Language Installation of Sri lanka language Sinhalese, Sinhala

Dear Gurus,
We have requirement to perform Language installation for below three languages.
1) Bahasa , Indonesia
2) Sinhalese, Sri Lanka
3) Vietnamese, Viet Nam
I am able to find separate Language CD for "Vietnamese" but i am unable to find CDs for Bahasa or Sinhalese.
Does any one have any CD number or have performed language installation for these earlier can throw some light on same?
Warm Regards,
Shravan

In fact for base ECC6 there are separate medias for some 'extra' languages...
At least there is one for Vietnam.
I did not found the two others. At least you can find the lang. key in note
73606 - Supported Languages and Code Pages
Maybe you should open a message to support with comp. BC-I18
Regards

Similar Messages

  • Is the Oracle installer itself available in languages other than English?

    I know that Oracle can be configured to support multiple languages in the same database, but is the Oracle installation software itself (and/or corresponding documentation) available in other languages?

    Ah :-) MOS = My Oracle Support http://metalink.oracle.com (Oracle Support website)
    You will need a valid login to get access - a valid login is given when you purchase Support services from Oracle :-)
    The installer is available in several languages and it determines the language to run in automatically based on "locale" settings on the server where the installer is run.
    See http://www.oracle.com/technology/products/osp/htdocs/universal_installer_overview.html
    HTH
    Srini

  • Adobe reader multi language installer..

    Is there any adobe reader installer that supports all language?

    For Adobe Reader 11.0.0 all the msi and exe files for  Finnish, Dutch, Swedish are available in this location
    ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/
    But for the latest version of adobe reader 11.0.06, the installer for the languages such as Finnish, Dutch, Swedish are not availabe..
    So I want to know whether the current version supports for these languages? If so where can i get the installer files?

  • Multiple language installations

    Hi All,
    Does anyone have experience of knowledge of having multiple language installations of the same version i.e. both cs6 indesign.
    For example having English, French and ME installed, deactivating and activating according to need.
    Thanks
    Trevor

    Thanks Peter, I'll probably give that a go - not too exciting.

  • Multiple language installer for Adobe Reader

    I need a compressed multiple language installer for Adobe Reader to install with my software.  Is one available?

    When we requested a license to distribute the multi-language version of Adobe Reader with our software, we recieved the following link to a download:
    "For full installers: "
    "To download the English language version of Adobe Reader 9 with Acrobat.com in compressed .exe format, click here."
    When you click on the link, you get a single file (AdbeRdr11006_en_US.exe).  This is an installation for english only.  I am looking for a single .exe file for a multi-language installation. 
    The link you provided above is to a .zip file that must be extracted and then run.  This requires additional steps in our installation process.  We were hoping you have a single installation file to prevent these additional steps.

  • HI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean lan

    Daniel SterchiHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..
    forumnotifierHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..

    First of all, uninstall it with the uninstaller.
    Then:
    Install the ENGLISH version.
    Change the language in the CC app to Korean.
    Install the Korean version. (DON't uninstall the English version)
    Change back the langauge in the CC app to English.
    When your OS is running in English, InDesign will run in English with Korean functionality added, if your OS is running in Korean it will take the Korean User Interface, so let your OS run in English.
    Every installer language will add needed plugins for the work with that language. E.g. If I install Hebrew, I get RTL functionality in German version, only if I would change the OS language it would change the language of InDesign, InDesign takes always as UI language the language of the OS if available, if not (in your case you have uninstalled English before), it takes any version which is available in the order of languages specified in the OS.
    If you need to run your program in a different language than the OS but you have installed it in the language of the OS it becomes more difficult. You would have to use some system tools which are able to force a program to open with a different language. Most of those tools are freeware.

  • Change language installation

    how can i change the language installation of adobe premiere pro cs5.5?

    I don't think it can be changed.  You would probably need to uninstall and reinstall a different language version.

  • Dutch Language Installation

    Hi,
    We have a situation.
    Initially we had English language as default language installation. Later we had a requirement to have Dutch language.
    Our basis consultant did the necessary installtion.
    Post installation when we checked the initial logon screen shows dutch language, after loggin in the left hand side ribbon menu is blank.
    menu options are blank. Similar is the case with Admin
    what are we missing here?
    Inputs appreciated.
    Thanks.

    Hi ,
    Can you please go through the below notes.
    1611477 and also 1605394 for users with the same problem for other languages.
    Hopefully this should resolve your issue. thanks.
    Regards,
    Sanjeev

  • Mexico: Language Installation

    This might seem like a silly questions, but for those with Mexican companies, or operations in Mexico, what language did you install?  I installed Spanish and received a comment from the user in Mexico, who's helping me test, that the Spanish in Mexico is a different dialect than the Spanish language installation, and that for her, using English is easier. 
    There's not a Mexican version of the Spanish language that can be installed for SAP is there? 
    Thank you.
    ~TJ

    Well - especially for Spanish the differences can be pretty significant (e. g. see http://en.wikipedia.org/wiki/Spanish_dialects_and_varieties) across the world.
    Thats correct theres still a lot of dialects still widely spoken in Spain, The Spanish that is used as a standard and was inherit by people in the Americas (Mexico Included) is called "Castellano"...
    A bit more,
    http://en.wikipedia.org/wiki/Spanish_language
    http://en.wikipedia.org/wiki/List_of_countries_where_Spanish_is_an_official_language
    Saludos (Regards)
    Juan

  • Is language installation version dependent ?

    Is the language installation depends on the SAP version ie. if there is CD for installation of language into 4.6c system will it work on ECC 6.0 or for XI or 4.0. ?

    Hey,
    Every version of SAP system has it own localization language installation. for example, ECC6 might have some texts that
    4.6c doesn't have.
    Installation of ecc 6.0 will not work on XI 3.0 (sap will not release XI 4.0, instead they would release PI 7.0) due to the fact that most
    of the translation in ECC are not relavant in XI (for example, material number is not  an entity in XI).

  • Hungarian Language installation steps

    Please let me know, what are the steps to be taken to install the Hungarian Language in 46C environment in a non-Unicode environment?
    We are also planning to upgrade to ECC 6 and conversion to Unicode, How does this Hungarian Language installation will affect the upgrade to ECC 6 and conversion to Unicode?
    Your help will be highly appreciated
    -Al Mamun

    Hi Al,
    I assume you are having a System based on Latin-1 (Western European Code Page).
    In this case, SAP highly recommends to do the upgrade and the Unicode conversion BEFORE introducing Hungaria. Otherwise you have to switch the system to MDMP (because the Hungarian language is not included in the Latin-1 code page) and this causes significant additional effort during the Unicode conversion !
    Therefore the recommendation is:
    1) Upgrade and Unicode Conversion
    2) Installation of the Hungarian Language (which is then a standard installation according to the Language Installation Guide)
    Please also have a look at notes 79991 and 73606 for further information.
    Best regards,
    Nils Buerckel
    Solution Management
    Globalization Services
    SAP AG

  • Streamlining language installation of Tiger

    Hi,
    I am getting ready to upgrade to Tiger and would like to know if there is a way to bypass the non-english language portion of the installation. When I installed Panther it seems a lot of the install time was related to language installation. I'm not a xenophobe...I was just looking to streamline the installation.
    Thanks,
    Rick

    Hello Rick,
    I do not know of any way to stop the languages being installed - I am sure there is a way. One neat little Application that will remove the languages is here...
    Monolingual
    Also...
    Deleting all the unused printer drivers can release a considerable amount of space. I managed to " regain " around 2Gigs this way.
    Hope that helps some
    Regards
    Ian

  • French language installation error in SMLT

    Hi experts,
    Here i have got the requirement to install FRENCH language installation in ECC and SRM environment.
    My ECC system is ECC6.0 with EHP4/NW 7.01 and SRM is SRM 7.0/NW 7.01.
    I have installed the French language installation in my ECC sandbox to test it before do it in actual Environment .I am using SMLT to install French language installation in 000 client .while doing the installation one of the transport request (Request no 5) got failed  and rest of them are installed.
    I have setup the parameters in RZ10 for Installaed languages and second language to E restarted the server .
    Users are able to login with French language ,users are able to access FI functionalitybut when the MM configuration doing they are unable to see the values inF4 (help) MM03 and MM01 tcode.It gives all starts (****************) in F4
    I have raised oss message and working with SAP..
    In parallel i need to check is there anyone faced this type of situvation in your environment while installing French language.
    Please look at the logs for the TRansport request No5:
    The below error messages are in RED for Transport Request 5
    (SAPKLFRSR1EHP4ERP6F5).
    Language FR for FORM FVVD_ESRINVOICE in client 000 not imported, since
    orig. lang. is missing
    Language FR for FORM FVVD_ESRINVOICE in client 000 not imported, since
    orig. lang. is missing
    Language FR for STYLE ESRINV in client 000 not imported, since orig.
    lang. is missing
    Language FR for STYLE ESRINV in client 000 not imported, since orig.
    lang. is missing
    Object imported and activated
    Errors occurred during post-handling AFTER_IMP_STYLE for STYL L
    The errors affect the following components:
    BC-SRV-SCR (SAPscript)
    Please let me know your ideas on this.
    Thanks&Regards
    Janakiram
    SAP BASIS ADMIN
    Do NOT use UPPERCASE in the subject
    Edited by: Juan Reyes on Feb 8, 2011 11:24 AM

    Hello
    Please have a look at below points
    1. any language is imported first in 000
    2. for every language some text which is not translated has to be supplemented with Englisg or German
    3. there is periodic supplementaion if new support packs or notes appled in system in future
    4. once language is in 000 it has to be copied and supplemented in all oter clients
    5. Please see that all above steps have been taken care or not
    6. I suspect since users are able to login and work in system and only some characters are shown as * ,check supplementation part
    But this is my guess .
    Please see all language related notes
    Hope this helps
    Success!!

  • My app store wont change back to sri lanka from the u.s store

    Hi, I recently got my new ipod from sri lanka. I've been downloading apps and so on. One day i click on an app it says that this app is not available in sri lankan store would you like to switch us store [this is from the ipod not the pc] and i said yes. Now i cannot change back to sri lankan app store and it is stuck in the us store and cannot download any new apps. Please can someone tell me how to change back. I tried the way from the pc. settings>Itunes store>View my apple id> logged in> Change country/Region. its already on sri lanka, but from the ipod it says it is in the us store. I cannot change it since it says that no country is selected even though it is already selected in sri lanka and i cannot downloads app from the ipod, Please can someone teel me how to change it

    See:
    How to Change Your App Store Account Location | eHow.com
    Are you located in Sri Lanka and is your account associated with Sri Lanka? They have to be to use the Sri Lanka store.

  • How can i change the spelling language, (Separately from the computers language)

    I have tried changing the spelling to spanish but it still has the corrector for english. As i write sometimes english and sometimes spanish i want to know how to change the entire spelling language in my computer.

    Spelling language may be changed per application, not globally. First of all, deactivate automatic spelling, if you use more languages (I am not satisfied with this, perhaps because I also use custom keyboard layouts beside the default ones) in Sys Prefs/Language and Text.
    Then, choose spelling language per app, this is usually placed in Edit/spelling and grammar; Pages has it somewhere else, under TExt/More (right option), then spelling language down right. For examnple, my spelling options in Safari, when writing this text, are as attached:

Maybe you are looking for

  • Why is the second procedure in my package not working??

    Hi I have a package that I want to run every 15 minutes. When I try to run the procedures manually and each one seperately they work. But when I put together these procedures in a package, the second procedure does not work or not updating the table.

  • Photoshop Elements 3.0: Vorgabeotionen ändern

    Hallo! Ich bin begeisterter Photoshopbenutzer doch würde mich interessieren ob es denn möglich ist die Vorgabeoptionen beim Freistellen zu ändern. Freistellungsoptionen mit 5 x 3 Zoll oder so sind nämlich nicht sehr hilfreich. Grüße aus Wien Christia

  • IPhone won't charge, won't sync, won't do anything...

    My (1 month old) iPhone 3GS won't charge. Not via USB, or mains adapter. It just flashes up the "battery almost empty please charge me" icon even when plugged in. When plugged into the computer a message comes up "USB Over Current Notice. A USB devic

  • Printing Option from JList

    Hi All, I need a help on JList. I just want to print all contents of JList. Can anyone give me suggestion or any sample code on this?. JList may have maximum of 1000 Lines. I need to keep it in mind about line wrapping and multiple pages printing.

  • Can't play home videos made on ipod touch 4g  through apple tv 2

    The videos downloaded from itunes work, but I bought the apple tv so i could watch my personal videos made with the ipod touch 4g, 1 out of 10 tries it works after exiting the camera and going back in but it only allows one video to be watched.