Laserjet 5m giving memory error message

Hi, my faithful Laserjet 5m has started giving the following message when printing PDF files "This job requires more memory than is available in this printer. Try one or more of the following and then print again: For the output format choose Optimise for Portability; In the device settings page make sure Availabl Postscript Memory is accurate; Reduce the number of fonts in the document; Print the document in parts"
This only happens with pdf files and then some only.
Previously I have had no problems with this old printer.
Any thoughts please.
Chris R.

Hi rock_doctor,
Do you get the same messages when printing from a different computer?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • I have a new hp 2050 printer and received a 10.0000 supply memory error message. what does this mean

    I have a new hp 2050 printer and received a 10.0000 supply memory error message. Can anyone tell me what this means and how to fix it?

    mickeymackey, this error looks similar to a related error code that I found for laserjets. Here is a summation of that error code:
    http://goo.gl/W7dP6
    This describes the problem as being a cartridge error, in which case I would follow the instructions in this document and see if that resolves the issue:
    http://goo.gl/h6hWz
    that does not resolve the issue, then I would recommend performing a hard reset of the printer. This would involve unplugging the printer for thirty seconds from both the back of the unit as well as from the outlet it is plugged into and then plugging the machine back in and powering it on.
    A few additional questions are: Is this printer plugged into a surge protector, wall outlet or battery backup? The ink you are using, are they original HP cartriges or have they been refilled before?
    Let me know!

  • I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    This will tell you how to restore
    http://support.apple.com/kb/HT1414
    You will probably need to use recovery mode
    http://support.apple.com/kb/ht4097

  • Low memory error message - shut down app

    Last 2 days, I keep getting low memory error message and asking me to close CS Suite application, or it closes on me.

    Details, OS, RAM, free disk space, scrach disk space, etc.

  • No memory error message on my mac mini what do i need to do?

    No memory error message on my mac mini when i try to update. What do need to do?

    Please post the entire and exact message.

  • I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?

    I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?   I had to re-connect my iMovie t

    USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
    OWC have a few different ones for sale.
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
    Do you also connect the external USB drive to the AC power as well while you use it ?
    Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
    Stewie
    Message was edited by: stewiesno1

  • Adobe X Pro 10.1.10 Out of Memory error message

    Hello One, Hello All
    Since updating our Adobe X Pro machines to version update 10.1.10, we occasionally receive an "Out of Memory" error message, which depending on what we are doing, may force us to shutdown all Adobe windows and re-open Adobe, or simply click OK and continue working with the PDF document like nothing is wrong. It seems to have no rhyme or reason to when or why it occurs. I do not see any warnings or errors in the Windows Event Log. It happens with files we have created, and also happens with files received from internal and external sources through email. It is affecting our high end machines: Lenovo X Series and W Series laptops with Windows 8.1 3rd/4th gen i5 CPUs, 8+GB RAM, 128+GB SSD's. We have all system and Windows updates applied. We have Trend Micro and Malwarebytes real-time protection and system scans do not find any malware.
    I have found a few other recent threads on Adobe forum related to this error message but the responses are weak at best with no definitive fix. The system and user temp folders size are less than 100MB each so this cannot be the issue. When the error occurs I check task manager and system utilization, including memory, is well below 100%.
    We did not have this issue prior to version update 10.1.10.
    Really hoping Adobe can step in to help here and hoping boilerplate responses are not used.

    Hi wayne103,
    We released a new security update yesterday that is v10.1.11
    Please update to this version and check the performance.
    I have seen this error message occur while opening a 3rd party created pdf that has corrupted file structure.
    Please let me know if the issue occurs for some specific files or random
    Also let me know the PDF producer for these pdfs.
    Regards,
    Rave

  • Acrobat reader on iPad giving an error message

    Acrobat reader on iPad giving an error message "No viewer available on your device" when I try to open a PDF I uploaded to Acrobat.com. I changed the name of the file. It shows up on the list and starts to load, then gives the error message.

    It could be a corrupted file. Can you view it on a Mac or PC in Adobe Acrobat.
    BTW, there is no Acrobat Reader on iPad. It's ADOBE READER.

  • "Insufficient Memory" error message

    I got “Insufficient Memory” error messages in working on the job needed large files ( > 100MB) with AI 5.5 in office with below #1 PC spec. Error message starts to happen after working 15min to 1 hour depends on the file. I need to restart computer in each “Insufficient Memory” error message pop-up (otherwise the messages will continue to pop-up). Sometimes the file can’t be saved after the error message occurred.
    I have never encountered this memory issue at my home with below #2 Mac spec.
    #1 PC spec looks better than #2 Mac spec. Why PC can’t perform like Mac does? 
    Do you have any solution to fix the “insufficient Memory” issue in  #1 PC spec?
    I had already reset the AI preference as the following link but it doesn’t work.
    http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-630ca .html
    Our IT told me “He won't check whether there is any system or hardware problem (in PC #1 spec) because it will spend his much time in doing so.” 
    #1 PC spec (at work)
    Brand: PC desktop
    Processor: Intel [email protected]
    Memory: 16GB
    OS: Window 7
    #2 Mac spec (at home)
    Brand: iMac 27”
    Processor: Intel i7 Quad core @2.93GHz 1333MHZ
    Memory : 12GB
    OS: Mac 10.6 Snow Leopard

    Illustrator versions before CS6 use 32 bit processing
    http://stackoverflow.com/questions/639540/how-much-memory-can-a-32-bit-process-access-on-a -64-bit-operating-system

  • Anybody with isues running office:mac 2011,  I am using Mac OS 10.6.8  It ran for years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

    Anybody with isues running office:mac 2011,  I am using Mac OS 10.6.8  It ran for 2 years then recenty started giving me error message that it might not be compatible. I tried reinstaling with no luck.11?

    I think my problem has been that in Sytem Preferences>Mouse, my "Double-Click Speed" was set to the SLOWEST setting. After some experimentation, I now have the that setting two notches from the "Fast" end of the scale. In case it's important, the "Primary mouse button" in my Preferences is set to "Left".
    This not only solves the text selection issues described, but also seems to eliminate the strange "resolving alias to" problem.
    [For the curious, I have a Logitech Performance MX wireless mouse which can be configured with "Logitech Control Center". But the LCC software doesn't control double-click speed; this setting can only be made in the Mouse System Preference pane.]

  • Indesign cc files not saving but not giving an error message

    Indesign CC files not saving but not giving an error message
    I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
    Can anybody suggest a solution?
    Thanks
    Janine

    Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
    Mylenium

  • InDesign CC Out of Memory Error message problem

    I am getting an Out of Memory Error message in InDesign CC and it is crashing. Very unusual and not a particularly lage file. Contains a few PDFs and crashes tend to be when scrolling- is it a screen redraw problem?

    Does it have an SSD or conventional hard drive? How much free space?
    For testing you should create and log into a new user account and see if the problem persists. That will narrow the possibilities to either user-related or document/application/system problems of some sort. Is this happening frequently? More than the one file? If it's just the one, try this: Remove minor corruption by exporting

  • "out of memory error" message when not out of memory

    I've gotten this message before (as have others) when I'm clearly not out of memory. It's been about a year since this happened last, and I can't remember how I solved it. It seems many others have had this problem and that there has been no simple solution. It occured when I was trying to revise some titles over an imported .mov image which was downloaded from the internet. I revised the titles, but they wouldn't render. Then I got the "out of memory" error message. So far I have:
    1) Logged out and logged back in
    2) Rebooted
    3) Pasted my sequence into a new sequence
    4) Saved the project as a new project
    None of these things have worked. Of course this all happens when I'm at the very end of the project with a deadline of tomorrow.

    I'm having the same problem. I searched "out of memory" and found this solution on another thread..
    http://discussions.apple.com/thread.jspa?messageID=1162802&#1162802
    However, it didn't help me and I am still looking for an answer. I am running FCP HD 4.5 and Avid Express Pro. I edidted together an 18 min video w music, no effects and exported it as a reference movie. Imported to FCP to add chapter markers and that's when I get the "General Error Out of Memory" Tried the make clip offline thing, but that didn't work. Tried exporting a different video from Avid, 3 min and that worked (with chapter marks).
    Anyway, I feel your pain. If you find a solution, please mark this thread "question answered"
    Thanks
    Quicksilver 867   Mac OS X (10.3.9)   1.12 GB SDRAM, 80 gig + 160 gig

  • When i am doing PGI System giving this error message

    When i am doing PGI System giving this error message
    when i am posting the stockthrough t.code mb1c also i am getting this error
    For document type WL, an entry is required in field Doc. Hdr Text
    For document type WA, an entry is required in field Doc. Hdr Text
    Message no. F5480

    Hi,
    Enter header text or make the header text field option for the document type. It will allow you to save.
    You can make the field as optional either with Transaction Variant (SHD0) or from IMG.
    Regards,
    Naveen.

  • Cannot sign into my account. Giving network error message.

    cannot sign into my account. Giving network error message. Now what?

    No order number or the like in your message #2. What you have posted in messages 2 and 4 is a lot of personal information like this:
    Allia...
    Wir...
    33...
    Hu...
    Of...
    F...
    twir...
    I am answering to your first message so that you can remove that information if you wish (you cannot edit a message of yours after it has been answered). May I suggest that you do, and that you stop sending it (probably inthe form of an automatic signature)? Don't forget that this is a public forum, not a private chat room.
    Now to your question. Your question is related with the PDF Pack service, not with the free Reader. The forum to ask is this:
    http://forums.adobe.com/community/createpdf
    And just to clarify matters: there is no Adobe PDF Pack software that you can buy. PDF Pack is a service provided by Adobe, and you payed to subscribe to that service. And if you really want to cancel your subscription without trying to find a solution to your problem, you can do it here:
    http://helpx.adobe.com/x-productkb/policy-pricing/cancel-subscription- acrobat-online-services.html

Maybe you are looking for