). Here you would have to rerun the plans.
best regards
Geert

Assistance with Data Merge for product sell sheets

Last year I started creating product sell sheets for our sales team. The sell sheet is built containg these elements: A product photo, a data table displaying product numbers, descriptions etc.. Underneath the photo and table is a text box. I have created a lot of these sell sheets for a variety of product categories. The prices are updated fairly often, maybe once every month or two. I created all of these using excel and Illustrator. Other than photoshop, Adobe products were forign to me and never looked into what indesign was capable of until now.
I am wondering if the data merge feature would be a good fit for what I am doing. I would be more than happy to share my project files. I am asking for a little bit of hand holding here to expedite this process. Anyone out there willing to take a look and help me out??
Project Files:
PDF Sell Sheet created in Illustrator (would like to have the same look and feel but have the data automated in Indesign)
Excel Data (Looking to reformat the way the data is displayed so that it would work well with Data Merge)

I don' think data merge will lend itself well to that sort of layout. It's just not sophisticated enough. For datamerge, all the data for each module has to be in one row on your excel sheet. Example: The setup on top will yield the example below. The image has a placeholder in the far left.
For your example, I think your best bet is to set up table styles. (table styles won't hold column widths, but there is a script that you can use for that: it's referenced in this thread. If you make good use of paragraph styles and table styles, it will still go much more quickly in InDesign.
http://forums.adobe.com/message/4929669

Data collection for cost object hierarchy - no data at order level!

Hi everyone,
When using transaction KKP6 to see my hierarchy for cost object, the system displays all the values that are allocated on my hierarchy nodes, but I do not have the values that should come from the production orders (repetitive manufacturing with production version).
I use transaction KKRZ to collect data for cost object hierarchy, but it seems that the system does not retrieve any information from the orders.
Would someone know about this point customizing steps to follow to retrieve my orders values?
Thanks in advance for your answer. Rewards guaranteed!
Ronan

Hi Amadeus,
To do so, I have used transaction OKZ5 in the customizing and ticked "always cost object hierarchy" and "distribution".
By doing so, you enable the system to distribute costs within a cost hierarchy. Otherwise the system will only determine costs on the hierarchy.
Try this, it may work for you as well. During your period-end closing, you sould now use "cost object hierarchy" instead of product cost collector.
Regards,
Ronan

MD04 MRP Data Element for Production Order add Order Status

Hi,
Currently in MD04 when you create a production order it gives the status in MRP Element Data as 000001138145/YP01/ and once I release this is shows the following status 000001138145/YP01/Re
I want to bring another status in how can you do this?
Thanks
Adeel Sarwar

Dear,
It is not possible in standard SAP to display the Lock production order as status 'Locked' are taking into consideration with regard to availability relevance in the MRP. MD04 display only those MRP element which are relevent for MRP calculation.
So better check this order in COOIS with LCK (Locked Status).
Hope clear to you.
Regards,
R.Brahmankar

Oracle enterprise data quality for product(PDQ)

Hi,
i am looking for tutorial or training material for oracle pdq(product data quality).
can anybody please suggest where can i find good material or hands on tutorials?
Thank you
Raghu.Vujjini

You should find all you need in the Getting Started guide in the online help.
I recommend using the introductory wizard when first launching Director- this will take you through creating a project, connecting to some data, and creating a profiling process.

Table in which system updates data collected through KKRV

Hi,
Can any one tell me the table in which system updates data collected through KKRV?
and the correct procedure to collect the data for product drilldown.
can i run KKRC alogwith KKRV to get summerized reports?
Thanks in advance
Regards,

You could probably trace them at COSP or COSS tables where the object starts with VD (summarization object).
Summarization transaction are better if run separately. First KKRV for summarising plant level information and then KKRC for hierarchy summarization.

Calculations for data collection

Hi,
In 'formula' type parameter for data collection, for the first time when operator enters values, the formula parameter does the calculation and give results.
However, if later on the same data is edited, then the calculations donot take place and operator himself has to calculate and update the field.
foreg: P1 and P2 are 2 parameters under 1 DC group.
P3=P1+P2.
When operator enters for the first time values for P1 and P2, P3 gets calculated. However, If later on values for P1 and P2 are edited through 'data collection edit' activity, P3 calculations donot change and operator has to calculate it and re-enter in P3 field.
This is my understanding, please correct me if these calculations automatically takeplace whenever the base values are edited .
Thanks.
Regards
Mansi

nimaq,
One of my more astute coworkers (a know it all, so he thinks, hehe), reminded me that we do sell a PCMCIA/Cardbus PXI Chassis controller and a ExpressCard PXI controller (if you have a computer with an ExpressCard slot).
Cardbus controller link...
NI PXI-CardBus8310
ExpressCard controller link...
NI PXI-ExpressCard8360
If you buy a PXI controller for your Laptop, a PXI Chassis, and a PXI digital frame grabber, then you will have a system that allows you to grab images from your digital camera via your Laptop. If you have not yet purchased a Laptop, I highly recommend you purchase a Laptop with an ExpressCard slot (they have much higher bandwidth) which you will want for frame grabbing.
Below is a Link to a 4 slot PXI Chassis...
NI PXI-1031
Below is a Link to a Digital PXI Frame grabber...
NI PXI-1422
Buying these 3 products (PXI-ExpressCard8360, PXI-1031, and the PXI-1422) and the proper laptop, will give you a top of the line digital camera acquisition system.
Lorne Hengst
Application Engineer
National Instruments

WJA - Failed Alerts - Data Collection Inaccuracies

I have been running Web Jetadmin v10.2.7491B on a 2003 server for about 3 years. There are 120 managed printers consisting of 9 different models.
Issue #1
Initially I had alerts configured on all printers that would send an email when a consumable dropped below 3%. This worked very relibly for the first year. Over time, an increasing number of printers stopped sending reports, until eventually only a handful sent alerts. I never found the cause of this problem.
Issue #2
Since alerts were broken, I setup a daily data collection for all printers and a morning csv report sent via email. I would then sort the data by remaining consumable percentage and replace those at 1% or below. Recently, 3 models out of 9 have stopped reporting accurate consumable percentages in the daily reports. This problem seems to correspond with a firmware update I pushed out to all printers. The WJA console DOES show accurate information for individual printers when they are selected.
Steps taken to resolve #2
Printers have been removed from the all Report Data Collection groups, and then added back. This did not resolve the issue. Printers were initially added individually to a Data Collection, but I have implemented a Group Policy that automatically adds a printer to the Data Collection. 6 printer models still show accurate percentages, but models 4345, 4730, and 5035 do not.
Is there a database file I can delete that will force a Data Collection rebuild for all printers? Is it possible the new firmware for the 3 listed models has a bug that prevents the data from being updated?
This question was solved.
View Solution.

This forum is focused on consumer level products. For this issue you may have better results posting in the Enterprise Print Servers, Network Storage and Web Jetadmin forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Product drilldown reports - Not linked when selecting call up functionality

hi all,
i running the tgt/act/var cumulative report (s_alr_87013139) and values are showing as expected, but when i try to view the order involved in the material, by selecting the material number and click on the "call up report" functionality, system will be showing the "no records selected" message. Any idea why this is happening? Thanks
Regards
Mg

Hi,
You should check that there are only two summarisation levels for each Cotrolling area (for reports with material number and without) - please see the note 422543. For some (unknown) reasons sometimes there are more than two levels per controlling area in the system. The drill down report then tries to read from the wrong level and can't find any data.
If you have more than two in one controlling area you should delete them (within TA KKDV). If the results in the drill down report are not correct afterwards, you should delete all levels and run TA KKRV (data collection) again afterwards.
Regards,
Declan

Too many BPM data collection jobs on backend system

Hi all,
We find about 40,000 data collection jobs running on our ECC6 system, far too many.
We run about 12 solutions, all linked to the same backend ECC6 system. Most probably this is part of the problem. We plan to scale down to 1 solution rather than the country-based approach.
But here we are now, and I have these questions.
1. How can I relate a BPM_DATA_COLLECTION job on ECC6 back to a particular solution ? The job log give me monitor-id, but I can't relate that back to a solution.
2. If I deactivate a solution in the solution overview, does that immediately cancel the data collection for that solution ?
3. In the monitoring schedule on a business process step we sometimes have intervals defined as 5 minutes, sometimes 60. Strange thing is that the drop-down of that field does not always give us the same list of values. Even within a solution I see that in one step I have the choice of a long list of intervals, in the next step in that same business process I can only choose between blank and 5 minutes.
How is this defined ?
Thanks in advance,
Rad.

Hi,
How did you managed to get rid of this issue. i am facing the same.
Thanks,
Manan

KKRV-Data collection for product drilldown

Similar Messages

Maybe you are looking for