Lenovo wireless devices settings not function (airplane)
hi team, i facing problem to switch on / off adapter for the bluetooth device
when i switch off bluetooth as per above screen,
the next time i switch on computer, the bluetooth will auto on back...
this has causing me have to manual switch off the bluetooth device everytime on, i just no want the bluetooth exhaust my battery where i not in used.
may i know how to solve this problem?
now i just can permanent turn off the bluetooth adapter, but when want to switch on i have go to device manager and enable the adapter, this has causing lot of inconvinience to me.
devices: ideapad S410P
bluetooth:
Hi guys,
I see that Shiv_K is helping you out on this
In addition.
Try to refresh the Hardware and Power.
Remove AC and Battery
Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
Inside BIOS hit F9 then Enter for Yes to load defaults
Hit F10 to Save and Exit then Enter for YES.
now open
Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
Then install these
Lenovo Energy Management
Intel Wifi Driver
Press Fn+F5 and see if you will be provided with this window showing the bluetooth.
gdvlad
Punch Card
Posts: 17
Registered: 12-26-2013
Location: Romania
0
Re: Bluetooth Not Listed under Device Manager in my Lenovo G580[ Edited ]
Options
04-23-2014 04:58 AM - edited 04-23-2014 05:51 AM
I have the same problem. G580, model 20150. I clean installed W 8.1, deactivating UEFI, but the Bluetooth device isn't discovered. I installed the appropriate driver, but the issue remains. I believe it's a driver issue. How can we contact Lenovo to tell our problem? They don't provide an e-mail adress, unfortunately... I'm wondering why?
EDIT: by reading the post #3 on this thread, by Solid_Cruver, I uninstalled Lenovo Energy Management for W8.1 x64 and installed older version as suggested. Then pressed Fn+F5 as I used to do in Win 7, activated BT, reinstalled appropriate driver and... Voila!, I have functional BT! Yupi!!!
Thank you very much, Solid_Cruver! Good solution!
Similar Messages
-
Lenovo Wireless Device Settings Window is missing, G580 (20150) Windows 8.1
Since upgrading to 8.1 I have been unable to access the window to toggle wireless and bluetooth on and off.
I reinstalled LEM and the airplane function returned, but not the window.
Wireless works after I removed the Microsoft driver. I don't have a bluetooth device to test that function.
I just tried to install the 8.1 64 bit Bradcom Bluetooth driver and it would not install.
Bluetooth isn't listed in Device Manager.
I just found this information, but the link to the older version doesn't work.
I may just by an Intel Network 7260.HMWG.R
Solid_Cruver
Support Specialist
Posts: 3,508
Registered: 04-22-2013
Location: Philippines
1
Re: Bluetooth Not Listed under Device Manager in my Lenovo G580[ Edited ]
Options
09-25-2013 08:38 AM - edited 09-25-2013 08:40 AM
Hi guys,
I see that Shiv_K is helping you out on this
In addition.
Try to refresh the Hardware and Power.
Remove AC and Battery
Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
Inside BIOS hit F9 then Enter for Yes to load defaults
Hit F10 to Save and Exit then Enter for YES.
now open
Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
Then install these
Lenovo Energy Management
Intel Wifi Driver
Press Fn+F5 and see if you will be provided with this window showing the bluetooth.
gdvlad
Punch Card
Posts: 17
Registered: 12-26-2013
Location: Romania
0
Re: Bluetooth Not Listed under Device Manager in my Lenovo G580[ Edited ]
Options
04-23-2014 04:58 AM - edited 04-23-2014 05:51 AM
I have the same problem. G580, model 20150. I clean installed W 8.1, deactivating UEFI, but the Bluetooth device isn't discovered. I installed the appropriate driver, but the issue remains. I believe it's a driver issue. How can we contact Lenovo to tell our problem? They don't provide an e-mail adress, unfortunately... I'm wondering why?
EDIT: by reading the post #3 on this thread, by Solid_Cruver, I uninstalled Lenovo Energy Management for W8.1 x64 and installed older version as suggested. Then pressed Fn+F5 as I used to do in Win 7, activated BT, reinstalled appropriate driver and... Voila!, I have functional BT! Yupi!!!
Thank you very much, Solid_Cruver! Good solution!Hi guys,
I see that Shiv_K is helping you out on this
In addition.
Try to refresh the Hardware and Power.
Remove AC and Battery
Hold the Power Button down for at least 15 sec. Then Reconnect Everything back
Turn on the Systen and Right away start hitting F2 to load the BIOS Utility
Inside BIOS hit F9 then Enter for Yes to load defaults
Hit F10 to Save and Exit then Enter for YES.
now open
Control Panel / Programs, and uninstall Lenovo Energy Management and restart the system
Then install these
Lenovo Energy Management
Intel Wifi Driver
Press Fn+F5 and see if you will be provided with this window showing the bluetooth.
gdvlad
Punch Card
Posts: 17
Registered: 12-26-2013
Location: Romania
0
Re: Bluetooth Not Listed under Device Manager in my Lenovo G580[ Edited ]
Options
04-23-2014 04:58 AM - edited 04-23-2014 05:51 AM
I have the same problem. G580, model 20150. I clean installed W 8.1, deactivating UEFI, but the Bluetooth device isn't discovered. I installed the appropriate driver, but the issue remains. I believe it's a driver issue. How can we contact Lenovo to tell our problem? They don't provide an e-mail adress, unfortunately... I'm wondering why?
EDIT: by reading the post #3 on this thread, by Solid_Cruver, I uninstalled Lenovo Energy Management for W8.1 x64 and installed older version as suggested. Then pressed Fn+F5 as I used to do in Win 7, activated BT, reinstalled appropriate driver and... Voila!, I have functional BT! Yupi!!!
Thank you very much, Solid_Cruver! Good solution! -
Officejet pro 8500A wireless radio is not functioning
Have an OfficeJet Pro 8500A. Wireless connection stopped working. Tried restarting printer, router, and computer per troubleshooting suggestions in manual. No joy. Wireless Network Test Report gives a 'Wireless Working' status of 'FAIL'. Troubleshooting results at top of report says "The wireless radio is not functioning. Contact HP Support."
I found a solution to this problem in the forum for a C7280. It is to reset the printer by turning it off, and holding the # and 6 keys while and a bit after turning it on. Later on, there is a comment by another user saying the reset solution also works for the Officejet 8500.
O.K. so I'd like to try reseting my printer, but don't know how to do it. There are no "keys" on this model. I've searched through the user guide (searched on the term 'reset' in the PDF version) with no results. Can anyone help by either telling me how to use the reset feature on the OfficeJet Pro 8500A, or another solution to the wireless radio not functioning problem that I can try?
Thanks,Thank you for your suggestions. I appreciate your help.
I had previously verified that the wireless radio was on. The wireless radio test report confirmed it was on.
I had not used the network settings reset function as I was focused on looking for a "printer reset" capability. Based on your suggestion I used the network settings reset and then printed the HP Network Configuration Page. This confirmed the settings had been reset. However this test also checks for all available 802.11 networks. The report shows the number of networks discovered as 0. Based on this, I'm assuming the wireless is still not working. -
Deskjet 3050A - wireless radio is not functioning
I cannot connect my Deskjet 3050A-J611g on my wireless network. In attempting to set up the network I get the message: "The wireless radio is not functioning. Contact HP support". The troubleshooting information does not appear to address this problem
ATTENTION The wireless radio is not functioning. Contact HP support
diagnostic results
>wireless
--wireless on pass
--wireless working fail
--signal quality not run
>connectivity
--connected not run
--disconnect count total 74
--disconnect count (last hour) 0
--disconnect count (last 24 hours) 0
>network
--network name (SSID) found not run
--other networks detected matching your networks name no
--wireless networks detected 0
>settings
--printer settings consistent with wireless router settings not run
--no filtering not run
--channel not run
--security not run -
Wireless radio is not functioning on C7250. Reboot didn't fix. #6 didn't fix, wireless light is on, Vista 32 bit, Win 7 32 bit, D-Link DIR-625 router. Worked great for 2 years. Diagnostic says Contact HP support. Other functions work fine. Prints via USB all right.
Thank you for your suggestions. I appreciate your help.
I had previously verified that the wireless radio was on. The wireless radio test report confirmed it was on.
I had not used the network settings reset function as I was focused on looking for a "printer reset" capability. Based on your suggestion I used the network settings reset and then printed the HP Network Configuration Page. This confirmed the settings had been reset. However this test also checks for all available 802.11 networks. The report shows the number of networks discovered as 0. Based on this, I'm assuming the wireless is still not working. -
Photosmart c309a- 'The wireless radio is not functioning, contact HP support'
My Photosmart c309a wont connect wirelessly. Upon running the wireless network test, the report states, and I quote "The wireless radio is not functioning. Contact HP support". The report then states the following:
Wireless on PASS
Wireless working FAIL
and everything following that stated as 'not run'.
Ive searched for other threads on the subject, and the only sloutions I can find are unplug the printer and plug it back in to reset it (made no difference), and try the HP print and san doctor (link was dead, found it manually and didnt work as it cant connect to or even see the printer on the network).
So the question is, is this a hardware fault, and if so what can be done about it?Hello,
Yes, it is an hardware issue and indicates that the Wireless card is not functional.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the white star under my name.
Click "Accept as Solution" if it solved your problem, so others can find it.
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP. -
Couldn't print; computer said printer was not connected. Tried to reconnect to wireless network, couldn't connect. Ran the Wireless Network Test Report, which said "the wireless radio is not functioning. Contact HP support."
Follow the instructions in the manual to reset the printer back to Factory Defaults. Now check the wireless radio status again. If the same, use the front panel to navigate and attempt to enable the wireless radio. Again, check the status after. If it still says it is not functioning, the wireless radio is indeed defective.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
OfficeJet Pro 8500 Wireless Radio is not functioning
I had been using Office Jet Pro8500 Wireless for about 5 months. All the sudden, I lost the network connection. I had been in contact with HP Support and waiting for a call back from them. We had tried to reset the network connectivity (unplug the computer, and press 6 and #) but not successful. I am connected to my wireless network on my computer. I have 2 computers (one Windows 7 and the other Windows XP). I use NetGear for my wireless router, 64 bit with WEP.
I have been reading some messages in this forum, do I have a bad wireless radio in the printer? I have been spending close to 2 hours with HP Support doing various thing, but no luck. They suppose to call me back 1 1/2 hours ago but no one had called yet. :-)
Any suggestion?Hi, thank you. Yes, I have done that. It says: "The wireless radio is not functioning. Contact HP support. "
Diagnostics Summary:
Wireless On - Pass
Wireless Working - Fail.
Network Name (SSID) Found - Not Run
everything else below here are "Not Run" .
Downlink count - 1
I am on the phone with HP Tech Support. I used your suggestion to tell them that I believe that I have a failed radio module in my printer. They are going to send me a "refurbished" basic printer. They assured me that the refurbished is a brand new unit, never used with any customer. It is an overstock printer which they open and take out any accesories and ship it to me. Hope this will work. Hope this is true.
PS: HP asked me to pay for expedite shipping but I politely asked that they will waive the cost because it is a defective unit. They did. But I have to give my CC for "collateral" in case I do not return my defective unit.
Waiting now for that replacement printer.
Thank you for your assistance. -
My wireless radio is not functioning on my hp photosmart c7280
My newtowrk is up and running. I recently had to erase hard drive and reload. My hp photosmart all-in-one C7280 wireless radio is not functioning.
My operation system is Windows Vista Home Premium 64 bit. Hp Desktop Pavilion c6700y.
Is the radio really dead?
This question was solved.
View Solution.Reset the printer. Turn it off, then hold the # and 6 keys while and a few seconds after turning it back on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Wireless network test report says wireless radio is not functioning, c7280
Wireless does not seem to stay on. Printed a wireless network test report and it says, "The wireless radio is not functioning. Contact HP support".
Let's reset the printer - turn the printer off, hold the # and 6 keys while turning it back on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Wireless radio is not functioning
Printer has been working fine but now will not connect to wireless. Tried powering down, unplugged, reset all systems, printed report... It says the wireless radio is not functioning p, contact HP support. Under 'wireless working' it says, fail.
Please perform a Network Reset on the printer and try again. If the same error message occurs, your wireless radio has most likely failed.
-
"Wireless Radio is not Functioning" when Diagnostic Tool is run
I recently unplugged my HP Photosmart Premium C309a and relocated it to a new shelf beside my main computer. Wireless networking worked just fine before the move, and now it won't detect any networks to connect to. I've run the Wireless Network Test Report and it says "Wireless Radio is not functioning. Contact HP support." Is there anything I can do from here to help fix this problem, or do I have to pay for Repair Service somewhere? I would like to believe that this HP product can withstand more than a simple move from one shelf to another....
Any suggestions would be greatly appreciated!
*Note* I know for sure my network is working properly (since I'm connected to it right now...). My computer detects my network as well as a number of others in the neighborhood.
This question was solved.
View Solution.Is the printer still under warranty? If not, yes you can have it repaired, but it may cost nearly what a new printer costs. Here is how to contact HP.
Your printer should be able to work with USB and it should also be able to be connected to your router with an Ethernet cable.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
On a wireless network test report, I get "The wireless radio is not functioning."
The printer is a Photosmart C309a all-in-one. I've used this printer for some time and did so wirelessly earlier today. Upon ordering a print job the printer failed to produce results. I ran a Network Configuration Page where it showed the printer to be offline with no Active Connection Type. I then ran a Wireless Network Test report and received the message: "The wireless radio is not functioning. Contact HP Support." IS THERE A FIX FOR THIS?
I reinstalled the printer software on my computer configuring it with a USB connection, in order to be able to use the printer. I was able to use it with the USB connection but would most definitely prefer a wireless connection. I also turned off the printer, router and computer and turned them on in the order outlined in the user's manual, but to no avail. This, of course, I did before reinstalling the software for a USB connection.Hi,
I afraid the error indicate an an hardware failure..
You may try using a wired ethernet cable as a workaround, the printer will need to be services in order to repair its wireless card.
You may find the details to contact HP support by selecting your region and following Technical Support after you buy:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
my HP C4795 wireless printer
using widows 7
the wireless radio is not functioning. contact HP customer support
first time trying to set up wirelessHi,
As it said, you can click the "Contact HP" above or use the following link:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Error message: The wireless radio is not functioning.
I spent 2 hrs on HP support chat last night, trying to get an answer to whether this is a fixable problem, and finally was disconnected from chat.
The printer is a Photosmart 7460 and it recognizes the network and I could get to its IP addres online. But it printed out its own error message saying that the radio "failed."
Can anyone tell me if this is something I can fix or if I just need to trash the machine and start over?
thanks in advance for your help!
ElizabethI have a C309a that all of a sudden stopped communicating
The wireless radio is not functioning. Contact HP support
Wireless on PASS
Wireless working FAIL
USB communication works
Is there a reset or is the wireless trashed?
Maybe you are looking for
-
Lightroom 4.3 import bug
Why is an image imported into Lightroom 4.3 significantly lighter than the same image displayed in Windows Photo Viewer at the same time and on the same screen? This basic problem also applies when using an external editor such as Elements 11 where t
-
WCF-WebHttp Adapter Substituting Nonstandard Characters In Address URI With Web Encoded Equivalent
I’m using the WCF-WebHttp adapter to send an HTTP Get request to a REST API. The request has to be formatted as shown… http://xxx.xxx.xxx.xxx/HPRMServiceAPI/Record?q=title:test*&format=json Essentially this is searching for any records with “test” in
-
I have a report; sql as follows: SELECT TO_NUMBER(NVL(:P8_BSSCO_VCHR_TTL,0)) AS VCHRAMT, TO_NUMBER(NVL(:P8_BSSCO_PROCARD_TTL,0)) AS AMT, CNTRCT_ID, TO_NUMBER(NVL(:P8_BSSCO_TTL,0)) AS TOTAL FROM PS_LCRA_PROCARD_LD@FS8RPT WHERE BUSINESS_UNIT = 'BSSCO'
-
SharePoint_Config database
We recently switched the SharePoint_Config database to Simple recovery model to control the transaction logs. However, the ldf file still gets larger than the actual database file(mdf). I have researched some of the autogrowth/pre-sizing settings, a
-
Forms6i : FileUpload error FRM-40735
Hi, I try to run the FileUpload demo on Solaris, and I get stuck with the error FRM-40735, ORA-105100 (WHEN-BUTTON-PRESSED trigger) I already read everything concerning this problem in this forum, but I don't know how to check my configuration. I rea