Legacy mailboxes to user mailboxes

Hello,
1) I need to provid a list of legacy mailboxes. How can I get that lsit using pwer shell command?
2) from that list I will later need to change the legacy mailbox to User Mailbox.
I only know how to change legacy mailbox to User Mailbox for one user but not from a list of many user (prior questions)
Set-Mailbox -Identity "alias" -ApplyMandatoryProperties
Can you please help me?

~ First of all, Exchange 2003 mailboxes show as Legacy Mailboxes in EMC and there isn't any problem in it.
~ If mailboxes are on Exchange 2007 server and shows as Legacy then it should have either created or moved with Exchange 2003 management tools which is the cause of showing it legacy. For your reference :)
Now back to your answer...
1) Use below cmdlet to get the list of legacy mailboxes...
Get-Mailbox -ResultSize Unlimited | Where{$_.RecipientTypeDetails -eq "LegacyMailbox"}
2) Use below cmdlet to get the list of legacy mailboxes and apply mendatory properties (But use this if you have all mailboxes on Exchange 2007 server ONLY)
Get-Mailbox -ResultSize Unlimited | Where{$_.RecipientTypeDetails -eq "LegacyMailbox"} | Set-Mailbox -ApplyMandatoryProperties
Amit Tank | MVP – Exchange Server | MCITP: EMA | MCSA: M | http://ExchangeShare.WordPress.com

Similar Messages

  • GRC 10 - Legacy connector as user detail data source

    Hello, 
    I'm trying to use a legacy connector (with a text file as input) as a user data-source.
    Repository user sync for this legacy connector works : checked GRACUSER table, it is populated with all the user details from the input file (id,firstname,lastname,mail,department,phone
    I got it working for user search data source : when creating an access request for "other" user, searching for a user ID/name works : data are displayed in search result, however when I select the user from the serach result the user details are not populated in an access-request form.
    Any clue about this ? Any one already got this working ?
    GRC 10.0 SP13.
    Checked SP14 and SP15 release notes, and found no relevant notes yet.
    repository-related notes applied :
    -1864423
    -1950231
    Regards,
    Emmanuel.

    Hi Pedro,
    You only have confirmed that 2 accounts are maintained in HCM and in SU01 as well, so you would be able to see these accounts' details both ways.
    Yes, you are right about user account maintenance first in HCM at the time of new hire, then you can manually raise the access request to grant them access to various SAP systems. Or in order to automate this process as Prasahant suggested, you can take help from HR Triggers.
    You can refer: GRC 10.0 - HR Trigger configuration - Governance, Risk and Compliance - SCN Wiki
    But responding to your original discussion, whatever user accounts are maintained in HCM you would see those details provided you define HR for the "user search data source" AND from SU01 for "user detail data source"
    In your case you have 2 accounts which have been maintained in HCM as well as SU01, so that is what creating confusion for you.
    Let us know if you need any more clarifications.
    Regards,
    Ameet

  • Legacy vs User mailbox

    I understand the difference between the two. My question is; why would some moved, 2003 mailboxes' recipient type be Legacy while others, also moved from 2003, are User Mailboxes?

    Hmm well technically that shouldn't happen and;
    I take it that no one converted just some of the mailboxes and forgot to do others?
    All mailboxes are 100% moved to 2010?
    The mailboxes were all migrated via mailbox move, i.e. you didn't by chance create a mailbox for a user on 2010 and then export to PST from 2003 and import into 2010?
    Perhaps this article will help
    http://anandthearchitect.com/2010/12/06/legacy-mailbox-in-exchange-2010-solvable-mystery/
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Error While Attempting to Uninstall Exchange 2013 Mailbox Servers

    Hi everyone,
    We recently migrated all of our users from Site A to Site B. Now, I'm trying to remove the Exchange mailbox servers that were in Site A, since we're going to be decommissioning the site. All of these mailbox servers have been removed from the cross-site
    DAG, and all other services have been moved over to Site B as well (mail flow, CAS, etc). However, when I try and uninstall Exchange from any of the seven mailbox servers (I've tried it on two so far, with the same result), I get the following error at Step
    7 of 11:
    Error:
    The following error was generated when "$error.Clear();
              & $RoleBinPath\ServiceControl.ps1 DisableServices $RoleRoles.Replace('Role','').Split(',');
              & $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
            " was run: "Service 'Microsoft Exchange Information Store (MSExchangeIS)' cannot be configured due to the following error: The specified service has been marked for deletion".
    If I exit the Uninstall sessions, and then reboot in order to try again, it just states "An incomplete installation was detected. Run setup to complete Exchange installation." It appears that all Exchange files are still on the server too, however,
    the server in question is no longer listed in the EAC under the "Servers" section.
    Any ideas?

    Hi,
    According to this error, this issue may be caused by legacy PF database replicas and legacy Mailbox
    store pointing to the PF database. Please try to delete the legacy PF database container from ADSIedit.msc, the run setup and reboot the server to solve this issue.
    The path in ADSIedit should be like this:
    CN=Mailbox Database ,CN=Databases,CN=Exchange Administrative Group ,CN=Administrative Groups,CN=Your company name, CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Your company name,DC=com
    Please collect other relative events in Application logs for troubleshooting.
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Recovering mailbox from offline EDB file

    We went from Exchange 2003 to 2007 on a totally separate box.  During migration, some users were shown as legacy mailboxes.  They are pointing to the old server.  This old server (Windows SBS 2003) has been decommissioned and exchange has
    been completely removed from the server.  I was able to look through the files and find a large EDB file which I believe houses these legacy mailboxes.    This EDB file is not mounted at all.  They reside in an archived folder which may
    have been created from another administrator for backup purposes.  How can I go about pointing these users to this file or possible exporting the contents of the EDB file.  I'm not trying to spend any money on 3rd party software.  I figured
    there must be a way to point to this file and/or mount it to our existing exchange server.

    I've followed these steps and other found online with no luck.  I am using the Microsoft Exchange Troubleshooting Assistant.  I made sure DB was in a clean state.  Moved the DB to RSG folder and tried mounting.  
    I tried renaming the database to "Mailbox Database".  If I do not, when I try mounting, it does not show the actual DB name that I copied into the RSG folder.  When attempting to mount im presented with the following error: Received
    the following error: Error code: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=-1213)
    When creating a new RSG, it mentions "only databases from the linked storage group can be mounted in the recovery storage group".  SO I decided to move the DB's to the First Storage Group directory, thinking I would be able to pull the correct database.
     Upon creation, it asks for Transaction log folder, system folder and database folder.  I tried several times to point to the recovered database file, all failing on me.  For example:
    Under "Database folders and file names" shows Mailbox Database.  The Database path is pointing to the First Storage Groups Mailbox Database and the Recovery database path is pointing to the RSG folder.  However, when I try to change this to point
    to the ACTUAL DB that I copied over, it wont let me create the RSG.  Only way around is the keep everything defaulted. I then copy the DB files to the RSG folder, try to mount and presented with the above error....

  • Mailbox Move Not Complete - Unable to make admin interface connection to server.

    Hello,
    I have added a second exchange 2007 server and have moved over 20 mailboxes to the new server. I seem to have a problem that the mailbox move has not been completed properly. I'm getting errors in the event log that the search indexer cannot connect to the
    admin interface. I'm also unable to login as any one of the users who I've moved to the new server.
    Here's one of the errors I'm getting:
    Exchange Search Indexer has temporarily disabled indexing of the Mailbox Database Third Storage Group\Mailbox Database 03 (GUID = d4f3ee4d-68b0-4d21-8a76-ee96bf298f34) due to an error (Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError:
    Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
    Diagnostic context:
        Lid: 10648   dwParam: 0x6D9      Msg: EEInfo: Generating component: 2
        Lid: 14744   dwParam: 0x6D9      Msg: EEInfo: Status: 1753
        Lid: 9624    dwParam: 0x6D9      Msg: EEInfo: Detection location: 501
        Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
        Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
        Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
        Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: EP-SW-EX04
        Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -1988875570
        Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
        Lid: 24060   StoreEc: 0x80040115
        Lid: 23746 
        Lid: 31938   StoreEc: 0x80040115
        Lid: 19650 
        Lid: 27842   StoreEc: 0x80040115
        Lid: 20866 
        Lid: 29058   StoreEc: 0x80040115
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Int32 ec, DiagnosticContext diagCtx)
       at Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain, String password)
       at Microsoft.Exchange.Search.NotificationWatcher.NotificationWatcherThread()).

    Hello,
    I have been fighting today with the migration off my old SBS2003 server to a brand new SBS2008 server. I have been preparing this migration for a couple off weeks
    now (watching videos, reading migration manual from Microsoft, searching TechNet, etc.)
    After some troubles with installing the server in Migration mode if finally came to the part to move my old (legacy) mailboxes to the new SBS2008 server. At this point the drama started  @#$@$#&^%%#$@
    I followed the manual off Microsoft which descripted how to move these mailboxes.
    Exchange displayed a error message :
    MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
    When I googled this error message I realized that many people encountered the same problem but no one had the right answer to this question. I have searched hours and hours to find a solution. It started to drive me crazy and to make it even more worse i discovered
    that even though i completed the first step in the migration proces (update the schema to allow a SBS2008 DC to join the domain) my replication with the other DC controllers came with a schema mismatch error???? WTF is going on !!!!!!!!
    Finally a brilliant college off me came with the answer that solved all my problems: To GET RID OFF THIS ERROR MESSAGE INSTALL: Messaging API and Collabration Data Objects 1.2.1  on the Exchange server.
    After moving about 60 mailboxes my blood pressure dropped and became stable again.
    I Have on finall question WHY Microsoft?  Was this to much trouble to put this in het migration manual off 81 pages?
    from-a-very-disappointed-microsoft-user
    PLS: send me a reply if this solved you're problem moving the mailboxes to the new server. !

  • Accidently removed a mailbox on the SBS 2008 server during the migration from SBS 2003

    I accidently removed a legacy mailbox from the SBS 2008 server while still doing the migration from SBS 2003.  I meant to click on the Move Mailbox like the instructions said but clicked on the Remove option, then clicked the 'X' to close the box since
    I figured that would cancel what I did however it removed the mailbox from the SBS 2008 list.
    Please tell me that I can get it back.  It still shows up in the old SBS Exchange System Manager but now when an email is sent, it sends back a no delivery message.  It's like the account doesn't exist any more.
    Can it be recovered and if so, how?
    thanks,
    Jeff

    Hi Jeff,
    Would you please let us know current situation of this issue? Just check if above suggestions can help you.
    If any update, please feel free to let us know.
    In addition, please also refer to following article and thread, and then check if can help you.
    How
    to use a Recovery Storage Group in SBS 2008
    How
    to recover a deleted user and mailbox on SBS 2008
    Hope this helps.
    Best regards,
    Justin Gu

  • OAB not updating on Mailbox Server 2010

    I have searched the forums and have not found a solution.
    Statistics: Two Mailbox servers with Exchange 2010 SP3 RU6. One CAS/HT with Exchange 2010 RU6.
    OAB last date modified on the generating Mailbox server is August 28 and today is September 8. Several changes are not showing up in the Offline Address Book.
    The LZX files and oab.XML show up on the mailbox server I set as the generating server, however they never update. I have restarted every server and still the same problem persists. I have restarted FDS on the CAS and BITS on the MBX. Moved the generation
    server several times. Ran Get-OfflineAddressBook | Update-OfflineAddressBook -verbose and see no errors. There has to be something simple that I am missing.
    Thanks,
    Don

    Hi
    Have you moved mailboxes from older Exchange Versiones? If so, please use this command to check legacy Mailboxes.
    get-mailbox -resultsize unlimited | Where { $_.RecipientTypeDetails -eq ‘LegacyMailbox’ }
    I also recommend you to set the Diagnostic Logging on the OAB Generation Server to Expert for OAB Service.
    http://technet.microsoft.com/en-us/library/dd335139(v=exchg.141).aspx
    Georg

  • How to get material long text at user exit EXIT_SAPLMGMU_001

    Dear All,
    I need to pass some material details from SAP to legacy system once user create / edit a material. I have no problems with fields like material no, type, group etc except the long text, I can't find the long text field from the user exit (EXIT_SAPLMGMU_001).
    When I use READ_TEXT function, also can't retrieve the long text because it haven't save to STXH/STXL table yet, I guess.
    Please help
    TQ

    hello Chong ,
    if it havent saved yet , then try to pass  document no as '$0000000001'( in most of cases it will work but i'm not sure abt ur transaction ), it should work..
    regards
    Prabhu

  • AES-256 user home directory sparse image bundle in Lion?

    Snow Leopard and previous had file vault to protect users' home directories as, I believe, AES-128-encrypted sparse image bundles. As I understand it now, under Lion, the options are to enable AES-128 whole disk encryption, or, if upgrading an existing snow leopard machine with a legacy file vault user account, to maintain that legacy file vault user home directory. However, under this second approach, additional users' home directories cannot be individually "file-vaulted" and instead, would require that legacy file vault  be decrytped and then the entire disk be encrypted.
    I am thinking that it would be advantageous from a security standpoint if an individual user home directory could remain encrypted, if that user were not actively logged in. Then, all contents would be inaccessible to other users, including administratively privileged users, and also that user's home directory would remain encrypted when the computer was turned on and booted up because as I understand it, file vault 2's real strength lies in protecting "data at rest" versus "data on a powered up and mounted file vault 2 volume".
    To that end, I am wondering, regardless of whether file vault 2 is enabled or not, whether an existing user home directory and all of its contents be converted to an AES-256-encrypted sparse image bundle, using Disk Utility, and exist at the /Users directory space, mounting and decrypting "on the fly" from the login window at user login just like how a legacy file vault home directory is treated under snow leopard, independently of whether file vault 2 was enabled on the whole disk or not. This would also permit later addition/conversion of another "file vaulted" user account whether fle vault 2 were enabled or not.
    To recap, an AES-256-encrypted sparse image bundle that would mount upon user login just like a legacy file vault user home directory does. Does anyone know if something like that is doable, and has that road already been travelled successfully? If so, I'd love to read a step-by-step, play-by-play, set of instructions on how to do just that.

    I think I got a solution worked out.  I don't mind if things get installed in /opt as long as pacman tracks it, and I found ruby-enterprise-rmagick in the AUR as an orphan.  I adopted it, updated it, installed it, and it's working great with my code.

  • Forms User-Exits desupported?

    Hi Folks,
    I've heard that User Exits are not supported after Forms 9i, but I can't find where it says so on the Oracle web site. Does anybody know if and from when this is so, or where to find out? It is specifically Cobol User Exits that I am interested to know about - perhaps they're dropping Cobol but keeping C.
    Thanks
    Phil

    Thanks for your reply, Sandu.
    We've got legacy Pro*Cobol User Exits, and I need to know whether we will still be able to use them on the AS after we upgrade to Forms 10g. Does your reply mean that we need to redevelop them? Where can I find official confirmation from Oracle?
    Thanks
    Phil

  • Are User Exits to be desupported ?

    Are User Exits desupported after Forms 9i? Do you know where to find out, and when support ends? We have some legacy Pro*Cobol User Exits, and we will need to plan ahead if User-Exits are desupported.
    If you know the answer to the question, I would be very grateful for a reply, but please do not bother if you are just suggesting alternatives to User-Exits.
    Thanks
    Phil

    Hello,
    I need for example to check if for a certain material an MRP caracteristic is maintained. Upon checking a Purchase order position, the system should branch to the MARC table of the material and see if the caracteristic is maintained.
    If maintained,,the position of the PO should not be ordered (error message for that position).
    If not maintained,the material can be ordered so the position should not generate an error or warning message.
    I need a check like this,  and with more criteria!
    Thanks for any reply.
    Aart

  • Configure legacy public folders where user mailboxes are on Exchange 2013 servers

    Hello all,
    I have mailboxes on an exchange 2013 server than need access to public folders on a 2010 server before I migrate them over.  I followed the commands in the TechNet article with the subject "Configure legacy public folders where user mailboxes
    are on Exchange 2013 servers" (sorry, I wasn't allowed to insert a link because I wasn't verified?).  The problem is when I run the last command of "Set-OrganizationConfig -PublicFoldersEnabled Remote -RemotePublicFolderMailboxes ProxyMailbox1,ProxyMailbox2,ProxyMailbox3"
    on the 2013 server, using the mailbox name I had created, it says it cannot be found.  Of course I checked and the mailbox exists, is configured properly, and so is the new database.  The 2013 EAC also sees the mailbox with no issues. 
    Can someone tell me why I am getting this error?
    Thanks,
    Shaibal

    Hi Mavis,
    Thank you for your response.  I am the full domain admin, and check and was part of both groups mentioned above.  Also, I have only one 2010 server with public folder, and so the command I am running on the 2013 looks like this: Set-OrganizationConfig
    -PublicFoldersEnabled Remote -RemotePublicFolderMailboxes PFMailbox1. I even just created a second user and mailbox using the console instead of the shell, and still no luck.
    Below is the error I get:
    [PS] C:\Windows\system32>Set-OrganizationConfig -PublicFoldersEnabled Remote -RemotePublicFolderMailboxes PFMailbox2
    Couldn't find object "PFMailbox2". Please make sure that it was spelled correctly or specify a different object.
        + CategoryInfo          : NotSpecified: (:) [Set-OrganizationConfig], ManagementObjectNotFoundException
        + FullyQualifiedErrorId : [Server=ZOR-EXCHANGE01,RequestId=cc567b2f-34d8-41ba-9261-143223566e06,TimeStamp=3/5/2015
        4:36:10 PM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 2EF24201,Microsoft.Exchange.Management.Sys
      temConfigurationTasks.SetOrganizationConfig
        + PSComputerName        : zor-exchange01.zubatkin.lan

  • ActiveSync stops working after migrating from Exchange 2007 to Exchange 2013

    We have started the migration from Exchange 2007 to Exchange 2013. We've followed best practices and everything is working great except ActiveSync. I've performed Exchange migrations in the past so this is nothing new for me. I've also been referring to
    a great guide which has been a big help,
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/planning-and-migrating-small-organization-exchange-2007-2013-part1.html.
    Once a user is migrated from Exchange 2007 to 2013, ActiveSync stops working properly. Email can be pulled to the device (Nokia Lumia 625 running Windows Phone 8) by performing a manual sync. But DirectPush is not working. The strange part is it's not affecting
    everyone who's been migrated. Anyone who is still on Exchange 2007 is not affected.
    At first I thought it was our wildcard certificate. 99% of our users are running Outlook 2013 on Windows 7 or higher but we do have a few terminal servers still running Outlook 2010. Outlook 2010 was giving us certificate errors. I realized it was the wildcard
    certificate. Rather than making changes to the OutlookProvider I simply obtained a new SAN certificate. Although that resolved the issues for Outlook 2010 users, ActiveSync was still a problem.
    Rebooting the phones and removing the email account from the user's device and re-adding it didn't resolve the issue either.
    Then I performed an iisreset on the CAS server. This didn't help either. I didn't know it at the time, but I was getting closer...
    I tried using the cmdlet Test-ActiveSyncConnectivity but it gave me the following error:
    WARNING: Test user 'extest_0d9a45b025374' isn't accessible, so this cmdlet won't be able to test Client Access server
    connectivity.
    Could not find or sign in with user DOMAIN.com\extest_0d9a45b025374. If this task is being run without
    credentials, sign in as a Domain Administrator, and then run Scripts\new-TestCasConnectivityUser.ps1 to verify that
    the user exists on Mailbox server EX02.DOMAIN.COM
    I started reviewing how Exchange 2013 proxied information from the CAS to the mailbox server and realized the issue may in fact be on the mailbox server.
    I performed an iisreset on the mailbox server and all of a sudden ActiveSync started working again. Awesome!
    I can't explain why. The only thing I can assume is when some users were migrated from 2007 to 2013 something wasn't being triggered on the Exchange 2013 side. Resetting IIS resolved the issue. I guess I'll have to do an IIS reset after I perform a batch
    of migrations. Disabling ActiveSync and re-enabling it for the affected users didn't help - only the IISRESET resolved the issue.
    If anyone has any information as to why this happens, please chime in. Also, if anyone knows why I can't run the Test-ActiveSyncConnectivity cmdlet, I'd appreciate the help.
    Thanks.

    Hi,
    In Exchange 2013, the Public Folder is changed to Public Folder mailbox instead of Public Folder in Exchange 2007 database.
    Due to the changes in how public folders are stored, legacy Exchange mailboxes are unable to access the public folder hierarchy on Exchange 2013 servers. However, user mailboxes on Exchange 2013 servers or Exchange Online can connect to legacy
    public folders. Exchange 2013 public folders and legacy public folders can’t exist in your Exchange organization simultaneously. This effectively means that
    there’s no coexistence between versions.
    For this reason, it’s recommended that prior to migrating your public folders, you should
    first migrate your all legacy mailboxes to Exchange 2013. For more information about migrating public folder from previous versions, please refer to:
    http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
    (Please note the What do you need to know before you begin part in this link)
    Regards,
    Winnie Liang
    TechNet Community Support

  • Migrating from Exchange 2007 to Exchange 2013 Public Folders coexistence

    Hi all, I'm migrating from Exchange 2007 SP3 to Exchange 2013 SP1.
    I have an Exchange 2007 server (Client Access, Hub Transport and Mailbox Server) in Site A, mailboxes and Publics Folders
    In another Site in Site B, I have already installed (Client Access and Mailbox Server) Exchange 2013 server.
    I am migrating test users, the fact is that users who migrated to Exchange Server 2013 Public folders do not see.
    How I can make the migrated users from viewing the Exchange 2007 Public Folders duration coexistence?
    Is there a "how to" to migrate Public Folders from Exchange 2007 to Exchange 2013?
    thank you very much
    Microsoft Certified IT Professional Server Administrator

    Hi,
    In Exchange 2013, the Public Folder is changed to Public Folder mailbox instead of Public Folder in Exchange 2007 database.
    Due to the changes in how public folders are stored, legacy Exchange mailboxes are unable to access the public folder hierarchy on Exchange 2013 servers. However, user mailboxes on Exchange 2013 servers or Exchange Online can connect to legacy
    public folders. Exchange 2013 public folders and legacy public folders can’t exist in your Exchange organization simultaneously. This effectively means that
    there’s no coexistence between versions.
    For this reason, it’s recommended that prior to migrating your public folders, you should
    first migrate your all legacy mailboxes to Exchange 2013. For more information about migrating public folder from previous versions, please refer to:
    http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
    (Please note the What do you need to know before you begin part in this link)
    Regards,
    Winnie Liang
    TechNet Community Support

Maybe you are looking for