Laserjet 600 M601 (CE990A) won't automatically print from envelope feeder

All I want to do is have the envelope automatically print (without me walking over to printer and hitting the OK button).

Figured it out. In Word, under printer options, change feed from to envelope

Similar Messages

HP LaserJet 600 M601 doesn't want to use envelope feeder

1. HP LaserJet 600 M601
2. Windows XP 32-bit
3. Tries to print to different trays than envelope feeder when envelope jobs are sent to printer, eventually the envelope feeder shows up on the display and user can choose it to print. Then prints OK.
4. New printer.
5. HP LaserJet 600 M601 doesn't want to use envelope feeder:
Driver is configured with correct trays and printer with paper types.
User send a print job with paper size as Envelope #10 to printer, printer prompts for envelopes to be loaded in different trays, after Tray 2, and after Tray 1 then asks user to use the Envelope Feeder, instead of the just immediately printing to the envelope Feeder.
Tray configuration:
Envelope Feeder: Envelope #10, Envelope
Tray 1: Legal, Plain
Tray 2: Letter, Any Type
Tray 3: Letter, Letterhead
Hp LaserJet 600 M601 M603 PCL 6 driver version 61.114.1.10295
Firmware: 2131305_192069

Just got off the phone with HP on the very same issue using a 602dn printer. What ended up fixing my problem was downloading the HP Universal Print Driver ( www.hp.com/go/upd ). You'll want the PS driver, not the PCL6 one. When you exctract it, update your driver to the v5.4 driver. I don't know why that would have fixed it, but it did. Let me know if it works for you.

HP LaserJet 600 M601 HP Web Services tab disappeared

Setup a new M601 yesterday. Networking and printing work fine, but when I would click on the "HP Web Services" tab and try to enable web services, it kept popping up an error and tell me to check proxy settings. No proxy. Installed the most recent firmware (2200643_22834) and logged back in. Networking and printing working fine. Now the "HP Web Services" tab is gone! Ran through the firmware update again, same result. Would try to access it by direct url, but I have no idea what it is.
Where can I get the original firmware?
Does someone know the URL so I can try to directly access the page, should look something like, https://192.168.x.x/hp/device/???
Any other ideas? Is there some sort of console command line access for this printer?
Thanks, hope someone can help with this.

Hi there
I hope you are doing well and I hope you do not mind a suggestion
Your M601 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP Laserjet P4014dn won't auto print from tray 1

HP Laserjet P4014dn stopped auto printing from tray 1. Can't manually print from there either. Now it always pulls from tray 2 (bottom tray) even if paper is loaded in tray 1. Auto print is selected in software setting. SN [Personal Information Removed] CB512A. Help!

There may be a couple of reasons why the printer will not auto print from Tray 1.
The following references the User Guide for the printer which you can obtain from here:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf
Page 18 of the User Guide has the section "Paper Handling Menu".
This section defines the menu items that can be used to set Size and Type for Tray 1.
Page 85 of the User Guide has the start of the Configure Trays Section.
In this section there are two notes. If Tray 1 is set to ANY SIZE and ANY TYPE, the printer will pull from that tray whenever media is loaded in that Tray. If Tray 1 is set to a specific size, it will act like a Cassette. This means that it will follow the paper handling model of Trays 2, 3, etc..
Example: Tray 1 is set to Letter, Tray 2 is set to Letter. When a job is sent from the PC requesting Letter and the Sources is Auto, the printer FW will look for the highest number tray that has letter installed and pull from that tray. Thus, Tray 2 will always be used unless Tray 2 doesn't have paper.
Page 86 has the section "Configure a tray by using the Paper Handling menu".
Follow the steps in this section to validate that Tray 1 is set to ANY SIZE and ANY TYPE. If not set to ANY SIZE, ANY TYPE then change the setting to be ANY SIZE and ANY TYPE. You may have to scroll through the list of sizes and types to find what you are looking for.
Once possibility is that the printer is not detecting that paper is loaded in Tray 1. One method to verify this is to remove all paper from Tray 2 and lower trays if there are more than just Tray 2 installed. This will force the printer to pull paper from Tray 1 if paper is present. If paper is present and the Tray 1 menu items are set to ANY SIZE and ANY TYPE and the printer prompts for you to load Tray 1 with paper, it is possible that the printer is not detecting that paper is in the tray.
In this case, I would recommend you contact HP Support as the media presence sensor may no longer be working properly.
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Won't automatically print received faxes?

Hi all,
I turned on the fax option on my powerbook G4 today. I can send and receive faxes fine. The problem is that when I receive a new fax, it doesn't print. I checked off the box in fax and print setup to automatically print any received faxes, but it doesn't. The printer is hooked up to the airport extreme base station like it has always been. I can manually open the received fax and then print it out, but it is supposed to print out automatically when the fax is received. I already tried unlocking the padlock and resetting the print automatically setting, but it didn't make any difference. Can anyone help with this? I really need this to work.
Thanks
-Tom

Hello again,
I got it to work finally. I didn't realize that you had to specify the printer in two places in the fax preferences. Now it is working fine.

Hp laserjet 100 color mfp m175 does not print from network nor via usb cable

My hp laserjet 100 color mfp m175 just stopped printing last week. I have tried everything recommended but nothing works. I have re-install it both on wireless network and usb connection = nothing works. It prints all internal reports but nothing from any computer. I have 3 computers which I have tried to print from. It even does not print the test page. Please dont recommend to update drivers etc. as I have spend 2 whole days on this and nothing works!

Hi @einar1854,
I see by your post that you are unable to print by a USB or Wireless connection on 3 different computers, but the printer will print the hardware self tests. I can help you with this.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
For the USB connection, follow these steps if the there are no errors from the Print and Scan Doctor.
(once we get the printer printing this way, we can setup the wireless)
Here are steps to remove the jobs from the spool folder and restart the print spooler.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Follow the steps in this document to get to the device manager to check for the printer entries.
How do I get into Windows Device Manager?
Then click on Identifying problems in Windows Device Manager.
In the list click on Universal Serial Bus controllers and look for USB mass storage device and USB printing support, (make sure any other printers are turned off or disconnected)
Let me know what it showed in the device manager.
Check to make sure the proper port is selected.
Go to start, Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
Make sure the USB has a check mark beside it, if not put the check mark there and apply the changes.
Check the print Queue.
In the Devices and Printers folder.
Right-click the name of the product and then click See what's printing .
Click the Printer button, then click Cancel All Documents if there are any documents in the queue.
Click Yes to confirm the action.
If documents remain in the print queue, restart the computer.
Try printing again.
What operating system are you using on the 3 computers? How to Find the Windows Edition and Version on Your Computer.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Print a configuration page to see also if the printer has a valid IPV4 address, so we have that information for when we setup the wireless. Printing a Configuration Report.
Provide the first 3 sets of numbers in the IPV4 address.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro 200 color M251nw does not print from internet

I have a LaserJet Pro 200 color M251nw, set up for wireless printing. It finally works when printing from Microsoft Word 2010, but refuses to do so from the internet.
Can anyone help me?
Thanks!
SALLYANNC

Hi @SALLYANNC,
I see by your post that you are unable to print from the internet. I can help you with this.
Run the Windows updates and update your browser.
Try printing from another browser to see if you have the same results.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What internet browser are you using?
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 1018-script error message when I print from web sites

I have a HP Laserjet 1018. When I print from Microsoft products, it prints fine. However, when I try to print from a web site, it gives me an error message stating that there is a script error.

Its some PDF files, it prints using Adobe on a Windows OS just fine, but not in adobe on the Mac. It prints using preview but all the fine details of the picture does not print. One file that does not print is a drawing generated from AutoCAD.

HP LaserJet Pro 100 Color MFP M175nw - Problems printing from Mac laptop

Hi
I have never managed to get my prnter to prnt wirelessley from my laptop (Mac Book Pro - (OS X Version 10.6.8). It will print when connected via the USB cable however when I try to print wirelessly, the printer dialogue indicates that the printer is offline. Both of our iphones will print wirelessly from the printer.
Please help!

Hi rachelwallace,
Not sure what happened there. Should have gotten a blue wireless light when connected to the printer's network.
You could restore the printer's defaults and try one more time.
Restore the printer's network defaults.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0.
Try the previous steps for setting up the Adhoc to Infrastructure connection.
If you are still having issues and you have a Ethernet cable, connect it from the printer to the router.
Wait about a minute, print the configuration page to see if you get a IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
Since the software is already installed, all you have to do now is add the printer on the Mac.
Click the Apple icon ( ), and then click System Preferences.
Click on Print and Scan.
Click on the + sign.
Highlight the printer in the list.
Click on the add button.
Test the printer.
In case you don't have a Ethernet cable you may try the wireless direct setup.
On the printer, touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the Mac, click on the Airport and select the printer from the list to connect to.
Then open Safari and type in the IP address for the wireless direct (192.168.223.1) for the printer in the address bar. (don't worry about the light on the printer)
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
Apply settings.
Click on the Airport and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Then add the printer on the Mac.
Test the printer.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Print jobs won't automatically drop from the print queue after printing

I just bought an Envy 7640. When printing multiple documents, the first print job hangs in the queue after it prints, which prevents subsequent jobs from printing. The first job continues to show a status of Printing after it prints the job. I have to manually go into the queue and cancel the finished job before the next job in the queue will print. Having to clear the queue manually each time a print job finishes is not an acceptable fix to the problem. How can I get the printer to automatically delete the print job after it prints like it's supposed to do?

Thank you for your reply. The steps that you sent are for print jobs that you cannot delete from the queue. I also found those instructions earlier, however, it doesn't apply to the problem I'm having with my printer. I don't have a problem deleting print jobs from the queue. As my previous post stated, when I print multiple documents, the first document prints but it stays in the queue with a status of Printing. Because it stays in the queue with the Printing status, it prevents the second and subsequent documents from printing. My problem is that I have to go to the queue after every single job prints and delete it from the queue to allow the next document to print. It's ridiculous to have to delete every job from the queue after it prints. The printer should automatically delete the job after it prints it, and then print the next job in the queue. How can I make the printer delete a job automatically after it prints it?? Can you please give me a resolution to this problem? Thank you.

Automate Print from Crystal Viewer

Is there any C# .NET web application code that will trigger the Print button on the CrystalReportsViewer toolbar?
I was sent the code below in another thread, but have not been able to get it to work in C#. It says that 'ctrl' can never be type Windows.Forms.ToosStrip because it is of the System.Web.UI.Controls collection. Can you help shed some light for me???
    Private Sub DoWork(ByVal sender As System.Object, ByVal e As System.EventArgs)
        MessageBox.Show("Do your code here")
    End Sub
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
        For Each ctrl As Control In CrystalReportViewer1.Controls
            If TypeOf ctrl Is Windows.Forms.ToolStrip Then
                Dim btnNew As New ToolStripButton
                btnNew.Text = "My Button"
                CType(ctrl, ToolStrip).Items.Add(btnNew)
                AddHandler ctrl.Click, AddressOf DoWork
            End If
        Next
    End Sub

The code that you referred to is how you would do it in a windows forms application, it will not work in a web application.
The only way to do it in a web application is essentially through javascript. What you would want to do is capture the html that is generated when you click the print button. Essentially what happens when you press the print button on the viewer is it does a postback and adds some javascript to the page to launch the print dialog.
Each version and patch level may differ on the syntax of the javascript so you will need to figure out what you need to add for your version.

MacBook won't automatically wake from sleep after flipping computer open.

The only way my computer both goes to sleep and wakes from sleep is by clicking on the Apple icon and putting it to sleep before closing the lid and by pressing the power button after opening the lid. If I just close the lid without first clicking on "Sleep" under the Apple icon, the computer will continue to run and the Apple on the lid will continue to be lit while the sleep indicator light does not go on. If I just open the lid and do not press the power button, the screen will continue to be black and the sleep indicator light continues to glow. I'm not sure if I reset a system preference or something by mistake, but is there a way to fix this? Or is this an indication of a bigger problem?
Additionally, when my computer is asleep and I unplug my charging iPod, it wakes from sleep (the sleep indicator light goes black while the Apple on the back of the screen lights up). Is this an indication of a bigger problem?
My computer is only about 7 months old, so I am a bit worried if it is starting to show wear and tear already. Thank you for your help!

You're welcome to the Forums.
Go to System Preferences>Energy Saver, and set a time for your System to sleep.
Set both sliders to 10 or 15mins to nod off, when Inactive.
It's never a good idea to plug in or out, while the Computer is sleeping. If someone pokes at your ear while you're sleeping, you'll wake up too.

No Printer Resolution Options for hp LaserJet Enterprise 600 M601

Running under Mac OS 10.6.8, we've run into a problem printing separations to our new hp LaserJet Enterprise 600 m601 printer from Illustrator CS4, CS5 and CS6.
In the printer dialog box, once under the "Output" section, with the mode set to either "Separations" or "In-RIP Separations", there are no options listed in the "Printer Resolution" drop-down.
I've tried re-installing the driver, changing the resolution settings in the printer itself, using a generic PS driver, and contacting hp directly (their solution was to contact Adobe). I have yet to contact Adobe itself, but none of my other attempts netted a different result.
In the document ink listing, the Frequency and Angle listings are still editable, but needs to be done manually for every colour, and the dot shape options are non-existant.
We had previously been using a hp LaserJet 2300n, but we were running into insufficient memory issues on an increasingly frequently basis. The driver for the 2300n had several different sets of Printer Resolution settings, so once the new printer was set up, I *assumed* that it would have the same kind of options.
I have discovered that if I change my PPD from the proper driver (HP LaserJet 600 M601 M602 M603) to the old one (Hp LaserJet 2300) I am then able to select the resolution I want from the drop-down list, switch the PPD back to the proper one for the M601, and it seems to work (leaving the 2300 as the PPD file results in a warning and a failed print attempt).
I also tried printing something from a non-Adobe program using the M601, and there were two options available for printer quality (resolution?) settings.
Any thoughts?

Re instakll the printers driver first remove the printer from the printer list.
My only thought!

Automatic printing of a 'test' sheet

Every time I turn on the ptr (the c3100 all-in-one) it insists on printing a test page. How can I stop this? Ink cartridges are expensive!
The ptr is connected to a Compaq laptop by a USB cable; the OS is Vista.
thescrivener (william barish)

Hi Leslie
The print function in workstation applications won't automatically print the documents attached to an equipment. This function is designed to allow you to print using the print button in a SAP DIR or from CV04N, not for automated printing when a work order is released. This would require either an ABAP enhancement or a product like Seal.
The problem with linking a document to an equipment and printing it is that the equipment could have any documents linked including photos and numerous procedures or work instructions designed for different tasks. Unless all documents are relevant for all tasks, you could easily find yourself in a position where you end up printing 5 documents you don't need every time you release an order. This is the reason that the best technical solution is rather to link the document as a product resource tool to a maintenance order or task list. This indicates in SAP that the document is a tool required for that specific maintenance order or task and you can select different documents for different tasks and the order in which the documents should be used because without this the results could have serious safety impacts. I.e. ensure that the person follows the tag out procedure before trying to do another task on the equipment.
Regards,
Athol

Automatic printing of a document linked to an Equipment

Good day SAP Experts,
I have a question which I hope there is a simple answer to within SAP.
I have created some documents that are stored in a seperate pc and are linked to SAP PM equipments. (Transaction CV01N)
I can follow the link from the equipment back to the document, open and view/change this document and also when the document is open, I can print it.
So far so good, now is the tricky bit, I create a PM work order for this Equipment, I can see there is a document linked to the equipment, so I want this documnet to be printed automatically when I release and print the work order.
To put it simply, my request is similar to having received an email with an attachment, I want the attachment to be printed in full when I request the email to printed.
In the customising of DMS I have found :
Application Type
This key controls the processing of original application files with applications in document info records.
Use
For authorization purposes, you can define the following settings for each application, depending on the data carrier type:
1 - Display
2 - Change
3 - Print
But I cannot get option 3 to work or am I misunderstanding the use of "3-Print"
Any help or guidance greatly appreciated.
Leslie

Hi Leslie
The print function in workstation applications won't automatically print the documents attached to an equipment. This function is designed to allow you to print using the print button in a SAP DIR or from CV04N, not for automated printing when a work order is released. This would require either an ABAP enhancement or a product like Seal.
The problem with linking a document to an equipment and printing it is that the equipment could have any documents linked including photos and numerous procedures or work instructions designed for different tasks. Unless all documents are relevant for all tasks, you could easily find yourself in a position where you end up printing 5 documents you don't need every time you release an order. This is the reason that the best technical solution is rather to link the document as a product resource tool to a maintenance order or task list. This indicates in SAP that the document is a tool required for that specific maintenance order or task and you can select different documents for different tasks and the order in which the documents should be used because without this the results could have serious safety impacts. I.e. ensure that the person follows the tag out procedure before trying to do another task on the equipment.
Regards,
Athol

Laserjet 600 M601 (CE990A) won't automatically print from envelope feeder

Similar Messages

Maybe you are looking for