LabView for Response Spectra Generation

I am searching for someone who has used LabView to develop response spectra
(also known as shock spectra) plots from DAQ using NI board. I have a fortran
executable response spectra program, but do not know how to execute it within
the LabView environment. Any assistance would be greatly appreciated. I'm
desperate!

Well,in fact I do have a Sound and Vibration Add-on in my labview. My plugin version is May 2003 Edition and I can´t seem to find any SRS VI, the attached file is a picture of my SVT Palette. Could you try to point me which SVT palette this SRS VI is supposed to be located in?
Attachments:
svtpalette.JPG ‏16 KB

Similar Messages

Can I target the STM32 Primer2 hardware with LabVIEW for ARM

The STM32 Primer2 hardware looks very cool. Can LabVIEW for Arm target this hardware? From looking at the list of ARM devices supported by LabVIEW, this would appears to be a Tier 2 device (ARM Cortex-M3) with no support for TCP/IP or IO.
Can anyone tell me the feasibility or effort required to get TCP/IP, IO, and maybe even display support for this device?
Message Edited by Jim Kring on 09-11-2009 10:46 AM

Have you ever said something you wish you could take back after having time to reflect upon it? Another forum I like, http://newsbusters.org lets the author edit his posts for a short time. Maybe NI could to that and I would not be pulling out my foot so often.
Well, perhaps I was a bit more "colorful" than I meant to be. Frustration does that to me sometimes. Still the idea of a strong rope covered with disgusting risks does get the point across magnificently. I just wish I had saved it for something more suitable.
Let me think back to some of the problems I've had in which I've lost hours trying to figure out...
1. Can't use the Wait ms function. It halts the program. Express wait works fine. It was sprinkled throughout which made it hard to isolate.
2. Some sub VIs don't run unless they are checked as inline code. I don't yet understand why.
3. At the beginning of my main vi there was a small cluster in which I filled the data from an SD card file. I used a constant of the cluster on the input of the Bundle function, but because my program and variable sizes were near the max I changed a number of variable representations to save memory. ...But I didn't replace the constant. The program started exhibiting really strange behaviors. I couldn't even get a simple state machine to run. I was reduced to commenting out (disable structure) sections to find the problem before noticing the coercion dot on the input to the bundle (The dot against the red string color doesn't stand out very strongly which is why I missed it). Apparently it overwrote memory since the older cluster was significantly larger than the new.
4. Spent a lot of time trying to get the SD card to work with SPI functions. Even though I read that 2009 supported SD card file services I didn't intuitively understand how to wire up since the Open/Create/Replace function has a ref num output which actually connects to the file(use dialog) input of the read and write functions.
5. Had a problem with breakpoints and probes not working. That apparently was caused by item #3.
6. Typo bug in the Arm_irq.c file LM3Sxxxx_GPIOCAHandlerP to LM3Sxxxx_GPIOCHandlerP
Some of these are of the rope variety. A few are actual bugs. All probably could have been solved in moments had I a local guru. Anyway, I've spent hours and my hands hurt. I hope to have this little project working on the LM3s8962 today and after some hardware changes will port it over to the Primer2... Hopefully...
This forum has been a real help... especially your quick responses.
regards to all,
David

Provide me the solution for proforma invoice generation in SAP SD.

Dear experts,
My issue is of invoicing, proforma invoice, F5 or F8 (either order related or delivery related) in intracompany stock transport order, there will be no billing document generation for the reason that invoice list date cannot be determined. Why? & what needs to be done for creating/raising the proforma invoice.
With regards,
M.S.Kumar.

Please dont post the same question multiple times. You have already posted a similar question and wait for response.
thanks
G. Lakshmipathi

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008.

I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008. I have selected system target file as nidll.tlc,make command as make_rtw and template nidll_vs.tmf. When I try to generate .dll file I get the following error.
Attachments:
SITProblem.JPG ‏101 KB

Hi,
No . I could not solve the issue. Presently we are using microautobox (from Dspace)for doing the RCP.
Himadri

LabVIEW for ARM 2009 Read from text file bug

Hello,
If you use the read from text file vi for reading text files from a sdcard there is a bug when you select the option "read lines"
you cannot select how many lines you want to read, it always reads the whole file, which cause a memory fault if you read big files!
I fixed this in the code (but the software doesn't recognize a EOF anymore..) in CCGByteStreamFileSupport.c
at row 709 the memory is allocated but it tries to allocate to much (since u only want to read lines).
looking at the codes it looks like it supposed to allocated 256 for a string:
Boolean bReadEntireLine = (linemode && (cnt == 0));
if(bReadEntireLine && !cnt) {
  cnt = BUFINCR;    //BUFINCR=256
but cnt is never false since if you select read lines this is the size of the file!
the variable linemode is also the size of the file.. STRANGE!
my solution:
Boolean bReadEntireLine = (linemode && (cnt > 0)); // ==
if(bReadEntireLine) {    //if(bReadEntireLine && !cnt) {
  cnt = BUFINCR;
and now the read line option does work, and reads one line until he sees CR or LF or if the count of 256 is done.
maybe the code is good but the data link of the vi's to the variables may be not, (cnt and linemode are the size of the file!)
count should be the number of lines, like chars in char mode.
linemode should be 0 or 1.
Hope someone can fix this in the new version!
greets,
Wouter
Wouter.
"LabVIEW for ARM guru and bug destroyer"

I have another solution, the EOF works with this one.
the cnt is the bytes that are not read yet, so the first time it tries to read (and allocate 4 MB).
you only want to say that if it's in line mode and cnt > 256 (BUFINCR) cnt = BUFINCR
the next time cnt is the value of the bytes that are not read yet, so the old value minus the line (until CR LF) or if cnt (256) is reached.
with this solution the program does not try to allocate the whole file but for the max of 256.
in CCGByteStreamFileSupprt.c row 705
if(linemode && (cnt>BUFINCR)){
cnt = BUFINCR;
don't use the count input when using the vi in line mode. count does not make sense, cnt will be the total file size. also the output will be an array.
linemode seems to be the value of the file size but I checked this and it is just 0 or 1, so this is good
update: damn it doesn't work!
Wouter.
"LabVIEW for ARM guru and bug destroyer"

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

Request timed out while waiting for response!!

Hi All,
My scenario is PROXY to SOAP. I am getting below error while posting to WEBSERVICE.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">Failed to deliver inbound WS message, code=503 and reason=Request timed out while waiting for response. at com.sonicsw.net.http.ws.WSHttpProtocolHandler$HttpInBrokerHandler.invoke(WSHttpProtocolHandler.java:833) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453) at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.sendToSOAPStack(WSHttpProtocolHandler.java:630) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.dispatch(WSHttpProtocolHandler.java:537) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.servicePost(WSHttpProtocolHandler.java:284) at com.sonicsw.net.http.ws.WSHttpProtocolHandler.service(WSHttpProtocolHandler.java:609) at com.sonicsw.net.http.HttpProtocolHandler.handle(HttpProtocolHandler.java:471) at progress.message.net.http.server.HttpConnectionHandler.handle(HttpConnectionHandler.java:170) at progress.message.net.https.server.SonicHttpsConnection.service(SonicHttpsConnection.java:156) at org.mortbay.http.HttpConnection.handleNext(HttpConnection.java:981) at org.mortbay.http.HttpConnection.handle(HttpConnection.java:831) at progress.message.net.https.server.SonicHttpsServer.handleConnection(SonicHttpsServer.java:449) at progress.message.net.https.server.SonicHttpsServer.handle(SonicHttpsServer.java:364) at org.mortbay.util.ThreadPool$PoolThread.run(ThreadPool.java:534)</ns1:stackTrace>
Any Idea ? Do I need to change anything in my SOAP Channel or BAsis should change the Time Parameter?
Thanks,
Pushkar Patel

Hi,
>>>>>>>Request timed out while waiting for response.
See the below link, it might be helpful to you for timed out issue.
[Link1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?quicklink=index&overridelayout=true]
Regards,
Rajesh

Error while invoking bean "delivery": Waiting for response has timed out.

Hello,
I am running a process that currently catches an exception from a partnerlink. When the exception is caught I send an email and the process exits. When I submit a request from the BPEL console, I have to wait until the JTA timeout before the page returns. However, the instance completes successfully and I receive the email before the timeout happens. This is what I see in the logs. When I look at the audit and activity flow, all of the activities were timestamped prior to the exception being thrown. Has anyone seen this behavior or know what is going on. Is there a problem sending email in a catch or catchAll block?
<2009-04-19 22:33:41,859> <ERROR> <iCareTest.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "delivery": Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
Thanks in advance
Jim

There is no issue the reason why it times out is because you don't have a reply back to the client in your catch all.
If you look at your process you will see that the defaul reply is in the main scope. When the catch all is invoked this reply is by passed, therefore no reply is sent.
PLease a reply in your catch all back to the client and it will work.
cheers
James

Hi like to check where to replace the free iPod nano for the 1st generation ipod

Hi
Like to check where can I replace the free iPod for my 1st generation iPod which can be found in your website. My email address [email protected]
Thank
Steven

Your local Apple Store, MacMall and do a Google search.

Ios 3.1.1 will not download for the 1st generation ipod touch

Why won't ios 3.1.1 download for the 1st generation ipod touch? It will start and then a second later stop.

Does it happen with the apps that came with the iPod?
Does it happen with all apps you have downloaded/installed?
Have you ried deleting the apps and redownload/install the apps? You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
Next would be to restore from backup
Last would be to restore to factory defaults/new iPod.

How do you get apps for the 1st generation iPod touch

How do I get apps for the 1st generation iPod touch?

By updating the iOS on the iPOd. The 1G can go as high as 3.1.3. That works with a lot of apps. But some apps require a higher iOS and/or newer iPod.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

How do I update the iOS for my 1st generation iTouch?

I am having difficulty updating the iOS for my 1st generation iPod touch. It is currently at 3.1.3. Can anybody tell me if this is possible?

A 1G iPod Touch cannot be upgraded past iOS 3.1.3. Sorry.
B-rock

Best practice for responsive projects

Does anyone have tips on best practices for responsive project?
I understand that 3 different layouts can be created. What happens if a learner is not using one of the 3 devices that were set up in a responsive project, and their screen size is different from any of those

Jay,
Dr. Pooja Jaisingh offered very valuable tips for good practice in responsive design last week in her webinar. 'Do's and Don'ts of creating Responsive Projects with Captivate 8'. I don't see the recording yet On Demand, but keep an eye on it.
Did you test a responsive project with F11 (Preview in Browser)? You will be able to change the resolution of the browser window and see that the content, if well designed (you can have absolute positioning, size as well) will move, shrink to adapt. The break points (3 devices) allow you to make more invasive changes at those points: dragging some objects out of the stage in the scratch area because they take up too much space for phones is one example. Or replacing a big screenshot with many details by a zoomed in detail screenshot for the mobile breakpoint. That is my way of explaining, responsive is not just have the three layouts for devices, it is also adapting between those breakpoints.

"Use presets for responsive layout" not working in Chrome

I am building a responsive website. I am going to have parts of the website animated using Edge Animate. I will make the animation and then insert it into a div in the responsive website I am building.
The Adobe Edge animation has a width of 100%, so that it resizes according to the area that it occupies the full width of the div no matter how wide that div may be in px.
It is all working fine, but:
I have an image in the Edge animation that is center aligned. It must stay center aligned no matter what width the animation ends up being.
Within Adobe Edge, in Properties, in Position and Size, there is a option where, if you hover your mouse cursor over the top right button a tool tip says "Use presets for responsive layout"
With the image on the stage selected, I can click on the "Use presets for responsive layout" button and then choose "Centre background Image".
It works perfectly in all browsers accept Chrome (even IE is playing ball this time). In chrome the width of the image stretches out as the div stretches out..
The "Centre background Image" setting says that it won't scale the image. But in Chrome it does.
What can I do to "tell" Edge Animate to center the image but not scale it in the Chrome browser?
I can see that in the image properties it is set to Background image x axis and y axis 50%. And the width is set to pixels. But in Chrome, the image stretches.
If you go to http://www.brainstormadvertising.co.uk/demo/services.html you will see what I mean. The circle image is centering BUT stretching in chrome browsers while centering nicely and NOT stretching in other browsers.

Thank you for your reply Josh. But the point of this setting in Edge Animate is that you can set it up that the background image is center aligned and does not scale. Yet it produces code that gives the width as 21.72%.
A little further along I see background-size: 48px; . This is correct.
So all the browers are reading background-size: 48px; as the scale measurement but Chrome is reading the width only, not the background-width. So this "Use presets for responsive layout" works in all browsers except chrome.
I don't know how to change that code after the artwork has been published. I can see the code using Firebug, but where do I change it in my code on my computer before uploading to the server?
I have reported this bug to Adobe.
Please see the attachment. You can see where all the settings are made and where I am getting a problem.

Font Smoothing in LabView for Linux

Hello,
I was wondering if anyone has been able to get their fonts in LabView for Linux to be either smoothed using Gnomes subpixel smoother for LCDs, or any other type of anti-aliasing. I currently can use truetype fonts in LabView, and for the most part they do look pretty decent.. btu they are not smoothed at all. Every single application I have loaded has smooth fonts other than LabView. Please let me know if anyone has managed to get this working... and if so, how.
I am currently using Gentoo with all of my packages updated less than a month ago, with LabView 8.2
Thanks for any info!

Unfortunately, we do not support fonts on your operating system. Hopefully another customer is more familiar with this.
Message Edited by Support on 10-04-2007 01:33 PM
Charlie M. CLD

LabView for Response Spectra Generation

Similar Messages

Maybe you are looking for