LCCS Screensharing- Connect Now pop-up issue
I am trying use the demo of publisher and subscriber at the following location:
http://www.flashrealtime.com/screen-sharing-in-flash-now-available/
scroll down and see subscriber and publisher
I have also tried the sample screensharing on different domain, I have the exact same issue so it is not the LCCS itself but the connectnow add-in issue.
I get the connect now pop-up on my desktop but I can not use it. Supposedly this is where I can select what I want to share-desktop or application. But this window doesn't open when I click on it. It just sits there in the bottom toolbar.
I am using windows 7, premium, x64. I tried in firefox, chrome and IE. Same issue.
I tried uninstalling and reinstalling connect now but same issue.
I posted this thread in "ConnectNow Add" forum also about a week ago. But I haven't received any reply
Hi Charles,
I wanted to point you to a thread I started last week, I think we are having the same issue. Can you confirm?
http://forums.adobe.com/thread/784415?tstart=0
Kind regards.
+LA
Similar Messages
-
Ipad2 losses cell connection now that iOS 8 was installed. Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!
Hey everyone-
Im in the same boat, started a thread . My hands free system worked fine with iOS 8 out of the box new iphone 6. Did the update this morning and i can stream music perfectly fine however i cannot make or receive calls through hands free system.
I have not tried resetting the settings like most people indicate is working. I feel like I shouldn't have to reset anything, even less mess with settings with an update coming from apple. it should "Just Work"
Some people who reset said it works for a few hours, other say it don't work, and I don't know what I should do.
Car: Hyundai Sonata 2014
NOTE: I was able to replicate the issue in my wifes Hyunday Elentra 2013.
This is how I know its not a defect with the BT in my car. -
Access Connections 5 and up issues
Hi,
For years our organization has been using Access Connections 4.52 flawlessly. Recently we purchased a boat load of R500 notebooks. At this point, we were forced to upgrade to version 5.20 as 4.52 will not recognize the wireless card.
With 4.52, when a client would boot up wireless and attempt to login to our network , Access Connections would pop up, then attempt the login only AFTER it has connected to the network. With 5.20, 5.33 and 5.50, this function seems to work ok until I sysprep the image.
After I sysprep our image, this is what happens: User boots up wireless and attempts to login to our network....gets and error stating "OURDOMAIN is not available"....15 seconds later Access Connections wakes up and connects to the wireless network. Now, here is the really dumb part. I can resolve the issue on my image by opening Access Connections > Location Profiles > Select Profile > Edit > OK. Access Connections will now behave properly, until I sysprep.
Is there any solution out there for this? Or even better, is there a way I can make 4.52 work on a newer model. 4.52 did not have this issue.
Thanks
RosyHi,
I cannot see it being fair, to blaim Access Connection for situation, that is clearly not caused by Access Connection.
In the past I was working with multiple corporate images, which I of course had to create, which included syspreping the image. And I can tell you, that sysprepping a 100% working image is always, and I really mean ALLWAYS screwing up some part of the image. If you have been doing images for longer time, then surelly you will be agreed with me.
If you are not, then you have not created enough images manually (I mean starting with the times of RIS, going through WDS, IUB, SCCM .... ).
So much for understanding, where to look when you are looking for the root cause.
So Access Connection is a tool, that depends on other applications and driver. Almost the same as by all other TVT applicaitons. For Access Connection it's highly important, that it's installed in following order together with other tools/drivers:
1) Power Managerment driver
2) Power Manager
3) System Interface driver
4) Hotkey utility/driver
5) LAN Driver
6) WLAN driver
7) WWAN driver
8) Access Connection
It's highly important, that this order is kept.
So back to the imaging, here is what might happen, when you sysprep the image:
- you sysprep it, where some parts (usually ini files) are remoted from the dirver installed on the machine.
- of course you configure the sysprep to load up all the drivers depending on the HW, or some input from the client
- this will load everything back and inclusiv all the drivers
ISSUE:
- WLAN, driver is installed/inicialized after Access Conenction was present in the image
- by syspreping some of the above menitoned applications from Lenovo are taken as drivers and therefore, they are re-installed only after sysprep kicks-in
I'm pretty sure, that you know, how you install you image and by some points you might not be agreed with what I'm writing, but I was working with the informations, that I could find in your description.
I think more description on the sysprep, or the imaging tool and structure might help me imagine, what is goin on.
BTW: I just remembered, that by olders versions of AC 2.x and 3.x when such issue was present, like also LAN was not detected and all this happened after I installed a corporate image, then my fix for the image was quite simple:
Reinstall all the above drivers + apps in the order as you can see it in here .
Cheers -
Is this a dropping connection or a wireless issue....
Hi all,
We've been having some problems with our Infinity setup for a few months now and it's getting a bit annoying, I could use some help in fixing it
So, every evening (could be daytime too, we dont use it then really) our connection seems to drop every 10 mins or so. If I'm gaming, it will drop me out of a game and I'll have to reconnect. I can usually reconnect in seconds. If we're watching Netfilx, it will stop, and restart a few minutes later...
Oddly, the blue Hub lights (HH3 I believe) never falter, solid blue throughout.
Restarting the router (and white box thingy) works pretty much everytime - and only occasionally are we disconnected for more than a few minutes.
The setup is Infinity 2 I think, into the master socket. I'm running a handful of Apple devices, a home server, a Mac and a PS3. Probably important that none of these devices have changed at all location, spec or otherwise.
Occasionally my server cannot be found on the network either, despite it running continuously - a restart usually cures this but would it point to a dodgy router? (it's a wired connection,so no wireless issue)
I'm guessing I need to run some tests but not sure what?
I did try and call BT Support a while ago, but the chap said he couldn't help me because my Mac Air has no ethernet cable, just wirelessseems to me like a faulty router or modem mate, to make sure its not actually dropping fully you will want to login to the router page using 192.168.1.254 then going to troubleshooting and then helpdesk and it will tell you the uptime. login with the password which should be on the back of your router. do this when the wireless next drops. btw dont keep resetting the white modem, it will cause your speeds to drop as it will think its a line fault, just reset the homehub. if the uptime is less then 2 mins then its dropping fully, if its more than than lets say 1 hour for example (and you reset it one hour ago before the wireless dropped) then its most likely just the router being faulty.
-
I can't receive my incoming mail in Mac Mail. ESP is yahoo. Error msg says unable to connect with POP server. Any solution? I am able to get my incoming messages via yahoo website but not through the Mail app.
Try this, if it is not the correct department, ask them for the number or to be transfered..
Call 1-800-318-0612 for Login Help
Also on most autmated systems, if you hit 00000, or ##### you can sometimes get thru to a person.
Is Yahoo your Internet provider? Do you have a local provider? ei:AT&T, SBC, cable co, check who you make your check or epatment to...etc, If so I would start there, but if no joy go to the "Mothership"
I may be wrong about this, (it's been a long time now) I may have deleted my mail account from Mail (after writing down all the info from all General/accounts, and the rest of the tabs, and then added a new account using my existing email address, and it may have "walked me thru the rest of the proceedure".
But like I said it was a long time ago 3-4 years, but that may have been the path I ended up taking, make sure to write all the info down in case you need to re-enter it all manually. Then try calling them.
All the best -
my iphone5,ios7.1.2...itunes. Version 11.3.1.2 ...when ever i connect ..my iphone from my windows computer ....on iphone screen it shows a kind of pop up "THIS ACCESSORY MAY NOT BE SUPPORTED " .....every time when i connect this pop up used to appear on...kindly resolve my isshue
iOS 7 will give errors on non Apple certified peripherals. So make sure you only use Apple certified products. Did you backup the phone and then RESTORE AS NEW (not reset)? Try doing that by plugging the phone to iTunes on a computer. See if that helps. If it solves the problem, there could have been corrupted software on you phone. If not, it could be a hardware issue (including the battery), in which case you would need to go to a Apple Store or authorized service provider.
Use iTunes to restore your iOS device to factory settings - Apple Support -
qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?
For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
For example:
At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
This may or may not assist you but, it hopefully explains how the issue may be happening. -
So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
Can anyone suggest a solution to this vexing problem?
Thanks in advance.Jeremy.Laurin,
have you tried agb76’s approach here? -
Called CL support. No popping/crackling issue with XFI kno
yeah.. after a post by Catherina i decided to post this to make sure you guys see it. If CL closes/deletes this thread they simply acknowledge that they dont want you to know the truth.
i called CL support yesterday around 4ish, and i asked if they got an update on the crackling/popping issue. the reply was "there is no case with popping/crackling issue with XFI that is known". i called again so that i speak with someone else to see if it was the case that only off them was unaware of the situation and got same reply.
the guys attempted to give me the entire troubleshoot again.. i told him i already done all that for the past 5 months bla bla bla.. he offered an RMA with updated firmware... i told him i already got an RMA 2 months ago...
now WTF is going on? are they simply BSing us that they have acknowledged the issue?Z3RO-CooL,
I'm not sure what you hope to achieve by starting this thread and essentially calling us liars. Customer Support have to troubleshoot a problem if someone contacts them. They won't have any new info for you yet. Others may contact Support with similar symptoms but resolve them by doing some of the troubleshooting mentioned.
Everything I have told you here is true, we are investigating this and as soon as I have some information for you I will be posting it here.
I'm closing this thread, not to silence you or because I "don't want you to know the truth", but because this thread was only started to cause an argument and I don't see any constructi've discussion coming from this. Please use the other thread to discuss this particular topic (crackling).
CatMessage Edited by Catherina-CL on 04-05-2006 04:45 PM -
USB over current status detected pop out issue
Hi all
I faced an issue regarding usb over current status detected pop out issue. This popout keep pop out most of the time when i switch on my tv. Even i've try to plug off my cable and swith it on back.
Can anyone of you solve these problem for me....
Regards,
adzleazharFacing same problem as adzleazhar. Have used same laptop connected to 32in TV for several years. Problem only surfaced last month. Unable to resolve. Need help.
-
Although I have been using Google Maps App in India for a while now (without any issues) but I still want to know if there are any plans for launching Turn by Turn Navigation under the OOTB Map App for iOS?
It has been quite a while since Apple came up with Map App of their own and should be releasing improved maps with more capabilities in India.
Cheers!
AbhishekNo one here can answer your question, as there is no one from Apple here, & no one here represents Apple or speaks for Apple.
-
Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )''Pupster [[#question-1041384|said]]''
<blockquote>
Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )
</blockquote>
No idea why, but the problem seems to have resolved its self.. -
In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download. Can I reinstall the app without losing my music?
The obvious way to resolve this on a computer would be to uninstall the app, then reinstall it, however on an iOS device that would cause all the data assoicated with the app to be thrown away.
Make sure your iTunes library has the latest updates for all your apps, then backup and restore the device. This should pull back a fresh copy of the app from your iTunes library and then give it the data from your device backup.
tt2 -
How do I get annoying AI "buy now" pop up to stop opening?
How do I get annoying AI "buy now" pop up to stop opening everytime I open or save a PDF? It's been happening ever since I downloaded a free 30 day trial of the AI software (which has since expired).
When you install files, files and data get written to various system elements on your machine such as your registry and other key places.
When you simply delete an installed file or folder, you are leaving behind all of these things.
When you uninstall, these pieces are dealt with so that they no longer have an impact on the operation of your system. -
I can't receive messages, I keep getting the message "connecting to POP.verizon"
Any time I try to receive messages, I get the notice at the bottom of the page that it's connecting to POP.verizon.net. However, it never connects and I have no idea how to receive messages. I have tried several different troubleshooting solutions, but with no success.
https://support.mozilla.org/en-US/kb/problems-sending-and-receiving-messages
You didn't mention what exactly you tried already.
Maybe you are looking for
-
I had put my 3G sim in one IPAD 2 for testing. After 2 days I put the sim in my own IPAD 2 , but it does not accept/read the sim. Kindly advise ???
-
Please help, Cant install bluestack on macbook pro
it wont install.... already download twice from bluestacks.com same result, failed to install
-
Hi, I have a query regarding creating a new Interface based on an existing Interface. here is the scenario, I have an existing Outbound Interface A from SAP PO IDOCs ->XI-> third Party A SAP sends IDOCs whenever POs are created / changed and XI conve
-
Regarding partition table..pls help
I am creating a table as CREATE TABLE T3 PARTITION BY RANGE(CREATED) (PARTITION T1 VALUES LESS THAN (TO_DATE('01-APR-2006','DD-MON-YYYY')), PARTITION T2 VALUES LESS THAN (TO_DATE('01-JUN-2006','DD-MON-YYYY'))) AS SELECT * FROM T1 am getting error : O
-
I had photoshop cs6 installed on my home pc running on windows vista. I have since updated the software to windows 7 and would like the photoshop cs6 installed back on the computer. The problem is photoshop came pre installed on my computer when i bo