Leave Request -- Create Object Error

Hi,
we are getting a dump in leave request application,
The message gives the following
CREATE OBJECT: The Class was not found, error key RFC_ERROR_SYSTEM_FAILURE.
the same user says the application was working fine before.
thanks in advance
sera

if you leave configuration is done .
there will be some There was an incorrect data in your system . to do this please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver .
after there will be some incorrect workitem in appover inbox.
you need to clear that also by Tcode - SWWL.
Regards,
Vivek Jadhav

Similar Messages

  • In ESS-Leave Request -A critical error has occured.

    In ESS when tried to enter the Leave which is under Leave request the below error occured:
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE  
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.hr.lea.blockcale.FcBlockCale.getBcData(FcBlockCale.java:232)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalFcBlockCale.getBcData(InternalFcBlockCale.java:250)
         at com.sap.xss.hr.lea.blockcale.FcBlockCaleInterface.getBcData(FcBlockCaleInterface.java:135)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalFcBlockCaleInterface.getBcData(InternalFcBlockCaleInterface.java:224)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalFcBlockCaleInterface$External.getBcData(InternalFcBlockCaleInterface.java:276)
         at com.sap.xss.hr.lea.blockcale.VcBlockCale.onInit(VcBlockCale.java:261)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCale.onInit(InternalVcBlockCale.java:275)
         at com.sap.xss.hr.lea.blockcale.VcBlockCaleInterface.onInit(VcBlockCaleInterface.java:163)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCaleInterface.onInit(InternalVcBlockCaleInterface.java:144)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCaleInterface$External.onInit(InternalVcBlockCaleInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1246)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:547)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:591)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:822)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Eecale_Get(LeaveRequestAdaptiveModel.java:434)
         at com.sap.xss.hr.lea.model.Pt_Arq_Eecale_Get_Input.doExecute(Pt_Arq_Eecale_Get_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 60 more

    I found out the solution and solved this issue.
    Deleted the leave request which was created with error i.e: from the custom table zxx_vacr noted down the id initiater ( which had error) and in the Test Environment for Leave request (PTARQ) gave the PERNR and deleted the documents ( gave the id iniater in the document status ).
    To check the error work flow go to SWIA and check for that Workflow (Leave) raised by the PERNR at that duration ( check in IT2001 for the duration) and give it here.
    After deleting it check in the portal for the leave request.

  • Leave Request create RFC or BAPI

    HI,
         RFC or BAPI for leave request create and that will trigger a work flow.
      Input Parameters Pernr, Absence subtype, and date.
    Thanks in advance
    Regards,
    Kiruba.R

    HI Batwara,
        When I execute the RFC am getting the following return messages.
    I   HRTIM00WS            009 Generate period work schedule FLEX for 2/06/01 in 04/2009   
    E    PG                   184 Employee/applicant is not locked yet                        
    any idea pls.
    Regards,
    Kiruba.R

  • MSXML6 not supporting VB6 outlook.Attachments (MailItem.Attachments) getting ActiveX cannot create object error

    Hi, This is about msxml4 removal from my application for security reason.
    Currently in my application Outlook Addin with VB6 using Office2010 and outlook object is refering with MSOUTL.OLB from C:\Program Files\Microsoft Office\Office14
    When unregister MSXML4.dll to remove the dependacy of it and use MSXML6.dll, My application getting error.
    VB6 outlook.Attachments getting ActiveX cannot create object error
    if i register msxml4.dll again, then the same is working fine.
    Pls suggest how to remove msxml4 dependancy without this error
    Regards,
    Sathiya

    Firstly, you shouldn't be messing with the system dlls.
    Secondly, do you create an instance of the outlook.Attachments object (using "new" etc.)? That object cannot be created, you can only retrieve if from an Outlook item (e.g. MailItem.Attachments property).
    Please show the relevant snippet of your code.
    Dmitry Streblechenko (MVP)
    http://www.dimastr.com/redemption
    Redemption - what the Outlook
    Object Model should have been
    Version 5.5 is now available!

  • ESS Leave Request - Portal Runtime Error when the "Cancel" button is hit

    We have configured the Leave Request application, created a custom workflow, created security roles, and we are now testing in our quality environment. 
    We are encountering a very strange "Portal runtime error" which we cannot resolve - When you come into the Leave Request application, and then, without completing the request, just hit the "Cancel" button, the runtime error is generated.
    We have run a trace of authorizations and everything has come up clean.  Everything is configured, and there are no problems actually creating, approving and posting requests. 
    Any ideas?

    Hi,
    please check whether the user is authorized to cancel the request.
    and take a look at this WS12300111
    Regards
    Manohar

  • Oracle eAM Enterprise Asset Management, Work Request Create Page Error

    Dear All
    I am facing this error on Oracle eAM Enterprise Asset Management, Work Request Create Page
    oracle.apps.fnd.framework.OAException: java.lang.ArrayIndexOutOfBoundsException
         at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3247)
         at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(OAPageBean.java:3042)
         at OA.jspService(_OA.java:228)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
         at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:662)
    ## Detail 0 ##
    java.lang.ArrayIndexOutOfBoundsException
    java.lang.ArrayIndexOutOfBoundsException
    ----------------------------------------------------------------------------------------------

    I am finding eAM to be pretty interesting in the asset intensive environment. My implementations in shopping mall, metal and plastic manufacturing are quite interesting. It simply depends upon how you configure the system. It is a good package in my opinion
    Regards
    Lokesh Tayal CPIM

  • ESS Leave Request - creating a Leave Request for another employee

    Hi,
    We're working on ECC6 + EP7 + ESS/MSS Leave Request scenario
    and we've a problem about "substitution". Not the substitution for dealing with somebody else workitems in UWL, but "substitution" for "acting" like somebody else.
    We want to authorize an assistant to enter a leave request in place of an other employee.
    as if this assistant were connected in ESS/LaavRequest with the user of the employee.
    To explain, in 46c/ITS620, our scenario was the following :
    - We modified the SAP standard internet service Leave Request to add a combo box, so when the assistant connected to the ITS page with her user, she had a list of all employees.
    - we modified the SAP standard to change the variables containing the connected user information, so the creation of an absence request was made for the user selected in the list.
    We want to keep this possibility in the new ESS.
    Any idea if something exists in the SAP standard ?
    Thanks

    This scenario is not available in ESS, ie This kind of functionality is not available from ESS
    But you can achieve it using your added link In MSS > General information
    there you have many services for individual employees

  • Enhancement request : Create object based upon existing

    It would be useful to be able to create a new object based upon the definition of an existing one (e.g. a GUI version of CTAS).
    (for those browsing the forums who haven't come accross the acronym before, CTAS = "Create table as select")

    Hmmm .... ok, you got me !
    But, I would say .... can we have a tickbox there for "metadata only" i.e. CTAS table with no data.

  • Overview of Leave --- CREATE OBJECT: The class  was not found., error key:

    Dear Gurus,
    Iam facing this problem that, when i try to open the Leave Overview from the leave request screen. it gives the dump with message
    CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE   
    this also creates a dump in the back end.
    The same dump is appearing when i try to view the Check Documents for the same employee from PTARQ.
    Thanks in advance
    Ramnath

    Hi ,
    please find the following solution .it will definitely work .
    If you leave configuration is done.
    There was an incorrect data in your system. To do these please follow following process.
    delete this request using
    PTARQ> Delete documents (RPTARQDBDEl)
    Please read the report documentation before
    deleting the request but it should be safe as it is
    a development system.
    Please delete this with the above information or delete all
    the records for the approver.
    After this,, there will be some incorrect workitem in approver inbox.
    You need to clear that also by Tcode - SWWL.
    ALSO check the leave request workflow of that employee and if there is any error workflow lying in the workflow delete the leave request (which was created with error) Note down the id initiater ( which had error) and in the Test Environment for Leave request (PTARQ) gave the PERNR and delete the documents ( give the id iniater in the document status ).
    To check the error work flow go to SWIA and check for that Workflow (Leave) raised by the PERNR at that duration ( check in IT2001 for the duration) and give it here.
    After deleting it check in the portal for the leave request if any error is occuring when trying to apply for leave.

  • Runtime Error '429': ActiveX component can't create object

    Hi,
    I am using below code in vb6 application but this is throwing an "Runtime Error '429': ActiveX component can't create object" error.
    CreateObject("OracleInProcServer.XoraSession")
    is that due to any dll or reference error ?
    I have an Oracle client installed on my PC
    please share your solution
    Thanks in advance

    Are either of those 64 bit? If so, your problem is likely related to that.
    A 64 bit Oracle client doesn't support OO4O at all, so this code will never work with that client. You need to use a 32 bit one.
    If you are using a 32 bit client but on a 64 bit OS, I've found the 11.2.03 installer doesn't properly register the files. Manually registering OraOleDB11.dll may fix it, though we had to do some other registry stuff and it got very ugly. Backing up to a slightly older client should also fix the problem.

  • Create Leave request

    Hi ,
    We have configured ESS/MSS with portal. We have created a Iview Leave request(IAC).
    When we executing this it is displaying R/3 inbox means SWBP insted of showing leave request create view..

    Hi Chuckie,
    Thanks for your response.
    I am trying to create a leve request from my inbox by pressing Create leave request. Earlier it opens a create window. Now a days we are getting SAP R/3 SWBP transation.
    We are using EP-6.

  • In ESS- Leave request -RFC_ERROR_SYSTEM_FAILURE occurs

    In ESS - Under Working TIme ->Leave request : the following error occurs.
    When the employee tries to apply leave in the leave request it throws the following error message:
    Create Object:The class was not found,.error key:RFC_ERROR_SYSTEM_FAILURE

    In this scenario - check the work flow and if any previous error work item exist in the work flow delete it and check again to apply leave in Leave request. It will not throw any error.

  • Error in BASIS when trying to create a Leave Request

    Hi,
    We have developed an application in Oracle Forms 10g which is used by employees to create leave requests and transfer them to the SAP portal through BDC. There's a ABAP program to collect all leave requests applied by many employees in the Oracle system and then transfer them to the SAP Portal. The BDC captures the screen *Test Report for the UIA Interface for Leave Requests in the tcode PTARQ.*
    The leaves then appear in the respective approvers portal login and the leaves are accordingly approved or rejected with the status updated back to the Oracle database by another ABAP program. These programs are set as background jobs on the Production server 900 to run on a daily basis in the "BASIS" login.
    Lately we found that the program was not updating the leave requests from Oracle to SAP. When I debugged the program in ERROR mode, I found an error is thrown while processing the BDC, after the foll. code in the SAP std. program
    Program name: RPTARQUIATEST
    Program Event : In FORM REQUEST_CHECK
    At FORM PROGRESS_INDICATOR
    The error message says : No document created: HRTIM_ABS_REQ 075 No personnel number defined for system user name B Message no. HRTIM_ABS_REQ061.
    Please advice as to what is creating the problem when using the BASIS login and what does the error mean. If you need some more clarification on this please let me know.
    Thanks & Regards,
    Vidya Shirodkar.

    Hi Vidya,
    Is this for all the employees or just few of them? This error is usually related to the communication infotype, check 0105 infotype and see if the user ID is correctly maintained.
    Thanks,
    Muktar

  • ESS Leave Request - Error while creating a leave record

    Hi Friends,
      Some of the ESS leave request(not workflow) has gone into error when the system tryies to create a leave record in background. I can view these error request using the report RPTARQDBVIEW. This happens when the background program(PTARQPOST) tries to create a leave record. In some cases  the status of the leave request is set to error(the status attribute of the container element(Req) has the value Error),but we are not able to find what is actual error.Is there any log where we can check what is the problem? Please advice.

    May be
    Internally the pernr might not be locked or some one may be maintaing the pernr for whom you are trying to post.

  • Error in creating leave request

    Hi ,
    I am new to HR and i am working on Leave management.
    When i am trying to crate a leave request workflow, i am getting the below error msg:
    'Absence type 100 was not found in Customizing for 21.10.2010'
    What could be the reason?\
    Thanks,
    Krish.

    Hello Kishore,
    You don't have the absence type created on either one of the two following tables.
    T554S - This one is for the Absence creation on the backend in IT2001.
    T554S_Web - This one is to show on the frontend framework of the Leave Request.
    Regards,
    Bentow.

Maybe you are looking for