Lenovo miix 3 lost recovery after windows 10 upgrade ?

I did upgrade with media creation tool, i select "keep nothing", now I have clean activated windows 10. In my disk managment a have c: drive, two small partitions,and also have recovery partition about 5gb size, but when I try to select widnows recovery from tablet boot options, I got a error , "Your PC needs to be repaired A required device isn't connected or can't be accessed. Error code: 0xc0000225" Is that win 8.1 recovery partition or windows 10?

hyI have issue with my recorvery partition. I accidently deleted all,and I didnt have backup of them. So I would like ask, could you share with me this image,what are you have for backup please?thank you for reply. (if you like, please conctact me in privat)

Similar Messages

Lenovo Yoga 3 14 recovery and Windows 10 upgrade

Hi,
I have a few questions regarding Lenovo Yoga 3 14 recovery and Windows 10 upgrade (should be generic questions that apply to other models as well):
1# Will the Windows 10 update and activation change in any way the Win8.1 OEM serial key stored in BIOS? Is there any chance that any software changes that BIOS OEM key (like malware or similar)?
2# After updating to Windows 10, if I put the USB recovery pen drive (created in Win8.1), will I be able to restore the Win8.1 version (factory restore), and successfully activate it and use it without issues?
3# On a clean drive (without any partitions, like for instance if I buy a new one), if I use the same USB recovery pen drive (created in Win8.1) to do a factory reset, will it re-create all partitions, including the recovery partition one?
Thanks

1) Run the Win 10 installation and choose "Upgrade Windows" option. Windows 10 will be installed and it will be activated.
The chance of any software changing the OEM key is insignificant.
2) Yes, you can recover Win 8.1 successfully. No need to activate it, it will be auto-activated.
3) I dont have experience with this but reading around the forum I have seen that using a recovery drive on a new HDD may not install windows and re-create partitions.
The recovery partition is the hardest to re-create on a new HDD, even you are able to re-create it the NOVO button usually doesnt work.
Let me know if I answered your questions. Thanks.

Lenovo G570 has no audio after Windows 10 upgrade

I don't have any audio now that I've upgraded to Windows 10. I've tried various sources including Netflix and music apps. Headphones don't work either. I went through all the steps on this site to no avail. (https://support.lenovo.com/us/en/documents/ht103792) I also restarted the laptop. I talked to Windows support and they told me to downgrade to Windows 8 and try uploadng again-- I'm not sure how that would even work. They also said that Lenovo needed to update their drivers. Lenovo wants to charge me $20 a month to fix the issue. Has anyone else dealt with this issue? Do I have any other options?

Hi: The only suggestion I can offer would be to try the Vista audio driver from your notebook's support page. This package contains the Conexant Audio Driver for the supported notebook models and operating systems.
File name: sp35940.exe You may have to manually install the driver if the auto install doesn't work.

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician.

How do I retrieve lost photos after iOS 5 upgrade?

How do I retrieve lost photos after iOS 5 upgrade? I have never sync'd it to iTunes or iPhone.

All apps on the iPad should be in the iTunes library with iTunes on the computer the iPad is synced with.
http://support.apple.com/kb/ht2519

T440 wifi not working after Windows 10 upgrade

That's all. Any clue?Thank you.

I googled and it seem that the issue is related to the Cisco VPN:https://forums.lenovo.com/t5/Lenovo-Edge-Yoga-LaVie-Z-Flex/Windows-10-Upgrade-No-connections-are-available/td-p/2130314/page/2

Skype does not recognize my headset after Windows 10 upgrade

Hi everyoneSkype stopped recognizing my headset after Windows 10 upgrade. I've tried the solution deactivating the "Allow applications to take exclusive control of this device" option. No success. The headset works on my other Windows 8.1 laptop and my Cellphone. Other applications, including Windows 10 microphone setup for speech recognition work. Here is something strange though. When I open up Skype audio tools and tap the microphone between thumb/finger Skype detects this and shows 4/5 green bars. Any ideas?
Voiceless in Vancouver

Your upgrade haven't changed the drivers properly.
1. Just go to Device Manager and delete the audio drivers.
2. Then restart your pc and switch on the internet.
3. Your drivers will be automatically installed by Windows Update.
** If your problem is solved then Mark this as Answer! **
** Please give Kudos If you want to Thank Me! **

No internet after windows 10 upgrade-Ralink RT3290wi-fi adapter

I have a Ralink RT3290wi-fi adapter . There is no internet after windows 10 upgrade. What i need to do or is there a driver for this adapter for windows 10. Please suggest Thanks Samrat

there are several posts about this on the microsoft forums about no internet after upgrading. here is one that migt help http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/after-upgrading-from-windows-81-to-windows-10-no/42b1852e-4faa-47a2-85ca-dc8e190c7c27 here is another http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/windows-10-network-adapter-problems/3e11b955-1e5f-43e0-8891-7fef24e693dd

Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Lenovo G40-70 - Which is the correct drivers after Windows 10 upgrade

Hi All, After my recent upgrade to Windows 10, I realised that the driver's preloaded by Mcrosoft are different from provided at Lenovo Official Support site. http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g40-70-notebook-lenovo?linkTrack=hp_c1:r1_My%20Products_G40-70%20Laptop%20(Lenovo) So, should I go to update all drivers with the Lenovo's one even everything working fine after the upgrade? Regards,

Hi All, After my recent upgrade to Windows 10, I realised that the driver's preloaded by Mcrosoft are different from provided at Lenovo Official Support site. http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g40-70-notebook-lenovo?linkTrack=hp_c1:r1_My%20Products_G40-70%20Laptop%20(Lenovo) So, should I go to update all drivers with the Lenovo's one even everything working fine after the upgrade? Regards,

Lenovo EasyCam Won't work after Windows 10 install

I have a V570 Lenovo laptop on which I just installed Windows 10. After the install, I found that my camera no longer works -- it's the Lenovo Easy Cam. I tried driver updates. Apparently the drivers were downloaded but failed to install. I can't figure out HOW to get them to install. I tried the device manager. I also took a look with Lenovo Solutions. It says the camera is disabled, but it doesn't tell me how to re-enable it. I'm at a loss. How can I get my camera to work with Windows 10? Thanks.

Hi Swahili1,I have a Lenovo Ideapad Y570 and I have also recently upgraded from Windows 7 Professional to Windows 10. In fact I had the same problem as other persons i.e., the easy camera of my laptop was disable and I couldn't manage to update the drivers correctly and make it function. I did as you described, with the difference that in my case I couldn’t enable the camera from Device Manager. What I did is that I have only uninstalled the program of the easy camera going to: Control Panel\Programs\Programs and Features and then I have restarted my laptop. As you said most probably, Windows 10 detected the camera and installed the appropriate program and now my camera is functioning. Thanks a lot Swahili1.

LOST Touch screen DRIVER after WINDOWS 10 UPGRADE.

Hi I want to ask if the problem about the lost touchscreen HID driver after Windows 10 has been resolved...

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

Ideapad z400 touch after windows 10 upgrade

I am using the ideapad z400 touch and have been upgraded to windows 10. "Intel graphics card => I reinstalled the windows 8.1 driver from lenovo site", and my brightness problem is solved. I am facing the problem with the intel HD graphics 4000 display driver that I install from lenovo site. The driver seems like not fully compatible with windows 10. My screen will turn off after 5 minutes and when I move the mouse to wake it up I face the problem, the screen will freeze for a while and start to wake up and showed me the message "intel display driver.....has stopped responding and has recovered" This happens everytime after my screen turn off. Besides, my pc can't go to sleep mode. When I select sleep for my pc, the screen went black and it takes a long time to sleep but actually it is not, then it will shut down on its own. I have to press the power button to turn it on again. I think this problem is also related to the display driver. I have no problem with this display driver on windows 8.1. Will Lenovo come out the new driver that compatible with windows 10 from Lenovo site? The latest operating system they provide the drivers is untill windows 8.1. If they do not support the windows 10 driver I will roll back to windows 8.1 with no choice but I sincerely hope that I can keep using windows 10 on my pc I like it. Microsoft gives us one month time to roll back to windows 8.1. I don't know can I upgrade to windows 10 again if I found that Lenovo comes out their new drivers

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works. Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use. Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10. Please follow the provided troubleshooting steps and re-post with the results. Have a great day!

After Windows 10 upgrade Mic Conexant 20671 smart audio HD not working

I upgraded to Windows 10 from Windows 7. After upgrade, the audio failed - both Recorder (Mic) as well as Player (speaker) where not working and device was not recongnized in Skype I then got to know (after some internet searching) that Lenovo has released new driver for Windows 8.1 and 10. I downloaded the same (from lenovo site) and installed them in c:\Drivers\Audio . After the installation I followed the automatic installation. However it fails telling Device is not installed. I have also tried to upgrade the software from Device manager. Here it says all softwares are upto date. However mic device driver 10.0.10240.16384 - the date stamp is of today. Under the sound, video , game controller section in the Devce Manager- the device driver for Conexant 20671 is older. This device driver software is not getting upgraded, says all software are upto date. Any pointer to resolve the mic issue is welcome!

I am having the same problem. The path below is the one specified. http://support.lenovo.com/us/en/downloads/ds100832 After downloading the driver, which displays "Windows 8.1" even though I am using windows 10, the install fails saying the device is not installed. Please advise. Thanks.

Lenovo miix 3 lost recovery after windows 10 upgrade ?

Similar Messages

Maybe you are looking for