Launching Client Application error message

Hi anyone I created a client application and signing it. it can run fine in command line.
But when I call the JNLP file it gives exception,The exception is as follows:
JNLPException[category:download error:Exception:null:LaunchDesc:null]
at com.sun.javaws.security.SigningInfo.checkSigning(Unlnow Source)
at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknow Source)
Can any body tell me whats the wrong. Thanks in Advance.
zrjian

Problems have solved.
The reason was that the jar file which contains two Signature file(Abcjar.sf and Sun_micr.sf),the Abcjar.sf is creates by jarsiger , and another Sun_micr.sf is created by JBuilder 7.
when i remove Sun_micr.sf ,it is running finely.
I am confusing that I have setted new JDK1.4.1_01 in JBuilder 7 , why dose Sun_micr.sf contain JDK1.3.0:
This is part of Sun_micr.sf :
Signature-Version: 1.0
SHA1-Digest-Manifest: s4hapqcSzQWgILxttXiEIqQIbJQ=
Created-By: 1.3.0 (Sun Microsystems Inc.)
This is part of Abcjar.sf :
Signature-Version: 1.0
Created-By: 1.4.1_01 (Sun Microsystems Inc.)
SHA1-Digest-Manifest: lApsyt2mW2+hJ6j5tqu+z2hpCUk=
Thanks!
zrjian

Similar Messages

  • Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.

    Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.

    Hi Olegchursin,
    Please refer the KB : http://helpx.adobe.com/x-productkb/global/error-close-following-applications-continue.html
    "Close SugarSync if the application displayed is ShellExtLoader."

  • Custom JCA Adapter / Application Error - Message.setErrorInfo() ??

    Hi All,
    I was looking for how to create a sensible Application Error in a custom JCA adapter and was excited to find the following page in the PCK info on Adapter Development:
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/53d6409ff68631e10000000a1550b0/frameset.htm
    The part of interest being:
    <i>
    The following methods are available to enable you to read error information in the form of an ErrorInfo object from the message, or to set the error information in a message.
    Message.getErrorInfo()
    Message.setErrorInfo()
    If the synchronous response message is an application-error message instead of an application response, it must call setErrorInfo(myErrorInfo) for receiver adapters.</i>
    However, I can't find these methods, or indeed the "ErrorInfo" object anywhere in the AF classes - does anyone know it's whereabouts? Or is the above page just out of date? If so, what is the new approach for creating Application Level Errors in a custom JCA Resource adapter (not Exceptions - I can do that)
    Many thanks,
    Chris

    Well, you can get the latest jars from the SMP (Service Marketplace) directly.  These jars are in the <i>XI ADAPTER FRAMEWORK CORE 3.0</i> component.  Basically, http://service.sap.com/swdc  then Support Packages and Patches->SAP NetWeaver->SAP NETWEAVER->SAP NETWEAVER 04->Entry by Component->J2EE Adapter Engine (PI/XI).   There you'll see the XI ADAPTER FRAMEWORK CORE 3.0 link.
    OR here is the direct link for the SP19 (latest) of <a href="https://smpdl.sap-ag.de/~swdc/012002523100009492712006D/SAPXIAFC19P_4-20000272.sca?_ACTION=DL_DIRECT">SAPXIAFC19P_4-20000272.sca</a>
    Within this is <i>aii_af_lib.sda</i> which has the jars.  You can use winzip or winrar to open .sca, .sda files.
    Regards,
    Jin

  • I need help with an application error message

    AcroRd32.exe.- application error message appears. It states that   The instruction @"0x60006db6" referenced memory at "0x60006db6". The memory could not be "read". Click OK to terminate program.

    Please try to repair the Installation from control Panel-> Add Remove Programs-> Adobe Reader-> Repair.

  • RoboHTM.exe - Application Error message

    In one of my RH5 projects, I'm getting the RoboHTML.exe
    Application Error message "Instructions at ...referenced memory at
    ... . The memory cannot be read. Seems to happen when I try to
    create a new template or when I try to change the template assigned
    to a specific topic.
    Each time the project crashed, I tried to recreate the same
    template but it was already there. So I tried importing it but that
    didn't work.
    Although I'm using FlashHelp, which reports the hhp file as
    "unused." I tried Peter Grainge's suggestion regarding deleting xpj
    and cpd files and then using the hhp file to recreate my project
    files. This was fine except all of the templates that I had created
    vanished from the template folder. Because they were missing from
    the Templates folder, I was again confused as to what I should do
    as far as deleting or importing the templates to ensure that my
    version info displayed in the topic footers..
    I want to convert this project to Rh6 but am hesitant to do
    so until I've debugged the problem with this intermittent
    error.

    This has been covered in the forums before, but instead of searching, try this:
    Search for the file "cmsnxeye.exe" yields three locations:
    1) C:\Program Files\TARGUS\ACP50\Driver\CMdrv
    2) C:\windows\system
    3) C:\windows\prefetch\cmsnxeye.exeXXXXX.pf
    Delete the files in BOTH 2) and 3) and reboot. Let the board know how you do.
    T520 4239-CTO
    T61/p 6459-CTO (Gone but not forgotten)
    A31/p XP Pro 1 gig memory
    A30/p XP Pro 1 gig memory
    TP600 Win 2K 288 mb memory
    701C Win 98 Don't ask

  • Firefox application error message 0x754d2009 why?

    firefox application error message 0x754d2009 why?

    It happen because of Malware/Virus problem.
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • JCRMI Client Application - error on launching

    Hi, all!
    I have compiled JCRMI Client without errors, but during launching within Eclipse the message appears :
    "Could not resolve classpath container:
    com.ibm.bluez.jcop.eclipse.containers.cardconfig"
    What does it mean? How can I recover the error?
    Advice me, please.
    Best Regards!

    I have seen this before, but I have no idea what the cause is. The person that was having the problem later reported that reinstalling the jcop toolset helped. Otherwise I don't have any good suggestions.

  • Client Side Error Message in Notification Region

    Hi,
    Is there any way I can display my client side validation in NOTIFICATION region.
    My Scenario,
    In my application, I have dynamic Apex Items (Generating Using APEX_ITEM API).
    I have added client side validation (Javascript) when users clicks the button and I am showing my error message in alert window. (which is working fine). But now my customer wants to display the error message in Notification region instead of ALERT message.
    Can anyone help me to solve this issue. Thanks in Advance..
    Regards
    Balaji S

    Hi
    Yup, just create a div in the page template in the right place to hold your messages and give it an id like...
    <div id="noteArea"></div>Now in you javascript, rather than using alerts, you can use
    var noteObj = document.getElementById('noteArea');
    noteObj.innerHTML = 'my message with any HTML needed';Is this what you mean?
    Cheers
    Ben

  • Client side ERROR MESSAGE THROWN TWICE

    Hi,
    In our application we are having a af:inputText component, which has a client side validation. When the validation fails the intended error message is thrown twice on the screen. Below is the component code snippet,
    <af:inputText label="#{inventoryUIBundle.RANGE_TO}" autoSubmit="true"
    rendered="#{pageFlowScope.TelephoneNumberEditBean.addMode}" columns="20"
    maximumLength="#{pageFlowScope.TelephoneNumberEditBean.maxLength}"
    value="#{pageFlowScope.TelephoneNumberEditBean.maskedRangeTo}"
    binding="#{backingBeanScope.rangeToComponent}"
    id="number-rangeto">
    <af:validateRegExp pattern="[\\d\\s\\*\\#\\+\\-\\.\\,\\(\\)\\\\\/]+" messageDetailNoMatch="Only number, space and special character - + ( ) . , / \ * # are allowed."/>
    </af:inputText>
    Can any one provide any clue as to why this is happening.
    regards,
    Chandra.

    Another location where I have this issue,
    <af:inputText value="#{pageFlowScope.PlaceEditBean.entityObject.vertical}"
    label="#{inventoryUIBundle.VERTICAL}"
    maximumLength="25" autoSubmit="true"
    id="place1-vertical" partialTriggers="place1-latitude place1-longitude"
    binding="#{backingBeanScope.verBinding}"
    valueChangeListener="#{pageFlowScope.PlaceEditBean.onChangeVnH}">
    <af:validateRegExp pattern="(-)?(\\d){1,10}\\.(\\d){1,10}" messageDetailNoMatch="Only decimal numbers are allowed for vertical."/>
    </af:inputText>
    In the above tag set, there is a ValueChangeListener. This also has a double message issue.
    regards,
    Chandra.

  • PB acting goofy - Openin Application Error Message - refusing to print

    I was using Adobe Photoshop CS yesterday and noticed some of my usual tools were suddenly missing (grayed out). I figured it was a fluke, and didn't really worry about it.
    Then today, I am getting error messages for other programs (Mail, Adobe Acrobat Pro, Adobe InDesign CS, etc.) saying, "You are opening the application 'Acrobat Professional' (or whichever program) for the first time. Are you sure you want to open this application?" I have had these programs for years, and use them regularly. I've never ran across this before.
    I also have two printers (HP Color LaserJet 2550n, Brother IntelliFAX 2820), and every time I try to print on either printer, it tells me the printer's memory is full and it's unable to print.
    I have not done anything to my computer, other than the usual weekly maintenance with OnyX, repairing permissions, etc. which was done a week ago. I have been on OS Tiger for over a year now. I checked my S.M.A.R.T status last Thursday, and all was good.
    As I am deaf, I depend on my PowerBook to communicate with other people, and to get my work done. The computer was working fine until yesterday.
    Thank you so much in advance for any help and suggestions.

    Robbi:
    I would begin by running Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    Do you have the original Hard Disk Drive in this computer?
    What is the total capacity of your HDD and how much available capacity? (select Macintosh HD on desktop, then Get Info (Command + I))
    cornelius

  • MultiSim 9.0.41. Non-admin users unable to launch program without error messages.

    I have installed MultiSim 9.0.41 has been installed on four workstations. The PCs reside within a local domain with ten users. The domain resides within the greater university domain, is technically not configured as a true subdomain, but it has access to university domain resources (such as the license server). We have SSO (remote profiles) functionality enabled.
    MultiSim runs with without problems for admin users. We start having issues with nonadmin users. I series of pop-up messages appear when the program is launched:
    "The Microsoft Jet database engine can not open the file C:\Program Files\Electronics Workbench\EWB9\database\mscomp_s.prd. It is already opened exclusively by another user, or you need permission to view its data."
    "The Microsoft Jet database engine can not open the file C:\Program
    Files\Electronics Workbench\EWB9\database\CPCOMP_S.PRJ. It is already
    opened exclusively by another user, or you need permission to view its
    data."
    "Error loading library C:\Program
    Files\Electronics Workbench\EWB9\PCBComponentEdit.dll, ('998') Invalid access to memory location."
    "The Microsoft Jet database engine can not open the file C:\Program
    Files\Electronics Workbench\EWB9\database\mscomp_s.prd. It is already
    opened exclusively by another user, or you need permission to view its
    data. Error Code:3051"
    Solutions attempted (without success):
    - Update program (no updates found via update manager or NI site)
    - Run program as admin
    - Give all users full permissions to program files (major security risk)
    - Change "Directory for EWB Shared Components" to public shared drive. Interestingly, MultiSim shows the network drive as unwritable (though it clearly is).
    Any ideas? Are there updates that fix this issue? Is this solved by the newest version? What do I need to do differently to ensure that user config files are saved in their roaming profiles vs. locally (note: I have already tried to correct the paths during install and post-install without success).
    Thanks!
    Message Edited by refriend on 05-22-2008 02:26 PM

    Hi Refriend,
    The error message indicates Multisim is not able to read/write to the database folder.  Please have a look at the following knowledge base article for instructions to correct the database problem.
    http://digital.ni.com/public.nsf/allkb/B06773CE511C7E588625720B00502B8E
    Multisim 9, you need to setup the permission for the database manually but in version 10, this step is not required.  As for saving user config file as part of the roaming profile, this option is not available.  Multisim will always look in the locale drive for the config file and if one does not exist it will create one for that user and save it locally.
    Tien P.
    National Instruments

  • ITunes 7.1 won't start, invalid Win32 application error message comes up

    I repeatedly tried to download iTunes 7.1 for my new iPod nano on my Windows XP, when the download completes and I try to run the program an error message comes up stating that iTunesupdate.exe is not a valid Win32 application...I have tried erasing iTunes completely then re-downloading it, tried re-intsalling but nothing works. I have been trying to get help for the past month now, no one seems to know anything, this is the last resort please help ASAP.
    Thanx a bunch.

    okay, let's give this document a try:
    iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

  • Cannot launch Photoshop, no error message

    I have been using Photoshop Elements 7 for many years, but all of a sudden today it will no longer work.  The first time it launched as normal, and I clicked the "edit" option to open the editor.  But the editor never opened, and now no matter how many times I use the shortcut or even the exe itself, it will not open.  I checked under "processes" on the task manager and not even the process is appearing.  It's as if I'm tapping a rock.  I got no error messages at all.  Even trying to force it open through task manager fails.
    I'm running Windows 7 64 bit and I haven't done any changes to my system since last I used the program.  I have tried restarting, fully shutting down and starting, and I've run my virus and malware scans with no change.  I would uninstall and reinstall, but I lost the disk a long time ago and can't afford a new version.
    If anyone might know anything, please help.

    Find your Elements 7 serial number, looking in your Products list at Adobe.com under Manage and then install from the download on this page:
    http://www.adobe.com/downloads/other-downloads.html

  • Application Error Message. Need help identifying problem.

    From time to time i get the following error message and I'm forced to shut Illustrator down:
    Illustrator.exe - Application Error
    The instruction at 0x0034d17c referenced memory at 0x00000014. The memory could not be read. Click on OK to terminate the program
    Does anyone know what this means? This also occurs sometimes when I'm trying to select a font... for example Impact.. which isn't visible. Is the font corrupt? If so how do I go about obtaining a replacement? Whats going on here?
    Thanks

    Try either fixing permissions or removing the user cache using Onyx or Applejack.

  • I get an Application Error message when installing TestStand 2.0

    When installing TestStand 2.0 on a Windows NT 4.0 Workstation, following message appears when installing Engine: Application Error - The instruction at "0x685876b3" referenced memory at "0x685876b3". The memory could not be read.

    Hello Eduardo,
    This is a strange behavior, and I guess I have a couple of comments. TestStand works fine with Windows NT 4.0 but it needs at least Service Pack 3 installed. So make sure you have the SP installed.
    In addition, make sure you use an administrator account when you install TestStand. Finally, you can try to install it on a different computer with the same OS just to make sure the CD is OK. If it works in the other computer, then there is something wrong with the original PC.
    Regards,
    Roberto Piacentini
    Applications Engineer
    National Instruments
    www.ni.com/support

Maybe you are looking for