Left Arrow "Goto Previous Frame" Not Working in Projects

When trying to navigate around the timeline in a project, I can press the "Right Arrow" key on the keyboard to navigate to the next frame in the timeline from the playhead. When I try and press the "Left Arrow" key to navigate to the previous frame, the project is de-selected and the selection jumps up to Macintosh HD above the project (or if editing a project on another drive, it jumps up and selects that Drive). Pressing the left arrow key again collapses that Drive and all the projects on it are hidden.
I can skip 10 frames in either direction just fine by pressing Shift-Left or Shift-Right, but for some reason cannot skip backward frame by frame without the project being de-selected.
If I choose a clip in the Event Library, I am able to navigate frame by frame either direction just fine with the Arrow keys - it only seems to be a problem in an actual project.
Any ideas?
Thanks!

When trying to navigate around the timeline in a project,
Is this really in the timeline, or in the Project Library? It sounds like you're in the Project Library. In there, yes that's the way the arrow keys work. They're used to navigate through projects and folders. Event Library works the same way.
After the drive collapses with the left arrow, you can use the right arrow to open it. If you want to slow play through the project hold K and L. If you want frame by frame inspection, hold the K key and tap the L key. Or open the project into the timeline panel.

Similar Messages

Web Gallery, previous/ next not working consistently

First time I've seen this: next and previously are not working good. Some work in the gallery, some don't.
Reboot Firefox, some different ones work, some dont. It's worrisome. I'm sending this to people- any tips?

.Mac email can be set up two different ways on the iPhone. For "Send to Web Gallery" button to appear when clicking on the action button while viewing a photo, you must have your .Mac email set up as IMAP. This is the default setup for a .Mac email account.
If you take the time to manually set up your .Mac email as POP, then you will not have the "Send to Web Gallery" option and you will be unable to successfully email into your web gallery even if all else is set up correctly.
To check to see how you have .Mac email set up on your iPhone, go to the Home Screen, tap Settings, tap Mail, tap your .Mac account name, tap Advanced, move down on the page, and make sure you see "IMAP Path Prefix" setting (it can be blank and does not need to be changed). If the "IMAP Path Prefix" is there, then you do indeed have your .Mac email set up as IMAP on your iPhone.
If you do have it set up as a POP account, you can delete that mail account by selecting the red Delete Account button when viewing your email account as listed in Settings.
To add your .Mac email account as an IMAP account, from the Home Screen, tap Settings, tap Mail, tap Add Account..., tap .Mac, and fill out the fields with your information, tap Save and it will verify access to your .Mac email account.

Project on demand/click to run not working in Project Online

Do I need to do anything special to allow the click to run functionality in Project Online to work? Or does it not work for Project Online?
We have a Project Online trial, but when the users who do not have Project Pro on their desktops, try to select Edit the project in Project Pro, they get an error saying that Project Pro needs to be installed first.
I would have expected click to run to download it.
I feel I may be missing something basic here.
Any advice please?
Ryan

Project Online in itself is not sufficient. You need Project Online with Project Pro for 0365, or another Office 0365 sku that includes Project Pro.
Assuming you have either of these, then the admin has to assign the Project Pro licence to the user (admin | users and groups)
Check out the following screen shot
Ben Howard [MVP] | web |
blog | book

Goto previous frame or next frame not working

I'm using flash professional to build mobile application.
I have goto and stop frames on frame 1 and they work fine. When I go to frame next frame and try to add go to previous frame from a button it doesn't work. I don't get errors or anything it just doesn't work.
Someone please help.

yes I have multiple frames. Frame 1 is 1-10, frame 2 is 2-10 etc.....
This could easily have 50 frames or so because the app has tons of pages. Here is the code:
/* Stop at This Frame
The Flash timeline will stop/pause at the frame where you insert this code.
Can also be used to stop/pause the timeline of movieclips.
stop();/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
w1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);
function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void
    gotoAndStop(12);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
traffic.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void
    gotoAndStop(92);
beauty.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
    gotoAndStop(25);
}/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
video.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
    gotoAndStop(35);
}/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
news.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_6);
function fl_ClickToGoToAndStopAtFrame_6(event:MouseEvent):void
    gotoAndStop(55);
}/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
grant.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
    gotoAndStop(75);
}/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
p1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
    gotoAndStop(85);
}/* Click to Go to Frame and Play
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and continues playback from that frame.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
gossip.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_11);
function fl_ClickToGoToAndStopAtFrame_11(event:MouseEvent):void
    gotoAndStop(11);
Here is the code to the next frame but it won't do anything:
bk_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToPreviousFrame);
function fl_ClickToGoToPreviousFrame(event:MouseEvent):void
    prevFrame();
Once I get out of the the first page or frame I notice when I hover over the button it notices that it's a button but it won't click to go to next or previous frame. None of the button actions work once I get out of the first page.

Mouse Forward/Back Button - Frames not Working

FireFox 4 - The mouse back button (programmed Alt/left arrow + Alt/right arrow) does not support browser window with split panes - multiple scrolling window panes. The front/back mouse buttons works with the left window pane, but not the right frame does not work. This worked in previous version.

If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Removal of Alt + Shift + Left Arrow (goto prev document)

Adobe Reader 9 has removed this option. The option Shift + Left Arrow does work as long as you have not changed pages in the current document.
I still use Acrobat version 7 and find that many of our Cds no longer work properly. I need the Alt + Shift + Left Arrow for compatability reasons and because often I change page in the current document and then want to go back to the page I was looking at in the previous document.
Has anyone else experienced this problem?
Peter Abbott

Hello -- Has there been any resolution / update re the removal of Alt + Shift + Left Arrow [go to previous document] option?
I created thousands of links in multiple pdf documents in Acrobat V8 for readers who now have Reader 9 and can't navigate them... this is a disaster!
How can Adobe software functionality go backwards like this?

Crystal Report orange link arrow to SAP B1 not working

Hello,
I couldn't find a way to insert the actual "arrow" icon into a Crystal report so I copied one from one of the Crystal Reports imbedded in SAP B1 9.0. I subsequently edited the hyperlink to point to the document number I wanted.
From the Format Editor dialog box, Hyperlink, the hyperlink website address is:
http://$b1$/link?table=OPCH&key=1
There was a formatting button to the right of the website address line. Clicking on it yielded a formula workshop dialog box that I edited as follows:
'http://$b1$/link?table=OPCH&key='+ToText({OPCH.DocNum},0,"","")
The Crystal Report runs fine in B1 and shows the link arrows. Hovering the cursor above the hyperlink in print preview yields the specific information for that record. For example, when the report shows A/P Invoice #4394 the screen shows a small pop-up with "http://$b1$/link?table=OPCH&key=4394". Clicking on the arrow brings up a window with a blank! A/P invoice with the cursor located in the "Vendor Invoice No." box (OPCH.NumAtCard field).
Why is this not working to bring up the correct A/P invoice? There are no errors indicated.
Thanks for any assistance.

Thank you, Nagarajan.
Those instructions are exactly what I've done with my report. However, the instructions start with the phrase "manually insert link arrow into Crystal report". OK, I did a Google search on "insert link arrow" and "crystal" and "reports" and "SAP" and there was only ONE webpage with these words on the ENTIRE internet--the page you sent me to. Crystal reports online help has nothing relating to a "link arrow". If there's some special aspect of this link arrow that I'm missing, it sure is a secret because there's nothing out there on this subject. I guess I'll have to copy the graphic from previous reports each time I need to do this.
CORRECT ANSWER:
In any case, I was able to resolve the issue by changing the text in the formatting dialog box from OPCH.DocNum to PCH1.DocEntry and it worked. Why it worked is beyond me. Guessing seems to be the one defining feature of doing work with SAP B1.

ActionScript 2 issues: previous button not working

Hello,
I am trying to create a slideshow in Flash CS4 using ActionScript 2.
I have imported "pause" and "play" buttons from the libraries, and I have created "next" and "previous" buttons by using the PolyStar tool.
Here is my problem: The "previous" button is not working. However, the other buttons (even the "next" button, which only really has the opposite code) do work.
I am writing all of my code in the frames, which probably isn't the best idea, but it would be hard for me to change now.
Code (an example code frame)(currently on the 1st frame):
prev.onPress = function(){
gotoAndStop("14");
begin.onPress = function(){
play();
pause.onPress = function(){
stop();
next.onPress = function(){
gotoAndStop("2");
previous.onPress = function(){
gotoAndStop("14");
"prev" is an instance of "previous". "begin", "next", and "pause", are instances of a play button, "next", and a pause button. I am using frame labels that go from "1" to "14".
What am I doing wrong?
feffer1218

Thanks for your advice, but it didn't work.
1. I changed all of my frame labels so that they have the letter "p" in front of all of them. (ex: "p1" instead of "1")
2. I commented out the "previous.onPress" code.
2 examples of code:
//p1 (first photo)
prev.onPress = function(){
    gotoAndStop("p14");
begin.onPress = function(){
    play();
pause.onPress = function(){
    stop();
next.onPress = function(){
    gotoAndStop("p2");
/*previous.onPress = function(){
    gotoAndStop("14");
//p2 (second photo)
begin.onPress = function(){
    play();
pause.onPress = function(){
    stop();
next.onPress = function(){
    gotoAndStop("p3");
prev.onPress = function(){
        gotoAndStop("p1");
I don't know what I'm doing wrong! The Properties window says that "prev" is an "instance of: previous."
Any ideas? Thanks for the attempt, though.
feffer1218

GotoAndStop to previous frames dont work

Hey guys. I've been looking for an answer to my problem, but until now I just can't find anything.
Here is the deal, I have a movie clip with several buttons and the following code:
stop();
btnOperadorComputador.addEventListener(MouseEvent.CLICK, btnHandler);
btnOperadorComputador2013.addEventListener(MouseEvent.CLICK, btnHandler);
//Call another buttons
function btnHandler(event:MouseEvent) {
    switch (event.currentTarget.name){
        case "btnOperadorComputador2013"    : gotoAndStop(1); break;
        case "btnOperadorComputador"            : gotoAndStop(2); break;
        //etc...
        default: break;
     trace(event.currentTarget.name);
When I run the swf, i am able to press all the buttons in order, until the end of the timeline. But, if I manage to click on a button to go to a previous frame, the click is 'ignored'. The console doesnt print anything and nothing happen.
If someone is interested, I uploaded the file in this link: ouromoderno.com.br/sample.fla
If anyone can help me, I would be very happy!
PS. Sorry for my english.

You can put all the buttons on a single layer rather than adding a new layer for each button. The important part was not to add any keyframes to that button layer or that tells Flash to "initialize" the button on that frame as if it never existed and would then no longer be attached to the button press code. You could have selected all the keyframes in the existing layer you had and just chose to remove all keyframes and you'd be fine.
I did note your issue with the button being visible when that section was open and that could be fixed in a variety of ways. One of which is simply to drag the layer containing the buttons under the content layer. When the content is shown for any specific button in the same position as the button it will be on top and therefore cover the button anyhow.
Glad you got it working nonetheless. You're welcome and good luck!

Control-Up/Down-Arrow key combination does not work anymore

Hello,
I have a problem that occurred in the last week, not sure if it happens due to 2 security updates that came in via Mac OS X software update. I am unable to assign Control-Up-Arrow or Control-Down-Arrow anywhere in applications! Right and left arrows are working fine.
Examples:
1) in Xcode Preferences, try to assign Control-Up-Arrow to any item in the menu. It doesn't work for me, it's as if I hadn't pressed that key combo. But I am able to assign any other key, Control-Right-Arrow, for example.
2) in Logic Pro 9, I tried the same in the keyboard shortcuts dialog. Control-Left/Right-Arrow are working fine, but Control-Up/Down-arrows cannot be entered.
3) at last, I wrote my own little dummy test Cocoa application in Xcode, and I assigned Control-Up/Down-Arrow to 2 menu items in Interface Builder, and assigned some action. The action did not work when I pressed the shortcut. But it does work with Control-Left/Right-Arrow. Also clicking the menu items with the mouse works, even when configured to control-up/down-arrows.
I checked Universal Access in system settings, and mousekeys is off.
I installed these sw updates last week: Xcode 3.2.4, Security Update 2010-005 + 2010-006. Was anything changed about the key combinations?
Could anyone confirm or deny my findings? It used to work before the sw update. What could have possibly happened to Control-Up/Down-Arrows?
Thanks for any help, it's appreciated!
Message was edited by: Sven Thoennissen
Message was edited by: Sven Thoennissen

It turned out that the Control-Up/Down-Arrow shortcuts were taken by the Spaces app - even though Spaces was disabled! The problem was fixed by enabling Spaces and disabling it again.

My Left-click on mouse is not working on mac os 10.8.2 mac mini. Please help ?

Thank you for reading and helping out !
All of a sudden, my left click on microsoft optical mouse stopped working. Then it worked for sometime then permanently stopped working after an hour. (its been 24 hours now). It was working fine before.
Here is what I have tried so far.
Tried Replacement optical mouse, which was not detected. so can't even use a replacement mouse.. it only seems to recognize original mouse and respond to it only.
I have turned Bluetooth off so that shouldn't be a cause.
unplugged keyboard and still left click on mouse not working.
unplugged computer and all cables for more than 6 hours.. still not working...
couldn't zap pram (for some reason being a microsoft keyboard ?? would you have proper instructions on how to to do this in windows keyboard??? )
My Specs: mac mini 10.8.2 with microsoft ergnomic keyboard and basic microsoft optical mouse.
i appreciate any help you would provide to get this solved!
Thank you.

Java for OS X 2012-006: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality

Hp pavilion g6-2305tx left side usb 3.0 not working after installing windows 7 home premium

Hi ,
The left usb ports are not working on my pavillion g6 2305tx after a fresh win 7 installation. Already installed chipset drivers, but this doesnt solve the problem.
Please check the screenshot below.
Kindly help.
Thanks

Hi,
Please try installing window 7 USB 3.0 driver for the following issue
For Win 7 64 bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?
cc=us&lc=en&dlc=en&softwareitem=ob-102571-1
For Win 7 32 bit
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescript
ion.jsp?
cc=us&prodSeriesId=5260575&prodNameId=5260578&taskId=135&swItem=w
k-106309-1
Regards,
Sumit
I am an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Kudos if my post helped you.

Effects and key-frames not working on some clips Premiere CC 2014

Hi. I am having an issue where effects and key frames applied to both audio and video are not working, but only sometimes. Even after I render or export the video, the effects are not showing up. For example, trying to adjust volume using key-frames on some clips works fine, and not at all on others. The key-frames show up and I can see the volume changing in the effects panel, but it is not happening. Another example is changing the opacity on some video clips and it does not work sometimes. Same thing, I can see the key-frames and the values changing, but it's not actually happening. I have uninstalled and re-installed premiere pro and media encoder with no luck. I have uninstalled and re-installed the latest Nvidia drivers with no luck. Just to restate, this only happens on some clips and rendering or exporting the video does not help. My computer specs are:
MSI GT60 Laptop:
Intel Core i7 4800MQ (2.70GHz)
16GB Memory 1TB HDD 128GB SSD
NVIDIA GeForce GTX 880M 8GB
2880 x 1620 16:9 3K Display
Windows 8.1 64-Bit

Here is the exact screenshot. Now I'm also trying other effects as stated in my original post. But this effect is just an example. Is there really something that I'm doing wrong here? Or am I forgetting something? Is there some special "adobe doesn't let keyframes work on mpg's" rule or something silly like that?
I wish that I could post a video, but I don't know how.
Please let me know what I need to do to make this work properly.
TEX

Arrow and space keys not working on websites

I can't seem to get my arrow keys or space keys to work playing flash games on websites. An example would be this game: http://progressivefastandfurious.com When this game starts the car does not move anywhere because the keyboard keys won't work. What's odd is that they seem to work everywhere else (ex: typing doc etc.) This is not related only to this site but pretty much any flash or shockwave site that needs the use of the arrow keys. I also get weird responses when using the extended keyboard with the dashboard calculator. I assume these are coming from the same issue. I bought a new keyboard and my old one does the same thing.
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.7) 2GB DDR RAM, airport, bluetooth

I take back the "extended keyboard not working in calculator" it seems to be working now. As for flash, not so much. I also found out it is all keys that do not work in flash. Here is a good example:
http://www.miniclip.com/games/base-jumping/en
That game asks you to it any key to get started. I was not even able to do that. I also had focus set on the flash movie so I know it should have worked.
In another game which is not flash but shockwave (director compiled file):
http://www.miniclip.com/games/on-the-run/en/
Hit the how to play button. The "P,S, and R" keys work but the other keys do not while playing this game. I am starting to thing I have some sort of accessibility thing turned on that interferes with certain keys. Anyone know of anything that may effect this?

User Login - go to previous URL not working

Hi
I have a user login set up using the DW server behaviour.
The problem I have is that the redirect to the previous url doesnt work and always directs a successful login to the default successful login page.
The problem seems to revolve around this part of the code:
                if (isset($_SESSION['PrevUrl']) && FALSE) {
                    $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
                header("Location: " . $MM_redirectLoginSuccess);
and in particular the use of the && FALSE check. I can see from my debugger that the value of $_SESSION['PrevUrl'] is properly set to the previous url. If I remove the && FALSE check the login works as I would expect and redirects to the previous URL. However, as this is 'out of the box' DW code I am concerned in case removing the && FALSE check may be doing some harm. I have to admit I dont understand the logic of what the && FALSE part of the IF statement is actually checking for.
Any advice and/or reassurance that by removing the && FALSE is not doing any harm or exposing me to any risks would be appreciated.
Thanks

session_start() is set
As I step through the code and watch the variables I can see that the value of $_SESSION['PrevUrl'] is equal to the previous url but $MM_redirectLoginSuccess remains as the default success page.
If I remove the && FALSE element from the IF statement, the value of MM_redirectLoginSuccess is changed to the the value of $_SESSION['PrevUrl'], which is what I want.
So my question is, what is the && FALSE bit doing and why is it there and do I need it?

Left Arrow "Goto Previous Frame" Not Working in Projects

Similar Messages

Maybe you are looking for