KM list iview selection criteria

Hi, we need to do some kinds of ivews, the iviews have to list km content but with different criteria:
1.-> We want to show only one item of some of them of a km folder. The one that we want to show have one property check true (flag).
2.-> We want to list the last three items of a km folder.
3.-> We have diferent folders f1 f2 f3 with km content. We want to publish three items of those folders and the criteria should be random by the system.
4.-> We want to list the last three items of a km folder but near at the left we want to show a calendar with today mark.
I suppose that the way is use km navigation iview with layout set and taxonomies, but I would be very grateful if somebody give me orientation.
Thanks in advanced.
REGARDS.

Without programming, this would be my initial approach:
Number 1 - first idea would be to use a query-based taxonomy
Number 2 - should not be too hard. You would create a new layout set
based on the consumer explorer, and then set the sort property and order,
the rows to 3, and turn off the pager.
Number 3 - tough, but maybe you can formulate a query that gives you a
good variety. This may force you to pursue a programatic approach.
Number 4 - You could possibly use an HTML collection renderer or 2
separate iViews.
Regards,
Darin

Similar Messages

  • SNC- New field adding to the Purchase due list for selection criteria

    Hi SNC Experts,
    I have to Add new fields from the existing available fields from the configuration in the purchasing  due list and for PO over view selection criteria. I want to know the configuration spot where should I go and look for thew list of exisitng fields which are not displayed for the selection criteria.

    HI Lata,
    which version is the system running on? We have BSP UI in lower releases and WD UI in latest releases.
    Best Regards,
    Harsha Gatt

  • Limited drop down list in selection criteria in Crystal Report

    I have designed a Crystal Report to produce Item Labels using Crystal Reports for SAP Business One.
    The design has a Dynamic parameter for the selection of Item Code, linked to the OITM table in the database
    The customer database has 5000+ items.
    When I run the report, either in the designer or in the viewer, I get 5 pages of item codes to select from, but they stop at 1000 items.
    Is this a bug with Crystal, or is there some configuration I can change to correct this issue?

    Closed

  • Add selection criteria to Billing due date list VF04

    Dear gurus,
    I need to execute report VF04  but looking sales documents by material. is there any enhacement point or user-exit to add this option to program?
    Thank in advance.
    Best regards
    Juan

    Hi,
    Take a copy of the program SDBILLDL.
    Add the field as a parameter ocr select option.
    (1). In ex line 565 add following:
    LOOP AT p_gt_fvkdfi.
    CLEAR vbak.
    LOOP AT s_ernam.
    DELETE s_ernam.
    ENDLOOP.
    ENDIF.
    SELECT SINGLE ernam
    INTO ( VBAK-ERNAM)
    FROM vbak WHERE vbeln = p_gt_fvkdfi-vbeln
    AND ernam IN s_pernam.
    IF sy-subrc NE 0.
    DELETE p_gt_fvkdfi.
    CONTINUE.
    ENDIF.
    ENDLOOP.
    Create your own transaction code to this report instead of VF04.
    (2).
    What you can do is use user exits, USEREXIT_VKDFS_SORTKRI_SALES and USEREXIT_VKDFS_SORTKRI_DEL in V05IEXIT for sales and delivery related billing respectively. All you need to do is to load the user name into VKDFS-SORTKRI and that should be it.
    (3).
    http://saptechsolutions.com/pdf/SDBillingDocumentConsolidationAndSplit.pdf
    (4).please chec for OSS notes.
    (5).SPRO IMG -> Sales and Distribution -> Billing -> Lists -> Define Selection Criteria
    regards
    balajia.

  • Delivery List : Selection criteria in VA05

    Hii
    Can any body please solve this out?
    1. In VA05, I want to set the date of present month. Like if I open that in august then the date range will show by default 01.08.09 initial and ending 31.08.09 and if I open that in september then it will be 01.09.09 and 30.09.09
    Note - Display Variant is not working. Tell me some other tricks
    2.  In Further Select  Criteria  there is no criteria for plant. Is it possible to set Plant option over there?
    Please solve the issue.
    Thanks and Regards
    Santanu

    Hi
    Plant can be added to the list of further selection criteria through configuration. Please follow the below process...
    Goto IMG - Sales & Distribution - Sales - Lists - Define Selection Criteria - execute
    In the screen - goto New Entries and add the following details..
    1. Program Name - SAPMV75A
    2. TRG (Transaction Group) - 0
    3. Display Group - K
    4. Event - SELK
    5. It - 8
    6. Field Name - WERKS
    Enter the details and save the changes. Goto VA05 and you can see the field PLANT in the Fur Sel Criteria.
    Thanks,
    Ravi

  • To create selection criteria for PO list

    Dear MM Experts,
    How we can get report on PO list on the basis of release strategy as selection criteria?
    Path : IMG - MM - Purchasing - Reporting - Maintain purchase list - Selection parameters - Define selection parameters.
    Please help me out.
    Thanks & Regards,
    Sandeep.

    Hi,
    You can use ME2N -> Dynamic selections  -> Purchasing Document Header  -> here you will find fields like
    1.Release group
    2.Release Strategy
    3.Release indicator
    4.Release status
    Here input your required selection  data and Save as variant for later use
    Same dynamic selection also available in report *ME80FN , ME2C etc

  • Create choose from list in Report selection criteria

    Hi all,
    Is it possible to create a choose from list in UDF in a Report selection criteria ?
    My issue is i just want to create a report using crystal report. In this report contain some parameter which the parameter choose from list value is come from a UDT. If the value come from OCRD or OITM , it's so easy to make. I just make Customer @From OCRD in parameter CR, then i just preview, it will make choose from list from business partner. But how about from UDT.
    I have try to make it using Formatted search. So in SAP B1, i binded with formatted search in some parameter that i make it in CR. But there is some thing odd. if I make 2 different report with  different parameter. The formatted search with binded in the first report, will also binded in the second report. And i don't want this happen.
    How can i make it , the formatted search didn't  binded in second report parameter, because the second report is totally different. ?
    thanks in advance
    regards
    Jia shun

    Hi Jia
    Try this
    @UDT
         Code          Alpha(8)
         Name          Alphe(30)
         Fields      etc
    Define the parameter token as follows.
    Season@SELECT DISTINCT T1.Code, T1.Name FROM OADM T0 CROSS JOIN "@UDT" T1
    OADM only has one record so the join will return the right number of records.
    Hope this helps
    Rob

  • No valid task list for material ""  plant "" for selection criteria

    I am getting the following error while creating a production order:
    No valid task list for material ""  plant "" for selection criteria
    Does anyone know how to fix this?
    thanks,
    Scott

    Dear,
    1. Check in Order type dependent parameter - OPL8, select your Plant & Order type. In this check the task list, it should be N. then selection priority in OPJF settings
    2. Chek the routing valid from date for this material by CA02. The production order start date must be between valid date.
    3)Kindly check the routing header.Whether it is for usage 1 and Release status '4'
    4) Task list we maintain in OP8B please check and come back.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 19, 2008 9:57 AM

  • MSS Reporting Workset : Selection Criteria iview

    Hi All,
    We have a requirement to not allow the Selection Criteria iview of MSS Reporting workset to  get displayed, when the user selects a specific report from Reports iview.
    Any pointers regarding the issue would be of great help.
    Thanks in advance,
    Anupama

    It is not possible to avoid the display of Selection Criteria view at the  call of a report that is part of MSS Reporting Workset.
    The report was called in different workset
    Edited by: AnupamaD on Nov 22, 2010 11:19 AM

  • Portal Activity Report with Selection criteria

    Hi All,
    I have created an iview using 'Portal Activity Report' template, added the iview to page and page is added to the role which is created for this report. Also, users were assigned to the new role. When users go to portal and see this report, they are seeing the final output of this report along with the 'Download Report' option.
    My requirement is to give selection screen option (Type of report and Reporting period) to users. So that users will change the selection criteria and run the report as per their need. Please advice me on how to do this.
    Thanks in advance.
    Swapna.

    swapna,
    you can do this by creating a webdynpro application for accessing the database tables, the list of data base tables is in this [help |http://help.sap.com/saphelp_nw04/helpdata/en/48/6aa9429b930b31e10000000a1550b0/frameset.htm]document and use web dynpro application to connect to that tables. Check this thread  for[ dynpro and database tables  |dynpro and database tables;
    regards
    Mahesh

  • MSS  -  reporting  -  selection criteria  - translation

    Hi
    The selection criteria iView
    ( com.sap.pct.hcm.rpt_objectselection )
    has two drop down lists fields:
    1) reporting period
    2) limitation (all employees, directly subordinate
       employees etc)
    I need to translate them to french.
    If I inlcude the iView in my translation list I see
    the reporting period object as:
    Selection period values
    (0=today, 1=current year, 2=current month,
    3=all, 4=past, 5=future, 6=key date, 7=other period)
    which I can translate without problem.
    but i do not see the object for the limitation.
    Any help appreciated.
    Thanx
    Paul

    Paul,
    I think you need to do them in R/3.  Lok at table V_TWPC_V & V_TWPC_VC (customer view of V_TWPC_V) this is where codes for All Employees etc and the texts are held.
    thanks,
    Paul

  • Selection Criteria addition-Not working

    Hi!
    I have this report wherein I need to add two fields VBAP-Kunnr and knvv-konda in the selection screen so that I can do my drill down or search criteria based upon these two selections also apart from the existing ones, but unfortunately I am unable to get throiugh this and somehow putting this two selections in the selection criteria its not taking any effect or its just actinga  dummy selection and I am unale to drill down my report based upon those. Can anyone have a look and let me know what could be the problem please. Help would be highly appreciated.
    Thanks
    *& Include ZSD_PFGENERATETOP Report ZSD_PFGENERATE
    REPORT zsd_pfgenerate LINE-SIZE 170 LINE-COUNT 65.
    TABLES: lips, likp, vbap, vbak, vbrp, vbpa, vbrk.
    CONSTANTS: cns_vgtyp TYPE vbrp-vgtyp VALUE 'J',
    cns_intyp TYPE vbrk-vbtyp VALUE 'M',
    cns_vkorg TYPE vbak-vkorg VALUE 'CA01',
    cns_vkorg_US type vbak-vkorg value 'US01', "DEVK903521
    cns_parsh TYPE vbpa-parvw VALUE 'WE',
    cns_parsp TYPE vbpa-parvw VALUE 'AG',
    cns_parre type vbpa-parvw value 'RE', "bill-to
    cns_auzwp TYPE vbak-auart VALUE 'ZWP',
    cns_auzct TYPE vbak-auart VALUE 'ZCT',
    cns_auzif TYPE vbak-auart VALUE 'ZIF',
    cns_auztm TYPE vbak-auart VALUE 'ZTM',
    cns_fkff TYPE vbrk-fkart VALUE 'ZFF5',
    cns_fkos TYPE vbrk-fkart VALUE 'ZOF5',
    cns_upd(1) TYPE c VALUE 'S',
    cns_mode(1) TYPE c VALUE 'N'.
    Internal Tables and Work Areas
    DATA: BEGIN OF it_vbpos OCCURS 0,
    werks TYPE vbap-werks,
    audat TYPE vbak-audat,
    auart TYPE vbak-auart,
    kunag TYPE vbak-kunnr,
    name1_ag TYPE kna1-name1,
    kunsh TYPE likp-kunnr,
    name1_sh TYPE kna1-name1,
    vbeln TYPE vbak-vbeln,
    posnr TYPE vbap-posnr,
    vbdel TYPE likp-vbeln,
    psdel TYPE lips-posnr,
    kunre type kunre, "Bill-to Party
    name1_re type kna1-name1, "Bill-to Party Name
    END OF it_vbpos,
    BEGIN OF it_vbpos_temp OCCURS 0,
    vgbel TYPE lips-vgbel,
    vgpos TYPE lips-vgpos,
    vbeln TYPE vbak-vbeln,
    posnr TYPE vbap-posnr,
    END OF it_vbpos_temp,
    BEGIN OF it_report OCCURS 0,
    werks TYPE vbap-werks,
    vbeln TYPE vbak-vbeln,
    vbdel TYPE likp-vbeln,
    audat TYPE vbak-audat,
    auart TYPE vbak-auart,
    name1_ag TYPE kna1-name1,
    name1_sh TYPE kna1-name1,
    name1_re type kna1-name1, "Bill-to Party Name
    mark(1) TYPE c,
    END OF it_report,
    BEGIN OF it_vbeln OCCURS 0,
    vbeln TYPE vbak-vbeln,
    END OF it_vbeln,
    wa_vbeln LIKE LINE OF it_vbeln,
    wa_vbpos LIKE LINE OF it_vbpos,
    wa_report LIKE LINE OF it_report,
    wa_sel LIKE LINE OF it_report.
    DATA: it_vbrp type table of vbrp,
    it_vbrk type table of vbrk.
    BDC Variables
    DATA: BEGIN OF bdc_tab OCCURS 0.
    INCLUDE STRUCTURE bdcdata.
    DATA: END OF bdc_tab.
    DATA: wa_bdc LIKE LINE OF bdc_tab,
    it_bdcmess TYPE TABLE OF bdcmsgcoll.
    *& Selection-Screen definition
    SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-002.
    PARAMETERS: p_rdff TYPE c RADIOBUTTON GROUP rad1 DEFAULT 'X',
    p_rdos TYPE c RADIOBUTTON GROUP rad1.
    SELECTION-SCREEN END OF BLOCK block2.
    SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-000.
    SELECT-OPTIONS: s_werks FOR vbap-werks OBLIGATORY NO INTERVALS,
    s_auart FOR vbak-auart,
    s_kunag FOR vbak-kunnr, "Sold-to Party
    s_kunnr FOR likp-kunnr, "Ship-to Party
    s_kunre for vbak-kunnr, "Bill to Party
    s_vdatu FOR vbak-vdatu OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK block0.
    SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
    PARAMETERS: p_vgbel TYPE vbak-vgbel.
    SELECTION-SCREEN END OF BLOCK block1.
    selection-screen begin of block block3 with frame title text-003.
    parameters: p_billed RADIOBUTTON GROUP r1,
    p_delvd RADIOBUTTON GROUP r1 default 'X',
    p_all RADIOBUTTON GROUP r1.
    selection-screen end of block block3.
    *& Include ZSD_PFGENERATEE01
    START-OF-SELECTION.
    PERFORM read_report.
    END-OF-SELECTION.
    SET PF-STATUS 'STAT1000'.
    IF it_vbpos[] IS INITIAL.
    MESSAGE s999(z001) WITH 'No Data Selected for this criteria'.
    ELSE.
    PERFORM show_report.
    ENDIF.
    *& List Events
    AT USER-COMMAND.
    CASE sy-ucomm.
    WHEN 'SELE'.
    LOOP AT it_report INTO wa_report.
    wa_report-mark = 'X'.
    MODIFY it_report FROM wa_report.
    ENDLOOP.
    PERFORM show_report.
    WHEN 'DSEL'.
    LOOP AT it_report INTO wa_report.
    wa_report-mark = ''.
    MODIFY it_report FROM wa_report.
    ENDLOOP.
    PERFORM show_report.
    ENDCASE.
    AT LINE-SELECTION.
    DO.
    READ LINE sy-index FIELD VALUE wa_report-mark wa_report-vbeln
    wa_report-vbdel.
    IF sy-subrc NE 0.
    EXIT.
    ELSE.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = wa_report-vbeln
    IMPORTING
    output = wa_report-vbeln.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = wa_report-vbdel
    IMPORTING
    output = wa_report-vbdel.
    READ TABLE it_report INTO wa_sel
    WITH KEY vbeln = wa_report-vbeln.
    IF sy-subrc EQ 0.
    wa_sel-mark = wa_report-mark.
    MODIFY it_report FROM wa_sel INDEX sy-tabix.
    ENDIF.
    ENDIF.
    ENDDO.
    REFRESH: it_vbeln.
    LOOP AT it_report INTO wa_report WHERE mark EQ 'X'.
    CASE 'X'.
    WHEN p_rdff.
    wa_vbeln = wa_report-vbdel.
    WHEN p_rdos.
    wa_vbeln = wa_report-vbeln.
    ENDCASE.
    APPEND wa_vbeln TO it_vbeln.
    ENDLOOP.
    SORT it_vbeln BY vbeln.
    DELETE ADJACENT DUPLICATES FROM it_vbeln.
    IF NOT it_vbeln[] IS INITIAL.
    PERFORM process_vf01.
    ENDIF.
    *& Include ZSD_PFGENERATEF01
    *& Form read_report
    Routine to read applicable orders from database
    FORM read_report.
    DATA: lwa_lips TYPE lips,
    lc_vbeln TYPE vbrk-vbeln.
    Retrieve sales orders based on selection criteria where billing doc has not been
    created for the delivery yet
    REFRESH: it_vbeln, it_vbpos, it_report.
    Select into table based on Onsite/Fixed Facility
    CASE 'X'.
    WHEN p_rdff.
    changed for performance reasons (i.e. time-out)
    k~vgbel is not in it_vbpos but was in select statment ?
    SELECT vbap~werks vbak~audat vbak~auart vbak~kunnr AS kunag
    vbak~vbeln vbap~posnr
    INTO CORRESPONDING FIELDS OF TABLE it_vbpos
    FROM vbak INNER JOIN vbap
    ON vbak~mandt = vbap~mandt
    AND vbak~vbeln = vbap~vbeln
    WHERE vbap~werks IN s_werks
    AND vbak~vdatu IN s_vdatu
    AND vbak~vkorg in (cns_vkorg,cns_vkorg_US)
    AND vbap~oid_ship IN s_kunnr
    AND vbak~kunnr IN s_kunag
    AND vbak~auart IN s_auart
    AND ( vbak~auart = 'ZWP' or vbak~auart = 'ZIF' or
    vbak~auart = 'ZCT' or vbak~auart = 'ZTM' or
    vbak~auart = 'ZOIL' ).
    IF SY-SUBRC = 0.
    SELECT vgbel vgpos vbeln posnr FROM lips
    INTO CORRESPONDING FIELDS OF TABLE it_vbpos_temp
    FOR ALL ENTRIES IN it_vbpos
    WHERE vgbel = it_vbpos-vbeln
    AND vgpos = it_vbpos-posnr
    %_hints oracle 'index ("LIPS" "LIPS~Z01")'.
    SORT it_vbpos_temp by vgbel vgpos.
    LOOP AT it_vbpos.
    READ TABLE it_vbpos_temp
    WITH KEY vgbel = it_vbpos-vbeln vgpos = it_vbpos-posnr
    BINARY SEARCH.
    IF SY-SUBRC = 0.
    it_vbpos-vbdel = it_vbpos_temp-vbeln.
    it_vbpos-psdel = it_vbpos_temp-posnr.
    modify it_vbpos.
    ENDIF.
    ENDLOOP.
    ENDIF.
    WHEN p_rdos.
    SELECT k~vbeln p~posnr k~kunnr AS kunag k~audat k~auart p~werks k~vgbel
    INTO CORRESPONDING FIELDS OF TABLE it_vbpos
    FROM vbak AS k INNER JOIN vbap AS p ON k~vbeln = p~vbeln
    WHERE p~werks IN s_werks AND k~vdatu IN s_vdatu AND
    k~vkorg in (cns_vkorg,cns_vkorg_US) AND "DEVK903521
    k~vgbel EQ p_vgbel AND
    k~kunnr IN s_kunag AND k~auart IN s_auart AND
    p~oid_ship IN s_kunnr.
    ENDCASE.
    Determine if delivery has been billed out, if not can create PF Invoice - CHANGED
    LOOP AT it_vbpos INTO wa_vbpos.
    Check Ship-to in
    SELECT SINGLE kunnr INTO wa_vbpos-kunsh FROM vbpa
    WHERE parvw EQ cns_parsh AND vbeln EQ wa_vbpos-vbeln.
    IF sy-subrc NE 0.
    DELETE TABLE it_vbpos FROM wa_vbpos.
    CONTINUE.
    ENDIF.
    Check for Bill-to
    select single kunnr into wa_vbpos-kunre from vbpa
    where parvw eq cns_parre and vbeln eq wa_vbpos-vbeln
    and kunnr in s_kunre.
    IF sy-subrc NE 0.
    DELETE TABLE it_vbpos FROM wa_vbpos.
    CONTINUE.
    ENDIF.
    Get Partner Texts
    SELECT SINGLE name1 INTO wa_vbpos-name1_ag FROM kna1
    WHERE kunnr EQ wa_vbpos-kunag.
    SELECT SINGLE name1 INTO wa_vbpos-name1_sh FROM kna1
    WHERE kunnr EQ wa_vbpos-kunsh.
    SELECT SINGLE name1 INTO wa_vbpos-name1_re FROM kna1
    WHERE kunnr EQ wa_vbpos-kunre.
    CASE 'X'.
    WHEN p_rdff.
    IF p_delvd = 'X'.
    optimized for performance reasons i.e. time-out
    Check if delivery has been billed out
    SELECT SINGLE k~vbeln INTO lc_vbeln
    FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
    WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
    p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
    k~fksto NE 'X'.
    refresh: it_vbrp, it_vbrk.
    select vbeln from vbrp
    into corresponding fields of table it_vbrp
    where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
    and vgpos = wa_vbpos-psdel
    %_hints oracle 'index ("VBRP" "VBRP~Z01")'.
    if sy-subrc = 0.
    sort it_vbrp by vbeln.
    delete adjacent duplicates from it_vbrp comparing vbeln.
    select vbeln from vbrk
    into corresponding fields of table it_vbrk
    for all entries in it_vbrp
    where vbeln = it_vbrp-vbeln
    and vbtyp = cns_intyp and fksto 'X'.
    IF sy-subrc EQ 0.
    DELETE TABLE it_vbpos FROM wa_vbpos.
    CONTINUE.
    ENDIF.
    endif.
    ELSEIF p_billed = 'X'.
    Check if delivery hasn't been billed out
    SELECT SINGLE k~vbeln INTO lc_vbeln
    FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
    WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
    p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
    k~fksto NE 'X'.
    refresh: it_vbrp, it_vbrk.
    select vbeln from vbrp
    into corresponding fields of table it_vbrp
    where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
    and vgpos = wa_vbpos-psdel
    %_hints oracle 'index ("VBRP" "VBRP~Z01")'.
    if sy-subrc = 0.
    sort it_vbrp by vbeln.
    delete adjacent duplicates from it_vbrp comparing vbeln.
    select vbeln from vbrk
    into corresponding fields of table it_vbrk
    for all entries in it_vbrp
    where vbeln = it_vbrp-vbeln
    and vbtyp = cns_intyp and fksto 'X'.
    IF sy-subrc NE 0.
    DELETE TABLE it_vbpos FROM wa_vbpos.
    CONTINUE.
    ENDIF.
    endif.
    ENDIF.
    WHEN p_rdos.
    IF p_delvd = 'X'.
    Check if order has been billed out
    SELECT SINGLE * FROM vbrp
    WHERE vbeln EQ wa_vbpos-vbeln AND
    vgpos EQ wa_vbpos-posnr.
    IF sy-subrc EQ 0.
    DELETE TABLE it_vbpos FROM wa_vbpos.
    CONTINUE.
    ENDIF.
    ELSEIF p_billed = 'X'.
    Check if delivery hasn't been billed out
    SELECT SINGLE k~vbeln INTO lc_vbeln
    FROM vbrp AS p INNER JOIN vbrk AS k ON pvbeln = kvbeln
    WHERE pvgtyp EQ cns_vgtyp AND pvgbel EQ wa_vbpos-vbdel AND
    pvgpos EQ wa_vbpos-psdel AND kvbtyp EQ cns_intyp AND
    k~fksto NE 'X'.
    refresh: it_vbrp, it_vbrk.
    select vbeln from vbrp
    into corresponding fields of table it_vbrp
    where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
    and vgpos = wa_vbpos-psdel
    %_hints oracle 'index ("VBRP" "VBRP~Z01")'.
    if sy-subrc = 0.
    sort it_vbrp by vbeln.
    delete adjacent duplicates from it_vbrp comparing vbeln.
    select vbeln from vbrk
    into corresponding fields of table it_vbrk
    for all entries in it_vbrp
    where vbeln = it_vbrp-vbeln
    and vbtyp = cns_intyp and fksto 'X'.
    IF sy-subrc NE 0.
    DELETE TABLE it_vbpos FROM wa_vbpos.
    CONTINUE.
    ENDIF.
    endif.
    ENDIF.
    ENDCASE.
    MOVE-CORRESPONDING wa_vbpos TO wa_report.
    APPEND wa_report TO it_report.
    MODIFY it_vbpos FROM wa_vbpos.
    ENDLOOP.
    if 'onsite field summary', then process by release sales orders
    IF p_rdos = 'X'.
    sort it_report by vbeln.
    delete adjacent duplicates from it_report comparing vbeln.
    else.
    SORT it_report BY werks name1_ag name1_sh vbeln.
    DELETE ADJACENT DUPLICATES FROM it_report.
    endif.
    SORT it_report BY name1_sh werks name1_ag vbeln.
    ENDFORM. " read_report
    *& Form process_vf01
    Call transaction VF01 and fill screen table with order values
    FORM process_vf01.
    DATA: ln_index(2) TYPE n,
    lc_field(20) TYPE c,
    lc_fkart TYPE vbrk-fkart,
    li_lines TYPE i,
    lc_msgtxt(99) TYPE c,
    lwa_bdcoptions TYPE ctu_params,
    lwa_mess LIKE LINE OF it_bdcmess.
    REFRESH: it_bdcmess.
    lwa_bdcoptions-dismode = cns_mode.
    lwa_bdcoptions-updmode = cns_upd.
    CASE 'X'.
    WHEN p_rdff.
    lc_fkart = cns_fkff.
    WHEN p_rdos.
    lc_fkart = cns_fkos.
    ENDCASE.
    REFRESH: bdc_tab.
    PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
    ' ' 'BDC_CURSOR' 'RV60A-FKART',
    ' ' 'RV60A-FKART' lc_fkart,
    ' ' 'BDC_OKCODE' '/00'.
    LOOP AT it_vbeln INTO wa_vbeln.
    ln_index = sy-tabix.
    Up to the second delivery of the BDC add the Delivery to the screen, after that click the More Documents for every entry. logic changed for DEVK902353
    CASE ln_index.
    WHEN 1.
    CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
    PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
    WHEN 2 OR 3.
    IF p_rdos 'X'.
    CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
    PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
    'X' 'SAPMV60A' '0102',
    ' ' 'BDC_OKCODE' 'FKAN'..
    ELSE.
    CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
    PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
    ENDIF.
    WHEN OTHERS.
    If p_rdos 'X'.
    CONCATENATE 'KOMFK-VBELN' '(2)' INTO lc_field.
    PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
    'X' 'SAPMV60A' '0102',
    ' ' 'BDC_OKCODE' 'FKAN'.
    endif.
    ENDCASE.
    ENDLOOP.
    VF01 will go to a different screen if only one line selected
    DESCRIBE TABLE it_vbeln LINES li_lines.
    IF li_lines EQ 1.
    PERFORM update_bdc USING: 'X' 'SAPMV60A' '0104',
    ' ' 'BDC_OKCODE' '=SICH'.
    ELSE.
    PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
    ' ' 'BDC_OKCODE' '=SICH'.
    ENDIF.
    CALL TRANSACTION 'VF01' USING bdc_tab OPTIONS FROM lwa_bdcoptions
    MESSAGES INTO it_bdcmess.
    WRITE: / 'BDC Messages:'.
    SKIP.
    LOOP AT it_bdcmess INTO lwa_mess.
    CALL FUNCTION 'RH_MESSAGE_GET'
    EXPORTING
    arbgb = 'VF'
    msgnr = lwa_mess-msgnr
    msgv1 = lwa_mess-msgv1
    msgv2 = lwa_mess-msgv2
    msgv3 = lwa_mess-msgv3
    msgv4 = lwa_mess-msgv4
    IMPORTING
    msgtext = lc_msgtxt
    EXCEPTIONS
    message_not_found = 1
    OTHERS = 2.
    WRITE: /5 lc_msgtxt.
    ENDLOOP.
    ENDFORM. " process_vf01
    form update_bdc *
    subroutine to add the data to the bdc table for trans. vf01 *
    FORM update_bdc USING dynpro field content.
    CLEAR bdc_tab.
    IF dynpro EQ 'X'.
    bdc_tab-program = field.
    bdc_tab-dynpro = content.
    bdc_tab-dynbegin = 'X'.
    ELSE.
    bdc_tab-fnam = field.
    bdc_tab-fval = content.
    ENDIF.
    APPEND bdc_tab.
    ENDFORM. "UPDATE_BDC
    *& Form show_report
    Report to Display Available Orders on Screen
    FORM show_report .
    DATA: l_idx TYPE i.
    WRITE: / 'Available Orders/Deliveries for Plant:'.
    LOOP AT s_werks.
    WRITE: s_werks-low.
    ENDLOOP.
    SKIP.
    FORMAT INTENSIFIED ON COLOR COL_HEADING.
    WRITE: /5 text-h01, text-h02.
    CASE 'X'.
    WHEN p_rdff.
    WRITE: text-h06.
    ENDCASE.
    WRITE: text-h03, text-h04, text-h05, text-h07,
    / sy-uline.
    FORMAT INTENSIFIED OFF COLOR OFF.
    l_idx = 0.
    LOOP AT it_report INTO wa_report.
    IF l_idx EQ 0.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    l_idx = 1.
    ELSE.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    l_idx = 0.
    ENDIF.
    WRITE: / wa_report-mark AS CHECKBOX,
    wa_report-auart UNDER text-h01,
    wa_report-vbeln UNDER text-h02.
    CASE 'X'.
    WHEN p_rdff.
    WRITE: wa_report-vbdel UNDER text-h06.
    ENDCASE.
    WRITE: wa_report-audat UNDER text-h03,
    wa_report-name1_ag UNDER text-h04,
    wa_report-name1_sh UNDER text-h05,
    wa_report-name1_re under text-h07.
    HIDE: wa_report-mark, wa_report-vbeln, wa_report-vbdel.
    ENDLOOP.
    ENDFORM. " show_report
    Thanks for your kind help.
    Aarav.

    Hi, Anne-Marie;
    You may be running into a common issue that is docuemented here:
    [SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
    Regards,
    Jonathan
    Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

  • Selection criteria are not applied to summary fields on group footers.

    I wonder if anyone can help me with this problem.  I am using Crystal reports version 11.2, and my data source is a Sql Server view.
    The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
    The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
    So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
    ie ....                record1                      2
                           record2                      8   
                           group level total         10
    This works fine when I run the report using Crystal's "print preview" facility.  However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                           record1                      2
                           record2                      8   
                           group level total          19
    I tried putting the date selection criteria at both record and group level, but that did not work.
    I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above.  However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
    In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
    In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer.  In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
    While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
    The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae.  The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them.  And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
    Please tell me that there is something simple that I have been doing wrong!!!  If I have not given enough information for you to answer, please let me know.
    Thanks,
    Anne-Marie

    Hi, Anne-Marie;
    You may be running into a common issue that is docuemented here:
    [SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
    Regards,
    Jonathan
    Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

  • Work Order Reporting using I_BEGRP as a selection criteria

    Hello all,
    I am having a small problem regarding the authorization object I_BEGRP, which appears at general data informed tab at equipment level. The situation is as described below:
    Our client has several subcontractors working with Maintenance Work Orders in the system, and in order to control that each subcontractor does only access to their own data (equipment, work orders, etc.) different authorization group has been used to assign each of the equipment.
    Problem is now when the client needs to be able to know the list of MWO per subcontractor.
    The need is clear: for a user that is not restricted by this authorization group, it cannot be usedas a selection criteria to obtain a list of WO of a certain subcontractor.
    I have seen that it can be shown in the equipment standard report IH08, but only as exit data, but not as entry selection criteria, but neither for MWO (IW39) nor for notifications (IW29) it can be used as an entry selection criteria.
    Can someone help me with this issue? is the only solution to make a custom development, and to copy program RIAUFK20 in order to allow this field as an input?
    Thank you very much for your help.
    BR,
    Francesc.

    Hi,
    the only workaround I can think of is to use suitable search help for equipment. So the process would be to run IW29, open search help for equipment that allows you to specify authorization group (I think Equipment by Equipment list should work), then select all equipments from the auth. group and then run IW29 restricted by equipments. It's not nice but it allows you to select all orders that have equipments assigned to some specific authorization group. Otherwise you need to enhance standard reports to allow authorization group as one of the select options.
    Cheers

  • How to suppress blank page and selection criteria in SPOOL ?

    My Z program submits two programs to spool and converts the ABAP List in the spool to PDF and emails.
    After upgrade to ECC6, the first (a report painter report) resulting PDF there was one blank page and the contents were displayed on second page. For the second report (RKPEP003 - CJI3)  the selection criteria that the report used was printed as the first page of output and the result on a subsequent page. The same thing happens when I individually execute these two reports directly in SE38 with the same selection criteria. I believe the blank page is there in the spool because when I view the spool as a RAW, there is a P in the first column, however the spool shows that there is only one page in the first and two in the second (this is true - one for selection criteria "which I don't want" and then the actual content). In 46C, when I look at the RAW view of the spool there is no additional P's in the first column.
    I do not want to have the blank page on the first report and the selection criteria listed on the output of the report. How can I do that ? I am thinking get_print_parameters can in someway get me there, but I am not sure.
    Thanks
    Hari
    Edited by: Hari Sudarsanan on Apr 8, 2009 7:28 PM
    Edited by: Hari Sudarsanan on Apr 8, 2009 8:05 PM

    The first report painter program writes a regular ABAP list.
    The second outputs an ALV.

Maybe you are looking for