L193P drivers for windows 7 needed.

on CD that came with the monitor, no windows 7 drivers, just vista. There does NOT seem any driver for DVI (just analog) use.
Is there a separate windows 7 drivers?, where can I get DVI driver so I can take the most out of this beautiful monitor.
gychang

Hi:
You should be able to use the drivers and software from this model on yours...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6936...
When you go to install the graphics you have to install these drivers in this order and reboot after each installation.
1. Intel chipset installation utility.
2. Intel HD graphics driver.
3. Nvidia HD graphics driver.

Similar Messages

Satellite C660D-13Q - drivers for Windows XP needed

Hello
Got Toshiba Satellite C660D-13Q (PSC1YE).
In BIOS I've changed SATA Controler Mode from AHCI to Compatibility to make installation of Windows XP possible. In AHCI mode during installation I'm getting Blue Screen all the time.
(By the way - is it possible to install Win XP on SATA Controler Mode switched to AHCI?)
I've installed Windows XP SP3 and I need drivers, especially for Bluetooth - I tried file BT-stack-toshiba.zip (after unpacking: v80012T_20110809_x32.exe size: 38 786 027 bites) from Toshiba servers but it doesn't work.
I can find drivers only for Windows 7 (32 or 64bit) - why Toshiba doesn't support Windows XP - some applications and games still don't work on Windows 7 and I guess never will.
Is there any chipset/APU driver needed for this notebook as it is based on the new Fusion processor, which combine the CPU and GPU into a single processor architecture known as an APU (CPU AMD E-240 and GPU AMD HD 6310)?

>In AHCI mode during installation I'm getting Blue Screen all the time.
(By the way - is it possible to install Win XP on SATA Controler Mode switched to AHCI?)
Of course this is possible. This forum contains lot of threads about this theme.
I found also this Toshiba document:
+How to integrate a SATA AHCI driver in a Windows XP Setup CD+
http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm
It seems to be AMD A50M Chipset and the SATA (AHCI driver) should be part of the AMD Radeon HD 6250 Graphics chip (code AMD HUDSON M1)
However, I agree with user above: the Win XP is more or less past and Win 7 and in the next time Win 8 would be the OS which is supported.
>some applications and games still don't work on Windows 7 and I guess never will.
Therefore Win 7 supports the compatibility mode which allows to run the older software in the Win XP compatibility mode
<img src='http://img337.imageshack.us/img337/5483/captureknf.jpg' border='0'/>

Need MacBook Pro MD103LL/A Drivers for Windows 7, Need MacBook Pro MD103LL/A Drivers for Windows 7

Hi I have 15" MacBook Pro, Core i7 , NVidia 650 GT M.
I am installing windows 7 on it now I need its drivers. I am not using boot camp because its so slow and i have waited for 6 hrs but it didnt fully download the drivers so it bothered me and I just closed it .
Now is there someone who can refer me to some site where i can download Hardware Drivers for my MAC Book Pro Manually plzz?
I need it
I dont wanna use Boot Camp plz.

No, I am not using it virtually, Its installed saperately . Actually From BootCamp i just Installed Windows and unchecked other Driver and support downloading options because they were taking so much time to download the drivers. Now Windows 7 is installed. Now I again switched to MAC and tried to download the drivers from Boot Camp (Just the Drivers) so that i will write those drivers to My USB and will Install them after rebooting into Windows. But I spent 6 hours and couldnt download the drivers because boot camp took alot of time for downloading them. I just closed it. So thats y I am asking is there a way i can download drivers for my Hardware on by one manually from any website ?

Need BootCamp Drivers for Windows Vista!

Hi Guys, I lost my bootcamp installation disk for the Windows Drivers. I have OSX 10.6.3 and boot camp 3.0.2 on an imac G5 Intel duo. Please help me, I need drivers for Windows Vista . Thanks

have you looked on the bootcamp install list?
http://support.apple.com/downloads/#macoscomponents

I have i mac system, need all drivers for windows?

I have I Mac system and i installed windows vista ultimate edition, i require all drivers for windows vista

It is installed (I installed Windows....)
Everything you need to know was in Boot Camp Assistant, the drivers are on OS X DVD (while in Windows)
HERE:
http://www.apple.com/support/bootcamp has FAQ How To Manual articles and updates for AFTER yu have Boot Camp 3.0 installed
If you bother to read the instructions first would save you and us a lot of repeating.
You also want Microsoft Security Essentials Vista SP2+ (Windows 7 64-bit would be better and supported) and make sure you have about 15-20GB free space on Windows. All the updates will eat up 10GB of temp space, plus page and other items

Need Drivers for windows 10 x64

Hello, I need the proper drivers for windows 10 x64 for my probook 450 g1 laptop. I got the drivers from this page: http://us-support.external.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4192all the drivers are not present here like display, hot keys etc. So it will be very helpful to me if someone helps me to get those drivers. Thanks in advance.

From Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support please use Boot Camp Support Software 5.1.5640.
You can use Boot Camp: Install or repair Boot Camp drivers for Repair.

Re: HP 15-d053sr drivers for Windows 7 x64 not installed

Hello!
I have the same problem!!!
Notebook HP 15-d053sr, Product No. F7R72EA#ACB, Serial No. [edited by Moderator], Bios Version F.11
On clean install Windows 7 x64, Can't install all Chipsets, USB 3.0 and Video drivers! Error message: "This computer does not meet the minimum requirements for installing the software"
On clean install Windows 8.1 x64 Can't install "IMEI" (sp64344) driver and maybe more!
HP Support Assistant find only 4 drivers (Atheros Bluetooth, Wireless LAN, Synaptics TouchPad and Realtek Audio drivers)...
Need working, supported, compatible drivers for Windows 7 x64!
Please HELP!!!

Hi @Ainars_LV ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

HP Laserjet 1010 drivers for windows 8

Hi sir,
I have printer hp laserjet 1010 i need drivers for windows 8 please help me i can't find that drivers in hp website.
Regards,
Ali

Hi Ali,
I am sorry to inform you, the printer is not supported on Windows 8.
You may find this information listed below:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Drivers for Windows Vista 64-bit on Satellite L300-1AM

When I can get drivers for Windows Vista 64-bit? Or I need to intall 32-bit drivers on my 64-bit Vista operating system?
Please links ;)

[Toshiba - Download Drivers|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
In the Drivers Search Page (the link above) select these filters:
_Product type:_ +Notebook+
_Family:_ +Satellite+
_Product Series:_ +Satellite A Series+ (don't try the L series if you want to find anything useful)
_Operating System:_ +Windows Vista 64 Bit+
_Country:_ +World Wide+ (you have to select this in order to get rid of those multiple country options available for the modem)
_Language:_ +English+ (obviously)
Don't modify any other filter. The results will be about 100 (maybe more, but the site is set to show up to 100 results).
Advices:
1. Download the latest versions only (there's no point in downloading multiple versions of the same driver, yet they will be shown in the search results area)
2. Download what's specific to your laptop only (network - RealTek, both wired and wireless; chipset and graphics - Intel; modem - Toshiba; webcam - Chicony; there's no point in downloading anything from otehr vendors - except maybe the touchpad, but Windows can handle it properly without aditional drivers)
3. Don't download any BIOS or Firmware file; they might not be for your notebook, and installing the wrong ones is a sure path to screwing up your notebook (and losing the warranty); if you need them upgraded, go to the download page for your specific model, Windows XP or Windows Vista 32 Bit drivers (since they are OS independent anyway)
Toshiba utilities (DVD Player, ConfigFree, etc.) should be OK too (again, download the latest version only).
BTW, I own 2 Toshiba notebooks (L300-1AM and L300-1AN; quite similar, the differences are in HDD and CPU only) and I had the same problem: no 64-bit drivers (and the same "support"). Quite strange the idea that Toshiba is testing these 64-bit drivers before releasing them (according to a previous post), since the same drivers, for the very same chipsets - but installed on other models - are available. Windows Vista 64-bit is out on the market for nearly 2 years now, the production of these models has already been stopped (and I assume they have not been produced during one night only :) ), yet they had no time to test the drivers... High-class support from Toshiba!

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

How do I download 32bit Drivers for Windows 7 on Bootcamp for OSX 10.8.1?

Here is the deal,
I am a computer technician for a library and I am installing Windows 7 on four brand new Apple MiniMacs with OSX 10.8.1 on them (don't ask). The Mac came with no install Disks and the Bootcamp Assistant only downloads 64bit drivers for windows. I am installing Windows 7 32bit on them and I need the drivers. How can I get them? Can somebody assist me please?

Jpac-Parks wrote:
I have machine shop tools and irreplaceable software that only run 32 bit and I really have a serious need for 32 bit windows support. I feel Maverics should support these old 32 bit tools.
Buy a Windows machine or an older Mac if you wish to use 32bit Windows. (what are you going to do when MS quit supporting 32bit systems?)

Unable to install Boot Camp Drivers for Windows

Mac Pro (2) 3.2 Xeon quads
Mac OS 10.5.2
Boot Camp side - Windows XP pro x64 w/SP2
Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
Maybe the XP pro x64 is not compatible?
Barry in St. Louis

I did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
When trying to install boot camp drivers, a message came up saying:
Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help??

Problem with drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA)

Hello
Please help to find drivers for Windows 7 for Ноутбук HP Envy 17-k152nr (K1X63EA) for:
1) ACPI\HPQ6007
2) USB\VID_138A&PID_0050&REV_0060
It is detected as "unknown devices"

Hi:
You need these drivers...
ACPI\HPQ6007:
HP 3D DriveGuard Software
File name: sp67280.exe
USB\VID_138A&PID_0050:
Validity Fingerprint Sensor Driver
File name: sp66110.exe

U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

so i did a fresh instal of windows xp pro sp3.
device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
LAN shows up. and so does the 1394 on the network connections, but no wireless.
(note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
however i cant seem to find a way to get the wireless to work.
Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
please help, totally lost.

Your "yellow" device is Bluetooth, not WiFi.
Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
//help will save the world

Graphics drivers for windows 7 compatible with hp notebook pc 500

iplz recommend me graphics drivers for windows 7 compatible with hp notebook pc 500

Hi:
Download and run this driver. You will probably get an unsupported operating system error.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=447304&swItemId=ob_47264_1&swEnvOid=2096
Close out of any error windows.
Go to the device manager and click on the video controller needing drivers.
Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp34749.
Make sure the Include Subfolders box is checked and the driver should install.
Reboot and your graphics should be working normally.
You will not have Windows aero because the Intel GMA 900 graphics adapter is not 100% Vista or W7 capable but at least you will be able to change the screen resolution and have graphics acceleration enabled.

L193P drivers for windows 7 needed.

Similar Messages

Maybe you are looking for