Leaving dynpro with obligatory fields.

Hi everyone.
What I'm trying to find is some way to leave (using a cancel button) a dynpro that has obligatory fields without having to complete them.
What I've done is including the following code in the PBO user-command module:
  case sy-ucomm.
    when '&CANC'.
      leave to screen 0.
    when '&OK'.
    endcase.
What happens is that every time that I hit cancel, an error message that says that I must complete every obligatory field pops up and I have to do that in order to leave the dynpro. ¿Any idea about how to fix this?
Thanks a lot,
Fernando.

Hi,
IN the GUI STATUS for the function code &CANC .have the function type as 'E' (Exit command).
Then in the PAI..have a new module ..
MODULE EXIT_COMMAND AT EXIT-COMMAND.
In that module have your code for CANC function code..
Thanks,
Naren

Similar Messages

  • Using SELECT_OPTIONS in Web Dynpro with currency fields

    I have an application where I use SELECT_OPTIONS to gather search parameter values for a query which has amount and currency fields.  In my WDDOINIT, I am calling add_selection_field to add the fields that I wish to use to search.  One of the fields is a currency key and another is the amount.  The query returns the found data in an ALV and each record has its amount formatted correctly based on the currency key field in each record.  This all works as it should.
    However, the search parameter for the amount field is always formatted based on its data type and not on the other search parameter with the currency key.  The currency key field does not allow multiples so it is either present or not (using the default would be fine if the currency key is not specified).  If it is specified, I would like it to format the amount.low and amount.high input fields correctly.
    For example, if I enter 'USD' in the currency key search field and '10' and '20' in the amount from/to fields, respectively, when I press the search button or hit enter, both the amount to/from fields' display changes to '10,00000' and '20,00000', respectively which is the data type definition of CURR19,5.
    I found no documentation on how to handle formatting of currency or quantities in the search fields when using SELECT_OPTIONS.  Has anyone solved this problem?  I looked at all the parameters to the add_selection_field method and cold not find a way to associate the currency key to the amount.  Any help would be greatly appreciated.

    Hi Mark,
    I don't think, it is possible to get the currency key reference for the amount fields in selection screen by using IF_WD_SELECT_OPTIONS.
    I would suggest you the below work around option
         If you do not have the requirement of passing multiple values in either currency key field or amount field, you can go for normal input fields to design your input screen.
    Create a structure with 3 fields , CURR, AMT_LOW, AMT_HIGH
    Use currency reference field in structure with self structure name and CURR field, so that amount fields refer to the same structure's currency key
    Create a node by using this structure and design the input fields from this context node
    Now, the amount fields have the reference of currency key from the structure and it should work fine
    Hope this helps you.
    Regards,
    Rama

  • Radio buttons in dynpro with mandatory field

    I have two radio buttons in a group and a field that should be mandatory when one (the first one) is checked.
    So when the other is checked it should not be mandatory.
    The problem is that when I check the second the field is mandatory until I have put something in the field. In that moment, the field is not mandatory. What I want is to make the field not mandatory when the second is checked so the status of the field was changed to not required in that moment not when I put something in it.
    Thank you

    Hi Maria,
    I think you have two possibility.
    One is to check the "mandatory field" by programming and not with the attribute in the dynpro.
    The second way is making a loop at screen in the PBO and depend on with radio button is checked modify the required field of screen table for the field of your interest .
    I hope this can help you.
    bye
    enzo

  • What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

    What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

    You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
    Tools > Protection > Encrypt < Encrypt with Password
    Answer YES to change the security.
    A new window opens:
         Do NOT select Document Open (or that will require a password to open the document.)
         Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
         Change the following 2 settings from the drop-down box:
              Printing Allowed: Select High Resolution
              Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
              Leave selected: "Enable text access for screen reader devices for the visually impaired"
              Change Permissions Password (insert a strong password)
              Leave all other settings alone in "Options"
              OK - OK
              Re-enter the Permissions Password (the one you entered above)
              OK - OK
              Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

  • Is it possible to set up a Paragraph Style leaving the Font Style field blank?

    We often have to import text into InDesign from Word docs. We place the docs (Command-D, rather than copying and pasting) in order to preserve italics, bold text, etc. As it is now, we have to select all the text and set each element separately - leaving the Font Style field blank - in the Character Palette.
    It would save a lot of time, if we could set up a Paragraph Style without specifying the Font Style, (leaving it blank), which overrides the formatting we are trying to preserve. Is this possible?

    The answer is "kind of". You can create the Paragraph Style you want to apply and select the paragraphs you want to apply it to - then right-click on the Paragraph Style and choose 'Apply "Body". Clear Character Styles.'
    It is possible to do this as a Character Style if you click outside of a text area and create a new style. I do it all of the time as I import lots of Word documents to write to ePub (you have to define all of the styles to ensure the document looks right). Since the documents come in with small caps, bold, italics, different font sizes but the same font throughout.
    So I have a style based on None with blank Font Size and Font Style which I apply to the whole document. If there is anything in these boxes you can just erase it by backspacing over the text.

  • Safari crashes in pages with text field

    I had the bugger of a problem with the "Your network settings have been changed by another program" bug (virus?). I solved that by doing the quick-finger return/click settings, duplicate my settings, delete Automatic, and rename my duplicate one "Automatic".
    At the same time that this problem occured, I noticed Safari crashing on any page with text fields, which is just about ANY page these days. I've also noticed Skype crashes, and while searching with Spotlight, that periodically crashes also. Firefox works fine, iChat works fine.
    These programs are only affected in my main account - I created a new user account and don't have the problems there. But I also don't have access to any of my important files and settings in the new account!
    My question is - how can I get functionality in my main account, where all my IMPORTANT files reside?
    I have done everything - repairing disk and permissions until my ears bleed, re-re-re-install and archive, virus scans (yes there are), pulling out .plists and library files, reset safari, probably did more damage than good, etc., etc., etc.
    I can't figure out what I need to do and it's seriously driving me BUGGY
    Any HELP would be greatly appreciated, (as I see a lot of mac problems in these forums but very few solutions).
    Crash Log:
    Date/Time: 2008-09-22 01:26:37.112 -0400
    OS Version: 10.4.11 (Build 8S2167)
    Report Version: 4
    Command: Safari
    Path: /Applications/Safari.app/Contents/MacOS/Safari
    Parent: WindowServer [64]
    Version: 3.1.2 (4525.22)
    Build Version: 6
    Project Name: WebBrowser
    Source Version: 45252200
    PID: 289
    Thread: 4
    Exception: EXC_BREAKPOINT (0x0006)
    Code[0]: 0x00000002
    Code[1]: 0x00000000
    Thread 0:
    0 libSystem.B.dylib 0x90042cfc fsync + 12
    1 com.apple.Foundation 0x9283dbf0 -[NSData writeToFile:atomically:] + 112
    2 com.apple.WebKit 0x94d78f98 -[WebHistoryPrivate _saveHistoryGuts:URL:error:] + 232
    3 com.apple.WebKit 0x94d78e94 -[WebHistoryPrivate saveToURL:error:] + 62
    4 com.apple.WebKit 0x94d78e03 -[WebHistory saveToURL:error:] + 51
    5 com.apple.Safari 0x00030217 0x1000 + 193047
    6 com.apple.Foundation 0x9281006f __NSFireDelayedPerform + 403
    7 com.apple.CoreFoundation 0x9082c756 CFRunLoopRunSpecific + 3341
    8 com.apple.CoreFoundation 0x9082ba42 CFRunLoopRunInMode + 61
    9 com.apple.HIToolbox 0x92df2878 RunCurrentEventLoopInMode + 285
    10 com.apple.HIToolbox 0x92df1f82 ReceiveNextEventCommon + 385
    11 com.apple.HIToolbox 0x92df1dd9 BlockUntilNextEventMatchingListInMode + 81
    12 com.apple.AppKit 0x93277f45 _DPSNextEvent + 572
    13 com.apple.AppKit 0x93277b37 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 137
    14 com.apple.Safari 0x00007de3 0x1000 + 28131
    15 com.apple.AppKit 0x932718c4 -[NSApplication run] + 512
    16 com.apple.AppKit 0x93265820 NSApplicationMain + 573
    17 com.apple.Safari 0x000aa2c2 0x1000 + 692930
    18 com.apple.Safari 0x000aa1e9 0x1000 + 692713
    Thread 1:
    0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
    1 com.apple.WebCore 0x94fc2adc WebCore::ThreadCondition::wait(WebCore::Mutex&) + 24
    2 com.apple.WebCore 0x94fbda79 WebCore::IconDatabase::syncThreadMainLoop() + 243
    3 com.apple.WebCore 0x94f782fa WebCore::IconDatabase::iconDatabaseSyncThread() + 180
    4 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 2:
    0 libSystem.B.dylib 0x90042cfc fsync + 12
    1 com.apple.Foundation 0x9283dbf0 -[NSData writeToFile:atomically:] + 112
    2 com.apple.Foundation 0x92866d5b -[NSFileManager createFileAtPath:contents:attributes:] + 80
    3 com.apple.Foundation 0x92866cab -[NSFileManager(NSURLExtras) webcreateFileAtPathWithIntermediateDirectories:contents:attributes:directoryAttribu tes:] + 56
    4 com.apple.Foundation 0x92865aea -[NSURLCache _diskCacheExecuteWrite:] + 422
    5 com.apple.Foundation 0x9285e506 -[NSURLCache _diskCacheSync] + 264
    6 com.apple.CoreFoundation 0x9082c756 CFRunLoopRunSpecific + 3341
    7 com.apple.CoreFoundation 0x9082ba42 CFRunLoopRunInMode + 61
    8 com.apple.Foundation 0x92856c76 +[NSURLCache _diskCacheSyncLoop:] + 206
    9 com.apple.Foundation 0x927fa39c forkThreadForFunction + 123
    10 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 3:
    0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
    1 com.apple.Foundation 0x928502fc -[NSConditionLock lockWhenCondition:] + 39
    2 com.apple.Syndication 0x9a461966 -[AsyncDB _run:] + 181
    3 com.apple.Foundation 0x927fa39c forkThreadForFunction + 123
    4 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 4 Crashed:
    0 com.apple.Foundation 0x9282d4b3 _NSRaiseError + 227
    1 com.apple.Foundation 0x928542f3 +[NSException raise:format:] + 57
    2 com.apple.Foundation 0x928e3a76 _NSFileHandleRaiseOperationException + 142
    3 com.apple.Foundation 0x9286a880 -[NSConcreteFileHandle readDataOfLength:] + 492
    4 com.apple.Foundation 0x9286b787 -[NSConcreteFileHandle readDataToEndOfFile] + 41
    5 com.apple.Foundation 0x9286aef3 -[NSHTTPCookieDiskStorage(NSInternal) _saveCookies] + 336
    6 com.apple.Foundation 0x9286acb2 saveTimerCallback + 132
    7 com.apple.CoreFoundation 0x9082c756 CFRunLoopRunSpecific + 3341
    8 com.apple.CoreFoundation 0x9082ba42 CFRunLoopRunInMode + 61
    9 com.apple.Foundation 0x9282fa40 +[NSURLConnection(NSURLConnectionInternal) _resourceLoadLoop:] + 259
    10 com.apple.Foundation 0x927fa39c forkThreadForFunction + 123
    11 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 5:
    0 libSystem.B.dylib 0x9001a1cc select + 12
    1 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 6:
    0 libSystem.B.dylib 0x90016a7c unlink + 12
    1 com.apple.Foundation 0x9283ebfc -[NSFileManager _removeFileAtPath:handler:shouldDeleteFork:] + 2411
    2 com.apple.Foundation 0x9283e821 -[NSFileManager _removeFileAtPath:handler:shouldDeleteFork:] + 1424
    3 com.apple.Foundation 0x9283e285 -[NSFileManager removeFileAtPath:handler:] + 240
    4 com.apple.Safari 0x0004ebe5 0x1000 + 318437
    5 com.apple.Safari 0x00027cac 0x1000 + 158892
    6 com.apple.Foundation 0x927fa39c forkThreadForFunction + 123
    7 libSystem.B.dylib 0x90024227 pthreadbody + 84
    Thread 4 crashed with X86 Thread State (32-bit):
    eax: 0x15f22000 ebx: 0x9282d3de ecx: 0x90a5a321 edx: 0x15e4aa00
    edi: 0x15ebd1c0 esi: 0x15ebd260 ebp: 0xb019f5e8 esp: 0xb019f580
    ss: 0x0000001f efl: 0x00000246 eip: 0x9282d4b3 cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
    Binary Images Description:
    0x1000 - 0x121fff com.apple.Safari 3.1.2 (4525.22) /Applications/Safari.app/Contents/MacOS/Safari
    0x8fe00000 - 0x8fe4afff dyld 46.16 /usr/lib/dyld
    0x90000000 - 0x90171fff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x901c1000 - 0x901c3fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x901c5000 - 0x90202fff com.apple.CoreText 1.1.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
    0x90229000 - 0x902fefff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x9031e000 - 0x90773fff com.apple.CoreGraphics 1.258.79 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x9080a000 - 0x908d2fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x90910000 - 0x90910fff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x90912000 - 0x90a06fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x90a56000 - 0x90ad5fff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x90afe000 - 0x90b62fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib
    0x90bd1000 - 0x90bd8fff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib
    0x90bdd000 - 0x90c50fff com.apple.framework.IOKit 1.4.8 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90c65000 - 0x90c77fff libauto.dylib /usr/lib/libauto.dylib
    0x90c7d000 - 0x90f23fff com.apple.CoreServices.CarbonCore 682.30 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x90f66000 - 0x90fcefff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x91007000 - 0x91046fff com.apple.CFNetwork 129.22 (129.23) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x91059000 - 0x91069fff com.apple.WebServices 1.1.3 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
    0x91074000 - 0x910f3fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x9112d000 - 0x9114bfff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
    0x91157000 - 0x91165fff libz.1.dylib /usr/lib/libz.1.dylib
    0x91168000 - 0x91307fff com.apple.security 4.5.2 (29774) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x91405000 - 0x9140dfff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x91414000 - 0x9141bfff libbsm.dylib /usr/lib/libbsm.dylib
    0x9141f000 - 0x91445fff com.apple.SystemConfiguration 1.8.6 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x91457000 - 0x914cdfff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x9151e000 - 0x9151efff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x91520000 - 0x9154cfff com.apple.AE 314 (313) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
    0x9155f000 - 0x91633fff com.apple.ColorSync 4.4.10 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x9166e000 - 0x916e1fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x9170f000 - 0x917b8fff com.apple.QD 3.10.27 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x917de000 - 0x91829fff com.apple.HIServices 1.5.2 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x91848000 - 0x9185efff com.apple.LangAnalysis 1.6.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x9186a000 - 0x91885fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
    0x91890000 - 0x918cdfff com.apple.LaunchServices 183 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
    0x918e1000 - 0x918edfff com.apple.speech.synthesis.framework 3.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x918f4000 - 0x91934fff com.apple.ImageIO.framework 1.5.8 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
    0x91947000 - 0x919f9fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
    0x91a3f000 - 0x91a55fff libcups.2.dylib /usr/lib/libcups.2.dylib
    0x91a5a000 - 0x91a78fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
    0x91a7d000 - 0x91adcfff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJP2.dylib
    0x91aee000 - 0x91af2fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
    0x91af4000 - 0x91b7cfff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRaw.dylib
    0x91b80000 - 0x91b9bfff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
    0x91ba0000 - 0x91ba2fff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
    0x91ba4000 - 0x91c82fff libxml2.2.dylib /usr/lib/libxml2.2.dylib
    0x91c9f000 - 0x91cdefff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
    0x91ce4000 - 0x91ce4fff com.apple.Accelerate 1.3.1 (Accelerate 1.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    0x91ce6000 - 0x91d74fff com.apple.vImage 2.5 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
    0x91d7b000 - 0x91d7bfff com.apple.Accelerate.vecLib 3.3.1 (vecLib 3.3.1) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
    0x91d7d000 - 0x91dd6fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x91ddf000 - 0x91e03fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x91e0b000 - 0x92214fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x9224e000 - 0x92602fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x9262f000 - 0x9271cfff libiconv.2.dylib /usr/lib/libiconv.2.dylib
    0x9271e000 - 0x9279cfff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x927dd000 - 0x92a0dfff com.apple.Foundation 6.4.10 (567.37) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x92b27000 - 0x92b3efff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
    0x92b49000 - 0x92ba1fff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
    0x92bb5000 - 0x92bb5fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x92bb7000 - 0x92bc7fff com.apple.ImageCapture 3.0.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x92bd6000 - 0x92bdefff com.apple.speech.recognition.framework 3.6 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x92be4000 - 0x92beafff com.apple.securityhi 2.0.1 (24742) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x92bf0000 - 0x92c81fff com.apple.ink.framework 101.2.1 (71) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x92c95000 - 0x92c99fff com.apple.help 1.0.3 (32.1) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x92c9c000 - 0x92cbafff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x92ccc000 - 0x92cd2fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x92cd8000 - 0x92d3bfff com.apple.htmlrendering 66.1 (1.1.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x92d62000 - 0x92da3fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x92dca000 - 0x92dd8fff com.apple.audio.SoundManager 3.9.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x92ddf000 - 0x92de4fff com.apple.CommonPanels 1.2.3 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x92de9000 - 0x930defff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x931e4000 - 0x931effff com.apple.opengl 1.4.16 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x931f4000 - 0x9320ffff com.apple.DirectoryService.Framework 3.3 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    0x9325f000 - 0x9325ffff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x93261000 - 0x93917fff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x93c98000 - 0x93d13fff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
    0x93d4c000 - 0x93e05fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x93e48000 - 0x93e48fff com.apple.audio.units.AudioUnit 1.4.2 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x93e4a000 - 0x9400bfff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x94051000 - 0x94092fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib
    0x9409a000 - 0x940d4fff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
    0x940d9000 - 0x940effff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
    0x94188000 - 0x941c6fff com.apple.vmutils 4.0.2 (93.1) /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
    0x9420a000 - 0x9421bfff com.apple.securityfoundation 2.2.1 (28150) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x94229000 - 0x94267fff com.apple.securityinterface 2.2.1 (27695) /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    0x94283000 - 0x94292fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
    0x94299000 - 0x942a4fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x942f0000 - 0x9430afff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x947b2000 - 0x948f8fff com.apple.AddressBook.framework 4.0.6 (490) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
    0x94984000 - 0x94993fff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWra ppers
    0x9499a000 - 0x949c3fff com.apple.LDAPFramework 1.4.2 (69.1.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
    0x949c9000 - 0x949d8fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib
    0x949dc000 - 0x94a01fff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
    0x94a0d000 - 0x94a2afff libresolv.9.dylib /usr/lib/libresolv.9.dylib
    0x94d56000 - 0x94e08fff com.apple.WebKit 4525.18 /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    0x94e73000 - 0x94f3afff com.apple.JavaScriptCore 4525.18 /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
    0x94f76000 - 0x95568fff com.apple.WebCore 4525.18.1 /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    0x9a45f000 - 0x9a496fff com.apple.Syndication 1.0.7 (55) /System/Library/PrivateFrameworks/Syndication.framework/Versions/A/Syndication
    0x9a4b2000 - 0x9a4c4fff com.apple.SyndicationUI 1.0.7 (55) /System/Library/PrivateFrameworks/SyndicationUI.framework/Versions/A/Syndicatio nUI
    Model: iMac5,1, BootROM IM51.0090.B09, 2 processors, Intel Core 2 Duo, 2.16 GHz, 2 GB
    Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.46.9)
    Bluetooth: Version 1.9.5f4, 2 service, 0 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Serial ATA Device: ST3500641AS Q, 465.76 GB
    Parallel ATA Device: PIONEER DVD-RW DVR-K06
    USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
    USB Device: WinTV HVR-980, Up to 480 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: USB-PS/2 Optical Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
    FireWire Device: EZQuest IDE Device, EZQuest Inc., Up to 400 Mb/sec
    FireWire Device: My Book, WD, Up to 400 Mb/sec
    FireWire Device: OneTouch, Maxtor, Up to 400 Mb/sec
    FireWire Device: > LaCie 1394 DVD-R/RW+CD drive LUN 0, LaCie Group SA, Up to 400 Mb/sec

    Well, thanks for ignoring my plea for help all! I'll mark this as "ANSWERED" even though no answers or suggestions have been offered in over 3 days. I'll figure it out by myself.
    The snarkiness in my initial post was because, as I peruse these forums for answers, I see a lot of threads that have no conclusion - either the person asking the question found an answer and never reported back to tell us what actually worked, or their Mac died completely, leaving them unable to post about it.
    I also see a lot of uninformed posts saying things like "There are absolutely NO viruses for the Mac" or "the Mac OS is impenetrable to attacks". Try to be informed before you attempt to be helpful.
    I was also quite upset that it took me 3 days trying to figure out what info was needed to access the forums here. I don't use my "Apple ID" on a daily basis, in fact, I can't recall ever using it for anything, so it was a real effort to get in here and actually ASK my question.
    I've gone from being one of Apple's biggest evangelist for over 28 years, to being a real Mac-Hater - in the span of one machine. This iMac is the worst design I've ever encountered, not only due to the fact that it's a HUGE FIRE-HAZARD but I feel like I'm staring at a cubicle partition whenever I'm using it. I could never imagine Apple sticking everybody with such a badly conceived machine. Especially after all these years of faith and hope that I've placed in the company.
    These new iMacs overheat and die with normal use. This is a KNOWN PROBLEM that Apple is sweeping under the rug. My machine's graphics processor fried, taking the screen and logic board with it. ALL HAD TO BE REPLACED. This is probably unrelated to my recent Safari crashes, but people should know that the life of their Macs are severely reduced (by DESIGN) these days.
    So, thanks for no help everybody. I'll remember not to bother next time.

  • FM  BAPI_SALESORDER_GETLIST obligatory field

    hi gurus,
    regarding about FM BAPI_SALESORDER_GETLIST, im developing a report base on MAT NUMBER for da sales. As client request the report should pull the data from sales quantity by MAT NUM , sales Org and Date in da selection screen. but the problem with  FM BAPI_SALESORDER_GETLIST is, customer Number is a obligatory field. End user just want to see the sales quantityfor each matrial.
    so, how can i skip or avoid using Customer Number field for  'BAPI_SALESORDER_GETLIS'   OR is there any FM where i can get sales quantity  data by using MAT NUM, SALES ORG and DATE..
    oh yeah... i did a coding for this in normal way, but its taking very - very  long time to display from table vbap. if user select mat Num.. it will display very fast. but, if the user execute using only  sales org it will take very very very long time.
    thanks in advance.
    Edited by: MAYAT on Dec 14, 2009 10:53 AM

    hi... the probelm is, its taking very long time to fetch date from da table.... the probelm is end user... end user will only select sales org and execute.
    this concept will take very long to just to display the output. in vbap table, there are more thna 5 million of data. thats why im looking for FM, to make the report more efficient.
    thanks...
    regs mayandi

  • Problem in Webdynpro and Adobe form with signature field

    Hi experts!
    I have a problem with Signature Field in Adobe Form showed in a Web Dynpro Abap.
    During the execution I fill the Signature field correctly but when I push any other button of the Webdynpro, the Adobe Form shows me the next error.
    After click OK, the webdynpro is hang and not respond.
    Any idea why not respond?
    Thanks.

    Hi friend,
    Its not like that the Adobe created using SFP is non interactive.
    We can create interactive forms using SFP transaction using java code.
    I think it will be the problem with ADS just check with your basis people i think they will configure you the settings which works fine.
    To check whether the settings are perfect you can try executing the standard programs FP_TEST_00 and
    FP_PDF_TEST_00. If it works fine then some other problem exists else check with your basis team.
    Just check this and revert me if you have any issues. I will help you
    Thanks,
    Sri Hari

  • How to edit the cube with new fields without changing historical  in BI 7.0

    HI,
    I have requirment that need to edit cube with new fields and without changing historical data on it.
    Please some one can advise me abt the above scenario.
    Note:I am using BI7.0

    hi Krish,
    In BI 7.0,
    we cannot add a characteristic to an existing dimension if the data is not deleted from the cube.
    It can go to a new dimension and that will not change the existing structure of the cube tables, but will just add to it (as another dim table).  or use remodeling.
    for more details, please seach threads.....
    with hopes
    ARS

  • Create survey/poll with text fields

    I want to create a survey in a meeting with text field type answers.  How would I do this?  I am using the hosted version of Connect and saw some reference to a Presenter add-in for PowerPoint, but don't seem have that.  We would like to have fields such as:
    Participant information (name, contact information
    Suggested future topics
    What should I use to do this since the Poll Pod obnly allows for multiple choice or multiple answer options and not key-in fields?
    Karl

    Adobe Presenter 7 is a product sold separately from Adobe Connect. Adobe Presenter can be purchased from many resellers.  It is a plug-in for MS Powerpoint and has the ability to upload many times of quizzes and polls in lots of types of formats.  You can download a 30 day trial from here:
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=presenter&loc=en_us
    Adobe Presenter is only available for the Windows platform. MS Powerpoint for Mac does not allow third-party plug-ins like Presenter.

  • Buyer Beware - Verizon is a company that is only out to get your cash and leave you with trash.

    Verizon is a company that is only out to get your cash and leave you with trash. Verizon has mastered deception. Do not get strung along like I did by calling in and letting them try to fix anything-they are there to make sure you get past your 14 day return period so you are locked into a new 2 year contract and can’t take back any of the accessories you bought for your product. If your product does not work out of the box, RETURN IT IMMEDIATELY, do not call in for tech support and take back any accessories you bought for the product as it also has the 14 day policy too. First off let me say that as far as the PHONE SERVICE, it has been great…however…here is what I have experienced with the 3G Droid Bionic and Verizon. I decided to get the Droid Bionic 4G since they are supposed to have 4G service in my area. It’s either their service or the product that is not 100% 4G like my 3G HTC Imagio is 100% 3G, the so called "4G" Bionic flips in and out. I can’t count how many hours I’ve been on the phone with techs at Verizon and Moto but each time, they all had something different to say, but nothing ever worked and if it did, it didn’t work for long before it went back to the same flip flop. There were several other issues as well but too many to list, but one is that when I was tethered and would get a notification it disconnected from the internet...NOT SUPPOSE TO HAPPEN. I had a specific need for the 4G and since it doesn’t work, I don’t NEED it. The biggest lie I bought into is that MOTO is/was supposed to release a software update that is supposed to fix the flip flop 3G to 4G. I talked to a tech tonight at Verizon that was honest enough to tell me that if there was one that was going to be released (within my 14 day period) that they would have been notified of that. Well guess what, he doesn’t have any notices. But every person I talked to at Verizon said there was going to be an update, is it another one of those…no one knows their butt from a hole in the grown or was he telling the truth. Well it makes sense now that when I was talking with the second level tech at MOTO he didn’t know what the heck I was talking about. There’s your proof that the people you call and talk to at Verizon are devious, deceptive jerks and are only out to make money off us and could really care less that you just spent a bundle of money on a piece of cow dung and that their only goal is to keep you tied into the 2 year contract. After talking with the last tech at Verizon that told me there was no notification of a software update coming from MOTO or at least not in the next two weeks, I decided to take back all my accessories to the Verizon store in my area and return the Bionic tomorrow. But guess what, unlike the rest of America where the return policies are 30 days, Verizon also changed the return policies on the accessories too. So I’m stuck with over $100 of “STUFF” that cannot be used on any other phone. My bad, I didn’t have my reading glasses, look 12 inches down the long small print page to see that it said 14 days, when I bought the “STUFF” and I didn’t know that Verizon’s changes applied to the accessories in there stores too. Why is this and issue because Verizon did have me buy another Bionic phone under a new 14 day policy but because I didn’t realize that same policy applied to the hardware at their local stores, I’m stuck with the “STUFF”. Guess what Verizon; you devious, deceptive jerks, what goes around comes around. You are going to get to know me real well in the coming days, weeks, months and years; I’m going to picket until the freakin cows come home and hopefully get on the local news channels too. I’m going to hopefully create a nationwide movement that will either ruin your company or force you to restore the 30 day policy and I don’t care if you try to sue me that will be even better as it will draw even more attention. Money is hard to come by these days and I’ll not let you screw me over like this and get away with it. Because you are treating your customers like cow dung, I WILL NEVER extend my contract again; when this contact ends I’m switching to another cell provider. I’ve been with you since 2004 but tomorrow I’m switching my family’s phones over as soon as possible since they are not under any contract; this I hope will catch on and others will do the same. We can support the other companies and help them grow so that they can also provide better cell service and then we the people will have a choice, NOT TO GET SCREWED. Verizon, you are going to be the reason that a lot of time is going to be wasted in your stores because of processing numerous returns and a lot of Fed Ex charges on you for people retuning your trash items…unless you want to get it right the first time and or BECOME AMERICAN again and restore the 30 day policy. Verizon’s 4G network and or MOTO products still have so many bugs in them that you might as well keep your 3G and wait for another year or so until they fix everything and stop their devious, deceptive tricks, restore the 30 day policy and start selling products that work out of the box. Verizon, you wouldn’t be the first large company that is going to fall if you keep doing this kind of business. See yea on the news. One comment for Moto: Do you really want to associate yourself with a company that treats their customers like this? I guess Birds of a feather flock together…and get shot together. Yours Truly, One very, very, VERY angry customer

    Randy2009 wrote:
    Verizon is a company that is only out to get your cash and leave you with trash. Verizon has mastered deception. Do not get strung along like I did by calling in and letting them try to fix anything-they are there to make sure you get past your 14 day return period so you are locked into a new 2 year contract and can’t take back any of the accessories you bought for your product. If your product does not work out of the box, RETURN IT IMMEDIATELY, do not call in for tech support and take back any accessories you bought for the product as it also has the 14 day policy too.
    First off let me say that as far as the PHONE SERVICE, it has been great…however…here is what I have experienced with the 3G Droid Bionic and Verizon. I decided to get the Droid Bionic 4G since they are supposed to have 4G service in my area. It’s either their service or the product that is not 100% 4G like my 3G HTC Imagio is 100% 3G, the so called "4G" Bionic flips in and out. I can’t count how many hours I’ve been on the phone with techs at Verizon and Moto but each time, they all had something different to say, but nothing ever worked and if it did, it didn’t work for long before it went back to the same flip flop. There were several other issues as well but too many to list, but one is that when I was tethered and would get a notification it disconnected from the internet...NOT SUPPOSE TO HAPPEN. I had a specific need for the 4G and since it doesn’t work, I don’t NEED it.
    The biggest lie I bought into is that MOTO is/was supposed to release a software update that is supposed to fix the flip flop 3G to 4G. I talked to a tech tonight at Verizon that was honest enough to tell me that if there was one that was going to be released (within my 14 day period) that they would have been notified of that. Well guess what, he doesn’t have any notices. But every person I talked to at Verizon said there was going to be an update, is it another one of those…no one knows their butt from a hole in the grown or was he telling the truth. Well it makes sense now that when I was talking with the second level tech at MOTO he didn’t know what the heck I was talking about. There’s your proof that the people you call and talk to at Verizon are devious, deceptive jerks and are only out to make money off us and could really care less that you just spent a bundle of money on a piece of cow dung and that their only goal is to keep you tied into the 2 year contract.
    After talking with the last tech at Verizon that told me there was no notification of a software update coming from MOTO or at least not in the next two weeks, I decided to take back all my accessories to the Verizon store in my area and return the Bionic tomorrow. But guess what, unlike the rest of America where the return policies are 30 days, Verizon also changed the return policies on the accessories too. So I’m stuck with over $100 of “STUFF” that cannot be used on any other phone. My bad, I didn’t have my reading glasses, look 12 inches down the long small print page to see that it said 14 days, when I bought the “STUFF” and I didn’t know that Verizon’s changes applied to the accessories in there stores too. Why is this and issue because Verizon did have me buy another Bionic phone under a new 14 day policy but because I didn’t realize that same policy applied to the hardware at their local stores, I’m stuck with the “STUFF”.
    Guess what Verizon; you devious, deceptive jerks, what goes around comes around. You are going to get to know me real well in the coming days, weeks, months and years; I’m going to picket until the freakin cows come home and hopefully get on the local news channels too. I’m going to hopefully create a nationwide movement that will either ruin your company or force you to restore the 30 day policy and I don’t care if you try to sue me that will be even better as it will draw even more attention. Money is hard to come by these days and I’ll not let you screw me over like this and get away with it.
    Because you are treating your customers like cow dung, I WILL NEVER extend my contract again; when this contact ends I’m switching to another cell provider. I’ve been with you since 2004 but tomorrow I’m switching my family’s phones over as soon as possible since they are not under any contract; this I hope will catch on and others will do the same. We can support the other companies and help them grow so that they can also provide better cell service and then we the people will have a choice, NOT TO GET SCREWED.
    Verizon, you are going to be the reason that a lot of time is going to be wasted in your stores because of processing numerous returns and a lot of Fed Ex charges on you for people retuning your trash items…unless you want to get it right the first time and or BECOME AMERICAN again and restore the 30 day policy.
    Verizon’s 4G network and or MOTO products still have so many bugs in them that you might as well keep your 3G and wait for another year or so until they fix everything and stop their devious, deceptive tricks, restore the 30 day policy and start selling products that work out of the box. Verizon, you wouldn’t be the first large company that is going to fall if you keep doing this kind of business. See yea on the news.
    One comment for Moto: Do you really want to associate yourself with a company that treats their customers like this? I guess Birds of a feather flock together…and get shot together.
    Yours Truly,
    One very, very, VERY angry customer
    There, I helped you out so that a few people would at least read it. As it was, I doubt anyone would trudge through that WALL of text.

  • To capture the selected rows along with edited field contents in alv report

    Dear All,
             I do have requirement where, in alv report output one field is editable and need to save the content of the edited field along with the selected rows.
             For example If there are 10 records displayed in the alv output with 20 fields.
    Out of this 20 fields one field (say XYZ) is editable. Also i have already created a new pushbutton (say ABC) on alv output. Now in the alv output if we maintain some value in the field (XYZ ) for the 2nd and 4th record and select this two records, and when clicked on the pushbutton (ABC) it has to update the DB table.
          I am using the Func Module  'REUSE_ALV_GRID_DISPLAY'. 
          Your early reply with sample code would be appreciated.
    Thanks in Advance.

    HI Naveen ,
    There is an import parameter "i_callback_program" in the function module,
    plz pass the program name to it.
    Capture the command by passing a field of type sy-ucomm to "I_CALLBACK_USER_COMMAND ".  Check the returned command and
    and program a functionality as desired.
    u can try the event double_click or at line selection. there u can use READLINE command to c if the line has been selected.
    In case it is , process the code segment.
    Regards
    Pankaj

  • Create a Procedural ALV Report with editable fields and save the changes

    Hi,
    I am new to ABAP. I have created a Procedural ALV Report with 3 fields. I want to make 2 fields editable. When executed, if the fields are modified, I want to save the changes. All this I want to do without using OO concepts. Please help . Also, I checked out the forum and also the examples
    BCALV_TEST_GRID_EDIT_01
    BCALV_TEST_GRID_EDIT_02
    BCALV_TEST_GRID_EDIT_04_FORMS
    BCALV_TEST_GRID_EDITABLE
    BCALV_EDIT_01
    BCALV_EDIT_02
    BCALV_EDIT_03
    BCALV_EDIT_04
    BCALV_EDIT_05
    BCALV_EDIT_06
    BCALV_EDIT_07
    BCALV_EDIT_08
    BCALV_FULLSCREEN_GRID_EDIT
    But all these are using OO Concepts.
    Please help.
    Regards,
    Smruthi

    TABLES:     ekko.
    TYPE-POOLS: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      line_color(4) TYPE c,     "Used to store row color attributes
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE slis_layout_alv,
          gd_repid     LIKE sy-repid.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
    fieldcatalog-no_zero     = 'X'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
    fieldcatalog-edit             = 'X'
      fieldcatalog-col_pos     = 5.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      APPEND fieldcatalog TO fieldcatalog.
      CLEAR  fieldcatalog.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    FORM build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
      gd_layout-info_fieldname =      'LINE_COLOR'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                i_callback_program      = gd_repid
                i_callback_pf_status_set = 'STATUS'
                i_callback_top_of_page   = 'TOP-OF-PAGE'
               i_callback_user_command = 'USER_COMMAND'
               i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
               it_special_groups       = gd_tabgroup
               IT_EVENTS                = GT_XEVENTS
                i_save                  = 'X'
               is_variant              = z_template
           TABLES
                t_outtab                = it_ekko
           EXCEPTIONS
                program_error           = 1
                OTHERS                  = 2.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      DATA: ld_color(1) TYPE c.
      SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
       UP TO 10 ROWS
        FROM ekpo
        INTO TABLE it_ekko.
      LOOP AT it_ekko INTO wa_ekko.
        ld_color = ld_color + 1.
        IF ld_color = 8.
          ld_color = 1.
        ENDIF.
        CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
        MODIFY it_ekko FROM wa_ekko.
      ENDLOOP.
    ENDFORM.                    " DATA_RETRIEVAL
          FORM top-of-page                                              *
    FORM top-of-page.
      WRITE:/ 'This is First Line of the Page'.
    ENDFORM.
          FORM status                                                   *
    FORM status USING rt_extab TYPE slis_t_extab.  .
      SET PF-STATUS 'ALV'.
    ENDFORM.
          FORM USER_COMMAND                                          *
    -->  RF_UCOMM                                                      *
    -->  RS                                                            *
    FORM user_command USING rf_ucomm LIKE sy-ucomm
                             rs TYPE slis_selfield.            
      DATA ref1 TYPE REF TO cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          e_grid = ref1.
      CALL METHOD ref1->check_changed_data.
      CASE rf_ucomm.
    when 'SAVE'.
    get all the modified entries and store them in an internal table and udpate them in to the required transaction or your custom table.
    endcase.
    endform.
    ENDFORM.
    here u need to 2 performs for PF status and USER_COMMAND in the ALV parameters.
    create a custom PF status and create push buttons and assign your ok codes in your PF status.
    if the field has to be edited in the ALV then pass EDIT = 'X' for that field in the fieldcatlog preparation.
    Hope this will help you.
    Regards,
    phani.

  • How do you get a line with MULTIPLE fields to WRAP ?

    How do you get a line with MULTIPLE fields to WRAP ?
    Good afternoon everyone...
    THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
    HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
    If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
    A……………………… B
    XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
    But what if A is too long? I would want to see B wrap onto the next line like this:
    A……………………………………………………B
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
    YYYYYYYYYYYYY
    And similarly….if B is extra long, can the line print as:
    A………………………. B
    XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
    YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
    I don’t want the case where B is long and I get:
    A………………… …B…
    XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
    ………………………..YYYYYYYYYYYYYYYYYYYYY
    I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
    My SPECIFIC CASE
    I have a report that I have stripped down to a simple structure for the purposes of this explanation.
    My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
    Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
    The LAYOUT MODEL has a group frame (the main , base one)
    On top of this is a repeating frame based on the 1st group (family data).
    On top of this is another repeating frame for the 2nd group (species data).
    On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
    The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
    All fields on the report line have variable horizontal elasticity.
    The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
    Can the line be made to WRAP????..
    In my current report, 1 of 2 things is happening:
    1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
    2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
    But I would like a LONG line to continue printing onto the following line of the same page.
    I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
    I have been focussing my attention with this problem on the frames .
    We are using REPORT BUILDER V 6.0.8.26.0
    Thankyou to anyone who may offer assistance.
    Tony Calabrese.

    Steve,
    you gain 1 thing, but you lose something else!
    This thing is SO frustrating!
    Hey Steve! Good afternoon.
    I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
    So it looks like:
    &col1 &col2 &col3 &col4 &col5 etc etc etc
    And the line expands nicely to each field's requirements.
    And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
    The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
    So I wanted something like (ignore the dots):
    ...................................ppppp
    AAAA BBBB CCCCC DDDD EEEE FFFFFF
    So the field of 'ppppp' appeared slightly higher on the line than the other fields...
    I can't see how I can do this with a single TEXT field containing all the &COL values.
    Have you ever come across anything like this?
    Thankyou again,
    Tony Calabrese 12/4/2007

  • How do I use 'submit' as complete pdf, and use 'drawn my signature' with required fields?

    I have created a form with required fields, no problem. The form can be completed with adobe reader, and a signature added using Sign > Place signature > Draw my signature, great. But i need the required fields to be checked and then sent by email, so I have add a button and set the action to "Submit a form" and selected "PDF The Complete Document" from the options. I then add the javascript URL - mailto:????@????.com, but now the "Draw my signature" option is greyed out.
    I have asked this question a number of times, and cannot get a proper answer, please can someone help or offer a work around.

    George,
    Thanks for your response, but I am not sure it fully answers my question. I have attached a screenshot to show what I mean - here I have created a simple form, with one required field for some data, using Acrobat XI. If I open the form (I have not reader enabled the form) in Adobe Reader XI, I am able to add a drawn signature, I could save the document then attach to an email to send as you have suggested.
    But, If I now add a Submit button, set the URL to mail it to [email protected] and select "PDF the complete document" as below
    When I open the document in Adobe Reader now, the signature options are all greyed out as you can see.
    Hope this clarifies my predicament

Maybe you are looking for