Leopard install default permissions: Custom access

Hello,
I am a very new mac user. Only bought my first iMac 1 month ago. I really liked the experience so far.
I recently upgraded to Leopard, and i had no problems at all (no blue screens, or locked users).
The problem i am going through right now, is about user permissions.
If i do 'Get Info' of my primary hard drive (the one Leopard is installed on), i get 'You have custom access'. I was expecting 'You can read & write'.
I've read a lot about these permissions. I tried a lot of things but nothing worked for me.
To be exact: i am using a leopard installation now, which has been installed from an empty hard drive (before the installation started, i erased everything. Just to make sure there is no conflict with the previous version, tiger).
I've upgraded from tiger, clean installs, and fresh installs (like the one i am using now) all to get the same situation. I really hope this is not intended.
Seen as I am a administrator, i really like to control where i want to write.
I've tried the following:
-i used Tinkertool System to change ACL's. Finally i got the '/' to show me 'read and write' but i had to change the ACL for every file manually, and at a certain moment i couldn't start my system preferences.
-i tried the 'chown -R -N'. Didn't change a thing.
-i tried the 'chown -a# 0 username' (username is babyCreative). Got a message telling me 'No ACL present'...
Now i am working on a fresh format (so the permissions are still the ones, set by default). I can actually do the work i need to do, but i don't feel very 'okay' with this permissions-situation.
PS: what really bothers me is the following: when launching leopard for the first time, and checking those permissions IMMEDIATELY, it tells me 'Read and write'. Only later on, all of a sudden, it changes into 'Custom access'. (right now it already is 'read only, yet i am copying files on it)...
Is there somebody that can help me out with this?
Any help is much appreciated.
(excuse my bad english ;))
Message was edited by: babyCreative

This might be me turning crazy... but right now... My permissions on the primary drive have changed again... Permissions are now 'Read and write'.
when i check out the owner of the drive, i see 'root' is the owner of the primary drive.
I suspected to see my username there...
Anyway: right now my permissions seem to be okay... Will evaluate this during a few days, and post the outcome here...
(i feel pretty bad now: been wasting days to this... Only now realizing the following: patience is a virtue... (so far))
thx for you reply though

Similar Messages

  • Permissions = "Custom access" ? ? ?

    How I got into this mess is a sorry tale, which is hardly worth recreating. What I need is a way OUT of the mess.
    SYMPTOMS:
    My G5 has a 500 GB boot drive, and a 500 GB internal data drive (only data; no OS). The permissions are so bolloxed up that Get-Info shows Sharing & Permissions as follows:
    John (Me) = Custom
    John (Me) = Custom
    (unknown) = Custom
    everyone = Custom
    If I open a Finder window, andlocate the offending drive in Column View -- and click on it -- I get the following dialog: "The folder "DATA" could not be opened because you do not have access privileges."
    If I run Disk Utility, and click on Veryfy Disk, or Repair Disk, the result is "The volume DATA appears to be OK."
    But it's not OK. I cannot get access to the drive, or to the data on it.
    I want to regain access to this data drive. Will someone please tell me, what buttons can I press, to make the devil go away?
    TIA.
    John

    Hi,
    I see you guys have got some insight into the whole "custom access" issue... and I desperately need your advice... in terms I can understand (I'm baffled by a lot of this talk about which permissions I need, etc.).
    Here's the back story...
    1) I had recently updated my Macbook Pro to 10.5.5. And I noticed that my Internet connection would either drop or run glacially slow. Meanwhile, my wife's Macbook ran fine. So I figured something was up.
    2) I tried turning the Airport connection on and off, demanding a new IP, and all that. No luck. Zapping the PRAM once seemed to help. But very shortly we were back to slow speeds. Then I saw something online about trashing many network related preferences and the 'SystemConfiguration" file.
    3) I moved the recommended items out of their locations in the System folder, parked them in a new folder on the desktop (instead of trashing them) and rebooted. No change. And then I thought maybe it would be best instead to just put the files back and look into it later.
    4) When I put the files back, I noted that the system had created a new "SystemConfiguration" folder... which then moved out... and placed in the original SystemConfiguration folder. And that's around about where the real trouble seemed to begin.
    5) I rebooted and discovered that my Airport card was 'Not configured" or something like that. It was as if the card didn't exist. Same seems to be true of Bluetooth. The system just doesn't see it. What's more, I get a "Network Pane" that's completely blank. NO ports listed in the column on the left... NO user name.. etc. Even my "local host" name had disappeared.
    6) That sent me online and I found this article an on folders that have defaulted to a "custom access" discussion. And sure enough... the systemconfiguration folder I had dragged back in had the "custom access" label. So does the main folder/wrapper for my home directory. Plus, the same with many folders inside.
    7) I have "Batchmod" but don't know, in layman's terms, what I should change the permissions to. Am I "user"? Do I "strip the ACLs" or forget about them? Is there some other better option?
    8) I've seen people suggesting to go get a piece of the system network stuff from the pre-upgrade files. But I ran into another problem... related, I think, to all this. And that's simply that my Time Machine can't see the backup versions I did over a week ago.
    9) I'm wondering if I need to do an "Archive & Install"... but then worry it won't work because the busted network settings would come over with it. (This computer was upgraded to Leopard with Archive & Install.)
    10) So then I wonder if I should do a clean install... but I don't quite understand how to "just port back in the contents of your home folder." How does one do that without breaking the applications away from all the little things they installed so they could run?
    I'm sure there's information I'm not providing, simply because I don't know what you'd need.
    But what can I do?
    Hope to hear from you soon!

  • Sharing and permissions, custom access, cant get user to have read and write acess

    Hello everyone, i have a Netgear Stora NAS on my MAC, its located in the finder under shared, when i click on it i sign in with my user account and it gives me my folders to my stora, on one of my folder (Movies), i clicked get info and under sharing and permissions it told me i had custom access, i changed the privelages of the name,"Everyone" from no access, to read and write, when i did this, the name on tope of this (the main username) vanished. so ive been searhing on how to get my privelages back, i went to + and added new GROUP "admins" and it gave me my main username back but now with read only acess, when i try to change it to read and write it dissapears, PLEASE HELPPPPP, thank you!!!!
    <Edited by Host>

    I am not sure why you get that error. One thing you can do is a SMC reset then try to format it again. However that being said I'm not fan of WD external HD's primarily because we see a lot of troubles with them on Macs. Their internal HD's are fine so that narrows it down to their enclosures. If the problem persists I'd return the drive and buy one of the following:
    OWC (www.macsales.com) Mercury Elite Pro series
    Lacie Quadra d2 series
    G-Tech G series
    SMC RESET
    • Shut down the computer.
    • Unplug the computer's power cord and all peripherals.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Attach the computers power cable.
    • Press the power button to turn on the computer.
    PRAM RESET
    • Shut down the computer.
    • Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    • Turn on the computer.
    • Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Big problem with plain blue screen on boot (not related to Leopard install)

    Hi - eventually I have worked out how to post to this forum!
    I have had a major disaster with my iMac this weekend. It began with a lock-up when I was working happily away in Blender. I got a beachball and the machine froze. I had ssh set up so I tried to go in from my iBook to kill a few processes to try to get it back on track, but without success, so eventually I had to hold down the power button to power off the machine.
    When I tried to reboot, I got the grey screen and the spinning wheel, then a plain blue screen with no mouse, no beachball and the machine just seemed to stop. I could hear the CPU going like the clappers and was able to ssh in again and check top to see what was going on, and the WindowServer(?) process was maxed out at 100%. I wasn't able to kill it and again nothing happened and on a further reboot I just had a plain blue screen.
    I have since spent a few hours trying various things to sort this out, so far to no avail.
    - Single User mode, fsck -fy: reports everything fine, no change
    - Reset PRAM, no change
    - Tried booting off my backup Firewire drive (SuperDuper) but it won't boot to it, same blue screen hang
    - Ran Disk Utility from Leopard Install DVD - permissions, checked disk, etc - no change
    - Ran DiskWarrior in Target Disk mode from iBook, no change
    - Ran Tech Tool Deluxe, no change
    - Removed RAM (not third party), put it back in, no change
    - Reinstalled Leopard using Archive & Install, no change
    - Reinstalled Leopard again, using Erase & Install, no change
    - I think I'm running out of options.
    I'd have been on the phone to Apple by now but it's Sunday tomorrow and a Bank Holiday in the UK tomorrow so it will be Tuesday at the earliest, and I know I'm going to be frustrated by having to go through all this with them again!
    A weird thing is - I CAN get logged in in Safe Mode now and again, and when I do, the mouse pointer has a small, almost transparent rectangular graphic attached that follows the pointer around. Barely perceptible but it's there - it looks like a Leopard icon for a txt file but barely visible. Has anyone ever seen anything like this?? It really feels like something has corrupted, but with a totally clean OS install, is that possible?
    As it stands, I'm sure this is a hardware issue but I'm not sure. I had a couple of power outages lately which I suspect are behind this.
    I'd be really grateful for anyone's thoughts on this - it's been a really frustrating couple of days.
    Cheers.

    As far as I can see, resetting the power manager on this model of iMac involves resetting the SMC, which is unplugging all cables for 15 seconds, plugging back in and powering up. Tried that too, same result. In terms of third party software, nothing. Clean Leopard install is the lot.

  • Leopard questions - Permissions and "Custom Access"

    I just (reluctantly) upgraded to Leopard (only because I wanted to install the iLife 09 which requires 10.5.6), and then the Permissions fun started. Install went fine and so did the updates. Then I ran Disk Warrior (new directory, repair permissions, check all files/folders).
    I tried to read all the posts I could find, but none dealt with these particular messages, so I thought I'd ask just to make sure....
    2. I have hundreds of "ACL found but not expected", but all of mine are on:
    "System/Library/User Template/" and then there seems to be every language listed.
    2. There are dozens of "permissions differ on" and they all relate to Front Row (should be -rw-r-r, they are lrw-r-r). I haven't even used Front Row....
    Can I safely ignore all of those?
    And, while I'm asking questions:
    Is the "You have custom access" showing in any Get Info window of any application a Leopard "feature" or what does it mean? When I first checked, I found that several apps (part of OS or third party) did not have me, the admin, with "read & write" access. Some had "read only" and some "no access", but all of them showed the custom access. I went through all the apps and made them "read & write", but the custom access remains. These are apps I use quite often such as Graphic Converter.
    Can I ignore the "custom access" or do I need to do something about it?

    2. There are dozens of "permissions differ on" and they all relate to Front Row (should be -rw-r-r, they are lrw-r-r). I haven't even used Front Row....
    Ignore per Mac OS X 10.5- Disk Utility's Repair Disk Permissions messages that you can safely ignore. They are innocuous and will recur each time you repair permissions.
    1. I have hundreds of "ACL found but not expected", but all of mine are on:
    "System/Library/User Template/" and then there seems to be every language listed.
    These are the result of upgrading instead of doing a fresh install of Leopard. They are basically harmless. Such errors in your Home folder can be repaired using the Reset Password selection from the Utilities menu after booting from the Leopard installer DVD. Check the bottom option to Reset ACLs and click the button. Do not make any other selections. This only affects ACLs in the Home folder. To fix all such items means you have to perform an Archive and Install of Leopard then run the 10.5.8 Combo Updater. If you don't want to do all this then just ignore the issue.
    The Custom Access is the result of the custom ACLs and simply means you've upgraded from Tiger which did not support ACLs while Leopard does.
    In fact there are literally thousands of topics and replies on these two topics throughout the Leopard forums that deal specifically with these particular messages which is why Apple issued the above linked tech note.

  • Help - Lion "custom access" permissions mess

    I should start with an apology... I know there are a lot of threads that dance around this very issue, but it's so much I can't make sense of it.
    So I'm asking anew...
    Here's the situation: After months of persuassion, I finally talked my wife into letting me upgrade her Macbook from Snow Leopard to Lion. After installing, I then ran software update and installed everything else recommended. Reboot and everythign seemed to go fine, but then when I tried to delete a few PowerPC apps, the computer kept asking for her password.
    Wanting to find out why on earth I had to retype the password with every toss of a file, I looked online and found someone suggesting I had to log her out as an admin and then log back in. Why that would work, I don't know, but I tried it. Big mistake.
    When I tried to log her back in to make her an admin again, I couldn't get the computer to accept her password. So I then logged out and tried to log back in with my admin account which is set up on the same computer. That worked to get me in, but still wouldn't allow me to upgrade her to an admin in the system prefs.
    So I THEN found this "resetpassword" trick using the Lion Recovery partition and terminal. I did that and was able to restore her password and while there, I also "reset to default ACLs and Permissions" or whatever it says inside this utility, with the logic that repairing permissions has always been a decent failsafe fix.
    Okay... after a reboot and we're back in... and I run into a new problem with not having permission to do much of everything.
    So, I open the "Get Info" on the hard drive to look at the permissions at the bottom of the info window. It says I have "read only" access. I figure this must be an error so, perhaps foolishly (or should I say probably foolishly), I grant Read & Write access across the board, so it reads like this:
    System - Read & Write
    Wheel - Read & Write
    everyone - Read & Write
    And then, don't cringe, I apply to all enclosed items.
    When this is done, I rebooted to the Lion Recovery partition and ran the Disk Utility "repair permissions" there, too.
    Upon reboot...  I remember Keychain First Aid and run that too. It has errors to fix but says it was able to repair them too.
    Right now... it all appears to be working fine, though it says I have "custom access" in the Get Info window for my HD.
    However, I can't shake the nagging feeling that I've just used a flamethrower to clean up the living room.
    For instance, I look now on my own Macbook and see that "wheel" and "everyone" in the Get Info window and see it's Read Only. And yet, I have no permissions problems right now at all.
    (Update: I tried setting hers back to match mine in the same way (via the Get Info window, apply, disk utility, reboot, etc.) and the permissions problems all came back. So I went and made it Read & Write for everyone again. However, this just can't be right.)
    Can anybody tell me (in easy terms, please) what I can do to get it back to what it should be?
    I've seen notes on a program on xnation.com that "fixes ACLs"... and a few posts with Terminal commands... but I'm hesitant to borrow somebody else's solution, just in case it's not so good of a fit or if I don't understand it.
    What do you think?
    P.S. I  promise to rate good solutions offered to up your point totals.

    Something like this?
    System - Read & Write
    Wheel - Read Only
    everyone - Read Only
    Yes.
    ...software from xnation.com that is designed to reset those ACLs?
    I've never heard of it. You already know how to reset user permissions.
    if the system seems to be working fine, does that mean something is still broken/in danger of corrupting or something?
    You set wide-open permissions on all files. That's insecure, and some things won't work at all, maybe not anything you use.

  • "You have custom access"??? (permissions issue)

    Apologies if this has been covered before but I have quite a few folders that say "You have custom access" in the Sharing & Permissions section of the "Get Info" Finder window, not "You can read and write" as I would expect. Some of these really do seem to have unusual permissions, such as an "(unknown user)" entry, but others appear to have identical permissions to those for which Get Info says "You can read and write."
    I suspect this is somehow related to some (but not all) of these folders originally being created in OS 10.1 (!!) & now in my Leopard file system courtesy of various Migration Assistant & Setup Assistant transfers spanning several Macs & hard drives since I played around with that ancient OS version.
    Can anyone help me understand why this is so & more importantly how I can set these folder's permissions to the default, non-custom ones, which I assume will say "You can read and write" in the Get Info window?

    Francine Schwieder wrote:
    This whole issue is very convoluted and confusing, with new bewilderments (at least bewildering to me) turning up every day.
    I agree completely! I keep hoping Apple will post some kbase articles or update Mac Help to explain more about the defaults & options, but so far the only things I have found are Mac OS X 10.5 Help: Sharing files on your network, Mac OS X 10.5 Help: Setting file-sharing options, & similar "lightweight" instructions which really don't say much more than I can discover by just poking around on my own.
    For myself, I simply gave up, cloned my Leopard install to the disk I had been using for Time Machine, and did an erase and install, then let the migration assistant that pops up as the install finishes copy what it wished how it wished from the cloned system. At least things now look consistent: no more "unknown" files, no ACLs where none should be in my home folder, all new files are saved to the apparent new standard: user francine uid 501, group staff gid 20 (of course yesterday I found out even that isn't as straight-forward as one might think, I'll spare your the details).
    Ironically perhaps, my Leopard install was done the same way (using Setup Assistant to copy everything possible from my Tiger clone, which is what I think you mean you used here) & it *did not* cause Spotlight to start indexing the Leopard volume or resolve any of the "unknown user" issues for me. This may have been because I messed around with permissions settings on some of my document files on the Tiger volume long ago when it had an additional standard account (since deleted), so that account's UID or GID could have been attached to a few files.
    Just to muddy the waters even more, I've discovered a file (/Library/Preferences/com.apple.preferences.accounts.plist) that contains an array of four essential properties of every account I've ever deleted since installing Tiger: the "UniqueID" (which appears to be the UID), the short & long user names, & the date deleted. This file apparently is created anew each time an account is deleted (except curiously its creation date is exactly one day later than that of the last account deletion) but it clearly includes the info from previous versions.
    Annoyingly, the Sharing Only user that I added that (I think) caused Spotlight to start indexing did not have the UID (& thus GID) of the deleted account I mentioned above, so the theory that the old account had something to do with it now looks dubious at best.
    The more I study this, the less it makes any sense.

  • All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. Permissions are set to 'Custom' in the get info window and I can't change them.

    All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. I have 3 user accounts set up and I cannot access any of them.   Permissions are set to 'Custom' in the get info window and I can't change them. Originally I had Snow Leopard installed on one hard drive and 10.5.8 installed on another.   I started to have some problems accessing data between them and so I tried changing the permissions on ONE hard drive partition.   The next thing I know, all my drives are locked (except the ones with the systems on them), the small lock appeared in the lower left corner of the drive icons and I don't have permissions to access any of them.   In the get info window, permissions are set to 'Custom' and I can't change them.

    There is suddenly a lock icon on my external backup drive!
    Custom Permissions

  • Confirmed: Parallels install (5160) messes up Access / Permissions

    I have been going back and forth for 5 different installs of Leopard trying to sort out what has been going wrong. Thank goodness for the 10.4.10 bootable backup! (via CCC)
    I have had the problem where root folders on my local HD have had the "You have custom access" rather than "You can read and write". The folders are personal ones. In Terminal they do not show odd behavior such as a ACL 0 condition that some have reported on. I am admin (only account on the machine).
    I tried running disk utility repair permissions (took 45 minutes, no success in these areas).
    I tried creating a new admin account and using it. No success.
    I tried batchMod to manually re-assign permissions. No luck.
    So, by trial and error, I reinstalled 4 times trying to find out what was going on. First I simply cloned over my "good 10.5 install" from my other machine. Then, after installing Parallels (build 5160) as well as other things, I had the permissions problems. So, I backed up a step and simply did a local clean install. This looked good, but then again after Parallels, it was screwed up. Finally, I did a clean install again, and am now waiting to hear back from Parallels before continuing. I will make sure and clone my current config before I try again.
    It hasn't been fun. I have read a lot on other ACL / permissions issues, and am wondering if anyone else with some of these random problems have Parallels? The problems caused may not be very apparent, except that you can't modify files / folders on the root directory of the HD without it telling you you don't have access (when trying to rename a folder) or having you authenticate (if you try to delete or add a file or folder).

    I do understand and appreciate that this is not Leopard's fault. I only do clean erase and installs so that I have an opportunity to clean things up, so obviously no prior - installed 3rd party app is causing me any conflicts because the hard disk was clean.
    At the same time I am stuck without being able to dynamically get into XP (I don't like being there, but the linguistic tools I need to use are only for XP) without rebooting. I am left unwilling to install Parallels on my current Leopard build due to the corruption I had identified with the prior 4 builds. Just wondering if anyone could confirm that "Yes, I have that problem, too", or "No, I don't have any permissions problems like this after installing Parallels."
    Thanks,
    iveand

  • "Custom Access" permissions are locking me out of my own computer!

    "Custom Access" permissions are locking me out of my own computer!
    I have a Mac Book Pro which I can no longer access, due, I believe, to a problem with disk and file permissions. When I attempt to open up the volume, which I am able to put in FireWire target mode and mount on the desktop of a nearby iMac G5, I get an error message saying: "The folder 'MacBook Pro' could not be opened because you do not have sufficient access privileges."
    When I select the 'MacBook Pro' volume and run the Get Info command, I learn that the system, admin, and everyone else groups now have "custom access." I suppose that this newly acquired "custom access" is the reason that the volume icon now appears on the desktop with a lock at its lower left corner! Unfortunately, that lock is keeping me out, so I need help in finding the key back in!
    How all this came about overnight is a mystery wrapped in a enigma similar to my getting pneumonia last summer. Coming down with both diseases would require telling long stories that would only have as their common objective the desire to be cured. I might have gotten the pneumonia at my college reunion; my laptop computer might have caught a cold last night when I ran TechTool Pro and optimized my volume prior to installing its eDrive today. Or, my laptop computer may have choked when I tried to add Disk Warrior to the TechTool Pro eDrive and inadvertently issued some command that resulted in my normal permission settings getting changed and rendering everything on the computer completely inaccessible to me. Who knows for sure? Right now, the cause doesn't matter: finding the solution does.
    I used TechTool Pro to run a series of tests before (and after) I got locked out of my own computer and the volume passed all the tests for volume integrity and file integrity. TechTool also rebuilt the directory, defragged all the files, and optimized the hard drive into one, large, well-organized segment of files --that I unfortunately can no longer access!
    *What I think I need now are some very explicit, error-free, Terminal (UNIX) instructions telling me how to change the permissions on an external FireWire volume called "MacBook Pro" containing Leopard Mac OS X 10.5.7 from its current custom access privileges back to my settings before my poor computer caught this disabling cold.*
    I do have a SuperDuper clone of this MacBook Pro computer on an external FireWire, which I could probably use to relieve me of my pain. But, if at all possible, I would like to call upon that option only as a last resort for two reasons:
    (1) I am not entirely comfortable that the clone is completely reliable at this moment. My last cloning operation last night (before this corrupted permissions problem occurred) did not complete itself, leaving the cloned volume in an unknown, or unstable, state. (2) I would like to use this problem as an opportunity to grow and learn more about the Terminal and UNIX commands.
    I have read the relevant sections in David Pogue's missing manual on Mac OS X Leopard, so I am familiar (in theory) with the concepts he explained regarding ownership, file permissions, the root, Terminal, the CHMOD command, and the SUDO command. It's just that, considering the awesome power of the SuperUser Do command, I'm not all that confident yet that I could write the command(s) that could affect the state of my entire computer hard drive. So, *I'm asking for guidance from a UNIX guru to guide my hand this first time out.*
    I know about the idea of safe booting up as a single user, but since I do have my laptop computer mounted on the desktop of my iMac as a Firewire volume, I would prefer to use Terminal on the iMac to fix the permissions on that mounted volume, called "MacBook Pro".
    *Experts only, please*. Theories about what might have caused this problem would be nice, but what I really need is explicit command line code to cure this one. Since other people may occasionally encounter this problem of being locked out of their own computer, it would be fine with me if some knowledgeable guru wants to use this as a springboard to write a detailed tutorial on the topic along the way to the solution. Thanks.
    bowlerboy_jmb

    {I read that article you sent me to, Baltwo, but it does not seem appropriate, because the disk is not invisible. It's locked! I also went through all the discussions on flag changing you directed to me to look up, and I tried to apply something from there to my situation. But that's not working for me yet either. The topics there seem to be close enough to be relevant to my case, but none are exactly on the mark, and so far they deliver no cigar. Maybe I missed the one thread you had in mind from among the twenty I looked through: I can't be sure. You point it out, if you have one in mind. Anyway, in the absence of anyone providing me with specific Unix code or suggestions about my particular situation, I plunged ahead on my own, and I attempted to write some Unix code that might fix my problem. So far, I've had no success. This posting intersperses my comments along with the lines of Unix code which were displayed on my MacBook Pro during my recent attempts to tinker under the hood. My remarks are contained inside of curly brackets like { and } while the results of my Unix experimenting in Single User Mode on the laptop are presented without curly brackets. These were initially notes to myself, so I'm creating a post around my Unix dabbling to see if it triggers any feedback, corrections, and guidance for moving ahead. I'm stuck right now.}
    date
    Fri Jun 19 17:52:25 EDT 2009
    :/ root# sudo chflags nouchg /
    sudo: can't open /private/etc/sudoers: Permission denied
    :/ root# sendmail: warning: valid_hostname: empty hostname
    sendmail: fatal: unable to use my own hostname
    :/ root# ls -l
    {The screen filled up with rows of file names and their permissions, like...}
    drwxrwxr-x+ 43 root admin 1462 Jun 16 04:36 Applications
    :/ root# exit
    {Nothing happens for quite a while, then...}
    jettisoning kernel linker.
    {...and then several lines of replies fill up the screen, ending in that same loop regarding no such file or directory found, in regards to mDNSResponder. I had tried the {chmod 775 > solution recommended by a user at a web site I Googled to deal with the mDNSResponder problem he had. The chmod 775 / command worked for him, he reported, but it does not succeed for me. The mDNSResponderline continues to repeat itself ad infinitum, so I must force the Mac to turn off by holding down the power button for several seconds. Upon restart in Single User mode, I observe that, as before, "Root device is mounted read-only," so this time I try to amend permissions at the root level with...}
    :/ root# sudo chmod 755 /
    {If I understand what I've just learned about Unix, this tells the Mac to give me permission to do anything, but to give all others permission only to read and execute. Unfortunately, the command fails. The computer again responded with the same lines that it gave me when I had issued the command regarding no user flags, namely:}
    sudo: can't open /private/etc/sudoers: Permission denied
    :/ root# sendmail: warning: valid_hostname: empty hostname
    sendmail: fatal: unable to use my own hostname
    {So, to summarize, I have a MacBook Pro which I am apparently locked out of and cannot change. The hard disk is not invisible: it will appear as an external drive when placed in Target Mode and connected via a Firewire cable to an iMac. I tried to use Terminal on that iMac to change permissions on the MacBook Pro, but permission was denied.
    {So, I have tried to make changes on the MacBook Pro directly. I learned that it will neither start-up under normal circumstances nor via Safe Boot mode. It will, however, start-up under Single User mode. Based on my bleary-eyed crash course in Unix throughout all of last night and early this morning, I did gain some additional understanding about UNIX from some [free online books|http://www.scribd.com/doc/12747795/Made-Easy-Unix-for-Beginners] and articles, especially from a thorough and lucidly written article at Indiana University called [In Unix, how do I change the permissions for a file?|http://kb.iu.edu/data/data/abdb.html]
    {Also, I followed the links to the Apple discussions on user flags, and I cherry picked the most appropriate solutions suggested there to see if they will apply to my situation. However, none quite fit. None have thus far succeeded. I think I now know how to formulate the syntax of Unix commands in regards to modifying permissions, and I'm willing to plow ahead and try things out. But I'm only a rank beginner in this Unix realm, so maybe I'm doing something wrong in that department.
    {It just boggles my mind that someone can inadvertently be locked out of their computer without a way back in, so all I'm asking for is some trouble-shooting guidance to find the key back in. Anyone got it? Is this a problem that can be cured by writing some Unix commands to the system? Or, does the solution lie elsewhere?}
    bowlerboy_jmb

  • I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't  be opened by some users.  How do I fix this?

    We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac.  These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's.  When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access.  The files that work properly don't have that configuration.  I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it.  We're all using PC's and they get the Error:  Access Denied-Contact your administrator--or something similar.  I've seen on the web similar issues and it may have something to do with ACL permissions.  I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files.  Thanks for a solution!!

    Oh, on the losing Internet, try this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    PS. Your English is quite good & completely understandable.

  • Custom Access File Permissions

    I"m using Snow Leopard Server 10.6.8, and we've been having some permission problems.  If you go into a folder that has read-write access and open a file and make a change in the file, the system requires you to save it as a new file rather than just letting you save it and replace the existing files.  I've found that the files that have this issue are setup with "Custom Access" showing in their permissions section under "Get Info".  I don't know why or how it creates Custom Access but I'd like to be able to change it or make the server stop doing it.  Any solutions?  Thanks.

    I've just upgraded to Snow Leopard (don't laugh...I know I'm a dinosaur..) and sometimes I need to over-write a file 10 or more times when I'm doing corrections.  It saves as a new file and adds another '.' at the end which is extremely frustrating! 
    Any help on how to go back to the old 'do you want to replace this file' box would be gratefully received!
    Thanks...
    Take care
    Marianne

  • Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

    Have uploaded and installed CC 2014. Several apps give this error when I try to start them:  "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
    -or-
    The icon in the dock bounces once, and nothing happens.

    Windows or Mac, and exactly which operating system version?

  • Oracle Instalation error (You do not have sufficient permissions to access)

    Hi
    my enviroment is SAP ECC6/Oracle 10g/ SUN Solaris 10 SPARC
    I'm installing SAP but run into the error below. I don't understand why the inventory file is pointing to /home/prodora which does not exist. this directory is owned by root and ownership cannot be changed to user oraq11.
    Is it possible to change the location of the inventory ?
    kindly assist
    regards
    simbatech:oraq11> ./RUNINSTALLER
    oracle_stage is not set (OK)
    oracle_base is not set (OK)
    oracle_home is not set (OK)
    oracle_sid is not set (OK)
    oracle_home_name is not set (OK)
    oracle_inst_group is not set (OK)
    from_location is not set (OK)
    tmp_netca_file is not set (OK)
    tmp_dbca_file is not set (OK)
    Working in /oracle/stage/102_64/database/SAP ...
    Oracle SID:            Q11
    Oracle Home:           /oracle/Q11/102_64
    Oracle Home Name:      Q11_102_64
    Oracle Install Group:  dba
    Installing from:       /oracle/stage/102_64/database/stage/products.xml
    oracle_stage="/oracle/stage/102_64"
    oracle_base="/oracle/Q11"
    oracle_version="102_64"
    oracle_home="/oracle/Q11/102_64"
    oracle_sid="Q11"
    oracle_home_name="Q11_102_64"
    oracle_inst_group="dba"
    from_location="/oracle/stage/102_64/database/stage/products.xml"
    tmp_netca_file="/tmp/.orainst_netca.15383"
    tmp_dbca_file="/tmp/.orainst_dbca.15383"
    ORACLE_BASE="/oracle/Q11"
    ORACLE_HOME="/oracle/Q11/102_64"
    ================================
    Preparing response files. Please wait:
    ======================================
    Working on /oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP
    /oracle/stage/102_64/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.15383: Done
    You do not have sufficient permissions to access the inventory +'/home/prodora/oraInventory'.+ Installation cannot continue. Make sure that you have read/write permissions to the inventory directory and restart the installer.: No such file or directory
    simbatech:oraq11>

    Hi,
    Yes, Solution describe in 350251 - Creating a New or 2nd Oracle SID with runInstaller
    "THE SOLUTION"
    The good news is the solution is very simple and takes a few seconds
    First cd /var/opt/oracle
    You will find a file called oraInst.loc # cat oraInst.loc
    inventory_loc=/oracle/PR1/oraInventory
    inst_group=dba
    Use vi or emacs to edit the file and change the inventory_loc to the directory of the oracle instance you are currently installing. ie inventory_loc=/oracle/PR2/oraInventory
    Restart your oracle installer  eg. su - orapr2
    cd /oracle/stage/816_64
    setenv DISPLAY localhost:0.0
    ./runInstaller
    Regards;

  • Using PowerShell to set Custom Access Rights on a Calendar Does not set Free/Busy Permissions

    We recently discovered an issue where, if you use Exchange Management Shell to configure custom access rights, the Free/Busy permissions do not get set at all (they remain as "None"):
    $temp = [Microsoft.Exchange.Management.StoreTasks.MailboxFolderAccessRight[]]("ReadItems","EditOwnedItems","DeleteOwnedItems","EditAllItems","DeleteAllItems","FolderVisible")
    Add-MailboxFolderPermission -Identity "conf-company-test:\calendar" -User "Company Calendar Management" -AccessRights $temp
    Add-MailboxFolderPermission -Identity "conf-company-test:\calendar" -User "mpinkston" -AccessRights Editor
    If you use a pre-defined "role" such as Editor given to mpinkston6 in the above example it sets the Free/Busy permission to Full Details. It would appear that using Add-MailboxFolderPermission or Set-MailboxFolderPermission is generic for folder
    objects, and doesn't explicitly set the Free/Busy permissions. In the case of the pre-defined roles either the command is doing something special/different, or the permission checks later accept pre-defined roles for determining Free/Busy permissions. No idea
    which is going on. If Free/Busy permissions can be fixed through PowerShell by some other mechanism/command, that would be great. If not, how do we go about requesting a fix/feature change in Exchange?
    http://technet.microsoft.com/en-us/library/dd298062%28v=exchg.150%29.aspx
    (Please expand Parameters and read AccessRights to get a better understanding for what I'm describing.)

    Did you try adding AvailabilityOnly or LimitedDetails in your $temp variable for Calendar folder? These would set it to "Free/Busy time, subject, location" or "Free/Busy time" respectively....
    Add-MailboxFolderPermission - http://technet.microsoft.com/en-us/library/dd298062(v=exchg.150).aspx
    The following roles apply specifically to calendar folders:
    AvailabilityOnly   View only availability data
    LimitedDetails   View availability data with subject and location
    Amit Tank | Exchange - MVP | Blog:
    exchangeshare.wordpress.com 

Maybe you are looking for