LabVIEW Engineer wanted for job in Essex

Hi,
I am leaving my current position for a different one and I would like to try and find my own replacement. If you would be interested in a position based close to Chelmsford, please let me know on 07792613677.
Many thanks, Alec

Hi Alec,
Your organisation sponsor visa for non-local residents?

Similar Messages

Labview engineer looking for job in china

I am a labview engineer for more than one year in philips lighting (shanghai china).Working on labview7 and RS232,GPIB interface instruments.Now I looking for a job in shanghai china.
more detail please contact [email protected]

Hi Alec,
Your organisation sponsor visa for non-local residents?

LabVIEW Engineer looking for job

I have attached my resume to review.
Attachments:
Resume.pdf ‏50 KB

Dear Sir / Madam,
I am an experienced engineering professional skilled in Post Silicon Validation by Automating using LabVIEW, Power Measurements, Jitter Measurement & Analysis, Audio Characterizations, Silicon Validation Test Cases, Multi-Channel Data acquisition and Triggering using NI DAQ Cards, Control Systems, Serial Communications using VISA and Serial I/O Interface, Code Native Interfaces, Call Library functions to interface with third party and custom dlls, ATMEL and PIC Micro Controller programming, Temperature Controllers like Honeywell, ESPEC-641, TestEquity 115, Hand held terminal programming to drive servo motors, C/C++/VB Programming for developing embedded applications.
Good experience on Windows API, protocol implementations, ARM11 & ARM7TDMI on-chip programming using Register Map and Pinout Specs using C/C++ Metrowerks Code Warrior and MULTI-ICE for ARM Debugger.
Looking for L1/H1 Job
Thank you for your time and consideration.
Please find an attachment of my resume in MS-Word format.
Sincerely yours,
K.Sowjanya. B.Tech
Message Edited by Support on 04-04-2008 08:39 AM

Experienced LabVIEW Engineer looks for part time projects

Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).

Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available.

Electrical Engineer looking for Job

ARCHANA BHALERAO
1025 University Avenue # 128, Sacramento, CA 95825. Phone No: 916-752-4429,
Email: [email protected]
CAREER OBJECTIVE
Seeking a position as Project Engineer where I can apply my hardware, and instrumentation knowledge and LabVIEW programming skills to challenging projects.
EDUCATION
Master of Science in Electrical and Electronic Engineering, California State University, Sacramento. (2004)
Bachelor of Science in Instrumentation Engineering, Pune University, India. (2000)
QUALIFICATIONS
* Hardware: PC-based instrumentation, GPIB, PXI and serial instrumentation, sensors, and signal wiring Analog/ Digital circuit design, testing, and troubleshooting Microcontroller-based Systems design, interface and programming
* Systems: Data Acquisition, Motion Control, Machine Vision and Image Analysis, Industrial Automation, SCADA Systems.
* Software Tools used: LabVIEW, TestStand, MATLAB, SIMULINK, ORCAD CAPTURE, and MS-Office.
CAREER EXPERIENCE
Research Assistant â Engineering and Computer Science Department, CSUS 2002âPresent
* LabVIEW Programming for Industrial Projects.
* Analog and Digital Circuits.
* Microcontroller-Based Systems.
* Motion Control and Vision Analysis.
Customer Support Engineer â Theta Controls, India (Alliance Member âNI, USA) 2001â2002
* System Design for Data Acquisition using LabVIEW.
* Providing technical support to customers.
Graduate Engineer (Maintenance Department) â Gabriel India Ltd, India. 2000â2001
* Preventive Maintenance and Automation Projects.
INDUSTRIAL PROJECTS:
PC Based System to Measure Surface Tension of a Liquid using Pendant Drop Method
* Use LabVIEW to control the motion of a Syringe connected to a Stepper Motor and Motion Controller Card.
* Use IMAQ Vision with LabVIEW to extract the x and y coordinates of a shape of a bubble.
* Develop a DLL to compile a code in C language and use it with LabVIEW.
UV Detector Project â Reflect Scientific, CA
* Interface signals from two photodiodes to a 12-bit A/D converter, interface keypad, LCD, A/D and a D/A converter to a microcontroller to read percent transmittance of a liquid passing through a liquid chromatograph.
* Develop an Application Program to calculate absorbance of a chemical using Beers Law.
* Develop a Datalogger using LabVIEW to log data from 3 channels of the UV Detector.
Microcontroller Based Prosthetic Arm Monitoring Device â Shriners Hospitals for Children, CA
* Interface signals from a force sensing resistor, electric motor and EMG sensors to a microcontroller to log the data related to usage of a prosthetic arm by a disabled child.
* Design the signal conditioning circuitry, and develop an Application Program.
PAPER PRESENTATIONS
* Microcontroller Based Prosthetic Arm Monitoring Device â Winner at the 18th Annual California State University Student Research Competition.
* Optical Fiber Amplifiers
* Mobile Intel Pentium M Processor
RELEVANT GRADUATE / UNDERGRADUATE COURSEWORK
Machine Vision, Advanced Robot Control, Artificial Intelligence, Process Control and Instrumentation, Micro Computer System Design, Advanced Digital Signal Processing, Fiber Optic Communication, Biomedical Instrumentation
PERSONAL SKILLS
Excellent written and verbal communication skills, quick learner, self motivated and positive attitude, demonstrated leadership skills, ability to work with a team as well as independently, experience in interacting with customers, experience in making technical presentations.

Hello Archana,
If you are now in India, you could write to me with your CV.
We are recruiting LV skills. My email id is [email protected]
If you are based elsewhere, check http://www.calbay.com/index.htm
I read that they are recruiting.
Another good option could be simply to goto google and search with "LabVIEW job" and such other combinations.
Goodluck!
- Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Experienced Labview Realtime Engineer wanted. Must be UK.

I am looking for an experienced Labview/ teststand engineer to develop software for our automated hydraulic test equipment. Please ask for job description. Must be able to work in UK.

I am going finish my M.Sc here in Sweden. I can work for you if you consider me as an option. I don't have any working visa in UK. I am basically from India.

CLAD Certified LabVIEW developer with 6 months exp seeking for Job in LabVIEW/Embedded

Hi,
I am currently working at CC Engineers Pvt. Ltd. as a software developer in LabVIEW and seeking for a job change. Please find the skillset, project  and certification information below.
Academics:
B.E. Electronics with 70.90% on degree.
Objective: To make use of the knowledge acquired by interest, skill and education for the personal growth of the organization in development of various applications in LabVIEW. Summary of Skills:
● Good knowledge of NI LabVIEW with CLAD certification● Good knowledge of C programming● Basic knowledge of SQL, PL/SQL, RDBMS concepts● Basic knowledge of Linux, Macintosh OS● Good knowledge of Windows 98/XP/Vista● Good knowledge of Computers, Hardware, Latest Technologies Certifications:
● Certified LabVIEW Associate Developer (CLAD), National Instruments. ● NI LabVIEW from YCCE college, Nagpur. ● Oracle9i from Concourse, Nagpur. ● Programming excellence through C from Kanetkar’s Institute of Computing &      Information Technology(KICIT) Pvt. Ltd, Nagpur. Work Experience:
Currently working at CC Engineers Pvt. Ltd, Pune as a software developer in LabVIEW from past 6 months.     Projects Undertaken :
● Railway Braking System Fault Trainer using NI LabVIEW 8.5:Company: C.C. Engineers Pvt. Ltd.Description:An invaluable aid in the effective understanding and troubleshooting of the faults associated with Railway Coach Air Braking System. The fault trainer has a teacher panel that can be kept out of student control. The teacher can create faults using this panel. The student panel has an array of buttons necessary to monitor various system parameters respectively. The student then has to follow laid down fault finding procedure and locate the fault. ● DIESEL ENGINE TRAINER using NI LabVIEW 8.5:    Company: C. C. Engineers Pvt. Ltd.     Description:     Diesel Engine Trainer is process of testing faulty Loco. The main goal of our        project was to simulate faults occurring in Diesel engine for railway trainees.      Software was divided into two parts Teacher and Student. Teacher selects      fault and student finds out particular cause of fault. Student finds fault using      Symptom, Input Description and remedial action. Input Description is      accessed from hardware having 32 buttons using RS232 communication. Two       Monitors divided by NVIDIA Graphics card were used. ●   Simulated Data Acquisition and Device control using NI LabVIEW 7.1:Description: Input was taken as temperature through a thermocouple from DAQ device. The LabVIEW code would accept this input and record its average value along with the values of voltage and current, over given time in a text file. If the temperature exceeded a fixed threshold value, the DAQ would send an output signal through one of its configured ports which would control a bulb through a relay. This LabVIEW Code could also be controlled remotely through internet, or on a Local Area Network. If my skillset match any open positions, please mail me to [email protected]
Thanks a lot!
-FraggerFox!
Certified LabVIEW Architect, Certified TestStand Developer
"What you think today is what you live tomorrow"

Dearest Friend,I AM most interested in this position. PLEASE forward, to, me the (MAIL ID) ID for which I send the RUSME for this position and attacha lll conntact detailes available at this time. We are requiiring you prom,t and cisrterous replies to this topic . Many Greatful Thanks to you and all,Sajib Nowdhury

I want a job for apple in which I design the actual iPods, iPhones, iPads, and iMacs. What is this called? I do not necessarily want to do any internal stuff. I would like to design the actual device and help build it. I want to give ideas for the devices

I would love a job where I can help make the blueprints of how I devices will be made. I want a job where I can more so help plan the creating of every new device rather than building the already planned devices.

There is no simple job description or position that would fit. The jobs of design are generally split among many people and roles. You might try viewing the existing jobs; that might give you some clues as to avenues of education and job experience to pursue. Viewing the Design jobs might give you at least a start:
https://jobs.apple.com/us/search?#function&t=0&sb=req_open_dt&so=1&j=DES&lo=0*US A&pN=1
Regards.

LabView "Guru" needed for the summer (4 month project) Kalamazoo, MI

LabView "Guru" needed for the summer (4 month project)
I am looking to hire a LabView "Guru" for a summer project in Kalamazoo, MI that will last 4 months. Specifically, the ideal person will have the following:
LabView expert with a minimum of 7-15 years of experience working with LabView (currently using version 6.1).
80% of the job will be dissecting and interpreting mature LabView code and then re-engineering it to be used for testing.
Printed Circuit Board experience a plus.
4 year degree (BSEE preferred, but expertise in LabView takes priority over degree)
The pay will be $60/hr and you can plan on overtime of at least 10 hrs each week that will be paid at $90/hr.
Please call 616-855-4600 if you need more information and email a "word" copy of your resume to [email protected]

Sounds like Parker-Abex (LabVIEW 6.1 part)
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Serial Labview VI's for contorlling a Yaskawa SMC-4040?

Hello All!
Just wondering if any has or knows where there might be any Labview VI's for a Yaskawa SMC-4040 controller using the serial port?
Thanks,
Greg Newsome
Test Engineer

Greg--
      I just want to verify, this motion device doesn't need a controller. It is essentially a stand-alone instrument where you'll just send commands for whatever motion you need it to preform. Is this correct?
      If so, the driver that will allow you to send commands to your ports is NI-VISA. I think what you are looking for, or the best option, would be if there is an "Instument Driver" for this device. Instrument drivers are packages of all the commands you would send using VISA. I've looked and cannot see one on our website. If we do not have it, your best bet is to contact the manufacturer and see if they have anything.
      If you cannot find an instrument driver, you will still be able to communicate to the instrument manually using the VISA VI's and the command set for your instrument. The best way to see how to do this is to open an example from the NI Example Finder in LabVIEW. Go to "Help>>Find Examples" then Navigate to "Hardware Input and Output>>Serial" folder. I would suggest looking at the code for "Basic Serial Write and Read". If you have any questions let me know.
Regards,
John H
Applications Engineer
National Instruments

LabVIEW Programmer Wanted

Project using Labview as a supervisory control system to interface with an OMRON PLC.
Project is in the New York City Area
Send resume [email protected]

Good Evening,
You may get more responses if you post this on the Jobs, thread, rather than the thread where folks post that they are looking for jobs. Those that are advertising that they are available may not look back in this thread after they post.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

ANY LABVIEW ENGINEER OPENING AT BANGALORE,,,???

Hi
     I'm ramesh babu, Completed my Masters in Electronics & Instrumentation from Madurai Kamaraj University.
     I have expertise knowledge in following domain :-
     LabVIEW-2010
     NI DAQ- 6251, 6014
     NI Elvis
     Sensors and Interfacing
     Hardware interfacing such as parallel & serial port
     PLC - siemens S7200
     OPC server - siemens pc access
      if you have any openings please call me @ - +91-9739269920

Ramesh, this is the thread where companys with jobs post them, so most of those looking at this thread are looking for jobs, not looking for applicants. There is a thread for apllicants looking to be hired, which is where this posting would be more appropriate.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Charting data from text file in LabVIEW 5.1 for Windows

I am having some difficulties trying to figure out how to plot a chart with
data from a file. I would like to be able to read data from a text file
into a chart using LabVIEW 5.1 for Windows. I have looked in the help
within the program and online. I have also looked in the user manual and
the book "LabVIEW for Everyone". Could you please give me specific
instructions on how I would construct the program to be able to do this.
Thank you.

Hi Ellie,
It depends on how data is stored in that txt file. Usually you load the data into an array either using or , the array if necessary and send it to the graph indicator in required form. If you want a more detailed answer, send me a sample data file ([email protected]).

Error in creating IO file handles for job (number 3152513)

Hi All -
I am using Tidal 5.3.1.307. And the Windows agent that is running these jobs is at 3.0.2.05.
Basically the error in the subject was received when starting a particular job once it was cancelled and a couple of other different jobs a few days before. These jobs have run successfully in the past.
This particular job was running for 500+ minutes when it should run at an estimated 40 minutes. At that time it would not allow for a re-start of the job, it just stayed in a launched status.
Trying to figure out what causes this error.
Error in creating IO file handles for job 3152513
Note - from that being said we were to see 2 instances of this process running at the same time, we noticed some blocking on the DB side of things.
Trying to figure out if this is a known tidal issue or a coding issue or both.
Another side note, after cancelling the 2nd rerun attempt the following error was encountered: Error activating job, Duplicate.
When we did receive the Error creating IO file, the job did actually restart, but Tidal actually lost hooks into it and the query was still running as an orphan on the db server.
Thanks All!

The server to reboot is the agent server. You can try stopping the agent and then manually deleting the file. That may work. When the agent is running the agent process may keep the file locked, so rebooting may not be sufficient.
The numerical folders are found as sub-directories off of the services directory I mentioned. I think the numbers correspond to the job type, so one number corresponds to standard jobs, another to FTP jobs. I'd just look in the numbered directories until you find a filename matching the job number.
The extensions don't really matter since you will want to delete all files that match your job number. There should only be one or two files that you need to delete and they should all be in the same numbered sub-directory.
As to the root cause of the problem, I can't really say since it doesn't happen very often. My recollection is that it is either caused by a job blowing up spectacularly (e.g. a memory leak in the program being launched by Tidal) or someone doing something atypical with the client.

How to find out what are the interfaces used for Job and Job Codes

HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
Sunny

Hi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya

LabVIEW Engineer wanted for job in Essex

Similar Messages

Maybe you are looking for