Leave Approval Notification

Hi Experts,
i have a requirement in which i have to change the E-Mail notification addresses as per the employee Personal Area once the leave is approved.
Once the leave is approved the notification should be sent to respective HR Teams .
As example: for personal area INM3- notification should go to hr@*com
                   for Personal Area INM4 - notification should go to hr12@*com
I tried looking at table V_T554S_WEB  but there is no options there for Email notification.
Can you all experts please help?
Regards,
Priti

Hi Andy,
You mean run the program RPTARQEMAIL.
Regards,
Priti

Similar Messages

  • Unwanted leave approval notification mails to Non-Manager

    Hello All,
    I have a situation wherein one of our portal users started getting leave approval notification mails from other employees in that Org Unit. Now the interesting part is he is not a manager and never was. Checked his relationships, substitutes and delegations and every where it is normal and not supposed to receive such mails. Moreover we are not using workflows yet
    Where could we have gone wrong, after so many attempts now my I am gone blank so please do suggest me all tables or customizations where it could went wrong or possibly any silly mistakes that would trigger this kind of problems.

    Thanq, that was very prompt;
    Here are my settings in RPTARQEAIL.
    Send email to requestor with text HR_TIM_ARQ_REQUESTOR with general notification almost for all.
    But should I rather check the settings for mail to approver instead? Coz one of a non manager employee  is getting approver notification mail such as " your employees in your dept are awaiting for your processing..."
    Can you brief me out on why this document selection radio button could have gone wrong in sending mails to requestor regarding approvals.

  • Leave approval notification in microsoft outlook

    Hi All,
    I searched on SDN for the similar activity ,but could not get step by step procedure for this task,
    I have done the SMTP setting  via SCOT and selected internet in supported address types section.
    I tried to run  report RSWUWFML2  but no output.
    any suggestions please

    To Microsoft outlook for Leave request for approval, you need to use DUET product, which integrates this functionality
    Leave Management [original link is broken]
    Or you can mails to be available in UWL using SONIC connectior
    http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/8525afd0-0d01-0010-aaa0-ac6b9e3a2907
    Ensure you are running the Job Rptarqemail for sending out mails

  • LOA Approval notification should show Leave Occurance and YTD totals

    LOA Approval notification should show Leave Occurance and YTD totals for manager and HR Specialist???
    Hi this is very Urgent
    Thanks

    Hi,
    Please post your question in [Human Resource Management (HRMS)|http://forums.oracle.com/forums/forum.jspa?forumID=113] forum, you would probably get a better/faster response.
    Regards,
    Hussein

  • Is there a way to leave the notification center open

    Hello all,
    I wondered if there was a way to leave the notification center open in OS 10.8.1.
    Maybe via the terminal?
    I am using a 30" monitor and to me it would make sense to have NC alway open.
    Thanks a lot.
    Cheers.

    You can poke around yourself,  but right off I do not see how this is possible in customizing the plist.
    Finder>Go>Go to folder>
    /System/Library/CoreServices/Notification Center.app
    You can right click to open> Show Package Content.

  • Deleted PO Approval Notification Accidently, now cant approve Draft. (2007)

    My Customer accidently deleted an approval notification. The PO displayes in the Document Drafts report, but when the user drills down into the draft to add it, they get a message: "An authorization for this document has allready been sent. Document can not be added unless this authorization process is completed."
    I have two users who can approve this documet, with a required segnature of 1 user.
    Any suggestions?
    thanks

    How? That was my question. How do you get an approval message back after your accidently deleted it.
    The answer below helped. I wasnt awar the entering user could go into the Send portion of the Message / Alert overview window, and re-send the message.
    Thank you for your response, and taking the time to help!
    Sincere regards,
    Mike

  • Leave approval text changes are not displayed in UWL

    Hi friends,
    I have made some changes to text label of leave approval application using ctrl+right click(done in role->workset->page->iview) in content admin but it not reflecting in UWL(when calling leave approval application in UWL).any idea pls.

    Hi,
    aah i think the problem is at the uwl xml config file, which controls which iview is opening for a specific task id.
    please enable the support info, at this u can see which xml file is used and you can change the directory/iview which is called by opneing the "leave approval":
    1. Log on to the portal
    2. Navigate to the following path: system administration   > system
    configuration
    3. In detailed navigation click on the UWL & Workflow folder
    to expand out
    4. Then click on the Universal Worklist Administration link
    5. Scroll down to the bottom of the page:
    Optional Universal Worklist Service Configuration
      Open the Tray for the Optional UWL Service Configuration
    Click on the button to open the tray for the optional UWL service
    configuration
    6. Scroll down again
    7. Go into edit mode
    8. Display Support Information:   Set the parameter to true
    9. Save
    have also a look here:
    http://help.sap.com/saphelp_nw70/helpdata/en/44/c0001cdfcd1386e10000000a155369/frameset.htm
    i hope this can help u
    br,
    fabian

  • Error in Leave Approval Workflow

    Hello Experts,
    I'm Using Standard Workflow WS0040077 for Leave Approval . I Activated the Event Linkage in SWEL .Did General Task in Agent Assignment . But when i run transaction PA30 . i get this error in SAP Inbox.
    Following error occurred:
    00 341
    RFC_NO_AUTHORITY
    Message text:
    Runtime error RFC_NO_AUTHORITY has occurred
    SAP System: EDV
    Client: 100
    Event container appended as attachment.
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM).
    so what should i do to solve this problem.

    Hi,
      Have you checked the workflow config in SWU3? It sounds like there may be a problem with the LOCAL RFC destination used by workflow. Click the 'Start Verification Workflow' button in SWU3 as a health check.
    Also, are you testing this in the right client?
    cheers
    Paul Bakker

  • How to modify message or subject in po approval notification

    sir,
    please tell how to modify message or subject in po approval notification process ,
    new database item should get displayed in either message or subject
    regards

    Hi, you'd have to load the .emlx file for it into something like Text Wrangler, modify it & save it, I think the only way in Mail would be to Forward it to yourself with an edited Subject line.

  • Modify PO approval notification

    All,
    I need to add some extra information to the PO approval notification.
    I have downloaded the PO Approval item but I am not sure which
    process/ message I should change.
    Can you please tell me how to find out what needs to be changed or
    where I should make changes in the workflow?
    Thanks.
    Edited by: 973508 on Apr 17, 2013 4:21 PM

    I have identified the message as "PO Approve".
    I have added a new attribute called "Requisition Number" to "PO Approval Process" and used it
    in "Approve PO" message. I have also modified the procedure PO_POAPPROVAL_INIT1.SetPOHdrAttributes
    to retrieve the requisition number of a PO and setting the attribute of "Requisition Number" with it.
    Then, in the Approve PO message body I have added "Requisition Number: &REQUISITION_NUMBER" in workflow
    builder and saved it in to the target database.
    But, the approval workflow notification message is not picking my requisition number.
    I am not sure how to actually modify the message of the notification to use the
    newly added Requisition number attribute in it.
    Can any please give me some direction here?
    Thanks.
    Edited by: 973508 on Apr 21, 2013 2:46 PM

  • Customize PO Approval Notification OA page

    Hi
    I am trying to customize PO Approval Notification. I want to add more attributes to the &PO_LINE_DETAILS. how to do it. presently. I made change in the workflow but it doesnt reflect on the page.
    Purchase Order Lines
    Line Item Number Rev. Item Description UOM Quantity Unit Price Line Amount
    Want to add Cost center, Promised date columns to this table.
    Please let me know how to do it.
    Thanks

    Find the PO OAF embedded region in the notification. Then you need to personalize that region and add your required columns assuming the attached VO has those values. Otherwise you might have to do VO substitution also.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to route PO Approval Notification to Requestor instead of PO Preparer?

    Dear All,
    For PR Approval notification, it is possible to modify the workflow slightly so that the approval notification will be sent to the Requester instead of the Preparer.
    For PO Approval notification (PO Approved), is it possible to route the notification to the Requestor (PR Requestor) instead of the PO Preparer?
    Thanks a lot!
    Ken

    Ken,
    This may not work even if you pass the requester_user_name to this function. Requester name, as I see it, is specifically introduced for the temp labor functionality and not for the normal lines (like goods or expenses). Looks like that is the reason why this is not working when you have changed the workflow, as this attribute is set only if the line is Temp Labor along with others.
    You may have to introduce new activity (at the beginnig) to set the value to your own attribute selecting the requestor name from the distributions for the entire PO and use it in the notification or the function suggested here.
    Thanks
    Nagamohan

  • PO attachments in PO approval notification

    All, is it possible to display the PO attachments/ their information in the PO approval notification itself?
    If so, please tell me where to start.
    Thanks.

    Hi,
    If possible download standard POAPPRV (PO Approval) workflow.
    Copy PO Approval Top Process to create
    <YourCompany>PO Approval Top Process eg. xxPO Approval Top Process .
    Inside the process you can similarly create new custom sub process and packages by copying standard packages and include your custom requirements.
    This way you can keep standard code untouched. However in future you need to keep track of those changes for while Patch and Upgrades.
    Thanks,
    Jit

  • PO approval notification email issue

    Hi,
    When user try to approve PO, it sends email notification to manager who has correct approval athority. Manager can see the approval notification email but notification doesn't have PO Line details section (section which has PO Line information). How to fix it?
    Thanks
    Vijay

    Hi,
    To confirm that the patches are resp, can you check the file modified dates POXVCOMS.pls and POXVCOMB.pls? (To know the path on the box run diagnostic apps check for PO module and look for these file names).
    If they match with the patch application dates, then you might have to open a SR and get the fix from Oracle
    Karthik.

  • PO Approval Notification to multiple users

    Dear All,
    Currently in our setup PO approval notification is working fine.
    I want to send the final approval notification to other audience who are not there in workflow hierarchy.
    can anyone guide on this?
    Regards
    Deepali

    I assume you want to send an FYI notification.
    You can either customize the po workflow to add the fYI notification or you can write an alert that fires when a PO is approved.
    Hope this helps,
    Sandeep Gandhi

Maybe you are looking for