Last Refersh date in Webi Report

Hi All,
I'm getting different last refresh date and time on the webi report(using drill down report). I am getting the right date on the main report,  wrong date showing on the sub report report.
Could anyone advise me ASAP?
Regards,

Hi,
Thanks 4 reply, main report is showing correct 'Last refresh Date' but Sub Report showing a day ahead (Ex. if refresh the report today its showing 7th July,but the sub report showing 8th July. as 'last refresh date').i already refreshed the drill down report, but its still showing 8th July, its really strange.
Regards,

Similar Messages

  • How to run webi report automatically with the current date/system date in webi report

    Hi Friends,
    I have a webi report which has a date prompt now. Based on the selection that user makes while running a report, he will get the related data for that particular date selection. Now I want to make that date prompt automated that is the report should run automatically based on the system date daily on scheduling.
    I want it to run current day automatically without have to go in and pick the date in webi report. I will be scheduling the webi report. Can you please let me know how to achieve this functionality of running a webi report automatically with a system date.
    Please let me know if I couldn't make you understand so that I will write with an example.
    Waiting for your valuable solutions.
    Thanks in advance.
    Regards,
    Bhaskar

    Hello Bhasakar,
    1.Create sysdate object in the universe
    2.Create another query in webi and select only sysdate object
    3.In the original query drag the Day object in the filter pane and choose the "List of values" from another query.and select the sysdate object from the second query.
    So your report always will run for sysdate...
    regards,
    Naveen D

  • How to find the last run date of the report..

    please any one one help me
    how to find last run date of the report...
    for example if my report is zgrir...if i am exuted in last week
    if want to find when it executed
    last run date is req
    please any one help me...

    The trasaction stat is limited because i want all the execution date even if it is 3 years ago.
    I have tryied the transaction st03 but it is limited to 3 months ago.
    check transaction STAT and it's report RSSTAT00.
    U can copy RSSTAT00 into ZRSSTAT00 and modify corresponding.
    *& Report ZDSAP *
    REPORT ZDSAP .
    DATA: d_ref TYPE REF TO data,
    d_ref2 TYPE REF TO data ,
    i_alv_cat TYPE TABLE OF lvc_s_fcat,
    ls_alv_cat LIKE LINE OF i_alv_cat.
    TYPES tabname LIKE dcobjdef-name .
    parameter: p_tablen type tabname.
    data: begin of itab occurs 0.
    INCLUDE STRUCTURE dntab.
    data: end of itab.
    FIELD-SYMBOLS : <F_FS> TYPE table,
    <F_FS1> TYPE TABLE,
    <F_FS2> TYPE ANY,
    <F_FS3> TYPE TABLE.
    REFRESH itab.
    CALL FUNCTION 'NAMETAB_GET'
    EXPORTING
    langu = sy-langu
    tabname = p_tablen
    TABLES
    nametab = itab
    EXCEPTIONS
    no_texts_found = 1.
    LOOP AT itab .
    ls_alv_cat-fieldname = itab-fieldname.
    ls_alv_cat-ref_table = p_tablen.
    ls_alv_cat-ref_field = itab-fieldname.
    APPEND ls_alv_cat TO i_alv_cat.
    ENDLOOP.
    internal table build
    CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING it_fieldcatalog = i_alv_cat
    IMPORTING ep_table = d_ref .
    ASSIGN d_ref->* TO <F_FS>.
    SELECT * FROM (p_tablen) INTO CORRESPONDING FIELDS OF TABLE <F_FS>.
    LOOP AT <F_FS> ASSIGNING <F_FS2>.
    *your code goes here.
    ENDLOOP.

  • Current User & Key Date in Web Reports

    Hi,
    I want to default the current user name & current date (could be different from the varaible key date) in the header or footer of the web report. I tried text elements in the web template where we can default only the variable values entered by the user, or general text which include above two texts along with many other details which are not required by me. I have also tried text variable in the query properties in vein. Could someone give some tips, please.
    I have a formula variable "Current Calender Day". How I can create a text variable from this ?
    Thanks & regards,
    Sheeja.
    PS: I'm a functional guy, so kindly explain in detail if any EXit coding is involved.

    Hi Sheeja,
    If ur looking this option for a web template then please follow below steps for current user name & current date :
    1. Create a Text web item present under the Miscelaneous Tab of web items.
    2. In its properties tab Tick 'Display Text only'.
    3. Select General Text elements For text binding option (Present in Data binding)
    In general text Elements option:
    Make a binding with a data provider.
    For user name select - Current user
    For Current date - Select Last Refresh options.
    Try this, hope this will  help to u.
    Thanks !

  • Breakout of data for Webi Report

    I am not sure if this question should go here or in the Universe forum but I will post it here first.  I am using BOBJ Edge XI3.1 with SQL Server 2005 holding my data.
    I have a universe that has 4 tables in it.  The first table is "CSS_Facts" which is a Fact table consisting of aggregate data.  Table two is "TJG_Organization_CSS"  that holds six levels of hierarchy for all clients.  Corporation, System, Facility, Division, Service Line and Department.  Department is the lowest level so there is an "Organization_Key" for every department for every client.  Table three is "TJG_Survey_CSS" which holds all of the survey data for every client.  Every answer for every survey has its own "Survey_Key".  Lastly I have "TJG_Time" which has a "Time_Key" for every day of the year.
    Table "CSS_Facts" has a foreign key for each of the three tables above with the same field name as the key field in each of those tables.  The cardinality for all three of these joins is many to 1 from the "CSS_Facts" table (ex:  many "Survey_Keys" from the Facts table to one key in "TJG_Survey_CSS").  The facts table also has 4 other fields which hold the counts and or computed fields.
    All of this works perfectly for most of what we do.  I can build a WEBI document that has all of the fields that I need.  As an example, I can get a report of all the statements for a given timeframe for a specific survey number for a specific client.  If the survey has 50 statements in it I can get back all of the statements with the counts for all of the possible answers for each statement.  This is expected and what we want.
    Our problem is being able to break this down based upon the answer(s) to one question in the survey.  Let's say statement number 2 in the survey is an age statement that has 5 possible answers.  Answer 1 might be "Less than 18.".  Answer 2 might be "19 to 29.", and so on.  When I filter my query in my Webi to just bring back results for anyone who chose Answer 1 (Less than 18) for this statement I get back pretty much what I expect, that question only with all of the possible answers but a computed total for just answer 1 (less than 18) with all of the other answers getting zeroes.  Again, this is what I expect to get back based on the WHERE clause that is generated but not really what we want.  We want to get back the complete survey in the report, all 50 statements with new count totals per statement based on the answer (Less than 18) from that 1 question.
    Is this possible to do within Webi reports?  If not, can this be done outside of a webi report, but then brought back into the Universe to be consumbed by a Webi report?
    Thanks for any help in advance.

    You can use the following work-around without the need for an SDK solution.
    Display this info in the report in stead of in the pop-up...
    Just create a cell with the info want to show and hide it if there is data,
    (use and alerter to empty it when you have data and hide on empty)
    show it when there is no data fetched.
    Hope this helps,
    Marianne

  • No data in WEBI report - but plenty of data in the underlying Bex query...

    HI all - I have a problem with my webi queries - which are sometimes breaking...
    We run in the XI 3.1 ans SAP int, kit - SP 2 on both.
    Sometimes af perfectly well functioning webi report suddenly returns no values - stating that the query didn't find anything. However - if I run the bex query with the same selections I get plenty of data. So there is data. Therefore it might be a Int. kit problem - however, when I bulid a new webi report - similar to the first one, with same dimensions etc. but without all the formatting - It runs fine too!!!!
    So it seems like somehow the original webireport has lost the connection to the measueres which it holds - has anyone any idea to what the cause might be and how to fix it?
    By the way - I havre refreshed the Universe and there is nothing to update.
    BR
    Jess

    Hi Ingo - the MDX statement from the MDX trace - does not yield any data - However, if I make a similar selection in the BEX, there i data avaiable - so it might be a problem with the how the MDX statement is generated.
    I've trouble shooted further and my learnings are so far:
    The problem is caused by a combination of 5 dimensions
    If you remove either one of the 5 dimensions - the query returnsdata
    If you add a specific meausure (a restricted bex key figure) - data is also returned - also in the other measures.
    The MDX statement looks like this:
    SELECT  { [Measures].[D6ZWIC1Q7MOA2YCJM1LAPRQNG], [Measures].[D6ZWIC1Q7MPTG70294GIUMJ70], [Measures].[D6ZWIC1Q7NGQDWFMH0MZ7LEP8], [Measures].[D6ZWIC1Q7NI9R53543I7CG78S], [Measures].[D6ZWIC1Q7NWVQXAK7CQUMKQEK], [Measures].[D6ZWIC1Q7NYF45Y2UFM2RFIY4] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH2].[LEVEL01].MEMBERS, [0REPTT].[LEVEL01].MEMBERS ), [0EMPLSGROUP].[LEVEL01].MEMBERS ), [0PAYSCALEAR].[LEVEL01].MEMBERS ), [0ORGUNIT].[LEVEL01].MEMBERS ), [ZBOORGUNT                     ORGEH                         01].[LEVEL00].MEMBERS ) ON ROWS FROM [ZMPHPTGL1/ZDQHPTMN1] SAP VARIABLES [0P_CALMO] INCLUDING [0CALMONTH2].[12] [0P_CALYE] INCLUDING [0CALYEAR].[2009]
    Where all the measures in fact are restricted keyfigures from the Bex query. The dimensions are business content characteristics, as are the variables used.
    The above MDX statement returns nothing - but if you remover either one of the dimensions in the cross joins - the expected data is returned.
    Any ideas to why that happens?
    BR
    Jess

  • No data in Webi report, but data in underying BW Query

    I have a Webi report that is built off of a universe that is built off of a BW Query.  When running the Webi report, instead of getting data I get "All Data" under each field in the report, as opposed to the actual data.  I feel like I'm missing  something fairly basic.  Any help would be much appreciated!

    Try using the L01 dimensions, not L00.
    Hope this helps.
    André

  • Last Activity Date in Opportunity Report

    Hi Guys,
    Would like to knoe if there's a way to retrieve the Last Activity Date in a historical Opportunity report?
    Regards,
    Teena

    Basically, I need to show all opportunities with or without activities. If there are activities attached to an opportunity, then I need to get the Last Activity Date.
    I tried using the Activity object in reporting but if there's no activity linked to an opportunity, it is not being displayed in the report.
    Regards,
    Teena

  • Last executed date for a report

    Hi,
    I have to find out the last executed date of set of reports/programs. Please let me know how to get that information. Is there any table wherin I can give the list of reports and download the output?
    Thanks,
    Raj.

    HI,
    Check transaction STAD.
    There you can specify user, transaction or program and a time frame.The question will be, how long do you keep statistics in your system...
    Regards
    Kiran

  • Previous month data in WebI Report

    Hi All,
    I have a universe created on a Bex Query. I don't have any variables created in the Bex Query. I have to create a WebI report with Calendar Year/Month as selection and depending on what user enters, i have to display Cost for the month entered by the user and cost for (month -1 ). For eg. if the user enters Feb 2009, then the report should display Cost for Jan 2009 and Feb 2009. I have created a filter for Calendar Year/Month. How do i bring previous month data in the report ? I don't have to modify the Bex Query. I have to achieve it on the BO side. Can you guys help on this problem.
    Thanks,
    Saachi

    Hi,
    There is a restriction in BO when you use it with SAP.
    When the user filters the data for FEB 2009, you will not be able to get data for JAN 2009 as it does
    not go again to the Bex query to fetch this data.
    The only workaround as of now to this is to bring all the data using Bex query by having a filter
    at the BO Query level where you say Cal year/month key = (From prompt) or 
                                                          Cal year/month key <> #.
    This is because it considers Cal year/month as string and so even at the universe level we will not
    be able to create a previous month formula.
    I hope this helps.
    Thanks,
    Kartik

  • Showing all Characteristic values from Master Data in WebI report

    I want to show master data when there is no data in Cube, I have created constant variable with 1 value in Bex and I am using that in the crystal report but it's still not showing master data. Can anybody help me on this.
    Thanks,
    Ravi

    Hi Ingo,
    Thanks for your quick reply, I have created formula with constant value 1. Do I need to put that formula in rows or columns or as Free Char?
    Thanks,
    Ravi

  • Data Different in Web reports and Bex Report

    Dear Experts,
    We found that the data in web reports is not in line with BEx reports, The Infoprovider is same the query is same. But when we are executing reports with same varialbes in BEx and Web reports, they are showing different values.
    COuld you please let us know what could be the possible reasons for the above criteria, and how to overcome it?
    Regards,
    Rajni

    Hi Rajni,
    Clear the cache memory and run the web report agian.
    Hope it helps,
    Thanks ,
    Uday.

  • Reg; Webi Reporting Queries

    Hi Gurus.
    1. How to add 6 months to the current date in Webi report..
    2. My report is having last one year data,  I want to display only one month report from the Sys date..
    Regards
    L k Vepuri

    Relative months are poor in Webi. You're better creating something at the universe level. I've created a topic on the BOB forum that discusses relative dates in both SQL Server and Oracle:
    http://www.forumtopics.com/busobj/viewtopic.php?t=152613
    You need to be clear with your reporting requirement for a month since sysdate.
    An example of what is done at the database level:
    select DATEADD(mm,6,'2010-08-30')
    returns '2011-02-28'
    select DATEADD(dd,180,'2010-08-30')
    returns '2011-02-26'
    So while pumpactionshotgun has given you an approximation, there is currently no way for Webi to match a database's accuracy in relative months without massive high maintenance nested if statements.

  • Hierarchy variable in Webi report

    Dear all ,
    I'm expirence some problems in the Olap Universe , my question is :
    I can't see data in Webi report .
    Step 1 Create the webi report
    Step 2 Run the query
    Step 3 Select the Hierarchy variables in prompt parameter
    Step 4 Get the msg "No data to retreive "
    I can see the data in  BW with this Hierarchy variable so i don't understand what it's missing .
    Thanks a lot
    Bst Rgds
    Simon

    Dear Sanket ,
    Thanks for your response  , We are using the dimension it's a member of one hierarchy in the query panel without any filter .
    BOE release 3.1 Sp3
    BW 7.01 SP6 .
    Hope this helps , any further question please let me know .
    Bst Rgds
    Simon

  • BI 4.0 sp 6 service name to export data from webi to excel

    Hi there,
    I'm using BI 4.0 SP6 and I was just curious to find out which servers/services are invoked while exporting data from WebI report to Excel?
    Thanks in advance.
    Regards,
    samique

    Check below section in the Admin guide for this information.
    Architecture\Process Workflows

Maybe you are looking for