KP06 - percentage automatic calculation

Hi,
Please let me know in KP06 I have value under plan variable cost in combination with cost center - activity type and cost element against distribution key as 2. Now I change the staus as 3 (Distribution by percentage) and click on change value. Under Revaluation factor I put .80(80%) and clicked Revaluate button. Instead of changing automatically 80% on value provided under plan variable cost it shows wrong figure after calculation. I have Rs, 200000 under plan variable cost. If I want to get 80% less value after deducting from Rs, 200000 automatically how I can change automatically from this screen ?
Kindly let me know.
Best regards,
Samrat

Hi Samrat
This is a bit tricky...
When you choose Dist key 3, the Plan value that you enter (as fixed or variable value) is treated as a percentage and not as a value
For eg: I entered plan value in KP06 as 10,000 against Dist key 2.. Now, when you change 2 to 3 - System would multiply 10,000 (plan value) by 10,000% and the result will be 1,000,000.0
For what you want, just do not change the dist key... What you are trying to get out of the system is 40,000 from 200,000.... for this
1. Enter Plan value as 200,000 against dist key 0 or 2
2. Click on "Change values"
3. Enter -80 as revaluation factor
4. Click on "revaluate"
5. Save
Regards
Ajay M

Similar Messages

  • Automatic calculation of numeric value enter in Survey

    while creating Survey in Survey Suit we enetr numeric value in field .
    my requirement is that can we do automatic calculation of these numeric
    values in Survey its self
    Regards,
    Anup Reche
    9268133864

    Hi Anup,
    Check if the following links help you:
    /people/gregor.wolf3/blog/2006/07/22/create-run-and-analyze-an-e-mail-campaign-with-a-survey-part-1
    /people/gregor.wolf3/blog/2006/05/11/advanced-campaign-automation-in-mysap-crm-40-teaser
    http://help.sap.com/saphelp_nw04/helpdata/en/02/739fe7a80746caa668958d558993ae/frameset.htm
    Hope this helps!
    Regards,
    Saumya

  • Create a program for Automatic calculation of Interest on arrears for Custo

    Hello Experts,
    Please Check the below requirement and guide me according ly..
    Upto now our client is preparing the interest manually in excel and later they issue the invoice in Finance module (DR document) and attach the paper with the calculation.
    Now they would like to have an automatic process for all the customers  with the exception of the Intercompany.
    The keys indicator will be:
    Interest term:
    Capital     * Days of delay/ 360     * interest rate(see table)     
                      (Legend days of delay= new duedate agreed - original duedate of invoice)
    -Calculate interest based on line items (open items and items cleared with a payment)
    -Calendar: 360 days
    -Transfer days: zero
    -Tolerance days: zero
    -Interest processing: amount limit  20u20AC
    -Posting;
          Terms of payment: blank (to be define case by case)
          Tax code: VJ NS Art 15 I comma
    The interest will be registered only if we have posted the invoice in the system.
    I confirm that the account number will be  5401000 cost center     C010100238
    Please suggest me how we can develop a programme
    Thanks in advance,
    Satya

    Hi,
    You need to configure INTEREST CALCULATION setup in system in order to automate the posting interest to customers / vendors.
    [Interest Calculation |http://wiki.sdn.sap.com/wiki/display/ERPFI/Interest+Calculation]
    Regards,
    Srinu

  • Automatic Calculation of Input Tax in a Purchase Order

    Hi  SAP Gurus!
    Good day! Please help with my problem. During my creation of a Purchase Order, I will have to indicate what Tax Code to use. In this case, I use "Input Tax 12%". On the Item Condition TAB, the calculation of the input tax is not reflected. How can I customize this, in order for us to see the breakdown of Taxes automatically?
    Thank you.
    Mik

    Hi Mik,
                If you maintain the tax codes in the system for your company code then the tax codes will be picked automatically in PO through FTXP and the same is reflected in PO.In Invoice tab you have to give tax code, then in Condition tab, the values will be calculated as per the condition values maintained for the tax code.No need to maintain any thing in pricing procedure.
                If your tax procedure in TAXINN, you have to maintain the condition records for the condition types ( JMOP, JEC1, JSEP etc..), then only the values can be shown in PO in Condition tab.In TAXINN, the tax code has to be assigned to the company code.
    Regards,
    Gangadhar Y

  • Problem of percentage in calculated KF

    Hi,
    I am trying to get the percentage share of a calculated KF. its something like this
    col -> RKF1  RKF2 CKF(RKF1 + RKF 2)
    row1:392150 0  392150
    row2:410925 101298  512223
    %(row1%Arow2): 95% --  95%
    The last % value should be 76% but it doesn;t take the total for the calculation. How can i correct this??

    Hi,
    this expression is correct. Do you have cells in this report?
    Regards.

  • Problem of percentage with calculated KF

    Hi,
    I am trying to get the percentage share of a calculated KF. its something like this
    col -> RKF1  RKF2 CKF(RKF1 + RKF 2)
    row1:392150 0  392150
    row2:410925 101298  512223
    %(row1%A row2): 95% --  95%
    The last % value should be 76% but it doesn;t take the total for the calculation. How can i correct this??
    Regards,
    Sujai

    Hi,
    Please use Formula Collision in your report on this % calculation.
    This will solve your problem.
    -Vikram

  • Percentage Variance calculation problem

    Hi experts,
    I have report with following scenarios:
    <h3>Account Name---ActualBudget---Variance --Variance Percentage </h3>
    Account Level 1______3400_______5200____-1800______________X
    -Account Level 2______2200_______4200_____-2000______________XX
    --Account Level 3______1000_______2000_____-1000_______________-50
    --Account Level 3______1200_______2200_____-1000_______________-45.45454545
    -Account Level 2______1200_______1000_____200________________XX
    This is how the report is now displayed. I have done a Hierarchical Grouping of database field (Field Account). Here the Actual and Budget columsn are the summary fields with "sum" and the Summarize across hierarchy checked.. The formula for Variance Percentage is
    if Budget =0 then 0
    else  ((Variance/Budget)*100)
    Now, all the output is displayed in Group Header. The problem here is the calculation of Variance Percentage of Levels above Level3 i.e. Level 2 and Level 1. Level 2 percentage should be the calculation of (Variance / Budget ) *100 of that Level only i.e. Level2 and same should be the case for Level 1. When I apply the summary field on this column, the percentage calculation is all wrong as the Level 2 will be sum of Level 2 variance percentages which is not correct output.
    I need a solution to this quickly.. if some more clarification is required please reply to this post..
    Thanks

    Don't use a summarized field. Instead create a formula field
    Right Click on the formula field which will be there in your Field Explorer --> Select New --> Provide the name for your formula field in the text box shown
    and put the condition there like
    if {test.Budget} =0 then 0
    else  (({test.Variance}/{test.Budget})*100)
    Once formula field is created place in the desired location where you need to show the Variance Percentage.
    Hope this helps!

  • Line total commssion percentage auto calculation

    Dear All,
    I want to have an option by which when I create a marketing document and in the item row if I create a udf as commission percentage and commision amount, based on the value of line total if I put commission percentage as 20 % of the line total i.e 1000 then in comission amount 200 should come automatically.
    How to do this...can any one tell me how this can be done through query or formated search.
    Thanks in advance.
    Regards,
    Kawish

    Kawish,
    What are the names of the 2 user fields and what are their types?
    Let us presume the Comm % field is called CommPer and Commission Total is called CommTotal
    SELECT $\[$38.21.Number]*($\[$38.U_CommPer.Number]/100)
    Link this to the Commission Total column
    Please change the UDF names as per your definition

  • Automatic calculation for batch characteristic

    Conversion factor is a batch characteristic which is to be calculated based on the other batch characteristics values entered by the user at the time of confirmation.
    I have maintained the objectdependency in the batch class (023). The dependency type maintained is "Procedure".  The batch class is assigned to material master. The formula is as follows
    $self.conversionfactor=((($self.actthickness-0.067)*$self.density)
    ($self.paintgsm$self.metalgsm))*$self.width/1000
    The formula is appearing in 2 lines in the dependency editor. There is no syntax error. As well as the dependency status is also "released".
    But at the time of confirmation, if the values of the other characteristics are entered, no calculation for the characteristic conversion factor is done by the system.
    Can anybody please guide on this???
    Regards,
    Manish

    thanks a lot

  • Automatic calculation of charging of interest on late payment onLO

    Hi.
    my query is that user want that SAP calculate interest on late payment  automatically for lease out.
    is it possible in real estate?

    Hi,
    As Franz said, there is no standard functionality in RE, but you could use the Adjustment program to achieve that result.
    You can customize an index based rule with your interest rate and default that adjustment rule for the condition that needs to be accounted for interest.
    The problem is that if you choose to follow this approach, you will have no intergration with FI-AP and the adjustment program will not check which contracts are overdue and which not.
    KR,
    Severina Kolleva

  • Can I add a formula and automatic calculations in a form?

    We would like to put formulas och autoomatic calculations in our forms, is that possible?

    Hi,
    Here are some links that may be helpful:
    http://forums.adobe.com/docs/DOC-3661
    http://tv.adobe.com/watch/acrobat-xi-tips-tricks/how-to-work-with-formulas-in-formscentral /
    http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-do-i-use-basic-calculations-in-a-form/
    https://forums.adobe.com/message/1098735
    Please check the Acrobat forums if you have further questions on Adobe Acrobat: https://forums.adobe.com/community/acrobat
    Thanks,
    Lucia

  • Percentage with calculated Key figure in queru designer

    Hi,
    I have this problem with query designer.
    I want to calculate a share over sub total in a query with 3 characteristic exploded: one in vertical (project)
    and 2 in horizzontal (quarter and year). I am using query designer 7.0.
    I have created a calculated KF with function CT% but, instead to have the percentege over subtotal, I have the percentege over total.
    This is the example of what I would like to get:
                        quarter  1                                               2
                            year  2007                 2008                 2007                  2008
                                    Cost   % cost    Cost   % cost    Cost   % cost     Cost   % cost
    Project
    Total                        27365    100%      30155   100%   29300   100%   29875   100%
    PRJ 1                        820      2,99%     1100     3,65%   930     3.17%   860     2,88%
    Could anyone help me ?
    Thank you !
    Bye.
    Elena

    Hi,
    create two restricted keyfigs:
    KF1 restricted to one of your 0CALYEAR
    KF2 restricted to the other year
    Create a formula or CKF, KF3 = KF1 - KF2
    Implement your TOP N condition on KF3
    hope this helps...
    Olivier.

  • Table for the recorded result.Result automatically calculated using formula

    Hi experts,
              I want to know where this results will be saved(table name) when we use formula in inspection plan.I have marked char.calc in control indicator and formula has been entered in inspection plan.While entering the result when i click on calc button it is displaying correct result and i have saved.when i check the table QAMR,QASR it is not displaying the result for the MIC which i have used formula.I am able to see the formula in QAMV table.When i want to display this result can i retrive the result directly from any of the table or shall i calculate the formula in the program to display?   If i should calculate the formula how to calculate?
    Regards,
    Shwetha.

    Hii,
    If u are using Inspection point for the results recording then results will get stored in QASR table. The manually entered results alone will get stored in the Original_ Input field. Calculated parameters will get stored in the mittelwert field (mean value). Kindly check QASE table for lot without inspection points.
    For ex : Results Field name mean value (1.7500000000E+02)
    with regards,
    K.Lokesh.

  • Vendor Evaluation Automatic calculation

    Dear Experts ,
    How can I calculate delivery and quality main criteria  Automatically in Vendor evaluation.
    Thanks & Regards

    Hi,
    Use T Code ME63 to get output by the system.  Select Weighting Key and click on all logs to get the report.
    - You should have some transactions done in the system.
    To maintain the IMG settings :
    SPRO>Material Management > Purchasing>Vendor Evaluation>
    1. Define Weighting Keys (Need to define factors like Equal & Unequal )
    2. Define Criteria (Need to define Criteria - Price, Quality, Delivery)
    3.Define Scope of List & (Ranking)
    4.Maintain Purchase Org (Maintain Values in Pur Org with Factors and their scores)
    (If you have already maintained the above settings you would simply need to use Tcode ME63)
    Use T Code ME63 to get output by the system.  Select Weighting Key and click on all logs to get the report.
    (You should have some transactions done in the system )
    Hope this helps,
    Amit Bakshi

  • HIGH PRIORITY:Automatic calculation of Allowable Depreciation using Dep key

    HI SAP Gurus,
    Please help me on this requirement ASAP:
    Asset: 10008009
    Asset class AM&E
    Acquisition cost: JPY2,731,807
    Acquisition date: Apr.25,2007
    Depn key: ZA10
    Life: 8Year (0.25)
    expected value for asset number 10008009 is as follows,
    Year           depreciation          Net book value
    Y2007        JPY341,476        JPY2,390,331    (2,731,807x0.25/12*6month)
    Y2008        JPY597,583        JPY1,792,748    (2,390,331x0.25)
    Y2009        JPY448,187        JPY1,344,561    (1,792,748x0.25)
    Y2010        JPY336,140        JPY1,008,421    (1,344,561x0.25)
    Y2011        JPY252,105        JPY   756,316    (1,008,421x0.25)
    Y2012        JPY189,079        JPY   567,237    (   756,316x0.25)
    Y2013        JPY141,809        JPY   425,428    (   567,237x0.25)
    Y2014        JPY106,357        JPY   319,071    (   425,428x0.25)
    Y2015        JPY  79,768        JPY   239,303    (   319,071x0.25 <  319,071-2,731,807x0.05)**
    The remaining value of asset reaches 10% of acquisition cost in FY2015, thereafter, the remaining value can be depreciated at the same year (allowable limit for depreciation is (NBVx0.25)).
    Y2016        JPY  59,826        JPY   179,477 (239,303x0.25 < 239,303-2,731,807x0.05)**
    Y2017        JPY  42,887        JPY   136,590 (179,477x0.25 > 179,477-2,731,807x0.05)**
    *Either of lower value, allowable limit for depreciation (NBVx0.25) or remaining value of asset reaches 5% (NBV-(Acquisition cost0.05)) is applied.
    The allowable limit for depreciation as a limit, and depreciation is continued until the net book value reaches up to 5%.
    Surely the net book value at the end of year 2015 shows a value of JPY 136,590 which is equal to 5% of 2,731,807. However, the allowable limit for depreciation also need to be considered.
    Is the above scenario possible in SPRO? Please give me a call to discuss.
    Regards,
    Sreeni
    +9199860 32960

    I think I had the cart before the horse on this problem.  The correct way to look at this is what is the best way to get the correct "Net Book Value" and not the correct tax depreciation posting as it never actually gets booked.  
    By knowing the incorrect Beginning BV, the rate depreciation is applied in year 1 and finally the desired Net BV value at the end of year 1 for tax purposes I am able to calculate the correct Unplanned Depreciation for tax to make everything work out correctly.
    correct beginning tax BV $1,200
    Beginning Asset Book Value $1,800
    depreciation $360 (20% of BV)
    Unplanned depreciation  $?
    Net BV for tax at end of Yr1  $960 ;  or  1,200 - (1,200*.2)
    With the know values above that makes my unplanned depreciation for Yr 1 to be $480.  Year 1 and all following years depreciate correctly after the Unplanned Depreciation is posted.
    I am marking this as resolved unless someone sees an error in my thinking.
    Thanks,
    Jeff

Maybe you are looking for