Layout (flow, grid. matrix, etc)

I am a little confused as how to control 'where' items in my container form will show up.
Here is a link to a [TimeSheetMockUp|http://www.duke.edu/~michaelm/TimeCard/AnnotatedTimeSheet.jpg] that we are designing. My question concerns section 1.
How do I get my fields to 'line up' and play nicely - ideally we would like it to be set up as shown, but close may be good enough. I have a context that represents the 7 elements, and I tried a container form, but none of the layouts produced satisfactory results. Any idea ?
On a broader level, I am hoping to create a component for each of the 6 shown sections and hopefully place them as shown.
( Is this the right approach? )
Thanks in advance...
...Mike .

Hi Mike,
Use transparent Container say TC_PI(Layout-Gridlayout, Coulcount - 3)
then create transparent Container TC1, TC2 and TC3 inside TC_PI with (Layout-Gridlayout, Coulcount - 2)
then insert column vaule to TC1, TC2 and TC3 as per your designing.
Hope this will helps you.
Regards,
Arun Jaiswal

Similar Messages

Tirplets in grid matrix - please help!

Hello All,
I just switched from ableton live and am very pleased indeed , the macbook pro and logic 7 really do go hand in hand! - However one issue i have is that i cannot program triplets in the matrix editor - for example if i have an ultrabeat set up i cant snap the grid[on the channel's midi grid not the inbuilt step sequencer] so that i can do swingy hi hat patterns - on ableton one just presses ctrl+3 and it switches from 16 to 16/t for example but on logic it seems that it just goes 8-12-16 etc
sorry if i expressed my question in a slightly jumbled manner but i'm desperate to get stuck into some nitty gritty drum programing!
thanks in advance!

on th left side of the matrix editor just under the tool box is a small box, the default is 16. change it to 12 for 8th note triplets, 24 for 16

Alternative that does grid/matrix

Hi,
Does anyone know of a platform that does a fillable grid (like a matrix) but allows different formats eg text/number. Jotform you can have only text or numbers.
This is for a timesheet and also a expense form, i'd prefer something like a matrix or grid as it is much quicker and the layout looks much better.
Thanks

Have a look at Oracle note 224270.1 - TRCANLZR trace analyzer tool. Once installed, you can run it from the command line to generate an HTML report to your local client.

Remove delete option from button 'Layout' ALV grid

The ALV grid displays the button to change the layout (global/user specific).
The user can create his/her own layout variant or change it. However, I would like to hide/remove the option 'Delete layout' from the possible options.
Is this possible?
Regards,
Henry

Henry,
Since Layout DELETE button is part of another program, you can't simply exclude it from your ALV grid display.
But, I suppose that layout deletion is possible only from the menu bar using 'Layout Management' and is not possible from the Application toolbar buttons of ALV grid. Also, all other functionalities for layout (new creation, change layout etc ) are possible without using this 'Layout Management' option from menu bar.
So, I think you can meet your requirement hiding the 'Layout Management' option itself simply by excluding it from the grid.
gs_excluding-fcode = '&ERW'.
APPEND gs_excluding TO gt_excluding.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
it_excluding = gt_excluding
BR,
Diwakar

Total amount/qty of columns in grid/matrix

Hi,
Just want to ask if it is possible to put a total amount/qty of a column in a grid or matrix.

Hi,
I tried couple of months, but I didn't find out.
In my end, I add a row manually. You can add a additional row for total or subtotal.
Hyunil Choi.

New starter layouts flow and border

Hi
I am teaching my self Java so I expect this is a simple mistake
set-up a class extending a JFrame
set-up a JPanel with a flow layout
added 5 checks boxes
this worked as I expected with the check box's moving down to the next line
I then changed the code so as to implement my first jpanel as the east panel in a Border layout. This runs ok only the check box's do not move down to the next line.
First question
have I comply misunderstood the section of the book and is it not allowed to put a panel with one layout type in side a panel?
Or
have I made a coding mistake and if so where?
This is my code.
import javax.swing.*;
import java.awt.*;
//THIS IS THE CLASS FOR THE HOLE PROGRAM
public class flowTest extends JFrame implements KeyListener {
public flowTest() {
super("Jeremys Demo");                     // THIS IS THE TITLE OF THE WINDOW
setSize(200, 200);                     //THIS IS THE SIZE OF THE WINDOW
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);     // ACTION FOR THE EXIT x
setVisible(true);                         // MAKE THE WINDOW VISIBLE
JPanel master = new JPanel();
BorderLayout m1 = new BorderLayout();
master.setLayout(m1);
JPanel east = new JPanel();
FlowLayout flo4 = new FlowLayout();
east.setLayout(flo4);
//PANNEL EAST
JCheckBox oneStar = new JCheckBox("One Star", true);
JCheckBox twoStar = new JCheckBox("Two Star");
JCheckBox threeStar = new JCheckBox("Three Star");
JCheckBox fourStar = new JCheckBox("Four Star");
JCheckBox fiveStar = new JCheckBox("Five Star");
ButtonGroup rating = new ButtonGroup();
rating.add(oneStar);
rating.add(twoStar);
rating.add(threeStar);
rating.add(fourStar);
rating.add(fiveStar);
east.add(oneStar);
east.add(twoStar);
east.add(threeStar);
east.add(fourStar);
east.add(fiveStar);
master.add(east, BorderLayout.EAST);
// puts it all in to the main window
setContentPane(master);
// THIS IS THE START POINT
public static void main(String[] arguments) {
flowTest W1 = new flowTest();
}

Stern wrote:
FlowLayout is not designed for this, use GridLayout instead.Agree strongly. Also, you could simplify your code by using arrays. For example:
compare this:
        // PANNEL EAST
        String[] cbLabels =
            "One Star", "Two Star", "Three Star",
            "Four Star", "Five Star"
        ButtonGroup rating = new ButtonGroup();
        for (int i = 0; i < cbLabels.length; i++)
            JCheckBox cb = new JCheckBox(cbLabels);
rating.add(cb);
east.add(cb);
if (i == 0)
cb.setSelected(true);
with your code. Now see which is easier to add a "Six Star" rating?

Difficulty with Tabbed Layout and Grid overlay

I am using a tabbed layout in MUSE and cant find a grid layout to appear so that each tab remains in order with the previous tab when selected.
WhenI select the grid ovelay all I get is a pink overcoating that doesnt have any functionality as far as I can tell.
I want each tab to have its contents in the same place exactly as the previous tab. Different images...same place.

Hi Jon,
I approximated what you want quite easily using the steps below:
Open a New word processor document.
Go File > Page Setup and click one of the Landscape orientation (my Page Setup dialogue shows 2, yours may show only one). Click OK
Go Format > Document... and set the margins to 0.5, 0.5, 0.25, 0.25. Click OK.
In the Ruler, Click the multiple columns side of the Columns button once to make 2 columns.
Press enter (the enter key on the number pad, or in the bottom row of an iBook, PowerBook or MacBook keyboard) to insert a column break and move the insertion point to the right hand column.
Press and hold the Option key and click and hold on the left border of the Right column. drag the column boundary to the 5.75 inch mark on the Ruler. When you release the mouse button, the left margin marker will move to the position of the left edge of the column so you can check it and adjust as necessary.
Click in the left column, and repeat the process, placing the right margin of this column at the 5.25 inch mark.
One caveat: If your printer is like mine (an Epson inkjet), the printer itself will have a minimum bottom margin greater than 1/4 inch (mine is 0.53"). This applies to the physical 'bottom' of the page in Portrait orientation, and has to do with the printer's ability to print to the edge of the page at that point.
And one Note: once you have the columns set up, you might want to save your document (empty, or including material common to each edition) as a Template.
Regards,
Barry

Select rows in custom Grid/Matrix form.

Hi,
I am creating custom Form(Screen) with Matrix Control,
now i want to select row and on click of OK button , i want to set currency values in Standard Sap :B1 Screen Fields(say Landed Cost)
but i am not able to select the rows,
Does anybody knows the code in vb about how to select single or multiple rows in Sap B1 user form(Screen)?
I appreciate your help...
Thanks and Regards,
KaviPrashu

HI,
Thank you so much Thillai, my Problem is solved...
Thanks and Regards,
KaviPrashu

Problem with the List/Album List/Cover Flow/Grid view buttons

Is anyone else having this problem?
I have each playlist/media in different views. I have my music in List view, my podcasts, TV shows, and certain playlists in Album List view, and my movies and music videos in grid view. But now, any view that I select makes it the same for each playlist/media and I have to manually change it everytime I go to one of those lists. I figure this is a glitch with 10.5.3. Anyone else experiencing this?

I'm also having that problem.
It seemed to happen after iTunes 10.5 updates.
I like my music in album list view and my apps in grid form. However, now it's just one view for all lists. Any fixes for this or is this a bug that needs to be ironed out by Apple?

What is the easiest way to create a grid/matrix of images?

We want to create a 'graduation plaque' with a number of students in a grid - like this
http://50.asc.upenn.edu/drupal/sites/default/files/50th%20Anniversary/Students%20and%20Cla sses/1990's/Class%20of%201993.JPG
The source photos are all different sizes. Is there a faster/easier method of producing something like this rather than resizing every image to fit a predefined size and then manually placing them on separate layers?

Contact Sheet II is a Photoshop Plug-in Script writen by xbytor. He is a much better Photoshop Script writer then me I'm just a hacker. Contact Sheet is a much more complicate script then mine for is a Photoshop Plug-in with Photoshop action support. It is also not designed to size all image to the exact same size and aspect ratio if images sizes and aspect ratio differ there will be some variation in images sizes on the contact sheets. The only labeling it will do is place the file names on the contact sheet.
My script is simpler therefor easier to change then Contact Sheet II and my Script is designed to make all image unform in size. My script does not do any labeling but it would be easy to add to a point. My script is also only set up the do spacing the same vertically and horizontally but adding a couple of field to its dialog you could easily separate them but this might not be needed. The hard part would be the labeling for you may want to rotate the roll paper print so it a wide image rather then tall. In which case the labeling would need be set up up rotated and moved the the side of the image which would be rotated because of the tile aspect ratio set up you would make tile have a landscape aspect ratio. Portraits would automatically be rotate for best fit, when you rotate the print they will be orientated portrait. The labeling would need to have at least two options in the dialog, One to do labeling and one for which way you want the labeling done to the side or below. All image processed must have the same orientation otherwise some will be rotated not all or none. Image can vary in size and aspect ratio. But all should be landscape or portrait for the script is designed to rotate image for best fit into tile size.

FF messing with layout simple grid

Why are things not lining up in Firefox? Forgive my grammer
in the code I got sloppy and I've never been to school for this.
Should be a simple layout, just three rows of four
http://www.zilliondollarart.com/pendants.html

You need to clear the float before you start the next row of
divs
All divs with the pendants have class .pendantbox which has
float:left
When you go through the first row of these divs from P100 to
P103, everything works. Before you start the next row of divs P104
onwards you need to clear the left float so that the div containing
P104 floats to the left. So at the end of the div containing P103
you would have
<br style="clear:both">
Similarly after the closing tags of div's containing P107 and
P111 you would need to clear the float.
I tried this and it works in FF1.5
Hope this helps

Fixed Layout option in Web Dynpro for Java personalization

Hi,
i've been searching the forums for an answer on the following topic but couldn't find it so far.
We've adjusted the SAP standard Time Reporting WD Java application (version 6.00 SP15) via the Control-Right Mouse button. To fit the screen in most browser windows we've removed some columns and set others to fixed width. It turned out that not all columns would accept the customized width unless the Fixed Layout option was set to Yes (instead of Not Personalized).
So we have set that option and the result is that also the first column (the one where you can click on to select a row) dissapeared. We've upgrade ESS to version 6.03 SP5 and the application no longer works as before. In order to be able to delete lines from the application you need the first column again. And by disabling the Fixed Layout property this column comes back, also the fucntionality but of course the layout gets messed up again.
The questions I have are: what does the Fixed Layout option do? And is it possible to enable the first column without disabling the Fixed Layout property?
Much obliged
Marcel

Hi
Since screens/view will be differ by its resolution
Better to follow the streamline approach to its content (i.e default 100% not 100px).
I didnt find any fixed Layout option but different layout (ROW,FLOW,GRID,MATRIX)
Are you talking about Table Fixed Layout ?
[Help1|table layout;
[Help2|WD4A table row unselectable;[help3|Table row selector width with fixedTableLayout in 2004s;
Best Regards
Satish Kumar

Placing fields in a position

hi everyone,
U had given right answer but the thing is how can i place these dynamically created input fields in the required position just like (x,y)co-ordinates.
example: top of the screen or bottom of the screen or some other place on the browser. see the below code.
if(firstTime)
              IWDTransparentContainer con=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
          IWDGridLayout layout=(IWDGridLayout)con.createLayout(IWDGridLayout.class);
             layout.setColCount(1);
           IWDAttributeInfo attinfo=wdContext.getNodeInfo().addAttribute("sample","ddic:com.sap.dictionary.string");
          IWDInputField input=(IWDInputField)view.createElement(IWDInputField.class,"textview");
          IWDInputField input1=(IWDInputField)view.createElement(IWDInputField.class,"textview1");
          input.setEnabled(true);
          input1.setEnabled(true);
          input.bindValue(attinfo);
          input1.bindValue(attinfo);
          con.addChild(input);
          con.addChild(input1);
    //@@end
                    KYAN........................

Hi,
You can't specify the (x,y)co-ordinates while placing the UIElements in webDynpro.
You can make use of different kinds of layouts like Grid ,Matrix,Row to arrange your UIElements.
Please go through the help in SDN on different layouts.
Regards, Anilkumar

Bridge CS6 tool tips are blocking the buttons!

When I try to change the layout view (grid, list, etc.) with the buttons on the bottom right, the tool tips appear and I'm not able to click through them. So, basically, when I hover over them, the tool tips are blocking me from doing it.
I look in Prefs for a Tool Tips checkbox and it's not checked right now, but they're still appearing, and still protecting the buttons from being clicked.
Anyone know how to turn them off?
And I have to say this is the most ridiculous problem I ever had with a program. Kinda funny.

I still don't think it's the right checkbox to deactivate interface tool tips as it's in the "Thumbnails" sections of prefs. (And when I switch that on I get tool tips for thumbnails, when I switch it off I do not get tool tips for thumbnails. But the interface tool tips are always consistent.)
Well, I'm again afraid. But this time for my big mouth...
You are very right, I did have a long delay on my machine before the tooltips showed and having the checkbox set to on it seemed directly appearing.
As there are many inconsistencies in Bridge (in fact throughout the whole Suite) this one is very big. Don't have a good alternative short name for it but calling 'show metadata when hovering over' 'show tooltips' is really a very bad approach
The version is CS6 and I'm on a 2009 Mac Pro using 10.6.8 if that matters any.
Thanks, it always matters, especially since this has become a general forum with both Windows and Mac. Different OS and different versions (including detail version number) gives more insight in possible solutions or advice (update etc)
Also, I noticed that if I make Bridge CS6 smaller than the monitor window, then the tool tips over the buttons do not appear over the buttons anymore, but under them instead. The tool tips seem to be set to appear below the mouse pointer. When Bridge is maximized and the bottom of the Bridge window touches the bottom of the monitor there is no place else for the tool tips to go, so they get pushed up... and cover the buttons.
I always have the Dock in sight hence pressing the green button to enlarge my Bridge window to full screen leaves a small free space and as you well discovered has not your problematic behavior with tooltips over buttons.
I would think Bridge should be able to detect the end of the screen, obviously it does because it knows to move the tool tips up so they don't appear "off screen".
They should use this detection to determine if the tool tips should appear above or below (or away from the screen edge) the mouse pointer.
Agreed
I'll stop calling it a bug and switch it to "oversight". Bottom line though is the tool tips still block the buttons and shield them from being clicked.
Oversight is the correct word, but besides the above described improvement they really should get rid of the name tooltips in thumbnails and add an option to really hide or show all tooltips as you would expect in a proper application
Thanks for staying tuned and clarify!
While the Bridge team tries to read most of this forum it might be wise to make a feature request for this, are you willing to do so since this is your discovery?

To send data from a Recordset (DI) to a matrix(grid) of UI.

Hello to all, I am creating a demo, a SQL execute with a Recordset, any problem until the moment, when I want to pass the data to one you GRID (matrix) I don't eat to make it.
it grid it it is an object of UI and the recordset of DI
as I can supplement the DI with the UI.
Thanks.
from Chile.

Hello Francisco,
You also can use the recordset.
oRecordSet = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
        oRecordSet.DoQuery("Select * from OHEM where EmpId < 10")
        SBO_Application.MessageBox("REgistros seleccionados :" & CStr(oRecordSet.RecordCount()))
        oMatrix = oForm.Items.Item("Rejilla").Specific
        oMatrix.Clear()
        If oRecordSet.RecordCount > 0 Then
            oRecordSet.MoveFirst()
            With oForm.DataSources.UserDataSources
                While Not oRecordSet.EoF
                    .Item("Codigo").Value = oRecordSet.Fields.Item("EmpId").Value
                    .Item("Nombre").Value = oRecordSet.Fields.Item("FirstName").Value
                    .Item("Apellido1").Value = oRecordSet.Fields.Item("MiddleName").Value
                    .Item("Apellido2").Value = oRecordSet.Fields.Item("LastName").Value
                    oMatrix.AddRow()
                    oRecordSet.MoveNext()
                End While
            End With
        End If
Un Saludo.
Jose Antonio.

Layout (flow, grid. matrix, etc)

Similar Messages

Maybe you are looking for