LEFT MARGIN INCREASES by 20cm WHEN PRINTING LANDSCAPE IN HP Laserjet 5 printer

HI all,
When we migration to FORM 6/Report 6.0, All reports in Landscape layout are printed with 20cm left margin increase when used HP LaserJet 5 printer. It is OK for other printer like HP LaserJet 4050. The problem does not happen on Report 3.0.
Could anyone help me? I believe it is the Oracle bug.
Regards
Chris Sung

Hello,
There were some printer margin issues early on in the 6.0 and 6i releases. Try upgrading to the latest Reports 6i patch (version 6.0.8.15) and see if the problem disappears.
Regards,
The Oracle Reports Team --skw

Similar Messages

Printing landscape on HP LaserJet

Ever since upgrading to OS X Leopard, I can no longer print in Landscape on a HP LaserJet printer. Does anyone know how to fix or get around this issue? Thanks.

This is the *Using your iPod nano* forum.
Try over here -> http://discussions.apple.com/category.jspa?categoryID=235
or here -> http://discussions.apple.com/category.jspa?categoryID=194

How do I print a configuration page to find the printer code for my laserjet printer to eprint?

How do I print the configuration page to find the printer code for my laserjet p1102W?

Guide here:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HT5194 I updated to OS 6 on iPad2 n updated iTunes 11. n made iTunes as restore. After the updates when I open notes they are all gone !!! When I open Notes it says New notes and the left margin is blank. When I try to Search in notes nothing found. Pls

I updated my iPad OS to and also updated iTunes to 11.1.2 and selected iTunes as restore while still sync with the HP Laptop. Now when I open Notes every note is gone! I have to get all my notes back someone please help! Thanks 728

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Cannot print Landscape report to PCL printer - Solved

Has anyone been able to print a landscape BIP PDF to a PCL printer?
I am on EBS 11.5.10.2, with BIP 5.6.3, and PASTA 3.0.4.
The first report template I tried creating (Discrete Job Pick List Report) in XML Publisher / BIP happens to have a landscape layout, 11 inches wide by 8.5 inches high.
The report is created successfully as a PDF, but I can't get that PDF to print successfully on my PCL printers - the output is truncated on the right. It looks like it is trying to print the landscape report on portrait paper.
Not sure if that makes sense. It is not rotating the report contents to fit on the paper.
I configured PASTA as instructed in MetaLink:
Note 338990.1 - How To Print XML Publisher PDF Reports Via The Concurrent Manager,
Note 356501.1 - How to Setup Pasta Quickly and Effectively, and
Note 365111.1 - How to Setup Pasta for PCL Base Printers
I submitted a TAR/SR on this and they referred me to
Note 421358.1 - Custom Landscape Reports In PDF Format Print in Portrain Orientation
And basically told me what I was trying to do was not normal, and that I should get a PostScript printer. That's not an option, since all of our printers do PCL, but not all of them do PS.
Has anyone been able to achieve this?
Thanks,
Steve
Edited by: user650442 on Oct 8, 2008 11:55 AM
(changed original subject to add 'Solved')

The SR conversation on this topic ended with "EBS does not have any seeded code or driver that can covert a PDF file to PCL, however. If such a third party tools exists, it can be placed (called) within the preprocessing section of the pasta_pdf.cfg configuration file." The documentation recommends "acroread", but I think this is an obsolete utility, plus it doesn't do PCL.
I could not find a third party tool to convert to PCL in the preprocess section of PASTA, while doing landscape, but I did find a third party tool that can replace the "ntPrintCommand" part of PASTA. It is called "GSPRINT", and it is part of GSview. I am on a Windows platform, so this is perfect for me, since it works with the Windows printer drivers at a bitmap level, and no PCL or PostScript conversion or preprocessing is necessary on my part. It takes the PDF as input directly, and prints it.
Here is the essence of my pasta.cfg file now (named pasta_gsprint_landscape.cfg)
outputFormat=text
ntPrintCommand=c:\utils\gs\gsview\gsprint.exe -printer "{printername}" -landscapeThe outputFormat=text so that PASTA will not do anything except preprocess and print. I took out the preprocess, so all it does is print using gsprint.
Since this makes pasta pretty much just overhead, I'm going to look into the option of running gsprint directly and taking pasta out of the loop completely.

Printing problem with HP LaserJet Printer since Mavericks Installed

Hello,
I'm working on iMac and I have recently installed OSX Mavericks.
I have now printing troubles with my printer HP LaserJet P1102w.
Sometimes it prints, sometimes it doesn't.
When it doesn't print I often need to suppress the file in the printer task and then print again. And there it works.
I have tried to solve the problem by installing all the HP drivers, and also made a Reset printing system, but it does'nt change anything.
Any Idea ?
Thank you for any help.
François

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Best printing protocol for hp Laserjet printer?

I have a small office network of 12 computers running 10.4.11 and 10.5.6 and 2 hp Laserjet printers. I have historically used Bonjour to set-up the printers, but have found that periodically the users cannot print because the printer cannot be found. This seems to happen randomly or if the ethernet is ever unplugged/plugged into the printer. I have to delete the printer and re-add it to return to normal functionality. Obviously a pain for multiple computers. I've recently explored the use of the IP printing to these same printers using "IPP', "LPD", and "HP Jetdirect Socket" and the printers IP address on the network. This set-up seems to be more resilient to changes, however, I do not know enough about the different protocols to make an educated decision on which is the best for this environment. I have found that I can print remotely when connected to the VPN through these protocols.
Can someone please advise which protocol would be best suited (and why)?
Thanks

Thanks.
Out of curiosity...why LDP over IPP? What is the difference? I've tried both, and can't tell a difference. Not sure if one is a newer protocol?

Cannot print to a HP laserjet printer

Running iMac OSX 10.4.11 with HP laserjet 1200. Printer selection in print dialog box will not change from PostScript file to Laserjet even tho
laserjet 1200 is an option. Message box says selection failed. It will change to an Epson printer which I do not want to use.

My printer is on line. can print from Photoshop CS3. My problem is with inDesign CS3

CS5 Print preview window heavly inconsistant with left margin

I can adjust my images to look fine in the print window display with the paper size I select. However the printed image does not accurately track what is shown in the preview.
It does not matter if I print borderless or with border.
I suppose it is a minor quibble in that moving the preview image left margin to the right (positive values) by small amounts the print out actually moves it to the left by that small amount. At first I thought this might be random paper alignment errors but the behavior is too consistent. But as I continued my tests I could not significantly/consistently shift the image to the right until a movement finally happened between 1/2 and 6/10ths of an inch. Only then did I get the actual 6/10th white border on the left side of the printout.
What the heck am I doing wong? Is this a bug? The old print preview was so much better as it gave a WYSIWYG output. Now it seems to be a crap shoot whether your border adjustments match your desired shift.
This is too blatant of an error to be a bug, so what am I overlooking? There seems to be some kind of rasterization of the movement going on I don't know about.

That's a bit surprising, in that I've found HP in general to support their released hardware better than most when a new OS is released.
But it's not unheard of. Manufacturers don't benefit measurably by supporting old hardware, though it's a no-brainer that doing so builds brand loyalty. In fact, I'm sure there are marketeers in these companies that actually believe forcing you to buy a new device is a Good Thing. The printer is not supposed to be a consumable!
Scanners are more often devices that fall into this trap. Over time I've thrown away two perfectly working scanners (one Canon and one Mustek) because they weren't supported by their manufacturer upon release of a new version of Windows. On the other hand, my little, cheap HP 932c printer is still perfectly supported in Windows 7, even though I bought it back in the days of XP. Perhaps it has something to do with numbers of units sold.
Anyway, best of luck getting things worked out. I'm very sorry to hear that HP may be going the way of the other manufacturers.
-Noel

Trouble printing landscape PDF

I am having difficulty printing a pdf document that is in a landscape orientation. The first page prints correctly, but subsequent pages either print lower and to the left on the page or they print in a reduced size and to the lower left. I am able to duplicate this issue in both Adobe Acrobat 11.0.05 as well as Adobe Reader. I do not have the issue if I print using Preview on Mac OS X. I am using Acrobat and Reader on Windows 7, 32 bit.

Some of docs are not created by me but are available as studies on
websites. On our docs, we import into InDesign. No, it does not print
correctly if I select landscape rather than auto. And sometimes I select a
page range to print and the command is ignored and prints the entire doc.
Gayle Epp | Partner
EJP Consulting Group, LLC | 7 Greenough Avenue | Jamaica Plain, MA
02130
(617) 477-9319 (phone) | (866) 584-1256 (fax*) *| (617) 596-4756(cell)
[email protected]
www.ejpconsultinggroup.com
From: rarainford [email protected]
Sent: Monday, January 20, 2014 9:38 AM
To: eppg
Subject: Trouble printing landscape PDF
Re: Trouble printing landscape PDF
created by rarainford <http://forums.adobe.com/people/rarainford> in *Printing
& Prepress* - View the full
discussion<http://forums.adobe.com/message/6031443#6031443

C4795 partial printing landscape Dell XPS720 W7 64bit

My HP c4795 printer will not print landscape output correctly.
It displays correctly in print preview but the output page is portrait and only has text on 2 inches of the left side of the page the rest is blank. It does not seem to matter what application I am printing landscape from. Portrait prints correctly.
I have un-installed and reinstalled the driver and patches from the HP website.
Not sure if it is related but some time back I upgraded from Vista to W7.
Thank you.

kwee,
This article should help resolve your partial pages:
http://goo.gl/RLWU3
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HT4356 Can you request an airprinter to print landscape?

I want to Be able to print pictures from Frame Maker on my Canon airprinter but they're not printing properly. How can I control the print set up with my iPad2.

You can print landscape to an AirPrint printer. I've done it from Numbers and from Maps. The app needs to support it however. You'll probbaly want to request this as a new feature from the FrameMaker creators.

Does anyone know how to fix a problem printing with HP Laserjet printer?

We've recently begun experiencing problems when trying to print to our HP Laserjet printer. The iMac system seems to recognize the printer, but the print job gets "held up" in processing and never prints. We can turn the printer on and off and then one print job will be executed. However, then the system "freezes up" again and we have to repeat the whole process of turning the printer on and off. Very strange and frustrating. Especially, since the printer was working fine until recently.
Any help would be appreciated!

Are you definitely running 10.6.7 as your profile says, or could you be on 10.6.8. If it's 10.6.8 quite a few people have reported printing problems.
Have a look at this thread: https://discussions.apple.com/thread/3137602?start=75&tstart=0
Worth perusing the whole thread but 'velocius' seems to have posted a solution that has worked for several people (make sure you use the correct entry - 3 from the end of page 6).
If you are on 10.6.7 you could try 'resetting the printing system'. System Preferences>Print & Fax and Control+Click on a printer listed on the left and select 'reset printing system'. All your printers will be deleted and need to be added again, but it might help fix the problem.

HELP!!! My MacBook & Printing with an HP LaserJet P1006

I've been trying to print using an HP LaserJet printer, but everytime I go to the print window, there is an exclamation point next to the listed printer which doesn't allow me to print.
All help I've read about suggests going to the "print center" to fix this. Which is what I would do on my old powerbook and ibook, simply deleting print jobs and starting over.
However, I can't seem to find the Print Center on my macbook. It's just not there. When I go to Utilities, there's no printer access links there either. Nor does the printer icon show up in my dock as it used to do with my other printer and on my other computers. Am I missing something in my system?
What's going on? Can anyone suggest a fix?
Much thanks in advance...

I had this problem. The computer wasn't recognizing the location of the printer in all MS Office 2004 documents. You need to delete and add the printer.
To delete and add the printer, follow these steps:
1. On the Sys Pref menu, click print & Fax.
2. In the next window, you will see the HP Laserjet P1006 listed in your list of available printers.
3. Click to select (i.e. highlight the HP P1006) in the Printer list.
4. Click Delete.
5. Click Add.
6. In the Connection Method list, click the connection method that is used by your printer.
7. In the Printer list, click the printer that you want to add, and then click Add.
Go back to your Office document and try printing. Hope this helps.

BMP image not printing on LIPI Dot MAtrix printer

Hello everybody .
I am facing a promlem while printing a signature ( bmp image ) in a report .
In print preview it is showing coreclty but while printing to LIPI Dot matrix printer model TALLY 2500 that Signature( bmp image ) is not getting printer.
Can anybody let me know wether any setting is to be done from SAP side .
Thanks in advance .
Regards
Dhaval..

Hi Raje,
Try to take the print in inkjet or laserjet printer
just for confirmation purpose .
if it prints in that and doesn't print in dot matrix then the problem is with the dot matrix.
In that case ask the basis guys to install the relevent device driver for that dot matrix printer( as normally they would have installed some generic driver ).
Hope this helps.
Regards,
Guru
*mark helpfull answers

LEFT MARGIN INCREASES by 20cm WHEN PRINTING LANDSCAPE IN HP Laserjet 5 printer

Similar Messages

Maybe you are looking for