Lean-WM Stock Transfer

Hello,
Is it possible to have stock transfers from one storage location (lean-wm active) to another storage location (lean-wm active)? I tried to make a transfer with MB1B but this requires to set up additional movement types for lean-wm (e.g. movement type 312) and also storage bins. The requirement is to only use MM-IM and no WM inventory. I found one note from SAP that said a delivery should be used. But when I create a delivery I get other error messages.
The only reason why I have to use lean-wm is because we use scanner in the warehouse and the standard SAP interface for scanner is SAPConsole. But somehow the functionlity is very limited.
Can someone help and explain to me how I can make a stock transfer within the same plant between two lean-wm active storage locations?
Best Regards,
Jenny

Hi Jenny,
Could please let me know how you solved the issue. I am doing stock transfer from SLoc(Not active LWM) to Sloc LWM.
It would be help if you give give steps to configure.
Thanks&Regards,
Chand

Similar Messages

Stock transport order v/s stock transfer order

Hai
What is stock transport order and stock transfer order?
Is there any difference?
If so what is the basic difference?
What are SD configurations needed for configuring Stock transport order and stock transfer order
Regards
Raja

Hi,
A. STO is stock transfer order.it is used when stock is transferred from storage location to storage location or plant to plant..
Configuration Settings:
1. Create Internal Customer
2. Create Vendor (Transport Agent) 3. Set up Stock Transport Order by going to IMGMaterials ManagementPurchasingPurchase Order Set up Stock Transport Order
B.there is no stock transport order in SAP. it is Transport Order which will be used in automatic picking..whenever goods shoul be picked from ur warehouse TO is used..
Logistics execution->shipping>picking>lean wm-->there u can find number ranges for TO.
u can create TO by using T-code LT03...
Hope it will clarify ur doubts..
regards..
yogi..

Report for Missing qty in stock transfer

how to Create a Missing Quantity list that gives the difference between sent and received quantities during Stock transfer. and send me tables involved in that, primary keys also

suppose, if we transfer goods from plant to plant or St loc to st loc with in one plant, if some goods missed due to some problems, i need that info.
diff beteen sending stock of plant 1 and receiving stock in plant2
Where can i gte all this fields

While doing J1iex In case of Stock Transfer Duty is Getting Inventorised

Dear Experts,
In case of stock transfer of capital goods between 2 plants, when we are doing J1IEX (for the receiving plant) and tick the u201Ccalculate excise duties based on ratesu201D, the system copies the credit due amount to inventoried duty.
Due to this the total duty becomes sum of credit due and inventorised duty.
Why is the system copying the credit due amount to the inventorised duty in case of stock transfer only
Edited by: Burzes Batliwalla on Jun 13, 2011 7:17 AM

I am also checking this out with Burzes .Everything is ok with conditions,if we donot click "calculate excise duty based on rates" . Nothing is inventorised.
But problem starts when we tick "calculate excise duty based on rates" and duty gets Invetorised.
which is
Recalculate Excise Duty
Recalculates the excise duty on the item.
Procedure
Select this indicator if you change any of the excise duty rates in the above fields. Then press Enter.
The system then recalculates the excise duty amounts accordingly.
Why is this happening.
Anyone can send some useful suggestions

Error in MIGO durng intra-company stock transfer by STO

Dear gurus,
I am facing an error while posting MIGO during intra-company plant to plant STO.
Settings for STO:
SPRO >IMG > MM >Purchasing > Purchase Order>set up Stock Transport Order
Define Shipping Data
Define/assign Checking rule
Assign Delivery Type
Assign Doc type
I have maintained the following pre-requisite master data
1. Supplying/Receiving plants are created as customer/vendor master
2. Excise details (customer/Vendor/Plant) data are maintained in J1ID
3. Assessable value is entered in J1ID
Process flow:
1. ME21n - Create STO (PO type:UB)
2. VL10B - Create Outbound Delivery
3. VL02N - PGI
4. VF01 - Create Pro-forma Invoice (Stock Transfer Invoice)
5. J1IIN - Post Excise Invoice
at the receiving Plant
6. MIGO-Post Goods Receipt.
After entering the excise invoice and clicking on CHECK buttin in MIGO, the following errors are appearing
1. Excise Details are not maintained for Vendor .-Message no. 8I565
2. Maintain Vendor for the excise invoice -Message no. 4F185
3. Please check excise base for the item is zero ! -Message no. 4F121
Please reply your valuable suggestions.
Regards,
Anbu

Hi Anbu..
Post Migo without excise entry and try in J1IG to post the excise invoice.
In J1iG..enter material doc of GR ,Excise invoice no from Manufac plant,check own plant and
Click Details to get the excise values as in excise invoice.
Hope this works !!
Thanks
R.Kannan,

Stock transfer PRs are not getting created in APO

Hi,
I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
In CIF post processing these PRs as stuck and I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
How to de-bug this post processing queue to see what is missing in vendor master data?
regards,
shan

Hi
Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
You need to have a purchasing info record(ME11) linking your material and the source plant B.
I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
When you transfer the purchasing info record, system automatically generates the external procurement relationships with source location as plant B, destination location as plant A and info record reference.
When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
So in essence you have to check if all the above things are done by the system.
Hope Im clear in this
regards
Mohan V R Chunchu

Urgent Condition Tab Missing In Stock Transfer Order

Hi All ,
When I a m creating Stock Transfer Order from One Plant In one Company Code to Another Plant in another Company code the Invoice and Conditions Tab Is Missing .
How to get the Conditions tab, Do I have to do any Customization ?
Please suggest me of how to go about .....
Regards ,
Sriram.

Hi Srirama,
Yes, if you have only one Calculation schema then there is no meaning in assigning to different Porgs.
In that case please proceed with the following configuration.
This is done in customizing; IMG for MM > Purchasing>Conditions>Define Price Determination Process>Define Schema Determination>Determine Schema for Stock Transport Orders
For the combination of the Schema POrg; doc.type( UB ) and Supplying plant
you must specify the price schema to be used.
Hope this will solve your problem.
Regards,
DilliB

GR no & GR date in stock transfer report

Hi, Team
we have developed report for stock transfer (from plant to Depot) in that up to Dec-12 all the relevant information showing correctly but if i run the report for the period 01.01.2013 to 30.01.13 all the Excise details i.e. Excise invoice no,Ex inv date, BED, GR no & GR date data showing blank
i inform this to our ABAP consultant for this error and he replied that due diff. in period in FI & MM this data showing blank and after April-12 this data showing correctly .
so kindly advice me how to resolve this issue
attaching report screen shot for ref.
pl find below details
Input :-
Material
Plant
Receiving Plant
Posting date (From- to)
Thanks
Paramanand Shinde

Hi Sridhar,
So, do you mean I need to take MSEG(BWART-Movement type field) first, and then MKPF(BUDAT-Posting dt) ?
Thaks in advance,
Irfan.

Missing pieces during stock transfer

Hello folks!
I have a typical problem. i guess if u have worked for domestic deployment project, u wouldnt laugh!!.
Well, i make a 2-step plant to plant stock transfer, say with 100 pieces. when i complete the stock transfer at the receiving plant, i find 2 pieces missing, how would system accommodate this loss?? it would constantly display the material as in transit.
(the great Indian Scenario : There are thefts happening in the broad day light in the name of OCTROI. There WILL be a problem in the documents u r carrying with the goods at any given time unless u r ready to part with one or two pieces of what u r carrying. now there are 2 pieces with barcocdes are missing. how to destroy these barcodes legally. so that audit person has no problem with it/ or we have sufficient documents duly signed by the senior most employee in the client company to show why these barcodes have been destroyed)

Hi,
SAP suggest the following:
1) either receive the missing parts and scrap them in the receiving plant or
2) receive in the receiving plant and make a return STO to the supplying plant and scrap there.
MdZ

Required Standard report for Deliveries Made vs Stock Transfer POu2019s

Hi,
Is there any standard report for Generate Daily Report detailing Deliveries Made vs Stock Transfer POu2019s...
Plz help.

Hi,
Using MKPF table take all material document, then usign the doc no (mblnr) take data from MSEG table
with movement type 641 and 642 in case of reversal (STO). 101 and 102 for (Delviery) .
take STO po of above movement type from table EKPO with PSTYP (item cat, field ) = 7. Comparing sto and delivery details and you will get the output.

Authorization for certain warehouse in stock transfer

I'm trying to create an authorization for stock transfer when To Warehouse equals a certain value. Is there a way to do it?

Hi,
How could I do it with an approval procedure?
You can create approval stages and template by using query
Is it with a query?
Yes
Will it be similar to a formatted search?
Yes
Try this query for row level with only one item.
Select Distinct 'True' FROM OWTR T0 inner join WTR1 T1 on T0.docentry = T1.docentry
Where $[$23.5.0] = 'ExScrap'
Note: Replace Exscrap with your warehouse name.
Thanks & Regards,
Nagarajan

Vendor code in Stock Transfer Inspection Lot(08)

Hi Everybody,
I have noticed that when a Stock Transfer lot is created, the 'Data for lot orogin' tab in the Inspection Lot shows Vendor code in 'Data for goods receipt' section at times and at times Vendor code is not included in this section.
Please throw some light on the situations under which the vendor code is included and excluded.
Regards,
Manish.

I can't say for sure but I would compare the triggering document. I.e. Exactly what material movement is used in each case and what type of document triggered it, (I.e. an STO order). Than look at those documents and see if and why a vendor number is available.
FF

Pricing Procedure in stock transfer orders

Hi
I have a standard cost material which is to be stock transferred from one plant to another. (std cost in both plants). In this movement, I need the accounting document to generate an accrual to another account for Royalty that has to be paid at a later date to government.
This is not a delivery cost for which I will do any invoice verification. It is only an amount to be accrued to this account for every movement.
Example: Material at 10/- std cost in supply plant, 12/- std cost at receiving plant, when I am moving 1 unit, accounting normally will have cr inventory supply plant 10/-, dr inventory receiving plant 12/- and price difference 2/-.
Assuming a royalty of 1/- per unit, the above accounting should have an additional entry cr 1/- Royalty account.
I tried using stock transfer pricing procedure with a condition for Royalty (not delivery cost condition) with account key. But it is not hitting the royalty account.
Can some one suggest how to setup the pricing procedure in such case for stock transfer?
Greatful for any help.
Sriram

Hi
Any suggestions?
Thanks
Sriram

The Problem in stock transfer module

Hi, experts
The scenario i as follows:
I add a new doc using the stock transfer module to adjust the stock qty in the two Warehouse.
but get the error
G/L account is missing [stock transfers-rows-warehouse code][line:1]],'19973'
Appreciate any suggestion.
Best Regars
Eric Wang

Please check if you have set the following accounts in the ItemGroup G/L Settings
Inventory Offset - Decrease
Inventory Offset - Increase
Also, Check this link which explains the variuos stock accounts in B1.
PDF File:
[https://websmp101.sap-ag.de/~sapidb/011000358700006406532006E/CW46_LOG_StockAccounts.pdf]
Webex Recorded Session
[https://websmp101.sap-ag.de/~sapidb/011000358700006406542006E/CW46_LOG_StockAccouts.wrf]

Delivery Split in Stock transfer Order

Hello gurus,
In Stock transfer order process, Delivery has been split. In purchase order we have two materials, while creating delivery in VL10B System is splitting the deliveries and creating two delivery no. instead of one delivery. I checked everything but i could not reach out the solution. can you tell me what could be reason for this delivery split in Stock Transfer Order Process.
Regards
Soumendu

SAP have provided a report ZLE_ANALYZE_DELIVERY_SPLIT in note 355404.
This report tells you exactly what is causing the split by highlighting the cause in red. It does not make any change to the database on your system (i.e. no changes are made on your system). I would recommend you implement this report.
Often, I have seen the delivery time being the cause of a delivery split. So check the values of LIKP-LFUHR for each delivery. But the above report would tell you exactly.

Lean-WM Stock Transfer

Similar Messages

Maybe you are looking for