Lexmark x7675 cannot scan wireless, print wireless ok

started acrobat, will not even see scanner, neither does preview, used the lexmark software Series Center, can see printer/scanner, added scanner, tried to scan, says cannot communicate....

http://support.lexmark.com/index?productCode=LEXMARK_INTUITION_S505&page=product &locale=en&userlocale=EN_US#1
update the driver, select apple /Mac and your current OS X 10.9.

Similar Messages

  • Cannot connect and print wirelessly - HP Deskjet 3520

    Hey there,
    I have a HP Deskjet 3520. It was working without a problem for a while. However after moving house and resetting everything I cannot print wirelessly with this printer.
    It is connected to a network and the blue light is permanent, but when I try to print or scan wirelessly it says the printer is not detected/connected.
    I've tried to connect using every method available i've seen every video and i've read every blog post. Please can you offer some help before a HP device is mentioned on the news for seriously injuring a passer by after being thrown out of a window? 
    Thanks :-)

    Hi @tytycadet , and welcome to the HP Forums!
    I can see you're experiencing connectivity issues.  I'd like to help!
    Before we get started, I just need a little info.
    Are you using Windows or Macintosh?
    If you are using Windows, is it a 32-bit or a 64-bit system?
    I'm including documents that will help you find the system info:
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Photosmart B209a setup cannot connect to printer wirelessly

    I've had a Photosmart b209a printer for about 2 years and used it with no problem.  Couple of weeks ago upgraded to windows 8.1 and then neither of my two printers would print.  Long story short, I restored the computer back to windows 8 (which was factory installed) and can now print on my laser printer but not the Photosmart.  I have tried and retried installation and setup and always get the same problem:  The IP address is visible on the router's list of network devices, it is visible on the printer's front panel in wireless settings, and when installing the software with USB it can see the IP address when trying to setup wireless connection.  Then, the setup says it cannot connect to the printer.  It sees the printer, attempts to contact the IP address, returns the following:
    "Your computer is unable to communicate with your printer at 192.168.1.114. This may be caused by firewall software. If you are using firewall software, verify that UDP port 427 is unblocked for both inbound and outbound traffic.
    Your PC can not communicate with your printer at address 192.168.1.114. Check all cable connections. Check that the printer, PC and router are powered on and connected to the network."
    Obviously, the PC and router are turned on and connected.  I even went to the security software and turned off the firewall AND created a new UDP port 427 and still no luck.  What has happened to my printer???

    Hey sue_M,
    The first step that I would suggest, would be to run the HP Print and Scan Doctor. I have included the document 'Try the HP Print and Scan Doctor for Windows'. This will walk you through the download, as well how to use the tool.
    Now to confirm a couple of questions with you.
    1. What firewall do you use? (ie. Norton, Windows, MacAfee)
    2. Do you just have the one firewall, or multiple firewalls?
    3. For the UDP 427 port, have you made sure that this port is open in your router firewall?
    Looking forward to your answers.
    I worked on behalf of HP

  • HT204135 print wirelessly from Macbook to Epson

    How can I setup the wireless printing feature? Mac cannot see the printer wirelessly, functions ok when USB cable is connected. Previously software disk provided app wiz to help with the process.
    Thanks

    andrewfromfontana wrote:
    Previously software disk provided app wiz to help with the process.
    Have you checked the Epson web site for a new version of this application so that you can connect it to your wireless access point?
    What model of Epson do you have? Someone here may have the same model and be able to explain what other options you have to connect to a wireless router, such as using the keypad on the printer.

  • Real wireless printing with airport extreme

    My D-link 615 router and Brother HL-3070CW work flwalessly for two years.
    I decided to get an AEBS when D-link gave up. I thought I will be able to connect my printer to the AEBS as easily as I did with the D-link.
    I have a sony desktop/windows 7. I cannot connect my printer via USB port. I need a way to wirelessly connect my printer to the AEBS.
    My problem is that the printer cannot detect the wireless network after I installed the station. I tried to reinstall the printer but it did not work.
    I really like the dvice, but I cannot keep it if I cannot connect the printer wirelessly to four computers. I do not have a wired netwrok.
    Is there any way or link or instruction that can help me solve this issue. I apprecite your input and let me know if I need to add any missing details.

    Anyone?

  • I have a imac and a pc laptop set up with my wireless lexmark x7675 printer through my bthome hub network, but cannot get macbook pro to work

    i have a lexmark wireless printer, its connected to my imac via wireless bthome hub connection, works fine, so does my pc laptop.  but when it comes to connect my macbook pro aswell it wont work.  i have installed lexmark drivers on macbook, i have follwed the wireless connection setup and plugged in via usb port. it says it has connected successfully, but it will not print.  i had it connected at one point, but would only print if the imac was on, but now it wont even do that.
    please help, it seems like instead of connecting through bthome hub it wants to connect to my imac, how do i change this?

    Well there would probably be different settings for the wireless.
    For example, with a Lexmark printer although I needed to do nothing to get it to work via USB, to get the wifi working I had to use a special setup option for getting the wifi to work on my pc.
    You can probably download the manual for your printer from the manufacturers website, and it should tell you how to get it to work with your printer.

  • Wireless printing lexmark s405

    I have purchased a lexmark s405. It is setup and installed. It will scan over the wireless network but will only print via USB. This kind of defeats the reason for changing my printer. Anyway while attempting to print over wireless everything comes up as normal (print utility box) but it then fails to print. Printer unavaliable etc.... Any help would be much appreciated. I have already spent hours on this which is not supprising as it seems a common fault on the web searches and no solution. Regards

    Hi
    I know exactly how you feel. It has taken me many days to finally resolve my wireless printing problems. although I do not have the same lexmark printer as you have mine being the x7675 (which I know many people have had with this model which I have now finally resolved for my self) as you have been able to install your printer I can see that you have come up against a problem I had at my final hurdle.
    All installed yet when I first tried to print nothing happened. solution is to check whether your printer is on PAUSE which it sounds to me that it is. Go into printing que and firstly delete the whole que which I suspect that you have acquired then select one item to print and press the pause button which should then print.
    I have also found that whilst my Internet is extremely fast printing suffers rather a lot of lag mine takes up to 30 seconds to print once I have selected print. So be patient before selecting print again. Although we have different models of lexmark I am pretty sure from what you are saying is that the printer is on pause (as I had exactly the same problem) and once you click on the pause all will be ok.
    Let me know if it doesnt work

  • Laptop cannot find wireless printer HP 2540

    Trying to connect my Acer laptops to HP Deskjet 2540 All-in-one printer.   Printer is connected to wireless network. 
    My laptops cannot find the printer.  I have tried everything suggested, apart from disabling my firewall  which I am reluctant to do as I do not want to have my laptop so vulnerable.  
    Did not have any problem connecting a Windows 7 laptop to former printer, which was a Lexmark wireless model. 
    One laptop is using Windows 7, the other Windows 8.1, but both have the same problem.  
    I am not very technically astute and also I am quite old, so if anyone can help, please keep it simple.

    Hi mev2911, and welcome to the HP Forums! 
    I understand that you are no longer able to get connected to your HP Deskjet 2540 All-in-One Printer on your wireless network. I suggest that you follow the steps in this document for Printer Does Not Maintain Wireless Connection. I suggest that if your computers are not seeing the printer, that you power cycle your network first as this may resolve your issue.
    How to power cycle network
    Follow these steps to reset your HP printer, your wireless router, and your computer.
    1.Press the Power button on the HP printer to turn it off.
    2.Disconnect the power cord from the rear of the HP printer.
    3.Disconnect the power cord from the wireless router.
    4.Turn off the computer.
    5.Wait 30 seconds.
    6.Reconnect the power cord to the wireless router.
    7.Wait 30 seconds, or until the router is fully on and ready.
    8.Turn the computer back on.
    9.Wait for the computer to reload.
    10.Reconnect the power cord to the rear of the HP printer.
    11.Turn the printer back on.
    I hope this information helps, please let me know how it goes.
    Thank you and have a great day!
    I worked on behalf of HP.

  • Should I  be able to use a Lexmark Pro 205 wireless printer from my iPad 1?  My iPad can't find the printer.  Iveinstalled the Lexprint app on iPad and downloaded the Lexmark Listener on desktop computer. Still can't print from iPad.

    Should I be able to use a Lexmark Pro 205 wireless 3 in 1 printer with iPad 1?  I have installed the LexPrint app on iPad, downloaded the Lexmark Listener on desktop computer but still can't print from iPad. My iPad cannot find the printer.  But I can print from desktop without USB cable. I upgraded the system on my iPad sometime ago.  Suggestions??

    Here is the list of AirPrint printers, and you particular printer is not on it.  So that means you will need to use the Lexmark app, and print through your computer.
    There is a Lexmark guy that hangs around these forums who may chime in with a response as well.
    http://support.apple.com/kb/ht4356

  • HP LaserJet M1536dnf cannot connect to internet but we are able to print wirelessly.

    I connected our HP LaserJet M1536dnf MFP via USB to our Aiport Express...  I was able locate and add it using the Print & Scan function in System Tools (and I am able to print wirelessly) but we cannot scan from our computers or use AirPrint.
    I pulled up a Network Summary and it says it the Network Cable is disconnected. After reading some other users' feedback, I found a suggestion of using an ethernet cable, rather than USB, so I tried that - no change.  Right now I have both the USB and ethernet cables plugged in...  still no luck.
    Worth noting (maybe?) - when reset the Airport, the light next to the Ethernet plug blinked a few times but then went out.
    Seems weird that we would be able to print wirelessly while it says it's not connected but maybe these are two different things?
    Help please, this is the third printer we've purchased in the last 2 months and I'd *really* like this one to work.

    Sorry, it's my Desktop PC that the Router and Modem are connected with.
    I went into the thing with my IP addy into internet explorer. I couldn't find where to change the IP and all the stuff with the IP seemed normal. None of them had the one that the router said it was operating on.
    If I create a NEW umm channel, or whatever, will I have to redo the Laptop and my Xbox config wirelessly? I should note I had a friend install all of this router/wireless stuff for me, since I am nto good with this kind of thing. So, I'm not completely up on how to do all this stuff. I was gonna ask if he could do something but I haven't got the chance to talk to him, so I came to you guys.
    That's where the situation stands right now. I just wanna make sure I'm not setting myself up for hours of work. I'm sure it's easy, since he didn't take too long setting it up. But I don't like messing with things that might screw up my system/modem etc beyond what it is already.

  • Cannot print wirelessly from MacBook Pro OSX Mavericks

    I cannot get my new MacBook Pro (using OSX Mavericks) to communicate with my HP Officejet4500 Wireless.  I can print when I use a connecting USB cable, but cannot print wirelessly.  All of my Mac software updates are current as of 4/20/2014, which included an update for HP printers.  When I used the disk to install the printer software, it did not have a screen for entering my wireless router ID or passcode.  In the Mac System Preferences for Print and Scan, my Officejet 4500 G510n-z is listed, but to no avail.  What do I have to do to get my Mac to print wirelessly?  Thanks.

    OK, thanks for that.  It may indeed may be the problem, but let's check a couple of things first.
    1. On the printer: Setup > Network > Print Network Test.  Is the printer connected to the network?  If it is not:
         a. In the Network menu, Restore Defaults
         b. In the same Network menu, run the Wireless Setup Wizard to connect the printer to your network.
    2. On your Mac, download and install this: http://support.apple.com/kb/DL907
         Restart your Mac.
    3. Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP OfficeJet Pro 8600 - will print wirelessly but not scan on Windows 8.1. HP PC

    Hello,
    my HP printer and HP computer have been working perfectly but now all of a sudden I cannot scan anymore from my printer to my computer. I can print and scan the other way around and the wireless network works. I am just a regular user and don't feel sure about how to uninstall and re-install programs, so I would be very happy if you had just a simple fix
    I already tried closing down everything and unplugging the router, then plugging the router and turning everything on again but it didn't help.

    Hi @gabmus,
    Welcome to the HP Forums!
    I see that you can print but not scan wirelessly with your HP Officejet pro 8600 on Windows 8.1. I am happy to help you with your scanning issue!
    To verify the printer's hardware is working, are you able to make copies with the printer? Copying a Multipage Original.
    In the meantime, please go through the steps in this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays When Scanning for HP Officejet....
    Hope this helps, and have a great day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP Officejet Pro 8600 Plus losing wireless connectivity, cannot scan to computer

    In our office, we have roughly 4 computers using the HP Officeject Pro 8600 Plus, all of which are connected wirelessly. The printer was previously connected to the internet wirelessly with no problems. A couple of days ago however our computers started randomly disconnecting. The printing function would work for a bit, then disconnect. I found the only solution to this problem was to hit the button on our wireless router that resends the wireless signal out for connectivity. 
    We hardwired the printer with an ethernet cable and I myself didn't see any further problems regarding connectivity but a couple of the other computers had spotty connections.  Again, each time this can be remedied by hitting the button on the wireless router.
    Today  however we had an additional problem, after trying to scan a document through the automatic document feeder, the printer said it was jammed (although it wasnt). When we went to rescan, the scan to computer function was no longer working. I can scan by hitting the scan button on my HP Printer Assitant interface, and I can also scan to email, but cannot scan to computer.
    I have gone through several forums and haven't been able to find a solution. I personally use Windows 8, but other people in our office are using older versions of Windows. We've tried unplugging, restarting, hardwiring, resetting wireless settings, uninstalling, etc. etc. Before a few days ago the pritner was working fine for a number of months.
    If anyone has any ideas they would be greatly appreciated.

    Hi rtaw,
    Welcome to the HP Forums!
    I understand that you cannot scan to computer, and that you are losing wireless connectivity, with your HP Officejet pro 8600 Plus. I am happy to help you with this issue!
    Please take a look through this wireless guide. Printer Does Not Maintain Wireless Connection.
    For the scanning, please see this guide. A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
    Hope this information helps you, and let me know if you have any more issues!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HT2495 I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, but can't find the printer on the add printer and scan icon on preferences.

    I have a wirless network. I connect all my computers to it and a printer. I can print wirelessly from all computers. I tried to add the printer to my new Macbook, which is connecte to the network, but can't find the printer on the add printer and scan icon on preferences. I downloaded a installation printer utility from the Manufacturer (lexmark), but it didn't work. Any sugestions?
    Thanks,
    Ivette

    You would need to get the IP address of your printer then manually add a network print queue.
    To get the IP address, on the control panel of your printer, press on Setup > Network Setup > TCP/IP > View/Set IP address.

  • DexterM - Printer connected wireless but Notebook cannot connect to printer?

    Hi all,
    I will be a brief and clear as possible. I really hope someone can help! thanks in advance.
    DexterM, if your still arond I think maybe you would be familiar with this type of thing. I will be as concise as possible.
    I incorrectly removed some HP folders in an effort to remove the bloatware. (shop and participation program etc).
    Anyway, I damaged my install because Solution Center disappeared! I needed it to scan multiple page PDF docs.
    I tried to uninstall and re-install the Full Software package (my printer is B110a) 10s of times. Each time the Installer showed that 'Solution center' is already installed. It was not installed.
    Eventually after days of trying to fix this, I took the drastic measure of remving some HP keys from the registry. Not randomly of course, but from a solution post on this board. I only removed about 4 HP keys. I was very careful not to remove any Windows ones. (I se Win7).
    So.. Solution center then installed. Hooray! Everything seemed perfect. EXCEPT....
    I had removed 2 keys related to the Network. Something like NET HPz12 and something similar. 
    Now when I tried to connect my printer wirelessly (using the USB to wireless process) it cold not find any wifi networks even though there were several in the vicinity.
    I found a solution on this forum which involved right clicking on the network.msi file and choosing uninstall, then re-installing it. This did the trick! now when I ran the "USB to Wireless" process it instantly found my wireless "your PC is connected to SSID blah blah blah, is this correct". Yes. It continued the network diagnostic but always failed at this point.
    I think because some service or reg key is missing the computer cannot commnicate directly with the printer, but it can see it at http://192.18.1.2 etc via browser. so all is connected properly, but something is preventing the laptop from commnicating with the printer. 
    So to recap.
    Laptop works perfectly with printer via USB.
    Printer is connected to my wireless without isse. I can see it at http://192.168.1.2 etc
    Laptop cannot connect to printer though, and fails everytime I run the 'usb to wireless' process.
    I suspect one of the NET keys I deleted frmo the reg is to blame? Or some missing windows service?
    The network diagnostic utility says "network software missing, please reinstall or fix and try again". I have uninstalled and reinstalled 10s of times now. It's not putting back no the required network service/key thats missing.
    Argh. please can anyone help. Someone must have been here before? I have a screen shot too of the 'USB to wireless' process failing. It shows the connection is there, but something is not right.
    image 0 - the 'usb to wireless process' picks up my wireless without any problem. ok
    image 1 - during the 'running diagnostic on network' part of the process it fails
    image 2 - not much to go on here. I reinstalled and uninstalled 4 or 5 times already. same thing. 

    Nobody? Im really stuck here... Been onto support 3 times and they cannot help. I need someone with expert skills who will understand which windows service or driver or key is preventing the notebook from talking to the printer even though both are on the same network successfully. No AV or FW on the network either.

Maybe you are looking for