Kurzweil PC88 midi keyboard doesn't work!

I have the latest version of Logic 9.1.1
I bought a 1x1midi tab one end usb directly plugged into computer to midi end plugged into my Kurzweil keyboard. I am getting no midi.
Can anyone give me advice as to what is going wrong?
Thanks!

Hi marykeys,
I bought a brand new Kurzweil PC88 12 years ago and still working incredible! As far as being recognized by Logic (Express, Pro, Studio, etc), I have never had any problems, except for one situation with an M-Audio Midisport 2x2. What I currently use is the M-Audio UNO USB MIDI interface and works perfect! Really simple and friendly device and have never heard any bad review from it.
Still try to look for setup issues in your computer, before even thinking about reseting your PC88.
- Go to "Audio MIDI Setup" / "MIDI Devices tab and run the "Rescan MIDI" (Make sure the keyboard is on and properly connected through your MIDI interface -also ON and connected). If not the keyboard, the Interface should show up.
- If nothing happened, click on "Add Device" and then double click on the new device appearing as "new external device". Fill the information of Device Name/Manufacturer/Model (this is just to make things more organized) and then click on "Port". Press YES to the question that might ask you and then see if in the "Ports" area is available the Port 1. Usually the MIDI interfaces gets the Port 1 by default. If not, then something could be happening with your interface. Having created the new device, run the scan again. If you see the MIDI interface that's perfect and the following step is to connect the Interface with the new device by dragging the mouse from one device to another (the small triangles) and so they should end up being connected with two "wires". Then you can run the test and click on the new device. While having the click pressed, press some keys on your PC88 and you should get several bips, as much as keys you play. Try also to see if E-MU have any software update for your Operating System (remember that most drivers has been updated and transformed since the Intel era on Mac).
- If this works, then make sure to double check Logic preferences. Go to "MIDI" and in the General Tab of MIDI, press "Reset All MIDI Drivers". This will help to renew Logic's information about new changes on the MIDI Setup of your computer.
- If this doesn't work, you should consider a different MIDI interface and also contacting Kurzweil (YoungChang) for further information, not to have your PC88 reseted, unless you have nothing to lose.
Good Luck!

Similar Messages

Yamaha KX61 USb MIDI keyboard doesn't work in Garage Band

I have installed latest Yamaha USB-MIDI driver V1.2.0 for Yamaha KX61.
I have connected USB cable to Mac Mini and turned the keyboard on.
In Other section of System Preferences I can see an icon for Yamaha USB-MIDI. In there I can see Device Name: Yamaha KX.
Yamaha KX61 is visible in Audio MIDI Setup utility under Midi Devices tab with Port 1, 2 and 3.
In GarageBand application Audio/MIDI preferences it shows "3 MIDI inputs detected" but Audio Input gives 2 choices only: System Setting and Built-In Input.
When I turn Keyboard off, Garage Band responds with message "The number of MIDI inputs has changed. Now no input is available." And then it shows MIDI status: 0 MIDI Input(s) detected.
When I turn Keyboard on, Garage Band responds with message "The number of MIDI inputs has changed. Now 3 inputs are available." And then it shows MIDI status: 3 MIDI Input(s) detected.
I don't understand how to get the keyboard play with Garage Band when adding new software instrument tack.
If anybody able to use KX61 in Garage Band, please share your experience.

Hope its ok to answer you own question.
Just buy the Apple "Lightning to usb camera adapter". Plug it into the ipad 4 and plug your usb male A cable from the midi keyboard into it and fire up the apps. Works fine--I just tested it. You must have a keyboard or other usb device that requires very little or no power from the usb port in order to work. Also, it must not require a usb driver. See iosmidi.com/devices for a list of devices that should work.
A lot of investigation (not on any apple site) allowed me to glean out this information.

Midi keyboard doesn't work every once in a while

This is the most strangest thing I have encountered so far. Everything is working, putting notes into Logic via my midi controller. All of a sudden, it stops working. I try to play notes on the keyboard but nothing, no response. I can play them fine with the mouse on the virtual keyboard (on one of the instances - Kontakt 3), but not via my controller. I don't push any buttons by accident either for it to stop working.
I close the project, reopen it, but nothing. I restart the computer but nothing. If I open a new project THEN it works. I have it set on midi channel 1. Sometimes I switch it to omni and it starts working. But not lately.
What is the problem here?
Thanks.

What make and type is it?

Apple Wireless Keyboard doesn't work in Vista Ultmate?

My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
Should I install the driver in Mac OS first or update the keyboard firmware?
Or install a driver for Windows Vista (I can't find any on web...)
Please kindly help! Thanks a lot.

this problem is fixed, but if anybody has an idea what happened, I would like to know.

I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

I have an iMac and my keyboard doesn't work. How can I fix it. Got it in 2011. Also my mouse is acting up

What OS X are you running and do you have USB or Wireless input devices...?
For wireless devices, take a look at > Troubleshooting wireless mouse and keyboard issues
USB keyboards and mice generally don't have connection issues, but they and there cords do occasionally go bad.

Problem with XP Pro sp1 install - keyboard doesn't work - MBP

After using bootcamp to repartition the HD and rebooting with an xp pro sp1 cd, the blue windows installer loads and runs fine up to where you need to press the enter button to install windows or F3 to exit. At this point, the keyboard doesn't work at all and I have to push the power button. I also can not load osx or the osx boot disc, but the xp disc still loads fine. Currently working on slipstreaming a w/ sp2 to see if this will fix the problem. Prior to bootcamp, I upgraded osx and my firmware. Anyone else encounter this?

You need to use SP2. There is a reason it's recommended by Apple. If you have a valid XP install disk you can easily slipstream it with SP2, which is perfectly legal and effective, and is a relatively painless process.
http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html
Nick

KEYBOARD DOESN'T WORK IN ALL JAVA APPS

I think there are a bug with Java,
but some keys of my French keyboard doesn't work with ALL Java APPS (Solaris Management console...), but work fine with all other apps.
When I use Xsun, there are no problem, all keys work, but with Xorg, some keys doesn't work. (Only in Java Apps).
I had got this bug with Sun Solaris 10 and Sun Solaris 11 (6/05 Express)
This is a very nasty bug, I have got a PS/2 keyboard.
Willits

Enable multilib repo in /etc/pacman.conf , pacman -Syy and pacman -S flashplugin
Last edited by Halcyon22 (2010-09-14 13:34:53)

The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

The backlight of keyboard doesn't work in win7, with a well setup bootcamp drivers

Forum and support for Boot Camp:
http://www.apple.com/support/bootcamp

Italian keyboard doesn't work under the gui

I have an italian keyboard on a x86 Solaris 10 installation.
All the patch available using Sun Update applied but the keyboard doesn't work, it still works only as a USA keyboard.
Forcing it as a Italian layout at startup (pressing esc and using the boot utility) make the keyboard work in the consolle with the correct layout but under the gui, after the dtlogin startup, the key doesn't work correctly. Every key is "shifted" of one position, so inserting "root" result in "eiir"
Even applyng the 118966-08 patch as suggested doesn't work.
Obiouvsly I used the gnome panel to set the correct keyboard under gnome but with no result
Both the two type of italian keyboards don't work, the standard one and the 104 "ibm" italian layout.
All this keyboards work fine on the same PC with both WindowsXP and Linux Ubuntu.
Any suggestion to fix this ?

The solution was to reconfigure the X-Server: In a console-window I called kdmconfig and corrected the keyboard settings: it was a US-Keyboard. Nobody knows ... At installation time I configured a german keyboard.
A remaining problem is that my mouse and keyboard are connected via USB and they are frozzen after boot. First when I physicaly detach both and reconnect them they start working in an ordinary manner. I saw a forum entry which talked about BIOS-settings.

How can I do Safe Boot if keyboard doesn't work

iMac frozen at restart and keyboard doesn't work. Appreciate any ideas on how I can reboot.

Do you have a wired or wireless keyboard? If you have a wireless one, using a wired one temporarily might help with this. Otherewise, it sounds like you have a hardware failure, possibly hard drive or logic board. In any case I would then recommend taking it in for a Diagnosis and service.

10.5.6 USB apple aluminum keyboard doesn't work...help!

After installing 10.5.6 my apple keyboard doesn't work, but the apple mouse plugged into the keyboard works fine. I installed the combo update and it still doesn't work. Any ideas?

I also have the same problem with a MacMini running MacOS 10.5.6 Server. The Al Apple Keyboard (wired) does not show up in the USB tree. However, the wireless one (over bluetooth) works fine.
help!

Keyboard doesn't work in few games

Hi,
I found that in few games for Mac, like Prison Architect letters on keyboard doesn't work, what it can be?
Mac OS X 10.7.5

paldepind wrote:Yop.
You could probably try running without an xorg.conf (still make sure hal is running).

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

My MacBook Pro keyboard doesn't work to log in, but lets me type if I'm logged in as a guest. What do I do?

OK, some more info.
I have re-installed os/x and applied all of the updates.
I have tried to migrate my existing accounts and the problem consistently manifests as below:
1. In a new user account, I can log in and use the keyboard then logout
2. If I log in to the migrated user account, the non-numeric keys on the keyboard do not work. If I then log out, and try to log in to another account on the same machine, the non-numeric keys continue not to work.
This would seem to suggest that as the profiles being migrated are on a machine with the same version of up to date OS/X, the issue lies with either the Macbook Pro (other people have also had keyboard problems) or with the migration assistant not working properly given that the current profiles work fine on another mac.
Any more ideas anyone?

Can't set up windows on bootcamp, keyboard doesn't work

okay, i wait through the agony of the windows install non-sense, and it comes up to the part where i have to set up windows (name, accounts, etc.). But when i go to enter all my info, my keyboard doesn't work, or my mouse for that matter. I have a 24" iMac with the wireless keyboard and mouse. I don't know what to do!
Message was edited by: jayqUon

Jay:
Below is excerpt I took from [HERE|http://support.apple.com/kb/HT1461] which mandates using an internal keyboard or a USB keyboard/mouse to install Windows via boot camp.
Requirements
To use Boot Camp, you need:
1. *An Intel-based Macintosh computer with a built-in or USB keyboard and a built-in trackpad or USB mouse.*
2. Mac OS X 10.5 or later
3. The latest firmware updates available for your Intel-based Mac.
4. At least 10 GB of free space on your startup disk (single partition).
5. A full, single-disc version of Windows Vista, Windows XP Home Edition or Professional with Service Pack 2 or later. Boot Camp does not include Windows. You must provide your own properly licensed installation disc.
Important: A Windows XP installation disc must include Service Pack 2 (SP2). You cannot install an earlier version of Windows and upgrade to Windows XP, nor install an earlier version of Windows XP and update it to SP2.
6. Boot Camp Assistant (find it installed in /Applications/Utilities/ on Leopard).
Axel F.

TS1277 HI. I have followed all the appropriate steps above and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user

HI.
I am having trouble authorising my Mac Air to my Itunes account. I found a discussion explaining how to go go into 'Terminal', then adding a command. I have followed all those appropriate steps and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user. Can anybody offer any suggestions?? ta

Does the command that you're trying to enter in Terminal begin with the word 'sudo'?
If so, your keyboard is working fine. When you type your password after a sudo command, nothing is echoed to the screen for security reasons (not even the * that are normally registered in other user interfaces). However, the program is registering what you type.
Just type your password and press 'return' and the command will be executed (so long as you type it correctly; if you don't, you'll get an error message).

Kurzweil PC88 midi keyboard doesn't work!

Similar Messages

Maybe you are looking for