LCR_LIST_BUSINESS_SYSTEMS in the sldcheck
Hi forum,
I am just setting up an SLD... everything works fine, just when I am doing an sldcheck I get this error:
SLD server access settings:
host name: XXXXXXX
port number: 50100
user : myUser
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
All other checks are successful.
Any ideas where to search for the error.
ThankX!
Thanks for your replies! I am still facing the Problem. A clearing of the cache didn't solve my problem.
SLDAPICUST is configured... but my user is called xi_user, not xiappluser. Might this be a problem?
When using SXMB_ADM for config. the integration engine a lookup on the sld fails with the msg "No access to system landscape at present".
When running in rz70 the data collector I get an error too:
0: cifesap005_C05_01 : Execute program: _SLD_APPL_SERV
0: cifesap005_C05_01 : Execute program: _SLD_BCSYS
0: cifesap005_C05_01 : Execute program: _SLD_CLIENT
0: cifesap005_C05_01 : Execute program: _SLD_COMPSYS
0: cifesap005_C05_01 : Execute program: _SLD_DBSYS
0: cifesap005_C05_01 : Execute program: _SLD_GWSRV
0: cifesap005_C05_01 : Execute program: _SLD_INSTSC
0: cifesap005_C05_01 : Execute program: _SLD_INSTSP
0: cifesap005_C05_01 : Execute program: _SLD_IPSERV
0: cifesap005_C05_01 : Execute program: _SLD_MSGSRV
0: cifesap005_C05_01 : Execute program: _SLD_ASSOC
0: cifesap005_C05_01 : Collection of SLD data finished
0: cifesap005_C05_01 : Data collected successfully
0: cifesap005_C05_01 : RFC data prepared
0: cifesap005_C05_01 : Used RFC destination: SLD_UC
0: cifesap005_C05_01 : RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'
0: cifesap005_C05_01 : Test mode: No batch job created
Similar Messages
-
Hi all,I had a sldcheck error,the log:
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_DXP
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: dsapxprd
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DXP
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
Who can help me?Hi,
ask your basis guys to check if PIAPPLUSER is not locked in XI......if it is locked, then unlock it......
check SLDAPICUST if it is having the XI details correctly to access SLD............
if your PIAPPLUSER is getting locked frequently, then ask your basis guys to change the password of service users in XI using the OSS Note for password change of service users..........
Regards,
Rajeev Gupta -
HI All,
We are trying to connect ECC6 to PI7.0.Getting the below error.
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Have done all the possible config mentioned in the guide.Can anyone please mention how to resolve the issue.Thanks.Hi,
Please search on SDN you will find ample of threads for this issue, here are few of them:
[SLDCHECK Error;
[LCR_LIST_BUSINESS_SYSTEMS in the sldcheck;
[Re: Error on SLDCHECK;
and many more on sdn or google
Regards,
Rahul Grover -
ERROR MESSAGE IN - SLDCHECK.
When i run the transaction SLDCHECK , i get the following error message.
>
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Please let me know the importance of the customizing in transaction SLDAPICUST. ( all the parameters specified here).
should the user specified here have access to SLD?. I am asking this because i end up getting the below error message when i debug the Function module
LCR_LIST_BUSINESS_SYSTEMS from the application system
>
AbapSLDRequestHandler.getObjectServer(): User cred
entials are invalid or user is denied access
>
And below error message when i debug FM LCR_GET_BS_DETAILS in the
application system.
>
exception in SLD client: AbapSLDRequestHandler.execEnumerateInstances(): User credentials are invalid or user is denied access
>
Any help would be appreciated.Go through this
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Configuration/Post_Install_SLD_NW_2004s.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
Regards,
Sarvesh -
hi all
I have installed XI3.0 and created business scenario(R3 4.7 * 110) but during call of SLDCHECK transaction it gives me the following error and doesn't connect to SLD.
Properties of RFC destination LCRSAPRFC
RFC host: %%RFCSERVER%%
program id: LCRSAPRFC_EC1
gateway host: exxept01
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server address settings:
host name: 10.147.250.9
port number: 50100
Use transaction LCRSERVADDR (XI 1.0) or SLDAPICUST (XI 2.0) if you wish to maintain the SLD server address
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Clearing the local SLD cache
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
....I've search topics, notes and sdn contents and found nothing on duplicate conversation ids . if anybody has any idea what could be causing this please let me know!
THANKS
nelsonHi Chilla
I finished according to your guide, but it didn't help solve the problem.
I'd like to write down my configuration and content more clearly as follows:
1、configuration of R/3 role
SXMB_ADM-〉Configuration Data(Integration Engine)
Role of Business System: Application System
Corresponding Integ. Server : http://10.147.250.9:8001/sap/xi/engine?type=entry
other field is empty.
but a mistake is made when testing, it says "No access to system landscape at
present" .
2、Connecting to the Integration Server
RFC destination : INTEGRATION_DIRECTORY_HMI
con type : H
Technical Seeting tab
Target Host : 10.147.250.9
PathPrefix : /dir/CacheRefresh
Service No. : 50100
Logon /Security tab
Logon Procedure : Basic Authentication
SSL : Inactive
language : en
Client 001
User : Pisuper
password : ***
the user and key are already created in the Integration Server with related 权限,but
when the sysytem is executing the "test Connection",there is dialogue box, and i fill
in the blanks as follows:
Resource dir
Client 001 (Integration Server clinet)
User name pisuper
Password ***
Language EN
but a mistake of HTTP/1.1 401 Unauthorized is made when i dial the enter key.
3、I created a service connected with default_host->sap -> xi -> engine and set it as
Activate Link
4、Registering Queues
5、Connecting Non-Unicode Business Systems has successfully being created LCRSAPRFC、
SAPSLDAPI and the testing is also passed.
6、connection created by Tcode SLDAPICUST is as follows:
Alias : SAP_CONFIG
Prim : (CHECKED)
HostName: 10.147.250.9
port: 50100
user: PISUPER
Password: ******
7、when executing the SLDCHECK,i could logon sld, but problem arising as follows
Properties of RFC destination SAPSLDAPI
RFC host: %%RFCSERVER%%
program id: SAPSLDAPI_EC1
gateway host: 10.147.250.9
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server address settings:
host name: 10.147.250.9
port number: 50100
Use transaction SLDAPICUST if you wish to maintain the SLD server address
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Testing the SLD API
SLD API ping was successful
Clearing the local SLD cache
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
EC1_106
YH0_800
EC1_001
ZDH_900
EC1_105
Calling function LCR_GET_BS_DETAILS
Retrieving data from the SLD server...
Function call returned exception code 5
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
p.s:the client created on the base of XI3.0 platform is successfully tested and
executing the own example . -
Could not open the ICU common library
Dear all,
I’ve done heterogeneous OS migration on our Solution Manager system release ver. 7.0 Ehp1, from HP-UX 11.31 to RedHat 6.5. Then we need to perform the system upgrade to version 7.1
Kernel version is SAP Kernel : 720_EXT_REL.
Database Client Library : OCI_112, 11.2.0.3.0, V1, default.
created in : Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116
ICU Version : 4.0.1 Unicode Version 5.1
Everything is working fine. EarlyWatch reports are prepared. But when I checked the SLD http://saptst:54000/sld I’ve got the error “Internet
Explorer cannot display the webpage”. I also checked with IP address and it’s the same error.
With Chrome browser the error is “Oops! Google Chrome could not connect to saptst:54000”
I checked the SLDCHECK and got:
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_SMP gateway host: saptst
gateway service: sapgw40
Testing the RFC connection to
the SLD java client...
RFC ping was successful
SLD server access
settings:
host name: saptst
port number: 54000
user : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function
LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
SAPSLDAPI RFC is working fine.
But on the putty connection with the server I’ve got “Unknown function module: Function SLDJAVA_ACCESSOR_REQUEST not found”.
I’ve checked the std_server0.out file in the work directory:
Could not open the ICU common library. The following files must be in the path described by the environment variable
"LD_LIBRARY_PATH":
libicuuc.so.30, libicudata.so.30, libicui18n.so.30
[nlsui0_mt.c 1620] pid = 3079
LD_LIBRARY_PATH is well set in environment of the smpadm user.
The RFC libraries in the /sapmnt/SMP/exe, /usr/sap/SMP/SYS/exe/run, /usr/sap/SMP/SCS01/exe
and also in /usr/sap/SMP/DVEBMG40/exe are
libicudata.so.34
libicudata.so.40
libicudecnumber.so
libicui18n.so.34
libicui18n.so.40
libicuuc.so.34
libicuuc.so.40
There is no libicuuc.so.30, libicudata.so.30, libicui18n.so.30.
I’ve also downloaded the last kernel patches, unpacked and checked the RFC libraries, but there were no libicuuc.so.30… with number 30.
Why the system is searching for these libraries with 30, but not 34 or 40?
Can you please help how to solve the error “Could not open the ICU common library”?
Is this the problem why I can’t open the browser http://saptst:54000/sld and I got the error “Internet Explorer cannot display the webpage”?
Thank you in advance.
Best regards,
RuzicaDear all,
I've tried to deployed Java with:
SAPJEE10P_5-10003469.SCA
SAPJEECOR10P_19-10003466.SCA
SAPJTECHF10P_21-10003468.SCA,
but the file for the SAPJTECHS, SAPJTECHS10P_26-10003467.SCA finished with the
error again for "Could not open the ICU common library.
The following files must be in the path described by
the environment variable
"LD_LIBRARY_PATH":
libicuuc.so.30, libicudata.so.30, libicui18n.so.30
The deployment failed with the following error:
Starting Deployment of SQLTrace
The SDM will now start SAP Web AS Java instance processes in order to perform online
deployment. After that the deployment will proceed.
It could take some time, so please be patient.
Aborted:
development component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0', grouped by :SDM could not start the J2EE cluster on the host saptst! The online deployment is terminated. A timeout occured during the cluster running verification. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment of SQLTrace finished with Error (Duration 1801206 ms)
Starting Deployment of SAP_JTECHS
Aborted:
software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.10.26.20121031152700''/'0':Failed deployment of SDAs:development
component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0' :
aborted
Please, look at error logs above for more information!
Deployment of SAP_JTECHS finished with Error (Duration 918 ms)
I've tried:
#cd /usr/sap/SMP/DVEBMGS40/SDM/program/
#./StopServer.sh
#./sdm.sh jstartup mode=standalone
#./sdm.sh j2eeenginestartstop timeoutmillisec=1800000
#./sdm.sh jstartup mode=integrated
#./StartServer.sh
But still the error "SDM could not start the J2EE cluster on the host saptst" appeared again.
Can you please advice what should I do to deploy the SAPJTECHS10P_26-10003467.SCA ?
Thank you in advance,
BR,
Ruzica -
Hi Experts,
My SLDCHECK is Fine Up to Yesterday.
Today Suddenly It's Not Working. It's Saying the Following Error.
Please find the Error Attachment.
http://rapidshare.com/files/40556304/SLDCHECK.jpeg.html
Please let me Know What to Do Now
Regards
KhannaHi Sridhar,
Thanks For Your Help By Providing the details Of the JPEG To All.
Login is possible with the PIAPPLUSER.
I Checked With the TC SLDAPICUST-----Primary Check box is Checked For the USer PIAPPLUSER.
Here is the Result of the SLDCHECK in the Screen shot
<b>Properties of RFC destination SAPSLDAPI </b>
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_PNW
gateway host:
epnwsrv
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
<b>RFC ping was successful </b>
<b>SLD server access settings: </b>
host name: epnwsrv
port number: 50100
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
<b>=> Verify in the browser GUI that the SLD is in a healthy running state! </b>
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
<b>Function call returned exception code 4 </b>
<b>=> Check whether the SLD is running! </b>
<b>
Summary: Connection to SLD does not work
=> Check SLD function and configurations </b>
Now checking access to the XI Profile
<b>Properties of RFC destination LCRSAPRFC </b>
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_PNW
gateway host:
epnwsrv
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
<b>RFC ping was successful </b>
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
<b>Function call terminated sucessfully </b>
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
<b>Summary: Connection to the XI Profile works correctly </b>
Please Help me
Regards
Khanna -
Error when reading the ID of the business system from the SLD
Hi,
I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
What could have gone wrong. Thanks in advance.
SriniHi,
:::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
1) SAP_XI_Developer_ABAP +
2) SAP_XI_Developer_J2EE +
3) SAP_XI_MONITOR_ABAP +
4) SAP_XI_MONITOR_J2EE +
5) SAP_SLD_ADMINISTRATOR +
6) SAP_XI_BPE_MONITOR_ABAP +
7) SAP_XI_DEMOAPP
8) SAP_XI_DISPLAY_USER_ABAP +
9) SAP_XI_DISPLAY_USER_J2EE +
Regards
Sesh -
Error in IR Namespace is not defined in the software component version
Hi All,
Please provide your valuable inputs to resolve the issue.
Namespace http://xxx.com is not defined in the software component version xxx_xxxxxx , 1.0 of xxx.com
Though the software component was already created in SLD and imported.All the developers were able to access the software component and create the Namespaces for their scenarios, but when tried to Activate the scenario above mentioned error is displayed.
Below are the checks done.
1.In Exchange Profile checked the properties,
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
2. Tried to import the software components once again through IR -- No results
3. Restarted the Java Engine through SMICM -- No results
4.Performed the SLDCHECK no errors.
Inputs please at the earliest
Regards
Shiva.Hi Jochen,
This is occuring due to that the created namespace is not getting activated. As mentioned in earlier replies that if you have copied objects from somewhere else then all the related information should also be copied. If the problem resists then you can create all the needed objects in IR again and activate it separately instead of activating all at once.
Regards,
Subhasha -
SLDCHECK for Non-XI/PI system??
All,
I have connected my Abap systems to my SLD and am successfully updating the data every 12 hours. However, I am running the test SLDCHECK on my ABAP systems and getting errors with the LCR Function Module. I have gone through the troubleshooting document mentioned in several SLDCHECK threads, and cannot find any issue. On my non-XI/PI Abap systems, do I need to make sure SLDCHECK runs clean? I plan on implementing E2E diagnotics in SMG. Or does the SLDCHECK only have to run successfully for XI/PI systems?
Plentiful points for helpful gurus!!!!
Thanks,
JeffRZ70 is all you need to do to connect ABAP to SLD. SLDCHECK is for Exchange Infrastructure.
-RK -
hi all
After we implemented SAP 700 Kernel 159 in our PI system, the SLDCHECK takes atleast 5 minutes to get a display, the Jco RFC connections also seems to be afftected .
have anyone encountered this error .
Thank you
Jonu Joyhi all
After we implemented SAP 700 Kernel 159 in our PI system, the SLDCHECK takes atleast 5 minutes to get a display, the Jco RFC connections also seems to be afftected .
have anyone encountered this error .
Thank you
Jonu Joy -
hello all -
i have the XI J2EE WEBAS running on client 001 and the ABAP stack running on 010 ( XI's own business system i guess). SLD Server is on CRD client not on XI.
Now when i do an sldcheck in the calling function <b>LCR_GET_OWN_BUSINESS_SYSTEM</b>, when it retrieves the data from SLD Server....i would see the business system associated to system XID as
id = XID_001, Shouldn't it be XID_010?
In SLD too, the business system associated with XI is configured as XID_010 though the XI Server/engine is running on XID_001?
Let me know if you have any suggestions.
Thanks,
TirumalHi Tirumal,
From your query what's understood is that in your CRD client, when you execute the SLDCHECK you are facing this error LCR_GET_OWN_BUSINESS_SYSTEMS. Pls do check in SLDAPICUST transaction whether the user id and pwd used is correct. pls do used XIAPPLUSER.
Also refer the config. guide to get the proxy connected to XI.
Cheers
JK -
Adapter framework failing to send message
Hi,
I am facing an issue in XI, where the adapter framework is getting failed to send the message. The message is also not getting reflected in SXMB_MONI,
"Transmitting the message to endpoint http://server:8080/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 404 : Not found."
No service using the ICM port 8080 is working though active. No XI service, even the ping service in sap/bc/ping is not working.
I have checked the following:
1) SLDCHECK (browser opening properly). In ABAP part i am getting error
Use transaction SLDAPICUST if you wish to maintain
Launching the SLD GUI in a separate browser window.
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
for troubleshooting the above error i have gone through the link
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
Still the problem persists while calling function LCR_LIST_BUSINESS_SYSTEM
2) Then i checked the ping (path - http://server:8080/sap/xi/engine?type=entry ) -- its also not running and showing error :
Service cannot be reached with error code 404 not found.
3) The RFC XIINTEGRATION_SERVER is showing also showing error 404.
4) Checked ICM port - its 8080
Inspite of working hard over this issue, still unable to resolve this issue.
Please help me. Awaiting for your helping suggestions
Thanks in advance..> Still the problem persists while calling function LCR_LIST_BUSINESS_SYSTEM
> 2) Then i checked the ping (path - http://server:8080/sap/xi/engine?type=entry ) -- its also not running and showing error :
> Service cannot be reached with error code 404 not found.
>
> 3) The RFC XIINTEGRATION_SERVER is showing also showing error 404.
> 4) Checked ICM port - its 8080
>
have a look for LCR_LIST_BUSINESS_SYSTEM in the below link
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
Regards,
Sarvesh -
500 Internal Server Error : java.lang.NoClassDefFoundError in XI - SLD
Hi Friends,
We have upgraded the NW2004s java sp level from SP 04 to SP 05. But after doing so we are getting the following error while accessing the System Landscape Directory from the following link
"http://host:port/rep/start/index.jsp"
The error description is as below
"500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator.
Root Cause
The initial exception that caused the request to fail, was:
java.lang.NoClassDefFoundError: com/sap/lcr/pers/jdbc/CRQMappedJdbcJ2EEPoolPersistence
at com.sap.sld.wd.main.MainView.checkHealthyServer(MainView.java:423)
at com.sap.sld.wd.main.MainView.wdDoModifyView(MainView.java:152)
at com.sap.sld.wd.main.wdp.InternalMainView.wdDoModifyView(InternalMainView.java:893)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:282)
... 28 more
Correction Hints
It can't be determined from the exception chain, which class loader failed to load the above class. But at least the class loader of the current application does not contain a resource with name 'com/sap/lcr/pers/jdbc/CRQMappedJdbcJ2EEPoolPersistence'.
If I click on the SLD onthe SAP Netweaver - Exchange Infrastructure, I am getting the above error.
Pls help me to solve this problem.
Thanks in advance
PurnenduHi Sridhar,
Thanks a lot for your reply.
I can launch the transaction SXMB_IFR. It works fine. I got the XI frontend with Exchange Infrastructure Tools.
But when I click on the SLD I am getting this error.
I have also tried to open the http://<SLDserver>:<port>/sld link. But this is also giving me the same error.
I have checked the SLDCHECK transaction.
I am copy/pasting some part of the Check result for reference.
""Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations""
I have checked the following thread
XI-SLD & IS configuration
But the solution provided in the thread "configure the hostname without any domain with transaction SLDAPICUST" doen not work.
By the way how to check whether SLD is running or not.
Thanks in advance and warm regards
Purnendu -
Hello all,
when trying to execute a synch Soap Request I get the resposnse message:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What does this error message mean? What do I have to do to dix this?
Thanks & regards,
KarstenThanks to all your replies.
The first SLDCHECK gave error for LCR_LIST_BUSINESS_SYSTEMS, but the second check showed the following (green) result:
<i>
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_UNI
gateway host:
ld0508
gateway service: sapgw18
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: ld0508
port number: 51800
user : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
QPT_022
SIT_000
QXC_320
Q3I_940
Q75_003
CLIENT_410_EAR
EhP2USFED
(...more...)
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
Function call terminated sucessfully
Properties of own business system associated to system PSQ client 300
id = PSQ_300
role = LOC
Calling function LCR_GET_BS_DETAILS
Retrieving data from the SLD server...
Function call terminated sucessfully
Details of own business system PSQ_300
caption = PSQ_300
product =
IS-URL =
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_UNI
gateway host:
ld0508
gateway service: sapgw18
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly</i>
But again the response message:
<i>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
Any further hints?
Thanks & regards,
Karsten
Maybe you are looking for
-
How can i set up different ring tones for email accounts?
Hello all, I have about 6 different email accounts on my iPhone. From exchange server (work email) to my personal yahoo and google accounts plus my personal business account. Is there a possibility to set up different ringtones for each of the emai
-
Office Web App error - unable to open PDF after multiple trials
Hi, we are using Office Web App server 2013 on win server 2012 (NO Sharepoint installed) to preview files (doc, docx, pdf, xls, xlsx, ppt, pptx), OWA is set as http, wopihost is http as well under different from HTTP80, HTTP809 application pool File
-
Code review : why table name is invalid
Greetings all, I have written the following code to check if any column is null for all rows in a table. I'm confused as to why the column name is recognized but not the table name. If the table name is hard coded, executes. Any and all assistance is
-
Intercompany billing involving three countries
Hi, I have an intercompany scenario involving three countried. A customer from Romania placed an order on Hungary but the goods are delivered from Poland. We have complaint with tax codes and after investigation we cam eto the conculsion that it coul
-
Do we require 2 FIM Licence if installing FIM portal on 2 servers for HA
Hi, We are installing FIM portal on 2 windows servers for achieving HA. Please help by sharing will it cost us two FIM Licence to do that. Thanks, Varun