Leopard Not Seeing Correct Permissions on Files on Leopard Server

File on OS X 10.4 server has the following permissions:
owner abc read & write
group abc read & write
everyone read only
If I connect to the server via AFP from a client running OS X 10.4 with user xyz that's in group abc, that client shows these permissions correctly (via Finder get info).
If I connect to the server via AFP from a client running OS X 10.5 with user xyz that's in group abc, the client shows the following permissions (via Finder get info):
You have custom access
(unknown) read & Write
staff read only
everyone read only
If I disable ACLs on the OS X 10.5 client (fsaclctl -d), it shows the same permissions as the OS X 10.4 client.
I verified that the file on the server does not have an ACLs attached.
Any suggestions as to why this is happening? Thanks!

Hi - for anyone to help you, you'll need to tell us:
• what version of system software is your server running?
• You say you have to change permissions - is this when you try to upload? Is this when you try to open the file on the laptop - or when you try to open the file on the server itself?
Message was edited by: Nico710

Similar Messages

  • FCE not seeing new Live Type files correctly... (Leopard issue?)

    There appears to be a problem in LiveType and FCE as of Leopard.
    LiveType files created BEFORE Leopard was installed import fine, but files created AFTER Leopard was installed will not import and return an error:
    File Error. 1 File Recognized. 0 Access Denied. 1 file unknown.
    Live Type files that are rendered as movies are importable and that is the workaround. But of course they cannot be edited again unless the Live Type file is reopened and re-rendered.
    IOW, no import of a Live Type file directly into FCE.
    Pro apps download doesn't appear to apply to FCE and you need a FCP serial # to access it anyway.
    All suggestions appreciated.

    Never mind. I figured it out.

  • Leopard not seeing Windows shares on a home network - one solution

    I have a small home network with a MacBook Pro, MacMini and a PC connected by Ethernet and a MacBook and a Powerbook connecting remotely. Recently upgraded to Leopard and initially could see the PC in the sharing tab of the sidebar of the Finder window. This then disappeared and was not fixed by the 10.5.1 update.
    I spent hours messing around and now seem to have fixed the problem to the extent that the PC now shows up in the sharing tab spontaneously and this survives a restart.
    First I looked at the workgroup issue in the WINS tab of the advanced settings in the Network preference pane. This wouldn’t ‘stick’ and the solution (posted elsewhere) is to duplicate the location setting, delete the old one and then use the new duplicated one, then you can enter a workgroup name and it will stick. The Mac doesn’t seem to detect a workgroup and I only found what the workgroup name was later. There was a greyed out NetBios name for my mac however. I also made sure that SMB sharing was enabled in the options dialog box in the sharing pane, (if you disable AFP sharing and close the window with SMB enabled the message in the sharing pane then says ‘Windows sharing enabled’ if both AFP and SMB are enabled then Windows sharing is not mentioned)
    I intermittently tried to connect to server on smb://192.168 etc. and I kept getting a connection failed dialog box.
    Still getting nowhere, so went to the PC to have a look at that. Found the correct workgroup name by searching the help for “computer, name” and this directed me to find the computer and workgroup names. I went back to the Mac and put in the workgroup name but still no joy. Went back to the PC and looked at ‘my network places’ and sure enough the public folder on my mac appeared and if I put a file into it I could open it on the PC.
    I then looked at the firewall settings on the PC (I’m using BitDefender 2008 total security) and set the Mac to be a trusted computer on the network. Went back to the mac and tried connecting via the connect to server dialog box and this worked!!! I was asked for my windows password and having put this in the shared folders on the PC appeared. The PC appeared in the sidebar with a generic icon and the IP address (192.168.etc) next to it instead of the computer name. However, after I ejected the PC to see if I could connect again, it suddenly popped up again spontaneously in the sidebar with the usual PC-type computer name, i.e. a name followed by a random seeming alphanumeric string. If I select the PC in the sidebar and then click on the ‘connect as…’ button in the Finder window the shared folders appear.
    As I say this ability to see the PC has now survived a restart so fingers crossed. I can't say which bits of the above were the important ones but it did seem to work.
    Maybe this might help others
    Cheers
    Iain

    I recently installed Leopard and just today wanted to connect to one of my Windows machines. After a Google search and some forum browsing I did the following:
    - System Prefs > Network > Ethernet > Advanced... > WINS > Workgroup
    - entered my Workgroup name (WORKGROUP)
    - clicked "Ok" then "Apply"
    - Restarted
    - Apple Key + "K" smb://192.168.1.1
    - Authentication box appeared; I typed in my creditials
    - Then I noticed that the finder sidebar had populated the "shared" section with my Workgroup computers (all two of them). Not sure if it was populated after the restart but sure it wasn't there before.
    - Just restarted and the "Shared" section is still populated with the Windows workgroup machines.
    I'm very glad this is working as I have the "no WiFi" bug.

  • Odd Error with Fireworks not seeing some folders or files

    I have just updated to OS X 10.5.1 running on a Mac Pro 2x
    2.66Ghz dual-core Intel Xeon with 5gb of memory.
    I have been using CS3 for some time now on OS X 10.4 with no
    problems. After the upgrade I now can't see some folders and files
    via Fireworks. Even files I have just worked on in Fireworks and
    saved to a folder. I then try and re-open them by looking in the
    folder I just saved the file to but it's not there. If I look with
    Finder or any other Adobe program I can see it without any
    problems.
    Has anyone come across this problem before?

    Tom,
    It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
    - You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
    If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Edge does not see the edge actions file.

    Working with Edge version 1.5.0 and Visual Studio 10.  Just about finished with a project and now all of my code has disappeared from Edge, I can't see any of my triggers on the timeline or events on the buttons.  I can still open the html in a browser and everything still works but I can't do any more edits inside of Edge because I can't see the code in there.
    The edge actions file has all the code, but Edge does not see any of it inside Edge.   I tried pasting the full code back into Edge but it would not save it.  How can I get edge to see the code again?

    Elaine,
    Thanks for getting back, however, I cannot ZIP up the project since it is proprietary.  It is fairly large with multiple levels of symbols.  I can open the Edge Actions file outside of Edge and see all the code just fine.  When I open the code in Edge this is all I get:
    * Adobe Edge Animate Composition Actions
    * Edit this file with caution, being careful to preserve
    * function signatures and comments starting with 'Edge' to maintain the
    * ability to interact with these actions from within Adobe Edge Animate
    (function($, Edge, compId){
    var Composition = Edge.Composition, Symbol = Edge.Symbol; // aliases for commonly used Edge classes
       //Edge symbol: 'stage'
       (function(symbolName) {
       })("stage");
       //Edge symbol end:'stage'
    })(jQuery, AdobeEdge, "EDGE-157779901");
    I cannot paste over this and save.  Not sure what I need to do. Thanks for your help.
    -Stephen

  • Customers can not see linked creative cloud files?

    Hi,
    I have been saving files to my Creative Cloud folder and then emailing the link to my customers, I did try the email function, but that just ends up in their junk mail.
    However, my customers can not see the linked files? I asked one of them to send a screen shot. This is below;
    Any ideas?

    Please email me at [email protected] with one of the links you are trying to share. I will investigate.

  • Bapi_document_create2 does not work correctly with attached file.

    Hi all.
    I hava a problem with bapi. I programmed below.
            ls_docdata-documenttype = 'BBS'.
            ls_docdata-description  = 'JJW test'.
            ls_file-documenttype = 'BBS'.
            ls_file-ORIGINALTYPE = 1.
            ls_file-storagecategory = 'ZSTW_KPRO'.
            ls_file-wsapplication = 'TXT'.
            ls_file-docfile = entity_filename.
            append ls_file to lt_files.
            CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
              EXPORTING
                documentdata       = ls_docdata
                PF_FTP_DEST = 'SAPFTP'
                PF_HTTP_DEST = 'SAPHTTP'
              IMPORTING
                documenttype               =      lv_documenttype
                documentnumber           =     lv_documentnumber
                documentpart                =     lv_documentpart
                documentversion           =     lv_documentversion
                return                           =     ls_return
              tables
                documentfiles     = lt_files.
            call function 'BAPI_TRANSACTION_COMMIT'.
    If I don't attach the file, DIR is created but if attach some files, it does not work. What should I do??
    regards.

    Hi,
    You can use the below to attach the file from BSP to SAP. But it doesnt use the BAPI - 'BAPI_DOCUMENT_CREATE2'. It works perfectly for me. Let me know if you have any questions.
    Note: This code put the file into SAP Directory "/userapps/master_data/" as well as it upload the file into Transaction WTY since i am using Business object:BUS2222. You may need to modify the Business object if you ahve the one, otherwise you can just put it into SAP DIR.
    FUNCTION ZATTACH_CREATE.
    *"*"Update function module:
    *"*"Local interface:
    *"  IMPORTING
    *"     VALUE(FILE) TYPE  SAPB-SAPFILES
    *"     VALUE(STR_FILE_CONTENT) TYPE  XSTRING
    *"     VALUE(OBJECT_KEY) TYPE  BAPIBDS01-OBJKEY
      DATA: LOGICAL_SYSTEM TYPE BAPIBDS01-LOG_SYSTEM,
            CLASSNAME TYPE  BAPIBDS01-CLASSNAME,
            CLASSTYPE TYPE  BAPIBDS01-CLASSTYPE.
      DATA:  IT_FILES TYPE TABLE OF  BAPIFILES,
            IT_SIGNATURE TYPE TABLE OF  BAPISIGNAT,
       FILES TYPE  BAPIFILES,
      SIGNATURE TYPE   BAPISIGNAT.
      DATA: I_TOADD TYPE TOADD,
            FILENAME_ALL TYPE SAPB-SAPFILES,
            FILE_PATH TYPE SAPB-SAPFILES,
            FILE_PATH_MEMORY(250) TYPE C,  " path für SAP memory
            FILE_PATH_LENGTH TYPE I,       " length of the file_path
           FILE_CONTENT_LENGTH TYPE I,       " length of the file_CONTENT
           FILE_NAME TYPE SAPB-SAPFILES,
            FILE_EXTENSION TYPE TOADD-DOC_TYPE.     " file-extension.
      DATA: I_FILE_CONTENT TYPE TABLE OF BAPICONTEN.
      DATA: WA_FILE_CONTENT TYPE  BAPICONTEN,
       STRING_CONTENT TYPE STRING,
       STRING_CONTENT1 TYPE STRING.
      DATA:
       I_FILES TYPE TABLE OF BAPIFILES ,
            I_SIGNATURE TYPE TABLE OF BAPISIGNAT ,
            I_COMPONENTS TYPE TABLE OF BAPICOMPON ,
           COMPONENTS TYPE BAPICOMPON ,
            I_PROPERTIES TYPE TABLE OF SDOKPROPTY ,
            I_PROPERTIES2 TYPE TABLE OF BAPIPROPER ,
            I_PROPERTIES_DEL TYPE TABLE OF BAPIDPROPT ,
           MIMETYPE TYPE TOADD-MIMETYPE,
      COMPID TYPE BAPICOMPON-COMP_ID,  " compid for popup
            COMPID_FLAG(1) TYPE C,           " compid can't be changed
            MODIFY_FLAG(1) TYPE C,           " document is modified
            ATTRI_FLAG(1) TYPE C,            " attri can't be changed
            TITLE_FLAG(1) TYPE C,            " titel of the popup
            CANCEL_FLAG(1) TYPE C,           " cancel button Yes/No
            BUTTON_TEXT(10) TYPE C,
            INFO_TEXT(100) TYPE C,
      VERSION_NR TYPE BDN_CON-DOC_VER_NO,     " version_nr for popup
            VERSION_LANGU2 TYPE T002T-SPTXT, " language field in POPUP
            VERSION_LANGU TYPE BDN_CON-LANGU," SPRAS language field
            TITLE_TEXT(100) TYPE C,          " title of the popup
            DESCRIPTION TYPE BDN_CON-DESCRIPT.      " descr. for popup
    *FILENAME_ALL = fileUpload_event->file_name.
    * Transfering into SAP File server.
      FILE_CONTENT_LENGTH = XSTRLEN( STR_FILE_CONTENT ).
      FILENAME_ALL = FILE .
      STRING_CONTENT = STR_FILE_CONTENT.
      DATA: OUT_LINES TYPE TABLE OF XSTRING.
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
          BUFFER                = STR_FILE_CONTENT
    *   APPEND_TO_TABLE       = ' '
    * IMPORTING
    *   OUTPUT_LENGTH         =
        TABLES
          BINARY_TAB            = I_FILE_CONTENT.
      DELETE DATASET '/userapps/master_data/claim1.txt'.
      OPEN DATASET '/userapps/master_data/claim1.txt' FOR APPENDING
        IN TEXT MODE ENCODING DEFAULT.
    *  LOOP AT I_FILE_CONTENT INTO WA_FILE_CONTENT.
    *    TRANSFER STR_FILE_CONTENT TO '/userapps/master_data/claim1.txt'.
      TRANSFER STRING_CONTENT TO '/userapps/master_data/claim1.txt'.
    *  ENDLOOP.
      CLOSE DATASET '/userapps/master_data/claim1.txt'.
      OPEN DATASET '/userapps/master_data/claim1.txt' FOR INPUT
           IN TEXT MODE ENCODING DEFAULT.
      READ DATASET '/userapps/master_data/claim1.txt'  into STRING_CONTENT1.
    * -- split filename                                                 -- *
        DATA: LENGTH TYPE I.
      DATA: PATH2(1200).  " LIKE sapb-sapfiles.
      DATA: L_FILE(1200),
            L_DIR(1200),
            L_DELIMITER        TYPE C,
            L_OFFSET           TYPE I,
            L_BYTES            TYPE I,
            L_DELIMITER_OFFSET TYPE I,
            L_DELIMITER_BYTES  TYPE I,
            L_CHAR             TYPE C,
            L_PREVIOUS_CHAR    TYPE C,
            L_LAST_CHAR        TYPE C.
      PATH2 = FILENAME_ALL.
      LENGTH = STRLEN( PATH2 ).
      L_OFFSET = 0.
      WHILE L_OFFSET < LENGTH.
        L_LAST_CHAR = L_CHAR. "remember last character
        L_BYTES = CHARLEN( PATH2+L_OFFSET ).
        L_CHAR = PATH2+L_OFFSET(L_BYTES). "get current character
        IF L_CHAR = '/' OR L_CHAR = '' OR L_CHAR = ':'.
          IF L_DELIMITER IS INITIAL OR L_DELIMITER = ':'.
            "Typically we deal with absolute paths, so the first
            "delimiter is best. This allows for UNIX paths with
            "'' in the directory or file name
            L_DELIMITER = L_CHAR.
          ENDIF.
          IF L_CHAR = L_DELIMITER.
            L_DELIMITER_OFFSET = L_OFFSET.
            L_DELIMITER_BYTES = L_BYTES.
            "remember character in front of delimiter:
            L_PREVIOUS_CHAR = L_LAST_CHAR.
          ENDIF.
        ENDIF.
        L_OFFSET = L_OFFSET + L_BYTES.
      ENDWHILE.
      IF NOT L_DELIMITER IS INITIAL.
        L_OFFSET = L_DELIMITER_OFFSET + L_DELIMITER_BYTES.
        L_FILE = PATH2+L_OFFSET.
        IF L_PREVIOUS_CHAR = ':' OR L_DELIMITER = ':'.
          "path ends with or after drive identifer, include the delimiter
          L_DIR = PATH2(L_OFFSET).
        ELSEIF NOT L_DELIMITER_OFFSET IS INITIAL.
          "do not include a trailing delimiter for compatibility reasons
          L_DIR = PATH2(L_DELIMITER_OFFSET).
        ELSE.
          CLEAR L_DIR.
        ENDIF.
      ELSE.
        L_DIR = SPACE.
        L_FILE = PATH2.
      ENDIF.
      FILE_PATH = L_DIR.
      FILE_NAME = L_FILE.
    * -- set new file_path to SAP memory                                -- *
      FILE_PATH_LENGTH = STRLEN( FILE_PATH ).
      IF FILE_PATH <> SPACE AND FILE_PATH_LENGTH < 250.
        FILE_PATH_MEMORY = FILE_PATH.
        SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
      ELSE.
        FILE_PATH_MEMORY = SPACE.
        SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
      ENDIF.
    * -- data declaration ------------------------------------------------ *
      DATA:
            SINGLE_C TYPE C.
      CLEAR: SINGLE_C.
      LENGTH = STRLEN( FILE_NAME ).
      IF LENGTH > 0.
        WHILE LENGTH > 0.
          SINGLE_C = FILE_NAME+LENGTH(1).
          IF SINGLE_C CO '.'.
            LENGTH = LENGTH + 1.
            EXIT.
          ELSE.
            LENGTH = LENGTH - 1.
          ENDIF.
        ENDWHILE.
        IF LENGTH > 0.
          FILE_EXTENSION = FILE_NAME+LENGTH.
        ELSE.
          FILE_EXTENSION = SPACE.
        ENDIF.
      ELSE.
        FILE_EXTENSION = SPACE.
      ENDIF.
      IF FILE_EXTENSION <> SPACE.
        SET LOCALE LANGUAGE SY-LANGU.
        TRANSLATE FILE_EXTENSION TO UPPER CASE.              "#EC TRANSLANG
        SET LOCALE LANGUAGE SPACE.
      ENDIF.
    * TR001++
      DATA: I_TOADV TYPE TABLE OF TOADV.
      DATA: WA_TOADV TYPE TOADV.
      DATA: OBJECT TYPE SAEOBJART.
      SELECT * FROM TOADV INTO CORRESPONDING FIELDS OF TABLE
              I_TOADV WHERE STANDARD = 'X'.
      DELETE I_TOADV WHERE AR_OBJECT CS 'BDS' OR AR_OBJECT CS 'ZSEST'.
      READ TABLE I_TOADV INTO WA_TOADV WITH KEY DOC_TYPE = FILE_EXTENSION.
    * -- get name and description for the document                      -- *
      CLEAR: COMPID,
             DESCRIPTION,
             VERSION_NR,
             MODIFY_FLAG,
             COMPID_FLAG,
             ATTRI_FLAG,
             TITLE_FLAG.
      COMPID_FLAG    = ' '.              " -> compid can't be changed
      MODIFY_FLAG    = 'S'.              " -> popup in save modus
      ATTRI_FLAG     = 'X'.              " -> attri's can be changed
      COMPID         = FILE_NAME.
      VERSION_NR     = '00000001'.
      VERSION_LANGU2 = SY-LANGU.
      TITLE_FLAG     = '1'.              " -> BDN
    * -- get the mimetype of the docuclass                              -- *
    *PERFORM MIMETYPE_GET(OAALL) USING FILE_EXTENSION
    *                            CHANGING I_TOADD.
      DATA: I_DOCUMENTCLASS TYPE TOADD-DOC_TYPE.
      MOVE FILE_EXTENSION TO I_DOCUMENTCLASS.
      SET LOCALE LANGUAGE SY-LANGU.
      TRANSLATE I_DOCUMENTCLASS TO UPPER CASE.               "#EC TRANSLANG
      SET LOCALE LANGUAGE SPACE.
      SELECT SINGLE * FROM TOADD INTO I_TOADD WHERE
                                 DOC_TYPE EQ I_DOCUMENTCLASS.
      IF SY-SUBRC NE 0.                    " nothing found -> default!
        I_TOADD-DOC_TYPE = I_DOCUMENTCLASS.
        I_TOADD-MIMETYPE = 'application/x-docType'.             "#EC NOTEXT
      ENDIF.
      MOVE I_TOADD-MIMETYPE TO MIMETYPE.
    * -- fill file and signature structure                              -- *
      CLEAR: I_FILES, I_SIGNATURE.
      REFRESH : I_FILES, I_SIGNATURE.
      DESCRIPTION = FILE_NAME.
      FILES-DOC_COUNT = 1.
      FILES-DIRECTORY = FILE_PATH.
      FILES-FILENAME  = FILE_NAME.
      FILES-MIMETYPE  = MIMETYPE.
      APPEND FILES TO I_FILES.
    * -- fill components and signature structure                        -- *
      COMPONENTS-DOC_COUNT  = 1.
      COMPONENTS-COMP_COUNT = 1.
      COMPONENTS-MIMETYPE   = MIMETYPE.
      COMPONENTS-COMP_ID         = FILE_NAME.
      APPEND COMPONENTS TO I_COMPONENTS.
      SIGNATURE-DOC_COUNT  = 1.
      SIGNATURE-PROP_NAME  = 'BDS_DOCUMENTCLASS'.
      SIGNATURE-PROP_VALUE = FILE_EXTENSION.
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME = 'BDS_CONTREP'.
    *IF BDS_DOCTYPE_LIST-CONTREP = SPACE.
      SIGNATURE-PROP_VALUE = ' '.                               "#EC NOTEXT
    *ELSE.
    *  I_SIGNATURE-PROP_VALUE = BDS_DOCTYPE_LIST-CONTREP.
    *ENDIF.
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME  = 'BDS_DOCUMENTTYPE'.
      SIGNATURE-PROP_VALUE = WA_TOADV-AR_OBJECT. "'ZSRVCXLS'."TR001+
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME  = 'DESCRIPTION'.
      SIGNATURE-PROP_VALUE = DESCRIPTION.
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME  = 'LANGUAGE'.
      SIGNATURE-PROP_VALUE = VERSION_LANGU.
      APPEND SIGNATURE TO I_SIGNATURE.
      CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREA_TAB'
        EXPORTING
    *   LOGICAL_SYSTEM        =
          CLASSNAME             = 'BUS2222' "classname_select
          CLASSTYPE             = 'BO'" classtype_select
        CLIENT                = SY-MANDT
          OBJECT_KEY            = OBJECT_KEY
        BINARY_FLAG           = 'X'
    * IMPORTING
    *   OBJECT_KEY            =
        TABLES
          SIGNATURE             = I_SIGNATURE
          COMPONENTS            = I_COMPONENTS
        CONTENT               = I_FILE_CONTENT
    *   ASCII_CONTENT         =
    * EXCEPTIONS
    *   NOTHING_FOUND         = 1
    *   PARAMETER_ERROR       = 2
    *   NOT_ALLOWED           = 3
    *   ERROR_KPRO            = 4
    *   INTERNAL_ERROR        = 5
    *   NOT_AUTHORIZED        = 6
    *   OTHERS                = 7
      COMMIT WORK AND WAIT.
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFUNCTION.
    Message was edited by:
            Raja T

  • Not recognizing # while reading the file from application server

    Hi
    I am reading a file from application server. While reading into internal table with read statement the last field in each record is filling with hash symbol in the last digit. If I write any if condition with HASH symbol its not going inside the if condition, means its not recognizing as hash may be its internally treating as some other. I need to remove the hash from that field. How I can do that.
    Thanks,
    kishore

    I faced exact situation. Yes, internally its treated as some other special character. What i did was, becuase hash symbol was always coming at the end...i created a dummy field in my internal table so that it will not interfere with my actual data. When i see the data in my internal table, the hash always falls in the last field (dummy) which i will ignore. I could not get solution to remove this hash so i adopted this approach and it worked!!
    Hope it helps,
    SKJ

  • Autodiscover not working correctly when Office 365 integrated with Server Essentials 2012 R2

    Hello!
    This last weekend I setup our server as new and to ease the creation of users, integrated with our Office 365 (which to this point has worked fine) and imported the users. This had a somewhat unexpected side effect in that the import used the email address
    as for the user forename and then synced that change back to Office 365 and so needed to enter this information back in on the dashboard which synced back to Office 365. This may or may not have any relevance to our issue below.
    I should also point out that we have our own domain name so within the original Office 365 setup we had just one .onmicrosoft.com user with all the rest setup with our own domain name.
    At the weekend when it came to the client install, Outlook (2010 or 2013) would fail on the autodiscover with it asking again for credentials but critically displaying a server name of .contoso.com rather than the office365srvr.contoso.com . As I mention,
    Office 365 had been operating fine for some time and DNS records where checked and have been set for sometime. I spoke to Office 365 support and after a while come up with a temporary solution (so that I could complete the client installs) of assigning each
    user a onmicrosoft address, using that in the new account wizard to pick up the server correctly and then signing in the the Office 365 .contoso.com credentials.
    This worked OK to get us past the weekend (although I am having to reset up profiles on quite number of users where they get disconnected but with no credentials box appearing) but isn't a solution. The clients do not see public folders or their archives
    and of course we don't want to keep having to reset the profiles.
    I'm think that there must be something in the internal network that needs reconfiguring but I don't know what. I have tried pointing the client to an external DNS server just in case the internal DNS server was throwing the autodiscover out but this has
    made no difference.

    Ah - solved my own problem.
    Despite the domain DNS record looking OK and the Office 365 Portal domain checker not highlighting any issue, it looks as though the autodiscover is picking up an imap account provided by the web host.
    I've added an alias on the local DNS server to point to the Office 365 autodiscover server and this has solved the problem.

  • Can not see Oracle ODBC driver in Ms SQL Server 2007

    Hi
    I am trying to export an ms sql server table to Oracle using the Ms SQL Server 2007 export wizard and the only driver I found in the list is Microsoft OLEDB Provider for Oracle.
    I already installed Oracle client and I addedd an ODBC conenction of the datasources Why can I not see the Oracle ODBC driver?

    Which version of Oracle and what kind of Client Install
    Are you sure you did the full Client Install which will have ODBC ?
    Execute odbcad32 and look under Drivers Tab for Oracle ODBC Driver

  • Preview not functioning correctly with PDF files

    For some time I've put up with minor issues with Preview when viewing and editing PDF files.
    However, over the last little while it has gotten progressively worse. More and more PDF documents that I download, buy, print, or get from others are failing to display properly. Fonts will be wrong, images will be missing, or it is impossible to search for text or copy and paste from the files.
    The files in question are not encrypted, and they work fine in Adobe Reader on Mac and Windows, Adobe Acrobat, and even Foxit Reader in Windows.
    Does anyone have any idea what causes this and how it might be fixed, or is this just bugs in Preview?
    The problem has been getting worse, though I have insufficient information to know why.
    Another problem with Preview is that when I edit PDF files to annotate them, it is corrupting them somehow. What happens is I will do something like highlight text and insert a few notes using Preview, and then I'll save the PDF.
    From that point forward, searching no longer works on the file, and if I copy and paste anything from the file it is all garbage text.
    Again, I can do this without issue using Adobe Reader and Foxit Reader.
    I would prefer to keep using Preview so I thought I'd ask to see if anyone else is seeing these issues and has any ideas to fix them, or if the consensus is that there is currently no solution.

    The thing is, when I right click a pdf file, and then go to properties, change default program to open with, select browse, I select it in the correct folder, when I click open, it doesnt open and the programs stay blank, so I cant select anything. There is nothing to select. And I have re-installed. But at the end of the install there are no options what file types to associate with. Any way to do it inside Reader?
    I have reader 9.2.0. and Win7 up to date. When I'm opening and closing allot of files the whole time, I don't want to do inside reader. Help please?

  • Leopard not seeing Tiger on one machine

    Hi this is dead weird.
    I have upgraded my MBP tp leopard. On our network whether airport or ethernet I can see and mount 2 Tiger computers but not a third. they have exactly the same network settings I can see.
    All the tiget macs can see each other.
    any ideas?
    best
    tommy banana

    For the third one that can't be seen, try connecting it the first time using the IP address. So in Finder's menu, Go -> Connect to Server. Instead of browsing, enter the IP address for that Mac where it says Server Address. Click Connect.
    Since you say you can connect fine between all the Tiger Macs, I assume they all have File Sharing enabled *and started* in System Preferences Sharing pane.

  • HT2693 I need to report a problem with a tv show that did not download correctly. 1episode file can't be found & the other has sound & no picture. I no longer have the email invoice to file a report. Does anyone have a sugguestion on how I can proceed?

    If anyone has information on how to correct an issue with a tv show file not found after being downloaded and a tv show with only sound please help. I no longer have an email invoice to report the problem. Does anyone have a sugguestion on how to proceed?

    iTunes store support
    http://www.apple.com/support/itunes/

  • Premiere cs6 does not see correct images in media browser

    Hi Folks,
    I'm working on a project in CS6 Premiere (On an iMac with Mavericks running) and I cannot get the Media Browser to correctly see/import the still images (JPGs) I want to use. Instead, it sees all 8 images as the same image, though with different file names. I've reopened Premiere a few times, closed and opened Bridge a few times, renamed the files (Premiere still sees the original file names). Is it a matter of clearing the cache? If so, can someone explain that process?
    Thanks for your help!

    Thanks Ann,
    I tried that but Premiere is still seeing its original view of the images (all thumbnails are the same) - the newly saved image doesn't even show  up in the Media Browser.

  • Multiscreen HTML5: iPhone Output Not Built Correctly (Missing HTML Files)

    I need expert help to resolve this issue. Hopefully, this issue will sound familiar to someone, and they can provide some guidance.
    Since I started using RH10 a few months ago, I have delved into the details of Multiscreen HTML5 only as much as was needed to get the work done. I have an issue that has me flustered.
    By default, I am building my help project for all platforms (iPad, iPhone, Desktop, etc.), with iPad selected as the Default. The iPad & Desktop help both work fine, no issues.
    However, when I open the index.htm file in the iPhone folder, it opens the table_of_contents.html screen, which contains nothing but a search field. Additionally, many of the html files (that are in the iPad folder) are not being built for the iPhone folder (missing). When I look at the other folders (kindle_fire, or android_galaxy_tab for example) the files are all there and they work fine.
    When I compare the HTML for the Table_of_Contents.htm files for ipad and iphone, they are identical except the default file for iPhone is home.htm instead of table-of-contents.htm. But when I change the HTML to make them identical, I still have the same problem. When I open, it jumps to the searchresults.htm screen instead of displaying the Contents.
    When I wipe out the iPhone folder and rebuild it, the results are the same.
    So, somewhere, somehow, I have evidently unknowingly either selected or deselected something that caused the missing sections to be excluded (or not be built).
    I appreciate any help resolving this issue.
    Thank you,
    JimC

    Yes. Each device can have different content. It could be that some topics have tags and that layout has an expression that is excluding them.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for