Less than Useless

So for this newsgroup has been less than useless. Lots of questions, no
answers at all.
Has ANYONE gotten 6.0 to install under RH 7.1?
Why do you end up with /tmp/install.dir.xxx/Solaris/resource/jre.tar.Z?

For some reason not vouchsafed to us mortals, Red Hat 7.1 partitions the
hard drive by major
nodes in the directory tree - "/home" gets a partition, "/usr" gets one,
"/var" gets one, etc.
and the leftovers (such as /tmp) are crammed into a miniscule "/"
partition. You can see this
by issuing the "df" command. I did the following:
mkdir /home/bea_tmp
export IATEMPDIR=/home/bea_tmp
then installed the package. Finally, a
ulimit -s 2048
is required before actually starting WebLogic - otherwise the Java VM's
stack
overflows and it segfaults.
You can safely delete the IATEMPDIR after installation - it should be
empty.
Michael Girdley wrote:
>
Here's a workaround previously posted to the newsgroup:
"Glen Austin" <[email protected]> wrote in message
news:[email protected]...
Found it. Same problem as on Oracle 8.1.7 on RedHat 7.1.
1. Install the compat* RPMs from the RedHat 7.1 CD1 and CD2. These RPMs
allow compatibility with RedHat 6.2.
2. Put the following two statements in your environment prior to running
the install.
export LD_ASSUME_KERNEL=2.2.5
. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
These two statements will allow you to run your shell in a 6.2compatibility
mode, for glibc 2.1.3 instead of the new glibc 2.2.2 libs.
It sounds to me like Sun needs to update the JDKs to support the new glibc
and the 2.4 kernel. I'm not sure this is even BEA's problem?
Glen Austin
OmniSYS, Inc.
"Glen Austin" <[email protected]> wrote in message
news:[email protected]...
I installed jdk 1.3.1 from java.sun.com on a RedHat 7.1 O/S.
Originally, I was not pointing to the JDK correctly. I fixed the PATH,
CLASSPATH, JAVA_HOME, JAVA_PATH to point to the jdk1.3.1 dir.
Then I got an error saying that cut could not be found in /usr/bin, so I
ln -s /bin/cut cut in the /usr/bin directory.
I ran the install script a 3rd time and I'm seeing a [<defunct>] for myJava
VM in a ps -aef entry, which is in the process list along with the WLS
6.0
SP1 install bin file. I will try it one more time, but it's not looking
good.
Glen Austin
"Henri Jubin" <[email protected]> wrote in message
news:[email protected]...
You need to install the JDK 1.3.1 to have wls 6.0 working.
The JDK could be found at the developpers zone at javasoft.
root <[email protected]> wrote:
i tried installing the wls by using the command :
sh weblogic600sp1_linux.bin
i got the message ,
"Preparing to install..."
and thats where it stops !
any ideas ??
cheers
Pac
There's a couple other possible solutions listed here in the group as well.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
Buy the only book covering J2EE & WebLogic 6:
http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/102-1778325-
4765749
"Steve Ahlstrom" <[email protected]> wrote in message
news:[email protected]...
I've got 10G+ free -- that's not the problem.
I've seen many, MANY messages complaining about this particular problem
over the last few weeks and not seen one offering a resolution.
In article <[email protected]>, [email protected]
says...
This may be because you don't have enough disk space allocated
under the directory in which the installer is trying to unzip
the JRE part of your install. How much free space do you have on
the disk corresponding to your /tmp directory? You need 100s of
Mb free. If you haven't got enough you can set the IATEMPDIR
environment variable to a different directory which has more
space (e.g. export IATEMPDIR=/usr/tmp).
I agree with you this newsgroup tedns to be a bit short on answers. :-)
Chris
Steve Ahlstrom <[email protected]> wrote:
So for this newsgroup has been less than useless. Lots of questions,
no
answers at all.
Has ANYONE gotten 6.0 to install under RH 7.1?
Why do you end up with /tmp/install.dir.xxx/Solaris/resource/jre.tar.Z?

Similar Messages

Verizon store personnel and customer service less than useless!!

I'll try and make this as short and concise as possible:
1. went to Walmart to research cell phones and available carriers/plans.
2. Verizon rep Melissa was in-store, introduced me to the prepaid $45/month plan and talked me into a "new" Motorola Luge.
3. Researched the Luge, piece of crap two year old technology, rebranded Motorola M. Wanted to change phones, upgrade to Samsung S4 or Moto X.
4. Tried to buy replacement phone online through Verizon website. Could not do so without paying another $45 monthly charge.
5. Called customer service, was assured I could add the $45 for the new account I had to create in order to get the Samsung (which came with a new phone number) back on to my original account and phone number once I made the swap to the new phone.
6. Received the new S4, swapped SIM cards, S$ now has my original number, Piece of crap Motorola returned for credit, new account and number no longer needed/active, $45.00 not credited to my original account. WHAT A TOTAL RIP OFF!!
The only good thing about Verizon is the coverage. BIG WASTE of time going to talk to the imbeciles (mostly youngsters working on commission that just want to sell you stuff, not solve problems) or trying to call customer service. Obviously CS folks are either ill informed or completely dishonest!!!
BEWARE ANYTHING YOU ARE TOLD BY ANY VERIZON REP!!!
I WANT MY $45 CREDIT TRANSFERRED TO MY ORIGINAL ACCOUNT!!!!

If your phone is less than one year old, it is still covered by the manufacturer's warranty. I would take advantage of that and request another replacement. It's your right as the consumer to request replacements until you get a device that works, that's in the contract you signed. What's also in the contract you signed is that your replacements past the 14 day Worry Free Gaurentee period will be certified like new, AKA refurbished. Verizon doesn't hide that information from you before you sign, it's all right there in the black and white text of your contract.
As far as Verizon being unwilling to sell you a new iPhone for $199, they refused to do it because it would cost them money. When you signed your contract, you paid a subsidized price for the phone. Verizon sold you that device at a LOSS, and planned on receiving 20-24 months of revenue from your monthly plan to make up that cost. If they sold you a subsidized iPhone and put you in a new contract, they would never recover the LOSS that they took on the Blackberry Storm. You can buy a new phone from Verizon at any time, at full retail price. Buying a phone at full retail price is the only way to purchase a device that does not cost Verizon money up front.
My reccomendation? Get another Storm replacement and see how it goes. If that's still not the phone for you, look to eBay, Craigslist or friends/family for a used replacement. Prices on eBay are likely to pretty good for older models of the iPhone now that the new hotness has been released.

Does anyone know the authorized repair centers in Dubai for iPhones. Etisalat uses Technocare which are less than useless.

I dropped by iPhone 4S two days after buying it, and would therefore like to get the damaged screen repaired at the authorized service center.
I took it to Etisalat (the carrier where I bought it) and explained clearly that I am aware that this kind of damage is not covered by warranty, and that I will pay for the repairs.
They took the device, two weeks later it was returned un-fixed with a message saying "Physical damage is not covered by warranty".
I resubmited the device, this time writing "Please quote for replacing the damage screen at my own expense. I am FULLY aware this is not covered by warranty".
Two weeks later...<drum-roll> the phone is back un-fixed with a message saying "Screen physically broken, not covered by warranty"
So if anyone reading this has any suggestion on where / how to get this phone repaired without voiding the warranty please let me know. Clearly the carrier (or their service center Technocare) are clueless.
Thanks.

Thanks Ingo2711,
The pages you suggested point to the local carriers as the only authorized service centers.
The problem with Etisalat is that they outsourced that service to another company called Technocare.
That company sent the phone back twice (for the reasons mentioned above) and suggested that I have it fixed at a third party, which I am refusing to do since that will void my warranty. Additionally, they are refusing to give me any thing in writing to that affect.

How can I get rid of ios6 ? I have had this iPad for less than 2 weeks and,ade the mistle of "upgrading" to ios6 and now my map is completely useless. Feel like I have been robbed

how can I get rid of ios6 ? I have had this iPad for less than 2 weeks and made the mistake of "upgrading" to ios6 and now my map is completely useless. Feel like I have been robbed

There are alternatives. But none of them have Google street view, able to work on iOS 6. Apple should have offered this as a beta version, for a few more months instead of inflicting us with an inferior product. This iPad will probably be my last Apple product. A shame, because until last a few days ago, I thought the iPad and iPhone were fantastic.
Apple should quit their petty squabbling with, Google and Samsung and concentrate on supplying the best product.
Google and Samsung must be enjoying this particular fiasco.

I need to get 2 decimal places when using a formula for a quotient and Numbers will only give me whole integers which is useless since most items will be less than 1. How can I change this?

How do I get 2 decimal places when using a formula for a quotient? It only gives me whole integers. Most of the results will be less than 1 so I need 2 decimal places

the quotient function returns only whole number portion of the dividing two numbers. If you want the actual decimal value use the divide operator. you enter this as:
A/B
if the numerator is in A1 and the denominator is in B1 you can enter the formula like this:
=A1/B1

Less or less than equal in the for loop condition

Hi,
What do you prefer, what is more common, which one is more easily readable, less or less than equal in the for loop condition?
for (int i = 0; i < arr.lenght; i++){..}
//or
for (int i = 0; i <= arr.lenght - 1 ; i++){..}I know this is basic programming and nothing to do with Java, so if this forum is not for this purpose, could you please suggest a general programming forum?
I would really appreciate it as I have many general questions :)
Thanks in advance,
lemonboston

lemonboston wrote:
Hi,
What do you preferPersonal preference, which is useless to you
, what is more common,Based on years of reading open source code, the first
which one is more easily readable, less or less than equal in the for loop condition?Personal opinion, which is useless to you
I would really appreciate it as I have many general questions :)If you don't want to think about it yourself (which you should be doing in stead of asking general questions), simply attack it lazily. Both examples achieve exactly the same, but the first one is less to type and to read.

How is it I purchased a brand new phone less than 30 days ago and when defective I'm given a used phone and find a replacement sent slow mail?

I opened an account with added lines with Verizon about Nov 14th. Not 30 days has passed and yesterday in the middle of using my fully charged HTC One M8 Windows phone the screen went dark. I can hear incoming service but of course the phone is useless.
I was promised a replacement and told by the tier 2 support person last night that the replacement would be out overnight. I checked earlier and no status was available, and I checked now after waiting today for the phone, and now I see the phone was not sent overnight, and further that I will be sent a "like new" used replacement. I paid a substantial down payment and will be continuing to pay the new phone price, but now I am being given a used phone though still paying for new.
I am really unhappy about how this less than 30 day customer who is not going to a discount carrier is getting treated. Someone credited me for the few days service I am out...but that still does not resolve the used phone issue. Is this something I need to take up with the BBB?

Sucks, but it is in the contract you signed. Within 14 days, return the phone and get a new one, after 14 days, it is a used phone and gets replaced with a used phone. I had this happen to me, felt a bit cheated, but you know what, that phone lasted the entire rest of the contract without issues and continued to work when I passed it on to family.
The only alternative would be to work directly with HTC, the manufacturer of the phone and try to get a new replacement. However, almost every company does exactly what Verizon does in this situation. Since Verizon is keeping to the terms of the agreement you both agreed to, the BBB will not see any problem and not have any reason to act.

The initial heap size must be less than or equal to the maximum heap size.

All,
Please help!!
I have tested my Application Client Project in WSAD on my pc and it works fine.
I have 1gb RAM on my pc. When I deploy the same app on another xp pc(same as mine but 512mb RAM) I get a heap size error. Here is the exact error:
Incompatible initial and maximum heap sizes specified:
initial size: 268435456 bytes, maximum heap size: 267380736 bytes
The initial heap size must be less than or equal to the maximum heap size.
The default initial and maximum heap sizes are 4194304 and 267380736 bytes.
Usage: java [-options] class [args...]
(to execute a class)
or java -jar [-options] jarfile [args...]
(to execute a jar file)
where options include:
-cp -classpath <directories and zip/jar files separated by ;>
set search path for application classes and resources
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
Could not create the Java virtual machine.
Press any key to continue . . .
Here is the batch file that runs my app:
@echo off
SET appClientEar=C:\corp\apps\mts\jars\MTSClientEAR.ear
set JVM_ARGS=-Xms256M -Xmx256M
set CLIENT_PROPS=C:\corp\apps\mts\jars\medicalclient.properties
set APP_ARGS=
call C:\bnsf\IBM\WebSphere\AppClient\bin\launchClientBNSF.bat "%JVM_ARGS%" %appClientEar% "-CCpropfile=%CLIENT_PROPS%" %APP_ARGS%
@pause
I have changed the value of Xms and Xmx of JVM_ARGS to different size but I sitll get error. Anyone knows what the problem is. Thanks..

Don't know why, but the "maximum heap size: 267380736 bytes" value is just slightly less than 256*1024*1024, wheras the reported initial size is equal to that.
Try setting the initial value to 255MB.

How to report only quantities less than zero on a calculated field

I do not understand why my text will not work when it comes to reporting only 'Missing POs' less than zero, I assume it is because I am using 'int' on some fields?
Any advice?
SELECT
t0.father as 'Parent Code',
t2.itemname as 'Parent Description',
t2.frgnname as 'Parent Status',
t0.code as 'Child Code',
t1.itemname as 'Child Description',
t1.frgnname as 'Child Status',
t0.comment as 'Master',
cast(t3.onhand as int) as 'Child Uncommitted Stock',
cast(t3.iscommited as int) as 'Child Committed Stock',
(cast(t3.onhand as int) - cast(t3.iscommited as int)) as 'Child Free Stock',
cast(t3.onorder as int) as 'Purchase Orders',
(cast(t3.onhand as int) - cast(t3.iscommited as int)) + cast(t3.onorder as int) as 'Missing POs'
FROM
itt1 t0
inner join oitm t1 on t0.code = t1.itemcode
inner join oitm t2 on t0.father = t2.itemcode
LEFT JOIN OITW T3 ON T3.WHSCODE = T0.Warehouse AND T3.ItemCode = T0.Code
Where T3.WHSCODE Like '[%0]%' and 'Missing POs' < 0
ORDER BY
'Missing POs' asc, t0.father, t0.code
Many thanks,
Robin (I will be awarding points on all my outstanding questions shorlty - management time pressure at mo!)

Try this:
SELECT
t0.father as 'Parent Code',
t2.itemname as 'Parent Description',
t2.frgnname as 'Parent Status',
t0.code as 'Child Code',
t1.itemname as 'Child Description',
t1.frgnname as 'Child Status',
t0.comment as 'Master',
cast(t3.onhand as int) as 'Child Uncommitted Stock',
cast(t3.iscommited as int) as 'Child Committed Stock',
(cast(t3.onhand as int) - cast(t3.iscommited as int)) as 'Child Free Stock',
cast(t3.onorder as int) as 'Purchase Orders',
(cast(t3.onhand as int) - cast(t3.iscommited as int))
+ cast(t3.onorder as int) as 'Missing POs'
FROM
itt1 t0
inner join oitm t1 on t0.code = t1.itemcode
inner join oitm t2 on t0.father = t2.itemcode
LEFT JOIN OITW T3 ON T3.WHSCODE = T0.Warehouse AND T3.ItemCode = T0.Code
Where T3.WHSCODE Like '%0%' and (cast(t3.onhand as int) - cast(t3.iscommited as int))
+ cast(t3.onorder as int) < 0
ORDER BY
(cast(t3.onhand as int) - cast(t3.iscommited as int))
+ cast(t3.onorder as int),t0.father, t0.code

Less than a month and its already broken

Dear BT and Forum users,
I am not very happy with my BB service right now and have come on here in the hope that I might get more that platitudes and fob offs.
So... a few weeks ago my husband finally gave into the sales calls and agreed to have Infinity installed. Our reason - not so much faster internet but in the hope we might get a consistant service.The service we had before that was tempermental at best and we were sick of having to reset the router every other day. (in hindsight we should have just gone with an alternative ISP).
It was installed a couple of weeks ago and worked well until last Wednesday, since then the service has been a comedy of errors. To start with my husband confirmed from the outset that they problem was not coming from inside the house but the customer service operator insisted on booking an engineer.
We agreed to the Friday morning appointment. I booked the morning off work (using annual leave) and the engineer didn't show up. My husband called at 12.30 (they won't take calls from me as I'm not on the bill) and he was assured the appointment was booked in. Shortly after 1 I took a call at the home to say the "system" had lost the booking and the engineer wouldn't be coming.
I said I was in all day, he could come now but that was clearly off script and the call centre operative wouldn't enterntain the idea (annoyingly there were 2 BT vans in my neighbourhood that afternoon). Instead they wanted me to rebook another 4 hour appointment. I couldn't stop in Saturday and wasn't going to lose more leave. I said I would discuss the options with my husband.
What followed that afternoon was a series of coversations with them, some with me at home and some with my husband at work offering the same options and us giving the same response. I don't know if the operatives weren't talking to each other or didn't understand but it was really irritating. In the end they said they would call my husband at 4pm. They called some time after 5 and said the would try the exchange first and call us Monday morning if they needed to access the property.
Saturday 8.30 the engineer called to say they were on their way, we had the time so we waited. He arrived and was in the house all of 15 minutes before confirming the problem was in the exchange (all that time wasted for that!). We got a call Sunday to say they needed a new part at the exchange then today my husband got an undecipherable voicemail and a text saying the service will be fixed in the next 72 hours. He has spoken to them this evening and we're still non-the-wiser as now there's a fault further up the line.
Whilst all this is going on we have tried to find out if they expect us to pay for the Infinity and BT Vision whilst the services are not working. All they will say is they won't look at refunding losses until the issue is fixed. I realise they can't give us a total but it was a pretty straight forward question - am I paying for this non-service. One operator has said I can have £10 to cover the missed appointment (I value my time and annual leave a little higher).
In all honestly the loss of internet and BT vision is frustrating but what has really dissapointed me is the lack of customer service. No one in the call centres seem to have a clue what's going on (we've had so many versions of what's wrong) and are too tied to a script. There's no sense of inconvenience - I'm supposed to be ready and waiting for 4 hours at a time but they will fix it sometime in the next 3 day.
Right now I'm not even sure its worth waiting to get this fixed.
I'd love for someone to come on here and fix this for me but I'd settle for a little peer support/shared experience.
Thanks
L

OK, so I was being a little optimisitic. We're back online (yay!) but now the bill is just more of the same. Apparently we have to wait 48 hours before they will tell us how they are adjusting the bill I understand that they cannot confirm the problem si fixed yet because of some internal policy but they won't even tell us how much they would calculate as of now - a pretty straight forward question.
So with that, we threw in the towel... said if they can't asnwer a simple question we were off. Of course when I told then operator this he said he's put me straight through to his boss and then left me on hold for over 20 minutes before I gave up!
Called back to leaver dept. to be told we have to pay £200 to cancel (funny they could give us that figure pretty easily). I don't know what was said when he signed up but I am going to be investigating this further. We've had the service less than a month and its been broken a week.

I am having trouble sending bulk emails (less than 100 at a time) on my gmail account using group names created from my address book. I use Mail on my I-Mac. When I try to send out a bulk email, the message shows up that my server can't send them, etc.

I am having trouble sending bulk emails from a Mail Group (less than 100 at a time) on my gmail account. They come back saying the server can't recognize the data and try again with selected server or try later or edit message, all of which I have attempted a number of times, including re-booting the computer. I am wondering if there is something wrong in my Address Book? I have check Apple Preferences, and Mail Preferences and all seems in order. I can send to any of the individual addresses, but not in a group.
Thanks for your help.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

HT1212 My ipad mini has been crashing a lot recently so I started a system reset. However, it's now stuck with the progress bar less than a quarter gone: this has been the case for several days now. I have tried resetting from itunes but it needs the pass

Now it's stuck with the progress bar less than a quarter full. I have also tried resetting through itunes which works right up to the point where itunes states that it needs the passcode to be inputted into the ipad to connect to it. At which point it then sticks at the same progress bar point. HELP!! please, this ipad is really important to my work.

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
https://discussions.apple.com/message/19134562#19134562
Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

Macbook (mid 2012, 9,2) has very poor performance since the day I bought it (less than 2 months ago)

Problem description:
My macbook is extremely slow since the day I bought it (which was less than 2 months ago)…Came preinstalled with Mavericks and 4GB of RAM. Upgraded it to 16GB hoping that would help, but that did very little…then upgraded to Yosemite. That just made it worse. Formatted the whole thing and installed clean Yosemite. Still, every time I right click, I get the rainbow loading icon and it hangs. Every time I open any file, or click any app, it hangs for a few seconds, again with a loading icon. Every time I play a song on iTunes or even VLC for that matter, it stops multiple times, every few seconds. Feels like it’s “buffering” while I’m playing a song off my hard drive. It’s been bothering me for too long now…Any idea what the issue is exactly?
EtreCheck version: 2.0.11 (98)
Report generated 12 November 2014 23:55:47 GMT-3
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1920 x 1080
LCD TV spdisplays_1080p
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2 days 10:0:44
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (374.54 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
SIGMACHIP USB Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 6
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.18) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.18) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.18) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.18) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.teamviewer.teamviewer.plist Support
[running] com.teamviewer.teamviewer_desktop.plist Support
Launch Daemons: ℹ️
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.teamviewer.Helper.plist Support
[running] com.teamviewer.teamviewer_service.plist Support
[not loaded] org.virtualbox.startup.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Tuxera NTFS Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      20% mds
      6% Google Chrome
      4% WindowServer
      1% hidd
      0% Dropbox
Top Processes by Memory: ℹ️
481 MB Coda 2
258 MB Google Chrome
189 MB softwareupdated
189 MB loginwindow
189 MB Finder
Virtual Memory Information: ℹ️
5.71 GB Free RAM
7.22 GB Active RAM
2.63 GB Inactive RAM
1.62 GB Wired RAM
25.24 GB Page-ins
0 B Page-outs

If it has been slow since it came out of the box, it's probably defective. The warranty entitles you to complimentary phone support for the first 90 days of ownership.

SALE ORDER QUANTITY LESS THAN DELIVERY QUANTITY ? NO CECK IN SAP ??

Hello friends,
        I created a sales order of quantity 10 , having two material codes each having quantity 4 and 6 . i created delivery for the one by putting delivered quantity 4 and save , then i created delivery for second and put delivered quantity 8 which was greater than the sale order quantity left ,system saved the delivery and didn't popped any error message.
                                 Does SAP have options to over come this mistake by end users.
regards

Dear Joshi,
                  Please get in touch with your abap er as there user exits which can be written to avoid this situation.
                  Let me explain you further one more situation.
First one, Your query is if for item A ord qty is 6 the system saved the delivery with 8 qty which is greater than ordered quantity. I know the gives a warning doing this.
Second Situation :
Say item A ordered qty is 5, and i made a delivery for 3 and saved it. Now the open quantity on the order is only 2. (5 -3 =2). But one of our users reduced the ordered quantity to 2 despite saving a delivery with quantity 3.
so the situation is ord qty is 2 and delivered is 3 qty. which is again wrong. But while reducing the ordered quantity less than the delivered quantity the system gives a warning message telling " ORDERED QUANTITY IS LESS THAN DELIVERED QUANTITY ".
Also just imagine we made delivery for qty 5 and invoiced it.After which you reduced the delivered quantity to say 3. So delivered is 3 but invoiced is 5.
Hence for these kinds of practical problems we have addressed them through user exits with the help of our ABAP'ers by turning those warning messages into error messages by selecting the suitable message class.
Hope the explanation helps you. And thanks for all your patient reading.
Reward points if useful.
Thanks & Regards
Sadhu Kishore

Less than Useless

Similar Messages

Maybe you are looking for