Led screen problem

yesterday i accidentally dropped my laptop(compaq610).led screen was gone.i have still warranty for the product. shall i go to the service center and do they change it to new screen for free or else how much do they charge for the screen?can please someone tell me about this?

A cracked screen is not a warranty item. The only coverage you might have is accidental damage insurance which you might have purchased from the store. You would remember because it is expensive, adding maybe $150-200 to the price of the laptop. So don't take it to the Service Center. They might charge $300 or more to replace it. You can do it yourself for maybe $125. Post back if you want to know how.

Similar Messages

  • Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows  "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

    Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
    It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

    I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
    Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
    As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
    DELL   Windows XP Pro  

  • MacBookPro5,1 LED screen flicker on either graphics card on lowest brightne

    MacBookPro5,1 LED screen flicker on either graphics card on lowest brightness setting. Definitely noticeable and annoying when using the lowest power settings to extend battery life during school usage. Has been happening since I got the machine.
    Also new out of the box the screen isn't aligned properly with the base of the unit. Like it got knocked around during manufacture, anyone have this issue?
    Also my serial number does not show up in Apple's systems as a sold machine even though I have a proof of purchase. I called 800 APL CARE to resolve the issue, they were looking into it and haven't gotten back to me either, this was weeks ago....
    Anyone think I should buy APP?

    Your underpowered system may get by if you edit SD DV material, but is way out of its league when editing AVCHD or Red or DSLR material.
    Without further info to go on, you have the following problems:
    Not enough memory
    No dedicated nVidia video card
    Insufficient PSU
    No hard disks
    About the only thing good about your system is the CPU, but there it ends. Everything else needs to be improved. How much depends on your source material, your workflow, your destination format and all those data were severely missing.
    Edited for content (personal comments)
    Message was edited by: Jerry Klaimon

  • No backlight on led screen

    Hey,
    I have a HP pavilion dv6-3000so Notebook PC, and it works just fine, but I got a problem with the backlight on my LED screen. The PC was in the rain, and after that my screen had no backlight. So I opened my laptop to check the motherboard and about 1cm/a halv inch from the screen connector I found a "smoked" or "burned" fuse or resistance. It says "CB83" right by it's side. Please help me

    Hello madpire,
    Welcome to the HP Forums!
    Sorry to hear about your notebook. Rain and electronics aren't the best of friends.
    If you can clearly see a burned out capacitor on the motherboard you're looking at a hardware issue. The motherboard is not a part that you can easily change. Not that it can't be done, but after changing a motherboard the product and serial numbers need to be cloned to the device to allow the recovery to be run. Your best option here is to contact our phone support department for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    Sorry for the bad news, I hope this information helps.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • T400 question: get 2765T6U or pay more for LED screen & misc

    Hello,
    I'm planning to buy the T400 but got a quick question for you guys. I found the T400 2765T6U at Provantage for about $1200. 
    Unfortunately, this model only comes with a CCFL screen and a few missing features (multiple card reader for example). I then went to Lenovo and configured the Enhanced T400 model with the features I wanted and ended up with $1400 (after a 10% off coupon).
    Do you guys think it's worth it paying $200 for the LED screen, a slightly faster CPU, a bigger HD (though slower), and a 7-1 reader? All the other features are exactly the same as the 2765T6U.
    Thanks in advance!!

    You could try this model: 2765-33U
    http://www.provantage.com/lenovo-276533u~7LENO10Y.htm
    It is like the 2765-T6U but it has LED WXGA+ screen and 9 cell battery.
    The only problem is that it is a "special order" so you may have to wait longer for it to ship (as they do not have it ready in inventory).
    Try looking at the tabook.pdf for more models. To get tabook, just google "tabook" and download the .pdf from the IBM website.

  • IPad white screen problem

    see here --> http://www.youtube.com/watch?v=gMpM5mPQRpI
    I have an iPad screen problem where the display is all white. It can only be put back by attaching and detaching the Apple Smart Cover (original from Apple).
    Now the screen has a white "halo", it seems the white screen burned the LED or something.
    I'll take this to the Apple shop later... but since this is Manila, it's just a "premium reseller", not an actual Apple store with Apple geniuses and technicians...
    Smart cover is 21-days old. iPad is 14 mos old. iOS 7.0.4
    Is there any fix without having to send it back? Unfortunately I think my ipad is out of warranty. I am in the Philippines.

    Try resetting it. Press the home and power button down for about 10 seconds no then turn it back on.
    Regards
    J

  • X230 Screen problem

    Hi,
    I just recieved my second x230 laptop and having problems with the screen. The screen is constantly shimmering and it 's much more obvious when the background is set to dark grey. This is the replacement that I just recieved and It still has the same problem. On the first one the trackpad was loose and had the screen flickering problem so I asked for a replacement and this one the same screen problem and also the battery does not fit in properly even when I lock both sides there is still a big gap on one side and it's quite loose. I m totally disappointed with the Lenovo quality control. but also tired of sending them back and forth as I believe the next one will probably have some other problems. What I already tried:
    1- BIOS updated
    2- All the video drivers updated
    3-Increased the ram to 16GB
    None of them solved tthe issue. By the way this is an IPS display.
    I would appreciate any response  if someone had the same problem and managed to solve it somehow.
    Thanks,
    Ale
    Solved!
    Go to Solution.

    Does it change with increasing brightness ? You might be sensitive to slow pulse modulation used to control brightness of the LED backlight.
    As for the flickering with some pattern I can see it as well on my X220. Even my NEC 2090 UXi professional monitor has the issue when turned on but it slowly disapears in few hours. The reason is fully explained here http://www.lagom.nl/lcd-test/inversion.php and there is probably no solution for that in notebook display segment. It is unlikely that you got two boxes with the issue that will be just a bad luck but there might be a batch of displays that exhibits the issue more than others.
    Another reason might be FRC used to simulate 8 bit colors resolution per channel. The X220/X230 display is very likely e-IPS technology that is limited to 6 bit only. The particular FRC implementation might also exhibit annoying flicker effects for some color combinations.
    Sorry, I don't have any good advice. Buying a LCD monitor is always a nightmare for me because there are too many possible issues that would annoy me. On the other hand, X230 is currently the only Lenovo notebook that have a decent display. Other models have TN craps only.

  • LED screen on X200s died!

    Hi all,
    the illumination on the LED-screen of my X200s has dies now for the 4th time! Has someone else experienced something similar?
    I can see the faint content on the screen, and I can use an external monitor. Everything is working fine, except for the illumination of the screen.
    Has anyone else experienced something similar?
    thanks in advance,
    vok

    Sounds like a display power supply problem or could just be a loose connection.  You will need to have Lenovo fix it.  Should be a warranty issue

  • Eye Strain induced by LED screens

    I am an eye doctor in australia and have encountered an unusual amount of computer induced eye strain. What have others done to try and minimise this problem?
    There seems to be a big issue with the intense light of LED screens. Has anyone tried one of the new Benq no flicker screens in reading mode?

    I was having a lot of problems with my iMac and could only work on it for very short periods without my eyes hurting. It got to the point where I was going to sell it. I changed the colour temperature in Display settings from 6500 to 5250. The picture looked a bit yellow at first, but I soon got used to it and it is now very much better.
    One possible explanation is that white LEDs have a very different spectrum to normal white light (e.g daylight). They are usually made by coating a blue LED with a phosphor that converts some of the blue light to yellow. The combination looks white but the spectrum has an enormous spike in the blue. It is possible that this is more tiring for our eyes.
    The spectrum is shown in this article:
    http://en.wikipedia.org/wiki/Light-emitting_diode#Phosphor-based_LEDs
    I can't detect any flicker with the iMac screen. One way to test for flicker is to wave your hand rapidly in front of the screen. You get a "strobe" effect if it is flickering. Another way is to look at the screen through a digital camera (e.g. iPhone). Any flicker will tend to show up as stripes.

  • How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

    Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update  to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
    The Background/history
    I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8.  I created a single partitioned drive to install windows 7 professional 64 bit.  The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in.... 
    The installation of Windows 7 Pro 64-bit
    So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black....  in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
    The problem, re-emphasized :  I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files?  not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run...  Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver  without having been able to complete the windows 7 installation because the monitor goes and stays black????
    This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
    Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
    ---I've been told to install the osx dvd and run "setup.exe"  - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
    ---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/  for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
    ---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

    hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something?  if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean?  it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
    Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this?  just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600?  (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
    So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
         1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
         2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

  • Trying to update OS to fix White Screen problem.

    Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

    Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

  • Mid 2010 MacBook pro took a keyboard spill.  It still works but display is sooo dark - like no backlight.  I think this is an LED screen.  Does anyone know the fix for this?

    Hi all...  My mid 2010 MacBook Pro took a keyboard spill.  It still works but the display is very very dark.  A faint image can only be seen at an angle in very bright light.  I think this model has an LED screen.  Can anyone please tell me what the fix for this is?  Thank you sooooo much! 
    < Email Edited By Host >

    Spill Cleaning
    Some liquid has just spilled into your Mac. What should you do?
    Do
    Immediately shut down the computer and unplug the power cord.
    Remove the computer's battery (if you can)
    Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
    Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
    Note what was spilled on your Mac.
    Bring the computer into an Apple store or AASP as soon as possible.
    Don't
    Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
    Don't shake the computer (this will only spread the liquid around).
    Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).

  • Screen problem making iPad unusable

    My iPad2 is 15 month old and has developed a strange screen problem. It seems to have developed a mind of its own, typing ahead with random characters, doing its own thing when scrolling and trying to select in apps. Two days ago Apple support said restore to factory settings which I did. Same problem came back. Yesterday Apple support said the same thing which again I did. Same problem came back Today Apple support say it's a hardware issue out of warranty. We had a polite discussion about EU legislation but to cut a long story short, they basically said "sorry about that, but there is nothing our policies will let us do, you're on your own"
    Not exactly the response I hoped for. So I've now got an iPad that is basically useless, unless I want to use it as a door stopper.
    My business made a strategic commitmnt to Apple in Mid 2011 and this iPad was part of our shift away from PC/Windows. It's the first time I have needed to deal with Apple Support, and while each of the people I have spoken to have been professional, understanding and helpful, they have been unable / not allowed to assist any further.
    Yes, we could have taken out Apple Care Agreements. We chose not to on the basis of 2 year statutory warranty and Apple's reputatiuon for reliability. Seems I made a big mistake here and am left wondering if we made the right decision in going down the Apple route. Our investment in Apple hardware and software is massive for an SME and our workflow depends on iPads.
    I'm left with a problem. Thanks Apple.
    I'm still a fan but my blinkers have been removed. No longer will you be giveen the benefit of the doubt when you screw up - Maps, WiFi etc - as you have had a direct and negative impact on my business and missed a chance to keep a very happy customer on board.
    Does it help to post this? Not really, but it's off my chest.

    And you are within your "rights" to post this. But you do realize that we are not Apple employees - correct? We are just other users like yourself. If you feel that you have been treated unjustly, move up the Apple chain of command. Politely demand to speak to the next higher up and go from there.

  • Screen problems with photoshop elements 10

    I installed Photoshop Elements 10 and Premiere Elements.
    Premiere Elements works allright, but Photoshop E 10 gives screen problems.
    De menu's on the top roll out, but there is no text in them.
    The screen in Organiser is distorted.
    I reinstalled P E 10 but the same problem accurs.
    I dit a computer reset to an earlier date and installed Ph.E. 10 again but the same problem. No text in the topmenus and a distorted screen in Organiser.
    Letters become 6x larger than normal.
    All my other programms work fine. I never had screenproblems.
    I use Elements 8 now again and that works fine.
    I use: Windows 7
    Card: NVIDEA GeForce GT 220 resolution 1680x1050
    Do I have to remove Elements 8 before installing Ellements 10? Is that perhaps the problem?

    Ken, The problem is: The buttons don't work. So I cannot use Edit...
    But:
    I reïnstalled Adobe Elements 10 for the 4th time
    Cleaned my register again.
    restarted my computer
    Did a computer reset to an earlier date
    Installed Elements 10 again but .......not the try version of Premiere Elements.
    Now Elements 10 has a normal screen.
    This was a try and error sollution. I hope it will last.
    Jan

  • Can anyone identify screen problem that freezes (pic)

    Can anyone identify my screen problem that freezes? Alternately I get this image all over screen (see pic) or just a few horizontal dotted lines.
    I have to force reboot.
    Any thoughts appreciated.
    iMac27, 3.5Ghz i7, 32 Gb ram, 3T drive.
    Mavericks 10.9.5
    I use the Adobe CC suite the most.
    Thank you.
    ETRE report prior to this image
    Problem description:
    iMac keeps freezing and returning to login
    EtreCheck version: 2.0.11 (98)
    Report generated 4 November 2014 2:45:09 pm AEDT
    Hardware Information: ℹ️
      iMac (27-inch, Late 2013) (Verified)
      iMac - model: iMac14,2
      1 3.5 GHz Intel Core i7 CPU: 4-core
      32 GB RAM Upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 0/DIMM1
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM1
      8 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      NVIDIA GeForce GTX 780M - VRAM: 4096 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:15:11
    Disk Information: ℹ️
      APPLE SSD SD0128F disk0 : (121.33 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Boot OS X (disk0s3) <not mounted> : 134 MB
      Macintosh HD imac27 (disk5) /  [Startup]: 3.11 TB (2.84 TB free)
      Core Storage: disk0s2 120.99 GB Online
      Core Storage: disk3s2 3.00 TB Online
      SAMSUNG HN-M101MBB disk1 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      disk1s2 (disk1s2) <not mounted> : 999.86 GB
      Boot OSX (disk1s3) <not mounted> : 134 MB
      SAMSUNG HN-M101MBB disk2 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      disk2s2 (disk2s2) <not mounted> : 999.86 GB
      Boot OSX (disk2s3) <not mounted> : 134 MB
      APPLE HDD ST3000DM001 disk3 : (3 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk3s1) <not mounted> : 210 MB
      Recovery HD (disk3s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD imac27 (disk5) /  [Startup]: 3.11 TB (2.84 TB free)
      Core Storage: disk0s2 120.99 GB Online
      Core Storage: disk3s2 3.00 TB Online
    USB Information: ℹ️
      VIA Labs, Inc.          USB3.0 Hub             
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Wacom Co.,Ltd. Intuos PTS
      VIA Labs, Inc.          USB2.0 Hub             
      Fitbit Inc. Fitbit Base Station
      Apple, Inc. Keyboard Hub
      Apple Inc. Apple Keyboard
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
      LaCie Little Big Disk
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.wacom.kext.wacomtablet (6.3.9 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.adobe.AdobeCreativeCloud.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.wacom.wacomtablet.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.fitbit.galileod.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.koingosw.MacCleanse4Helper.Reminder.plist Support
      [loaded] com.koingosw.MacCleanse4Helper.TrashWatcher.plist Support
    User Login Items: ℹ️
      Creative Cloud Application (/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app)
    Internet Plug-ins: ℹ️
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      EPPEX Plugin: Version: 4.1.0.0 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      QuickTime Plugin: Version: 7.7.3
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
    Safari Extensions: ℹ️
      Dashlane
      Pin It Button
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      WacomTablet  Support
      Backup size 2.00 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          7% Safari
          5% WindowServer
          4% WacomTabletDriver
          1% WacomTouchDriver
          0% powerd
    Top Processes by Memory: ℹ️
      241 MB WindowServer
      213 MB com.apple.WebKit.WebContent
      206 MB com.apple.IconServicesAgent
      206 MB Safari
      172 MB mds_stores
    Virtual Memory Information: ℹ️
      27.84 GB Free RAM
      4.04 GB Active RAM
      708 MB Inactive RAM
      1.76 GB Wired RAM
      518 MB Page-ins
      0 B Page-outs

    I ended up calling Apple Support twice. After first time when we checked drives etc, the second time they said we had done everything and it must be a hardware issue. It had to have a logic board replaced.

Maybe you are looking for