Lappy wireless with iwl4965 issues .. yes another thread
Another thread in the tonne I searched up and completely failed to find a solution to my problem in. Wish I could remember the ancient email I signed up for the forums ages ago with too =[
Anyways... Problem: All activity drops in mere seconds upon first trying to connect to any site...
I have the driver installed fine, along with wicd which has control of my wlan0 like it should, the scan of SSIDs turns up fine, I can connect to my network fine too.
I can get an IP addy just fine, I can ping external IPs endlessly.
I can resolve IPs it seems, I tried pacman with wget to make sure my IPs were being resolved properly, it always connects and gets the first few tarballs, then on one of them the speed (as reported by wget) drops from full speed to 0 over a few seconds, and it never picks up again, and fails to retrieve any more files.
http sites are the same, it connects for a second, then is endlessly waiting.
Would love to get this working, and I should point out I have no problems at all with my ethernet connection.
Any ideas guys?
i use the same driver as you guys for my
Intel Corporation Wireless WiFi Link 5100
and "network manager" and have no problem whatsoever.
To get my wifi working i had to copy the
iwlwifi-4965-2.ucode
file into "/lib/firmware".
Try doing the same, might work
Similar Messages
-
Whine issue..yes another thread
Hello all. I have been reading about the whine issue and I have this. I know that some people say that they dont have it and good for you. I would like to know everyone who has had it what you do to get rid of it. I have done the mirror widget after I figured out the photobooth trick but whenever my computer goes to sleep and I open it back up the whine is back. We all know that some poeople may not have it or cant hear it thats great for them but for those of us that do have it I would like to know what you have done to cope with it.
Hello all. I have been reading about the whine issue
and I have this. I know that some people say that
they dont have it and good for you. I would like to
know everyone who has had it what you do to get rid
of it. I have done the mirror widget after I figured
out the photobooth trick but whenever my computer
goes to sleep and I open it back up the whine is
back. We all know that some poeople may not have it
or cant hear it thats great for them but for those of
us that do have it I would like to know what you have
done to cope with it.
Check my thread out:
http://discussions.apple.com/thread.jspa?threadID=434999&tstart=0
You need a logic board replacement if the Widget works to stop the noise.
William -
Adobe Freezing (Yes another thread).
Hi,
First off let me say I'm a Software Developer and that malarkey about temporary files causing Reader to freeze is a load of cobblers.
If I open Acrobat Reader on my home PC, work PC or laptop it freezes about 30-60 seconds after opening. It doesn't matter if I open a file from Windows Explorer, by clicking a link in IE or FireFox or even if I just open the Reader application itself from the Start Menu with no file loaded. The latter being a very obvious indicator this is not file related.
When it freezes, it freezes for about 30-60 seconds AND CPU usage stays between 02 and 10. This is not the pattern of an application creating or dealing with temporary files, especially seeing as there are none.
C:\>del acr*.tmp /s
Could Not Find C:\acr*.tmp
D:\>del acr*.tmp /s
Could Not Find D:\acr*.tmp
What I would like is a proper explanation or some ideas as to how I can prevent it. Ever since I installed Reader back in the 90's this has been an issue and I cannot believe a reputable software house can still be hauling such a ridiculous, annoying and very simple issue. I think you should aim to fix this bug instead of adding new 'features', you might claw back some of your users from the likes of Foxit.Hello all. I have been reading about the whine issue
and I have this. I know that some people say that
they dont have it and good for you. I would like to
know everyone who has had it what you do to get rid
of it. I have done the mirror widget after I figured
out the photobooth trick but whenever my computer
goes to sleep and I open it back up the whine is
back. We all know that some poeople may not have it
or cant hear it thats great for them but for those of
us that do have it I would like to know what you have
done to cope with it.
Check my thread out:
http://discussions.apple.com/thread.jspa?threadID=434999&tstart=0
You need a logic board replacement if the Widget works to stop the noise.
William -
Submit in Acrobat 9.4 Reader and Lotus Notes (Yes, Another Thread)
OK, I've browsed and searched, but have not found a thing like what is going on. We run V8.0 of Notes and have a form open in Acrobat 9.4.
I've tried clicking the submit button both inside our ISA server domain and directly attached to the outside modem.
From what I'n given to understand, a mail client windows is supposed to pop up when submit is clicked, but nothing at all happens.
The form is from another company who doesn't have anyone else with trouble using the form, so the issue isn't there.
I've swapped settings for about a week from tips on the forum here and still nada. Not even an error message pops up...the button "click animates" and then nothing at all happens.
I've even tried it on my own personal laptop using Thunderbird as the email client. Still nothing.
Am I just screwed?
Thanx!Sorry about that, frustration had set in. I'm using Reader 9.4 and so far as I know, the form is set to relay data only, not the pdf.
The security that I can see from properties is like this:
Allowed:
printing
content copying
content copying for accessability
fillling of form fields
Not Allowed:
document assembly
page extraction
commenting
signing
creation of template pages
If it only popped up an error message, there'd be something to grab hold of. -
WRT54G issue. (yes.another one.)
what does it mean when you're recieving way more packets than what is actually being sent?
i'm constantly getting knocked off.
i tried updating firmware..same results. any ideaS?On my PC it's currently:
Sent: 4, 558, 872
Received: 24, 798, 081
And my connection is ok. So it doesn't really matter much. I guess.
Anyway, back to your issue. In what way are connected to the router? Are you wired or wireless? -
My new time capsule will only allow me to extend my network via ethernet cable.
What I really want to do is use it wirelessly as an extension wirelessly.
The option is there (under other options in airport utility) but when I select it and move on it reverts back to create a new network.
Why is this?
Am I trying to achieve the impossible?
I have an airport express and that be added to my network wirelessly with no issue at all.
Please help
RussellCan I just "join" the network with my time capsule like I have with my airport express?
Apple does not present this option....but, even if they did.....this would be the worst possible option to use for backups.
Can I use my airport express as a base (connected via Ethernet to the router) for my time capsule to extend from wirelessly?
Yes, you can. The AirPort Express would be configured to "create a wireless network"......then.....the Time Capsule could be configured to "extend a wireless network".
It is critically important that the Time Capsule be located where it can receive a very strong wireless signal from the AirPort Express in this type of setup. The more that you have line-of-sight between the AirPort Express and Time Capsule, the better your network performance will be and the faster that backups will occur to the Time Capsule.
A better option in terms of performance would be to connect the Time Capsule to your current modem/router using an Ethernet connection and have the Time Capsule "create" the network. Then, use the Express to "extend" the network.
Here, I am assuming that you have a new Time Capsule. -
Spry Menu 2.0 issues in IE7.. yes another one!
I have CS4, and have used the widget browser to create a Spry Menu 2.0 and have imported it to my site. It displays fine in every browser except for IE7. I have been reading a LOT of threads on issues similiar to this one, so I'm prepared to tell everyone I know to upgrade to at least IE8!! However, I would like to fix it if possible. The menu bar is located in an include file and is attached to all my pages through the php function. I have made zero changes to the css code since I imported it into the site.
I also am wondering why there are two css pages for the menu bar.??
Any help would be appreciated..
One of the pages on the site is: michaelandrewshairstudio.com/offers.php
That page is: ( I have taken out some meta tags and content, but the div's are all still in place.) I also deleted some commented tags by accident when I imported it..
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Michael Andrews Hair Salon Offers</title>
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBar.css" rel="stylesheet" type="text/css" />
<link href="Spry-UI-1.7/css/Menu/basic/SpryMenuBasic.css" rel="stylesheet" type="text/css" />
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryDOMUtils.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryDOMEffects.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryWidget.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/SpryMenu.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarKeyNavigationPlugin.js"></script>
<script type='text/javascript' src="Spry-UI-1.7/includes/plugins/MenuBar2/SpryMenuBarIEWorkaroundsPlugin.js"></script>
<link href="CSS/stylesA.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="outerwrapper">
<div id="header">
<div id="navbar">
<?php include("Spry-UI-1.7/includes/SpryMenuBar.php"); ?>
</div>
</div>
<div id="mainbody">
<div id="logo">
</div>
<hr />
<div id="content">
</div>
</div>
<div id="footer">
<div id="footernav">
</div>
<div id="footertext">
</div>
</div>
</div>
</body>
</html>
SpryMenuBar.css
#MenuBar {
background-color:#333;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif; /* Specify fonts on on MenuBar and subMenu MenuItemContainer, so MenuItemContainer,
MenuItem, and MenuItemLabel
at a given level all use same definition for ems.
Note that this means the size is also inherited to child submenus,
so use caution in using relative sizes other than
100% on submenu fonts. */
font-weight: normal;
font-size: 14px;
font-style: normal;
padding:0;
border-color: #999999 #999999 #999999 #999999;
border-width:3px;
border-style: outset outset outset outset;
/* Caution: because ID+class selectors do not work properly in IE6, but we want to restrict these rules to just this
widget instance, we have used string-concatenated classnames for our selectors for the layout type of the menubar
in this section. These have very low specificity, so be careful not to accidentally override them. */
.MenuBar br { /* using just a class so it has same specificity as the ".MenuBarFixedCentered br" rule bleow */
display:none;
.MenuBarLeftShrink {
float: left; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBarRightShrink {
float: right; /* shrink to content, as well as float the MenuBar */
width: auto;
.MenuBarFixedLeft {
float: left;
width: 80em;
.MenuBarFixedCentered {
float: none;
width: 80em;
margin-left:auto;
margin-right:auto;
.MenuBarFixedCentered br {
clear:both;
display:block;
.MenuBarFixedCentered .SubMenu br {
display:none;
.MenuBarFullwidth {
float: left;
width: 100%;
/* Top level menubar items - these actually apply to all items, and get overridden for 1st or successive level submenus */
#MenuBar .MenuItemContainer {
padding: 0px 0px 0px 0px;
margin: 0; /* Zero out margin on the item containers. The MenuItem is the active hover area.
For most items, we have to do top or bottom padding or borders only on the MenuItem
or a child so we keep the entire submenu tiled with items.
Setting this to 0 avoids "dead spots" for hovering. */
#MenuBar .MenuItem {
padding: 0px 24px 0px 0px;
background-color:#333333;
border-width:1px;
border-color: #cccccc #ffffff #cccccc #999999;
border-style: none none none solid;
#MenuBar .MenuItemFirst {
border-style: none none none none;
#MenuBar .MenuItemLast {
border-style: none none none solid;
#MenuBar .MenuItem .MenuItemLabel{
text-align:center;
line-height:1.4em;
color:#cccccc;
background-color:#333333;
padding: 6px 15px 6px 39px;
width: 10em;
width:auto;
.SpryIsIE6 #MenuBar .MenuItem .MenuItemLabel{
width:1em; /* Equivalent to min-width in modern browsers */
/* First level submenu items */
#MenuBar .SubMenu .MenuItem {
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-weight: normal;
font-size: 12px;
font-style: normal;
background-color:#666666;
padding:0px 2px 0px 0px;
border-width:1px;
border-color: #cccccc #cccccc #cccccc #cccccc;
/* Border styles are overriden by first and last items */
border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst {
border-style: solid solid none solid;
#MenuBar .SubMenu .MenuItemFirst .MenuItemLabel{
padding-top: 6px;
#MenuBar .SubMenu .MenuItemLast {
border-style: solid solid solid solid;
#MenuBar .SubMenu .MenuItemLast .MenuItemLabel{
padding-bottom: 6px;
#MenuBar .SubMenu .MenuItem .MenuItemLabel{
text-align:left;
line-height:1em;
background-color:#666666;
color:#cccccc;
padding: 6px 12px 6px 5px;
width: 7em;
width:auto;
/* Hover states for containers, items and labels */
#MenuBar .MenuItemHover {
background-color: #333333;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .MenuItemWithSubMenu.MenuItemHover .MenuItemLabel{
background-color: #333333; /* consider exposing this prop separately*/
color: #ffffff;
#MenuBar .MenuItemHover .MenuItemLabel{
background-color: #333333;
color: #ffffff;
#MenuBar .SubMenu .MenuItemHover {
background-color: #666666;
border-color: #cccccc #cccccc #cccccc #cccccc;
#MenuBar .SubMenu .MenuItemHover .MenuItemLabel{
background-color: #666666;
color: #ffffff;
/* Submenu properties -- First level of submenus */
#MenuBar .SubMenuVisible {
background-color:#333;
min-width:100%; /* This keeps the menu from being skinnier than the parent MenuItemContainer - nice to have but not available on ie6 */
border-color: #ffffff #ffffff #ffffff #ffffff;
border-width:0px;
border-style: none none none none;
#MenuBar.MenuBar .SubMenuVisible {/* For Horizontal menubar only */
top: 100%; /* 100% is at the bottom of parent menuItemContainer */
left:0px; /* 'left' may need tuning depending upon borders or padding applied to menubar MenuItemContainer or MenuItem,
and your personal taste.
0px will left align the dropdown with the content area of the MenuItemContainer. Assuming you keep the margins 0
on MenuItemContainer and MenuItem on the parent
menubar, making this equal the sum of the MenuItemContainer & MenuItem padding-left will align
the dropdown with the left of the menu item label.*/
z-index:10;
#MenuBar.MenuBarVertical .SubMenuVisible {
top: 0px;
left:100%;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse */
/* Submenu properties -- Second level submenu and beyond - these are visible descendents of .MenuLevel1 */
#MenuBar .MenuLevel1 .SubMenuVisible {
background-color: #ffffff;
min-width:0px; /* Do not neeed to match width to parent MenuItemContainer - items will prevent total collapse*/
top: 0px; /* If desired, you can move this down a smidge to separate top item''s submenu from menubar -
that is really only needed for submenu on first item of MenuLevel1, or you can make it negative to make submenu more
vertically 'centered' on its invoking item */
left:100%; /* If you want to shift the submenu left to partially cover its invoking item, you can add a margin-left with a
negative value to this rule. Alternatively, if you use fixed-width items, you can change this left value
to use px or ems to get the offset you want. */
/* IE6 rules - you can delete these if you do not want to support IE6 */
/* A note about multiple classes in IE6.
* Some of the rules above use multiple class names on an element for selection, such as "hover" (MenuItemHover) and "has a subMenu" (MenuItemWithSubMenu),
* giving the selector '.MenuItemWithSubMenu.MenuItemHover'.
* Unfortunately IE6 does not support using mutiple classnames in a selector for an element. For a selector such as '.foo.bar.baz', IE6 ignores
* all but the final classname (here, '.baz'), and sets the specificity accordingly, counting just one of those classs as significant. To get around this
* problem, we use the plugin in SpryMenuBarIEWorkaroundsPlugin.js to generate compound classnames for IE6, such as 'MenuItemWithSubMenuHover'.
* Since there are a lot of these needed, the plugin does not generate the extra classes for modern browsers, and we use the CSS2 style mutltiple class
* syntax for that. Since IE6 both applies rules where
* it should not, and gets the specificity wrong too, we have to order rules carefully, so the rule misapplied in IE6 can be overridden.
* So, we put the multiple class rule first. IE6 will mistakenly apply this rule. We follow this with the single-class rule that it would
* mistakenly override, making sure the misinterpreted IE6 specificity is the same as the single-class selector, so the latter wins.
* We then create a copy of the multiple class rule, adding a '.SpryIsIE6' class as context, and making sure the specificity for
* the selector is high enough to beat the single-class rule in the "both classes match" case. We place the IE6 rule at the end of the
* css style block to make it easy to delete if you want to drop IE6 support.
* If you decide you do not need IE6 support, you can get rid of these, as well as the inclusion of the SpryMenuBarIEWorkaroundsPlugin.js script.
* The 'SpryIsIE6' class is placed on the HTML element by the script in SpryMenuBarIEWorkaroundsPlugin.js if the browser is Internet Explorer 6. This avoids the necessity of IE conditional comments for these rules.
.SpryIsIE6 #MenuBar .MenuBarView .MenuItemWithSubMenuHover .MenuItemLabel /* IE6 selector */{
background-color: #333333; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar .MenuBarView .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel/* IE6 selector */{
background-color: #666666; /* consider exposing this prop separately*/
color: #ffffff;
.SpryIsIE6 #MenuBar .SubMenu .SubMenu /* IE6 selector */{
margin-left: -0px; /* Compensates for at least part of an IE6 "double padding" version of the "double margin" bug */
SpryMenuBasic.css
/* SpryMenuBasic.css - version 0.5 - Spry Pre-Release 1.7 */
/* Copyright (c) 2010. Adobe Systems Incorporated. All rights reserved. */
/* This is the css for a basic Spry 2 MenuBar.
* The first section is basic layout, and should in general not need to be modified.
* The final section of this file specifies images to use for arrows for the menu. These
* are either down or right-pointing as required by horizonatal or vertical layouts. You
* can either replace the referenced images with your own, or you can modify these rules to
* point to your won images.
* These rules are supplemented by those specified in the OAM file for inclusion in the html document,
* or alternatively, the file SpryMenuBarBasicSkin.css which is included with this widget. */
/* Resets for ul and li in menus */
.MenuBar .MenuBarView, .MenuBar .SubMenuView {
display:block;
list-style:none;
margin:0;
padding:0;
/*** Layout Rules for Basic Menu ***/
/* Top Level MenuBar
* Because we float the MenuItemContainers in the MenuBar, we have to make sure the menubar wrapper expands to hold them all.
* The simplest way is to float the widget wrapper
.MenuBar { /* overridden by .MenuBarVertical version of this rule */
float:left;
width:100%;
.MenuBarVertical {
float:left; /* Used to make menubar shirink to fit contents */
width:auto;
/* SubMenus */
.MenuBar .SubMenu {
display:block;
position:absolute;
top:0;
left:-10000px; /* By default, all non-visible submenus are hidden by moving way to the west */
padding:0;
/* First level of submenus - pulls down from horizontal menubar, right from vertical */
.MenuBar .SubMenuVisible{ /* overridden by .MenuBarVertical version of this rule */
top:100%;
left:0px;
.MenuBarVertical .SubMenuVisible {
top:0px;
left:100%;
/* All submenus below level 1. All pullout to the right */
.MenuBar .SubMenu .SubMenuVisible {
display:block;
position:absolute;
top:0px;
left:100%;
/* MenuItems, MenuItemLabels, and MenuItemContainers */
.MenuBar .MenuItem {
display:block;
text-decoration:none;
.MenuBar .MenuItemLabel {
display:block;
.MenuBar .MenuItemContainer {
position:relative;
white-space:nowrap;
float:left; /* overridden by .MenuBarVertical version of this rule */
display:block;
margin:0;
padding:0;
.MenuBarVertical .MenuItemContainer {
float:none;
.MenuBar .SubMenu .MenuItemContainer {
float:none;
/* Layout Rules needed by IE6 - excluded from other browsers */
.SpryIsIE6 .SubMenu .SubMenu {
width:100px;
height:1%;
.SpryIsIE6 .MenuBar .SubMenuVisible .SubMenuVisible {
width:auto;
/* End Layout section */
* Arrows - This section specifies arrow images for a submenu dropdowns in Basic SpryMenu.
.MenuBar .MenuItemLabel{
background-image:none;
/* For all arrows used here, we depend upon the image to push itself away from right edge, or the user can add right padding to the MenuItem */
.MenuBar .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuDownGrey.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuDownWhite.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBarVertical .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBarVertical .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .SubMenu .MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.MenuBar .SubMenu .MenuItemHover.MenuItemWithSubMenu .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
/* IE6 rules for Arrows */
.SpryIsIE6 .MenuBar .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuDown.gif");
background-position:right center;
background-repeat:no-repeat;
.SpryIsIE6 .MenuBarVertical .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;
.SpryIsIE6 .MenuBar .SubMenu .MenuItemWithSubMenuHover .MenuItemLabel{
background-image:url("images/ArrowMenuRight.gif");
background-position:right center;
background-repeat:no-repeat;I love your subject line
Spry Menu 2.0 issues in IE7.. yes another one!
It is us as designers/developers that need to create websites for all current browsers. No sense in blaming the browsers, although in this case we could blame Spry Menu 2.0.
Problem with that is that Spry Menu 2.0 has been successfully tested in all modern browsers.
This leaves us with just one possibility, the designer/developer has erred somewhere along the line. After having checked the support files (JS and CSS) and looked at the markup, we now go to the constructor and see the following
var MenuBar = new Spry.Widget.MenuBar2("#MenuBar", {
widgetID: "MenuBar",
widgetClass: "MenuBar MenuBarLeftShrink",
insertMenuBarBreak: true,
A comma after the last value.
I also am wondering why there are two css pages for the menu bar.??
One is the standard CSS for the menubar and under normal circumstances, should not be touched; the other is for the convenience of the designer/developer so that he/she can tweak the menubar to suit. If you wish, you can combine both. In all cases, keep in mind that the CSS for the standard (basic) menubar should come first, so that the other CSS can override the first.
This needs to be corrected in your document
Gramps -
Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank youHi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?
Yes, if you purchased it in an Apple store, they should be able to assist you. Bring your MBP with you as well as the Drive.
Ciao. -
Issue in connecting to the internet wireless with my Linksys
OK. Here's the deal. I am entirely frustrated and also over my head trying to solve this on my own as I have no idea what I'm doing.
I have a Mac Powerbook, OS X (3.9). I have always connected to the internet wirelessly through my Linksys router (Wireless B Access Point, Model Wap 11).
I have recently moved and now use Comcast for my internet. When they installed my internet, I had not yet unpacked my wireless router, so I was set up to be connected via the actual cable plugged in. Now that the router is all set up, I cannot for the life of me get my wireless to work. Currently, I can use the internet wirelessly in other homes/school no problem. In those cases, I don't do anything, I just turn on my computer and it connects automatically. But for some reason in my apartment I cannot make it work.
I *think* the problem lies somewhere in the IP address area? If I look at my Airport settings and go to the TCP/IP tab, there is no information contained on the screen. Meaning, in the area where it says IP Address, Subnet Mask and Router, there is NO data listed, just gray empty space. The same goes for the DNS Servers and Search Domains areas, but at least in that case there is a white box to input text.
I can choose the "Configure IPv4 Using DHCP Manually" and that will let me input numbers, but I have no idea if I should even be playing around with this.
Also, perplexing me even more, is the fact that I can choose my Linksys internet connection through the Airport screen, and when I have selected it, I show full bars. But I can't actually connect.
Silly me, I attempted to call Comcast for help with the issue, but they say that as long as I can connect to the internet in any way (plugged in) then they do not care that I can't connect wirelessly.
I miss checking my email in bed...someone please help!!!
Thanks a million in advance for any and all help.
-ktAre u talking about routers username , password? Well there is one routers username ,password (default is "admin") and the other is your cable ISP username , password (on the routers webpage). I am talking about the latter. If nothing works, try resetting your router ... You will have to configure it again (doesnt take much time if you know it).
-
Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?
The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.
-
I'm a Former Verizon Wireless Employee with Billing Issues the Ruined My Life
>>Duplicate post removed to comply with the Verizon Wireless Terms of Service.
See I'm a Former Verizon Wireless Employee with Billing Issues That Ruined My Life<<
Message was edited by: Verizon ModeratorSorry to hear about your collections mishap, just keep in mind this is a peer to peer forum for customers and you likely will not receive the help you are looking for from Verizon.
Now you say that the account went to collections and you have paid it. So at this point I am not sure what you can negotiate anymore. I've read that if you have something in collections and tell the collecting company that you will pay them if they remove the negative mark from your credit, they will negotiate it with you.
In this situation, if things are as you say and you did not receive the final bill at the correct address, then you may have an argument to take to the credit bureaus. I would file a report with the credit bureaus and see where that takes me, also once your account goes to collections to my knowledge it doesn't have anything to do with Verizon anymore. The debt is between you and the collections company. I would try to contact them and see if you can somehow negotiate having the collection removed from your credit report seeing as the debt has been settled and the bill was never sent to your correct address.
I haven't really ever dealt with an account in collections, so this is just some helpful information I have thought of, if anything is not accurate in how you can deal with this, I apologize. -
Infinity won't work wirelessly with Ubuntu OS
I'm running Ubuntu Netbook Edition and upgraded my BT broadband to Infinity on 28.12.11, using the same HomeHub3 that worked perfectly well with the old Total service.
It doesn't work, wirelessly. I can get an apparently strong connection, but its agonisingly slow. At the same time, an ethernet connection works well, When I switch from one to the other and test the speed, I can watch the bandwidth fall away (i.e.: it isn't immediately disconnected.)
Nobody at BT can or will help, telling me that Ubuntu is 'unsupported' (i.e.: it's my problem). I reported this problem to BT - ref: xxxxxx-xxxxxx - via its complaints form on 28.12.11, but have had no response.
I've spent much time this past week on internet help forums. It transpies that BT has known about this issue with Ununtu for six months, but has apparently done nothing about it and cannot suggest a solution.
Suggested workarounds from other Ubuntu users involve manually reconfiguring one's connection, but my netbook won't allow me to apply the changed settings, or to change the router settings from N to G tech., but that only worked temporarily for me and, besides, my netbook is only a couple of year old.
When I was sold Infinity, nobody mentioned that it doesn't work with Ubuntu. Frankly, I feel it was mis-sold as I intended to increase the bandwidth of my Total account and was persuaded to take Infinity on the grounds that it's a superior service for the same price. Not from where I sit, it isn't.
The only solution I can see is to get BT to switch me back to their Total service, which suited me fine. I'm going to get their engineer to come back and uninstall Infinity. I will also complain to Offcom, as this situation could easily have been avoided had the BT sales person told me that Infinity won't work wirelessly with Ubuntu.Firstly your negotiating skills with BT are far better than mine....
"....Total account and was persuaded to take Infinity on the grounds that it's a superior service for the same price"
I was on BT Total BB and had to pay an extra £2 pm for Infinity and then an extra £4.75pm uplift of the calls package to give me the same anytime calls I had previously.... And had to re-start another 18month contract!!! Ohhh well.
Right onto the problem... Webby's suggestion of making sure your on a clear or least used wireless channel is good advice.
Here is the link to the free software http://www.metageek.net/products/inssider/
Have a look at a demo,- http://www.youtube.com/watch?v=pf2kZCfYTxI
To be honest I would move your HH3 from the Automatic setting to a fixed wireless channel as they seem to work better like that.
If your Operating System won't work with Inssider I would then just try a different channel starting at 1 and work up... seeing how things go.
Regarding setting your HH3 to wireless g, that is a very backward step as the most you'll get over that would be around 20Mbps depending on your distance from hub etc.
Couple of pics comparing my speed test over wireless g and n in THIS POST.
Another thing I would try is a wireless n USB adapter... just in case your m/c is only g
Links of how to identify what yours is and pictures of the difference in the "Network Sharing Centre".. 54Mbps being g and anything above is wireless n....
Wireless n gives the best speed assuming your Infinity download IP is more than 20Mbps. Also wireless n signal is more robust penetrating walls etc.
There are links to the type of wireless n adapters I use... Picture of one HERE, (Don't need the extender cable shown in that picture).
wwwebber's post was very useful.-
"I use Ubuntu on my laptop with BT Infinity & HH3 with no problems at all. BT is not at fault here - they do not support Ubuntu."
Confirming Infinity and Unbunto do work...
You say ".....but my netbook won't allow me to apply the changed settings, or to change the router settings .... but that only worked temporarily for me......"
As changing settings worked temporarily you must have been able to log into your HH3.
If you really can't log in can you borrow a friends netbook running windows to get logged in perhaps?
Log in,- http://bthomehub.home/html/home/home.html go to Advanced settings, wireless. and change Channel settings from Automatic to a channel number then click on Apply.
I would place your laptop near to the HH3 and move the HH3 wireless channel to a clear channel or start at channel 1.
Try to get a good wireless n speed..... example of mine 37Mbps over http://www.speedtest.net/
Then when you have a reasonable speed move your laptop away... you will notice a drop over distance that's normal.
I am 20' away from my HH3 and get 37Mbps through a plasterboard wall.
Regarding other routers people have used http://community.bt.com/t5/BT-Infinity/List-of-Routers-to-replace-Home-Hub-3/td-p/298203
And see Ady's msg #21 and #25 in THIS THREAD.
"'ll try the netbook in different locations over the w/e and hope from a solution from Ubuntu before remonstrating further with BT".
Please let us know how you get on.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR) -
Live Wireless with other webcams?
As those of that own the Creative Live! Wireless webcam know, the image quality is quite low. I love the portability of the embedded server, but does anyone know if this will work with other higher quality webcams? I tried my older (but higher quality) logitech webcam but the server did not recognize it. Has anyone tried other creative brand cameras? Any luck? It would be great if the server could support a wide variety of cameras, this would extend the life of the server, allowing you to upgrade the cameras as higher quality ones become available.
As a side note, can this server stream two webcams at once? What about support for a USB hub and more then two webcams?
Thanks for any replies.I haven't tried other cameras. I don't know if they would work. I suspect that the driver(s) in the server can only work with limited devices. Nonetheless the life of the server is tempered even more so by the CreativeDDNS issue. For a while now the DDNS registration used in the Creative Li've Wireless Server is not working correctly. There is another thread devoted to that topic "Is the creativeddns working"
-
Pressing Question about my wireless performance. Yes ... everyone has one! ":-\
Is there any reliable and typical answer that could satisfy me about this layman test I performed?
My neighbor across the street has the same Verizon DSL speed I have. He recently acquired his service with a new modem.
My service and modem are about 7 years old.
I can connect, with his permission, to his Wi-Fi service, which is about 150 or more feet away in another house yet.
I can connect with my wireless with my Wi-Fi service with the router right next to the pc
Using the test which they claim is very accurate at http://www.auditmypc.com/internet-speed-test.asp
I get no better speeds with my service, just a couple of feet away than with his at 150 plus feet. Connected to his wireless even my pc connected with the network cord, the speeds are very compareable.
I asked Verizon if it could be my modem was 7 years old. They said no, their tests showed I was getting what I should be. How is it that his wi-fi is so strong I can get speeds comparable to mine just 3 feet away?
Is there any reasonable explanation, and should I press them for something .... I don't know what? I think as long as they say I am getting what I should they won't take action. Even though the speeds are comparable when I connect to neighbors everything is more fluid, quick. On mine when I am trying to follow links or even in such as Facebook, which I guess has to update via the wi-fi when scrolling etc, for more data it is choppy and lags. When connected to his it's more fluid.
Any help here? Thanks for taking the time to read. jackFirst question is how do you know your neighbor has the same speed you do. Have you compared transceiver statistics?
Verizon prices DSL service in tiers, basically anything between 1 and 3 mbps is considered to be 3Mbps, and anything from 3-7mbps is 7mbps. So unless you have compared transceiver statistics, you don't know if your neighbor really has the same DSL speed you do or not. So while you might be a 1.5mbps, he might be at 3 mbps, but you would both be in the 3mbps tier.
Having said that, and assuming you really both have the same underlying speed, you get down the issues with wireless in general. The problem with 802.11b/g service is the band that it operates in is shared by a veritable laundry list of devices including remote controls, cordless telephones, and other wireless devices. There are essentially 3 channels available for 802.11b/g, 1, 6 and 11. Depending upon the exact circumstances, some channel choices are going to be much better than others. You can change the selection from automatic to specific channels by logging into your router, and access the wireless menu.
Ultimately the performance of your wireless is driven by the signal to noise ratio. The higher it is, the faster the connection. Other users of the band where 802.11b/g operate generally look like noise, and reduce the signal to noise ratio, and the effective speed of the connection. The unpleasant reality is there are more things that can interfere with 802.11b/g service than you can shake a stick at, and that's why Verizon will say nothing and do nothing about a wireless service from their routers. There are simply too many variables that are beyond their control.
Bottom line is that you can try other channels for your wireless and see if it makes a difference. Ultimately if you want better performance, you probably need to go to a dual band 802.11n wireless access point (assuming your device has a card capable of 802.11n dual band operation). The 5 GHz band where 802.11n can also operate has more 'real estate' than the 2.4GHz band, and at the moment, substantially fewer applications. So the odds on a higher sustainable rate with 802.11n dual band service are better.
Maybe you are looking for
-
Acrobat X Pro will no longer open
I did not install any new software. I did not update Windows. All worked fine. I had a Word 2010 document open, and saved it to PDF. All worked fine. Opened it in Reader and then realized I could not do any security settings. I then secure it in Word
-
Need Help on how to center Pop Ups
Here's what I'm trying to do - I have thumbnails on my site and when you click on them I want a larger image to show up in a pop up. I've accomplished this by: 1. Clicking on the thumb and adding "javascript:;" as the link 2. Clicking on <a> so I can
-
Exporting to PNG, need to get rid of "transparent background"
Hi all, Just trying out Freehand as a solution for creating images for CafePress. I get it all set for 10" X 10", export it to a PNG file and upload it to CafePress. When I try to create a product there, the image is no longer 10" X 10", it is only t
-
Make report for the current form
Hi all I want to make report for my current form, and i use form 6i for example i have form which depend on table and i want to make button to make report for current form which show some of field from table Best regards for all member here Yasser
-
ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.